aboutsummaryrefslogtreecommitdiff
path: root/init.d/Makefile
AgeCommit message (Collapse)Author
2018-11-07Create save-keymaps and save-ktermencoding servicesWilliam Hubbs
These services represent the parts of the keymaps and termencoding services which saved the settings back to the root file system so they can be loaded very early in the boot process. These are needed to allow keymaps and termencoding to run earlier in the boot sequence. X-Gentoo-Bug: 446018 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=446018
2018-03-16init.d/modules: add code from modules-load serviceWilliam Hubbs
There is no reason for these to be separate services. I did add a provide so that we don't break backward compatibility.
2017-11-28split cgroups mounting out of sysfsWilliam Hubbs
This is neceessary to allow cgroups to be mounted in an lxc/lxd container. Fixes https://github.com/openrc/openrc/issues/187
2017-04-05Fix make install on FreeBSD: don't try to install /etc/init.d/modules twicei.Dark_Templar
2017-03-09add agetty serviceWilliam Hubbs
The agetty service is an alternate way to manage gettys with agetty under Linux which is separate from an external init system.
2016-12-01split tmpfiles processing into opentmpfilesWilliam Hubbs
The openntmpfiles package is designed so that it can be used on systems independently of whether openrc is used.
2016-09-05remove swapfiles serviceWilliam Hubbs
The swapfiles service was basically a copy of the swap service, so this commit consolidates the functionality into the swap service. X-Funtoo-Bug-URL: https://bugs.funtoo.org/browse/FL-2523 X-Gentoo-Bug: 568162 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=568162
2016-08-25Add modules-load.d supportWilliam Hubbs
2016-07-27Add support for runitWilliam Hubbs
X-Gentoo-Bug: 501364 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=501364
2016-07-19init.d: combine sysctl scriptsWilliam Hubbs
We had separate sysctl scripts for each operating system. However, there is no need to do this since we can detect the operating system at runtime with $RC_UNAME.
2016-07-18modules: add support for FreeBSDWilliam Hubbs
This is based on a patch submitted by Joe Maloney <pkgdemonteam@gmail.com>. This fixes #91.
2015-10-20Add net-online serviceWilliam Hubbs
2015-05-11Add support for the s6 supervision suiteWilliam Hubbs
2015-04-20Add binfmt service to sysinit runlevelWilliam Hubbs
This makes binfmt processing behave like tmpfiles processing which follows the same specification as systemd. This fixes #48. X-Gentoo-Bug: 545162 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545162
2014-10-27Add osclock serviceRalph Sennhauser
This scripts sole purpose is to "provide clock" on OSs that already take care of the clock being properly set.
2013-08-13Remove gentoo's net.* scriptsWilliam Hubbs
It has been determined that it will be best for gentoo's net.* scripts to be in a separate package to allow independent development. This package will be called netifrc and maintained by Gentoo.
2013-07-25Introduce the tmpfiles.dev serviceWilliam Hubbs
This service handles setting up the tmpfiles entries for the /dev directory for Linux systems which needs to be run in the sysinit runlevel.
2013-04-08create loopback serviceWilliam Hubbs
The loopback service handles the basic settings for the loopback interface, regardless of the network manager you are using.
2012-10-31Tmpfiles: create and delete entries once in the boot runlevel.William Hubbs
Initially, we were creating tmpfiles entries in the sysinit runlevel and again in the boot runlevel. Systemd runs the --create and --remove options in one service called systemd-tmpfiles-setup after the local file systems are mounted. Now we have a service called tmpfiles.setup which emulates this. This also closes the bug mentioned below, since we were originally writing to files that were on read-only file systems and that were not available. Reported-by: <devurandom@gmx.net> X-Gentoo-Bug: 439012 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
2012-09-26tmpfiles.d init.d scriptsRobin H. Johnson
Now that the tmpfiles.d code is more tested, actually call it from init.d. It assumes that /run is already available when it runs. Please note it runs TWICE. - During sysinit, ideally just after /dev/shm is created, but before udev has started. After udev is also acceptable, but not ideal. - During boot, ideally just after localmount has completed. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-07-15Import encswap init script from FreeBSDRichard Yao
The FreeBSD encswap init script has been adapted to function in OpenRC. It should function identically to its FreeBSD counterpart.
2012-07-10fix the upstream default network stackWilliam Hubbs
The OpenRC upstream default network stack was changed, but there was no reason to change it. Now since we have the MKNET build switch, it is easy for the gentoo ebuild to install oldnet by default. The upstream default is newnet.
2012-07-10add the MKNET variable to select a network stackWilliam Hubbs
The MKNET variable can be used to select the network stack you want to build and install with OpenRC. The current default is the gentoo "oldnet" stack. If you want to install the OpenRC newnet stack, use MKNET=newnet on the make command line.
2012-07-08Revert "Deprecate the network and staticroute scripts"William Hubbs
This reverts commit 5994e55937cbbb71b1c22ad829b77a1bcd8c3793. There are situations where these scripts can be useful, so I am bringing them back. Also, I want to start discussions about simplifying the OpenRC network stack.
2012-02-13Improve swap handlingWilliam Hubbs
Modify the swap script so it starts before and stops after localmount. Also, on linux, this script should skip mounting swap on loopback. Add a swapfiles script which runs after localmount and is designed to activate additional swap space which could not be activated before localmount was run. This includes loopback swap on linux and swapfiles which are on local file systems that were not mounted when swap was activated initially. The start code does reactivate swap that is already active, but this is not an error condition. Reported-by: Giampaolo Tomassoni <giampaolo@tomassoni.biz> X-Gentoo-Bug: 401003 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401003
2011-12-03Integrate migrate-run into bootmiscWilliam Hubbs
The migrate-run service was hanging when parallel startup was enabled because of its dependencies. This integrates the logic for this service into bootmisc, which will avoid the issues with parallel startup. I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his input on this patch
2011-11-23Migrate /var/lock and /var/run to /run for linux systemsWilliam Hubbs
2011-11-16Deprecate the network and staticroute scriptsWilliam Hubbs
These scripts are not supported, and they have several major design issues such as not being able to stop, start or allow a dependency on a single interface.
2011-10-29Use pattern rules instead of suffix rulesWilliam Hubbs
Rework the makefiles to use pattern rules instead of suffix rules. This is the preferred way to write implicit rules according to the gnu make manual.
2011-10-20further clean up OS differences in makefilesMike Frysinger
No need for if() logic. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18consolodate MakefilesWilliam Hubbs
The tree contained many operating system specific Makefiles which were being included in other Makefiles. This commit removes those and adds the code to the makefiles which included them using make's conditional processing. X-Gentoo-Bug: 387441 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
2011-02-04remove unnecessary shell callsWilliam Hubbs
The main makefile, init.d/Makefile and src/librc/Makefile all contain several shell calls which can be handled as make conditionals. This switches them to conditionals.
2011-01-31use immediate evaluation for shell callsWilliam Hubbs
This reworks the shell calls in the makefiles to use immediate evaluation and should improve parallel building. X-Gentoo-Bug: 289264 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
2009-10-16Add a new staticroute init script so that .... static routes can be configured!Roy Marples
Fixes Gentoo #288421.
2009-10-13Add new utility and init script swclock that sets the system time based onRoy Marples
the mtime of a file. It saves the shutdown time to this file also. This is handy for systems without a working RTC chip. Based on an idea by Michael A. Smith <michael@smith-li.com>. Fixes Gentoo #272073.
2009-04-19Default to not building the old net scripts.Roy Marples
2009-04-17Add MKOLDNET=yes/no toggleRoy Marples
2009-04-16Add a new init script - networkRoy Marples
This simply assigns static addresses and an optional default route. It's possible to add external commands as well, so to create a bonded interface. Hopefully we can add a few examples to satisfy most of the old net.lo, which is no longer installed into boot by default.
2008-11-03Add a new shutdown runlevel, Gentoo #224537.Roy Marples
Split halt.sh into halt, killprocs, romount and savecache services. The reboot runlevel is removed but mapped to shutdown. The halt script should be moved to the sysvinit package.
2008-05-06Ensure that make dep ordering is correct for install.Roy Marples
2008-04-29We need to ensure that the init script started is correct, translating ↵Roy Marples
symlinks. This has a new rule - multiplexed services must exist in the same dir as the master sript. So we need to ensuret that net.lo(0) is the real script and not a symlink itself. This fixes Gentoo #219526.
2008-03-25Rework our folder structure so that we don't have OS specific dirs, making ↵Roy Marples
it easier to share init and conf files per OS.
2008-03-05Add tunable SYSCONFDIRRoy Marples
2008-03-03Use exlicit make targets, not directory contents.Roy Marples
2008-01-10Allow for OS and SUBOS folders so we can introduce NetBSD scripts whilst ↵Roy Marples
keeping BSD for all BSD's.
2007-11-20Introduce CONTENTS variable into Makefiles to list the contents of the ↵Roy Marples
directory, excluding the Makefile for to Make life easier
2007-11-19Our build chain now works with GNU and BSD make implementationsRoy Marples
2007-04-05Rewrite the core parts in C. We now provide librc so other programs canRoy Marples
query runlevels, services and state without using bash. We also provide libeinfo so other programs can easily use our informational functions. As such, we have dropped the requirement of using bash as the init script shell. We now use /bin/sh and have strived to make the scripts as portable as possible. Shells that work are bash and dash. busybox works provided you disable s-s-d. If you have WIPE_TMP set to yes in conf.d/bootmisc you should disable find too. zsh and ksh do not work at this time. Networking support is currently being re-vamped also as it was heavily bash array based. As such, a new config format is available like so config_eth0="1.2.3.4/24 5.6.7.8/16" or like so config_eth0="'1.2.3.4 netmask 255.255.255.0' '5.6.7.8 netmask 255.255.0.0'" We will still support the old bash array format provided that /bin/sh IS a link it bash. ChangeLog for baselayout-1 can be found in our SVN repo.