aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-11start loopback interface before mtabWilliam Hubbs
X-Gentoo-Bug: 292894 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=292894
2011-04-10remove "after bootmisc" dependency from loopback interfaceWilliam Hubbs
2011-04-10bring up the loopback interface earlierWilliam Hubbs
For most situations, the loopback interface can depend on root instead of localmount, so this patch makes that happen. It also adds comments to the net.example files explaining when a user might want to change this and giving an example. I would like to thank Robin Johnson for the original patch and suggested examples. X-Gentoo-Bug: 292894 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=292894 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-04-09add fallback_routes support to network scriptsWilliam Hubbs
Add support for optional fallback_routes_* variables in the network scripts. This is similar to the fallback_route_* support in baselayout-1. However, if you do not have fallback_routes set for an interface but you do have routes set, that setting will be used, so you do not need this variable unless you want the fallback routes to be different from the primary routes. X-Gentoo-Bug: 250978 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=250978
2011-04-09typo fixWilliam Hubbs
X-Gentoo-Bug: 217999 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=217999
2011-04-08clarify documentation for -timeout keywordWilliam Hubbs
2011-04-08do not timeout waiting for bootmisc to completeWilliam Hubbs
It is possible for bootmisc to take longer than 60 seconds to complete and services should not time out waiting for it. X-Gentoo-Bug: 360405 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360405
2011-04-07fix typo in ethtool.shWilliam Hubbs
This was causing the ethtool interface to not work. X-Gentoo-Bug: 360481 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360481
2011-04-07fix typo in staticrouteWilliam Hubbs
X-Gentoo-Bug: 362205 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=362205
2011-04-01remove hard coded directory paths from link flagsWilliam Hubbs
Currently, we do not see a reason for these, and it causes an issue for cross compilation. X-Gentoo-Bug: 361465 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=361465
2011-03-29Bug #360963: Improve interface naming/set_name_type documentation on new ↵Robin H. Johnson
vlan code. This is primarily for users with set_name_type settings from previous sysadmins can easily see what changes to make. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-03-27remove bashism from ethtool moduleMarc Joliet
X-Gentoo-Bug: 360367 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=360367
2011-03-25bootmisc: clean up tmpdir cleaningMike Frysinger
Make sure that the `cd` into the $dir actually happened. This we don't have to worry about relative paths deleting stuff it shouldn't. This step shouldn't fail, but who knows, and better to be sane than to wipe out someone's valuables. When wiping, automatically fall back to a dedicated `find` if the initial `rm` failed on us. This should help with the speed issues related to the later `find`. Have the later find only search the top level allowing `rm` to walk the directory contents. This means that -xdev no longer applies, but since the earlier `rm` wasn't doing -xdev either and no one has complained thus far, let's assume it isn't an issue. Also convert to the -exec...+ form so that we don't have to worry about long argument lists, and add -- to the `rm` that was previously missing. In practice, this shouldn't matter as we've already deleted all those files, but better safe than sorry. When cleaning, since we've already done a `cd` into the $dir, no point in prefixing all the paths with $dir too. Go with the relative loving. Signed-off-by: Mike Frysinger <vapier@gentoo.org> X-Gentoo-Bug: 359831 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=359831
2011-03-24rework test for mounted /procWilliam Hubbs
The previous test assumed that we could always rely on the minor fault counter to change between reads of /proc/self/stat, but we found that this is not the case. The new test compares two reads of /proc/self/environ for which we have set the same environment variable to two different values. If the comparison shows the two reads have the same contents, we know that /proc is not working. I would like to thank Robin Johnson and Mike Frysinger for their input for this patch. X-Gentoo-Bug: 348416 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=348416
2011-03-23termencoding needs root to be mounted read/writeWilliam Hubbs
X-Gentoo-Bug: 360215 X-Gentoo-Bug-URL: http://bugs.gentoo.org/360215
2011-03-22release openrc-0.8.0William Hubbs
2011-03-22update documentation for windowkeys variableWilliam Hubbs
The documentation makes a recommendation for the setting but does not state the purpose of the variable. X-Gentoo-Bug: 357869 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357869
2011-03-21do not delete addresses when stopping a ppp interface.Ed Wildgoose
This is important in situations where ppp is being used in a demand dialing setup. X-Gentoo-Bug: 359069 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=359069
2011-03-21update documentation for rc_sysWilliam Hubbs
Originally the plan was to deprecate this code, but this will not be happening. There are some subsystems which can still be autodetected, so we are keeping this code and allowing users to override the automatic detection with this variable as well as set it to other subtypes we cannot autodetect. X-Gentoo-Bug: 357247 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
2011-03-18net: bonding: avoid using bash string replaceMike Frysinger
X-Gentoo-Bug: 359311 X-Gentoo-Bug-URL: http://bugs.gentoo.org/359311 Reported-by: Raffaello D. Di Napoli <fastijum@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-14rc_sys: let default behavior be automagicMike Frysinger
The default rc_sys behavior was changed to always require manual intervention by users. This pretty much breaks all of the diff system variants out there if people don't explicitly edit their rc.conf file ahead of time. We should have things work "out of the box" as much as possible and reasonable. X-Gentoo-Bug: 357247 X-Gentoo-Bug-URL: http://bugs.gentoo.org/357247 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-06savecache should not fail if we are shutting downWilliam Hubbs
Since mount-ro needs to run unconditionally, we need to have savecache report that it ran successfully when the system is shutting down. X-Gentoo-Bug: 356393 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=356393
2011-03-05remove references to the migration guideWilliam Hubbs
The openrc code base is not gentoo specific, so I feel that we should not refer to the migration guide in the comments inside the configuration files.
2011-03-05allow default rc_sys value to be set at build timeWilliam Hubbs
This allows the default value of rc_sys to be set when openrc is compiled. This will allow openrc to be installed, e.g. on vserver guests and will allow them to be rebooted without the need to edit rc.conf. This patch is a combined effort between myself and Robin Johnson. X-Gentoo-Bug: 357247 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
2011-03-03fix typoWilliam Hubbs
2011-02-22net/ethtool: official interface for changing ethtool params (bug #195479)Robin H. Johnson
Implement a consistent interface for changing ethtool parameters, as suggested in bug 195479. All variable names are based on the long option to ethtool to set each group of parameters. Multiple entries seperated by newlines are permitted for variable values. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> X-Gentoo-Bug: 195479
2011-02-22Update README.net to note that it represents newnet only.Robin H. Johnson
2011-02-21net/iproute2: Pass required explicit -6 for IPv6 tunnels (#347657)Robin H. Johnson
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for the ip tunnel call. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> X-Gentoo-Bug: 347657
2011-02-21net/vlan: update to use modern iproute2 interfaceRobin H. Johnson
This replaces the vlan setup code that previously used the old vconfig binary with a new implementation using the iproute2 interface. vconfig does not handle many of the newer setups. No automatic migration path is provided, as altering the configuration is non-trivial. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Written-by: Guillaume Castagnino <casta@xwing.info> X-Gentoo-Bug: 346365
2011-02-16new implementation of applet optionWilliam Hubbs
This reworks the implementation of the --applet option so that it is processed in run_applets() and does not require two calls to the getopts_long() function. It is based on code by Robin Johnson and Chris Richards. X-Gentoo-Bug: 351712 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=351712
2011-02-14make version option commonWilliam Hubbs
This reworks the code for the version option so that it is part of the parser loop and is a common option to all applets.
2011-02-14Set unicode mode immediately at boot without consolefontSebastian Thorarensen
X-Gentoo-Bug: 354793 X-Gentoo-Bug-URL: http://bugs.gentoo.org/354793 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2011-02-14local: quote script names to handle spacesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14tests: filter valid parisc relocsMike Frysinger
Parisc generates a few relocs against internal symbols which are OK. X-Gentoo-Bug: 258913 X-Gentoo-Bug-URL: http://bugs.gentoo.org/258913 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14hwclock: fix typo from an earlier style commitMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14Fix bug #354805Anthony G. Basile
2011-02-12fix typo in iproute2 moduleChristian Wetzig
X-Gentoo-Bug: 354511 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=354511
2011-02-09set timezone if RC_HCTOSYS is not setWilliam Hubbs
We need to set the timezone for the system clock even when we allow the kernel to set the time. X-Gentoo-Bug: 248131 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
2011-02-07fix symlink targetWilliam Hubbs
The target for the symlinks in ${SBINDIR} (the same directory as the rc binary) was "rc". This is not correct; the target should be ${SBINDIR}/rc instead.
2011-02-05bridge.sh: use correct POSIX test, = not ==Christian
X-Gentoo-Bug: 353124 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=353124
2011-02-04rework pam, ncurses and termcap include filesWilliam Hubbs
This allows error checking inside the included files instead of either including the appropriate file or a blank file. Also the blank file named .mk gets removed by this change.
2011-02-04remove BSD make code to handle including .dependWilliam Hubbs
2011-02-04use make conditional for -cstd flagWilliam Hubbs
cc.mk was using ashell call to determine the value of the cstd variable. This reworks that code so it uses a make conditional.
2011-02-04remove unnecessary shell callsWilliam Hubbs
The main makefile, init.d/Makefile and src/librc/Makefile all contain several shell calls which can be handled as make conditionals. This switches them to conditionals.
2011-01-31selinux: replace symlinks with wrapper scriptsChris Richards
This needs to be done on selinux systems so the proper context can be set for each rc applet. X-Gentoo-Bug: 351712 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=351712
2011-01-31use immediate evaluation for shell callsWilliam Hubbs
This reworks the shell calls in the makefiles to use immediate evaluation and should improve parallel building. X-Gentoo-Bug: 289264 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
2011-01-31only support building with GNU MakeWilliam Hubbs
Update the documentation to state that openrc only works with gnu make. This needs to be done in order to address the parallel build issue. X-Gentoo-Bug: 289264 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
2011-01-24add option to disable setting the system clock on boot for linux systemsWilliam Hubbs
This commit adds the clock_hctosys option which is used to skip setting the system clock on boot and can be used with a modern linux kernel which has the CONFIG_RTC_HCTOSYS option set to y. I would like to thank Dimitris Mandalidis for the report and for the patch to baselayout-1 on which my changes to openrc are based. X-Gentoo-Bug: 248131 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
2011-01-20change local to run programsWilliam Hubbs
This changes the local service so that it will run programs located in @sysconfdir@/local.d instead of the local_start and local_stop functions from @sysconfdir@/conf.d/local. The advantage for the user is that these programs are not part of the openrc package, so the user does not have to worry about them being overwritten when openrc is upgraded. X-Gentoo-Bug: 351465 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=351465
2011-01-18test: You need to run "make" before "make check" will work.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 19:56:07 +0000