aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-25openrc-shutdown: mark handler as noreturn, use _unused macroSam James
2023-01-25openrc: mark handle_bad_signal as noreturnSam James
For -Wmissing-noreturn.
2023-01-25supervise-daemon: mark various functions as noreturnSam James
For -Wmissing-noreturn.
2023-01-25openrc-shutdown: mark stop_shutdown as noreturn, fix typo/indentationSam James
For -Wmissing-noreturn.
2023-01-25shared: move _noreturn definition into helpers.hSam James
2023-01-25libeinfo: fix -Wunused-but-set-variableSam James
2023-01-25librc: fix 'init' memory leakSam James
From scan-build w/ clang-16.0.0_pre20230107: ``` ../src/librc/librc.c:759:14: warning: Potential leak of memory pointed to by 'init' [unix.Malloc] return false; ^~~~~ ```
2023-01-25openrc-run: drop strlen dead storeSam James
2023-01-25openrc-shutdown: fix need_warning dead storeSam James
It's already initialised to false at the start and it's clear when reading what the flow is. While at it, fix some indentation and adjust whitespace to make more readable.
2023-01-25openrc-run: fix -Wunused-but-set-variableSam James
2023-01-25openrc: fix double-assignment to dirSam James
This one is a bit odd, it didn't get fixed in e273b4e08ee0ebc1a001d60e2a5b65a9553a8a8a, and goes all the way back to cb9da6a262b60255cd037f20b4cde3ab2c8a1e6a.
2023-01-25openrc, openrc-run: Fix -Wstrict-prototypesSam James
These become fine with C23 because () starts to mean (void) then, but for previous language versions, it's deprecated, and it causes an annoying warning when building with Clang by default. Plus, GCC lacks specific flags to trigger what C23 *does* ban, so a lot of people are going around building with -Wstrict-prototypes, so let's just fix this to be consistent with the rest of the codebase anyway to fend off false positive reports.
2023-01-24update cirrus ci to latest FreeBSD imagesWilliam Hubbs
2023-01-21add CoC based on the Contributor Covenant projectMike Frysinger
2023-01-20start-stop-daemon, supervise-daemon: use closefrom()/close_range()Matt Whitlock
On systems with a very large RLIMIT_NOFILE, calling close() in a loop from 3 to getdtablesize() effects an enormous number of system calls. There are better alternatives. Both BSD and Linux have the closefrom() system call that closes all file descriptors with indices not less than a specified minimum. Have start-stop-daemon call closefrom() on systems where it's implemented, falling back to the old loop elsewhere. Likewise, calling fcntl(i, F_SETFD, FD_CLOEXEC) in a loop from 3 to getdtablesize() raises a similar performance concern. Linux 5.11 and onward has a close_range() system call with a CLOSE_RANGE_CLOEXEC flag that sets the FD_CLOEXEC flag on all file descriptors in a specified range. Have supervise-daemon utilize this feature on systems where it's implemented, falling back to the old loop elsewhere.
2023-01-20start-stop-daemon: remove unnecessary carve-out for pipe FDMatt Whitlock
1364e6631c7f266484981d88be43f9b039f76b6a exempted the write end of the synchronization pipe from the close() loop in the child process, but this is unnecessary, as the pipe is opened with O_CLOEXEC, and the child process calls execvp() soon after the close() loop, with the intervening code not needing the pipe. Indeed, the pipe only needs to remain open in the child process until after the call to setsid(), which occurs well before the close() loop. So, eliminate the needless carve-out from the close() loop, in preparation for introducing closefrom().
2023-01-15checkpath: add missing sticky/set*id mode bits to checkMike Frysinger
We incorrectly masked out the upper 3 bits when checking to see if the permissions need updating leading us to run chmod when not needed. Fixes #482.
2023-01-15netmount: add fuse.glusterfsMike Frysinger
Fixes #495.
2023-01-15openrc-run: add status to basic usage messageMike Frysinger
Fixes #491.
2023-01-15checkpath: fix initial dirfd openingMike Frysinger
dirfd is uninitialized at this point, and even if it were, it doesn't make sense to use since the path is "/" -- the dirfd is ignored when the path is absolute. Switch to AT_FDCWD to avoid all that.
2023-01-15man: update path to internal runtime stateMike Frysinger
Fixes #498.
2023-01-15init: add missing eend to /run mount #554Mike Frysinger
Fixes #554.
2023-01-08LICENSE: Change year to 2023 (from 2015!!!)Ivan Bushchik
2023-01-05version 0.46William Hubbs
2023-01-05update newsWilliam Hubbs
2022-12-08build: fix run_command warningNikolaos Chatzikonstantinou
The default behavior of check: false is going to change to true in the future, see <https://github.com/mesonbuild/meson/issues/9300>. Thus we are explicit about the desired behavior. The error in uname is important but with test we check ourselves using returncode(). This fixes #556.
2022-12-08src/swclock: make the reference file a required argumentWilliam Hubbs
2022-12-08make the location of the swclock reference file configurableWilliam Hubbs
This fixes #565.
2022-12-07start-stop-daemon: use a pipe to sync parent/child processesMike Gilbert
This fixes #557.
2022-12-07supervise-daemon: don't overwrite empty supervise_daemon_argsJakub Jirutka
If supervise_daemon_args is not set *or empty*, it defaults to `start_stop_daemon_args`. This is bad because supervise-daemon doesn't accept the same options as `start-stop-daemon`. So if we set e.g. `start_stop_daemon_args="--wait 50"`, but not `supervise_daemon_args`, and the user adds `supervisor=supervise-daemon` to the corresponding /etc/conf.d/<service> file, the service will fail to start due to unrecognized option "wait". It would be best to remove this fallback, but that might break some existing scripts that depend on it. So this commit just changes it to use `start_stop_daemon_args` as the default for `supervise_daemon_args` only if `supervise_daemon_args` is not set at all, but not if it's empty. This at least simplifies workarounds; we can just add `supervise_daemon_args="$supervise_daemon_args"` to init scripts. This fixes #558.
2022-12-07librc-depend: fix -Wmismatched-deallocSam James
Despite this being a 'deptree', it's actually xmalloc'd in the same function (rc_deptree_update), and so should be free'd, not rc_deptree_free'd, as rc_deptree_load* wasn't used to allocate it. ``` [71/213] Compiling C object src/librc/librc.so.1.p/librc-depend.c.o ../src/librc/librc-depend.c: In function ‘rc_deptree_update’: ../src/librc/librc-depend.c:1077:9: warning: ‘rc_deptree_free’ called on pointer returned from a mismatched allocation function [-Wmismatched-dealloc] 1077 | rc_deptree_free(deptree); | ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../src/shared/misc.h:29, from ../src/librc/librc.h:57, from ../src/librc/librc-depend.c:21: In function ‘xmalloc’, inlined from ‘rc_deptree_update’ at ../src/librc/librc-depend.c:775:12: ../src/shared/helpers.h:64:23: note: returned from ‘malloc’ 64 | void *value = malloc(size); | ^~~~~~~~~~~~ ``` This fixes #563.
2022-09-07Avoid warning on grep 3.8 in hwclockStefan Linke
Starting with grep version 3.8, the hwclock init script logs warnings about stray backslashes: > hwclock | * Setting system clock using the hardware clock [UTC] ... > hwclock |grep: warning: stray \ before - > hwclock |grep: warning: stray \ before - This is caused by the check for existence of the `--noadjfile` argument in function `get_noadjfile()`. Replacing the affected logic with an explicit argument denoting the pattern as such resolves the issue. Fixes #548
2022-09-06start-stop-daemon, supervise-daemon: set autogroup nicelevelMatt Whitlock
As described in "Why nice levels are a placebo and have been for a very long time, and no one seems to have noticed"[1], the Linux kernel in its default configuration on many Linux distributions autogroups tasks by session ID and "fairly" allocates CPU time among such autogroups. The nice levels of tasks within each autogroup are only relative to other tasks within the same autogroup. Effectively, this means that the traditional nice level is rendered moot for tools like start-stop-daemon and supervise-daemon, which start each daemon in its own session and thus in its own autogroup. Linux does provide a means to change the niceness of autogroups relative to each other, so let's have start-stop- daemon and supervise-daemon make use of this feature where available so that -N,--nicelevel/SSD_NICELEVEL will actually do what the user intends. On systems where autogroups are not supported or are disabled, this commit introduces no change in behavior. Note that the setsid() call in the child process of start-stop-daemon is moved to much earlier. This is necessary so that the new process will be assigned to a new autogroup before the autogroup nicelevel is set. To avoid inadvertently acquiring /dev/tty as the controlling terminal of the new session after setsid() has given up the controlling terminal inherited from the parent process, tty_fd is opened before the call to setsid(). [1] https://www.reddit.com/r/linux/comments/d7hx2c/why_nice_levels_are_a_placebo_and_have_been_for_a/ This fixes #542.
2022-09-04init.d/root: don't remount swapSören Tempel
While refactoring the changes proposed in #533 a minor error was introduced were the root service will now attempt to remount swap. This will fail with the error message `mountinfo: 'swap' is not a mountpoint`. This fixes #546
2022-09-02Revert "start-stop-daemon: use vfork to avoid races"William Hubbs
This is broken, so revert it and reopen #532. This reverts commit 9e5ce59a21ed19a3829bae0b27d957c5fd0de74f.
2022-09-02init.d/root: also remount / with options provided in /etc/fstabSören Tempel
Without this commit, the root OpenRC service remounts all mounted filesystems (except /) with the options defined in /etc/fstab via fstabinfo. It is presently unclear to me why / was excluded from remounting in 497ff7ee41168d863971efb52e2ca6b42f765832 and unfortunately neither the commit nor the associated Bugzilla issue [1] provides further information on this. At Alpine, our initramfs does currently not remount / with all options defined in /etc/fstab [2]. As part of the discussion on the Alpine side of things we wondered why OpenRC does not remount / since this would be the easier solution for us. For this reason, this commit changes the behavior of the OpenRC root services accordingly to also remount / with the options defined in /etc/fstab. [1]: https://bugs.gentoo.org/401573 [2]: https://gitlab.alpinelinux.org/alpine/mkinitfs/-/merge_requests/103 This fixes #533.
2022-09-02start-stop-daemon: use vfork to avoid racesArusekk
While running `rc-service start docker` on Gentoo, I found that the command does not start the service 90% of the time, with an enigmatic 'service crashed' message. The root cause of this is apparently rc-service spawning a pty, running start-stop-daemon inside that pty, and exitting, before start-stop-daemon child process calls setsid(), which results in the child process being killed with SIGHUP (SI_KERNEL). Theoretically this bug was present ever since the file was created in 5af58b45146a ("Rewrite the core parts in C. We now provide...") (or even before that), but it should have been only a minor issue before 45bd125dccdc ("Use a pty for prefixed output instead of pipes for..."). Not sure why nobody has had the issue so far (it has been present for almost 15 years). As here setsid() is the last call before execve(), the most natural locking mechanism is vfork(), as it gives back control to parent process only after execve() or process termination. So this way the bug can be fixed by adding a single letter. :-) Another way to ensure this would be using an O_CLOEXEC file descriptor or some custom lock, which would need to be released not before setsid(). Fixes: 5af58b45146a ("Rewrite the core parts in C. We now provide...") Fixes #532.
2022-07-21openrc: fix help messagesxdavidwu
The two lines seem to both belong to --override, but made into seperate array elements accidentally, making options after --override and their help mismatch. This fixes it.
2022-07-03fix quoting of loggers in start-stop-daemonpsykose
previously broken in 6034866d1c74d5a23eb9f3e0ebf40c9d278aac93 caused *_logger options to be passed unquoted, so `error_logger="logger -t .."` would pass -t to s-s-d and fail to start the service. Fixes: #531
2022-06-28remove trailing spaceWilliam Hubbs
2022-06-27modules.in: always return 0, make loading more verboseWilliam Hubbs
2022-06-10restore the init symlink for sysvinit modeWilliam Hubbs
This symlink got lost in the transition to meson. X-Gentoo-Bug: 850754 X-Gentoo-Bug-URL: https://bugs.gentoo.org/850754
2022-06-08clean up hostname service scriptWilliam Hubbs
- use _ throw-away variable to get rid of a shellcheck warning - remove tests for /etc/hostname and just try to read it - drop reference to bash HOSTNAME variable. - make source of host name more accurate X-Gentoo-Bug: 850577 X-Gentoo-Bug-URL: https://bugs.gentoo.org/850577
2022-06-07version 0.45William Hubbs
2022-06-07add note about seedrng to newsWilliam Hubbs
2022-06-07update newsWilliam Hubbs
2022-06-06drop changelogWilliam Hubbs
Currently, I do not have a way to generate this since we moved to a meson-based build.
2022-05-08cirrus: drop FreeBSD 11 and 12.2, add FreeBSD 12.3William Hubbs
2022-05-08librc: fix resource leaksWilliam Hubbs
2022-05-08supervise-daemon: fix -WshadowSam James
Signed-off-by: Sam James <sam@gentoo.org>