aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-28bootmisc: do not run clean_run on VSERVER systemsWilliam Hubbs
X-Gentoo-Bug: 489370 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489370
2013-10-28loopback: do not run in a prefix or vserverWilliam Hubbs
X-Gentoo-Bug: 489370 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489370
2013-10-21librc: do not allow "." and ".." as runlevel namesWilliam Hubbs
The rc_runlevel_exists function was attempting to treat "." and ".." as valid runlevels; however, this should not be allowed. X-Gentoo-Bug: 488710 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=488710
2013-10-21Revert "Make einfo routines private"William Hubbs
This reverts commit de88aff0a839844526ae262f8961ec4372fed238. I was advised that splashutils links to libeinfo, so we do have a consumer for this library.
2013-10-18remove redundant sync callsWilliam Hubbs
The localmount and mount-ro scripts were flushing pending disk writes by calling sync twice in succession. This is no longer necessary; see the bug report and blog post for reasons we were still doing this. Reported-by: Patrick Lauer <patrick@gentoo.org> X-Gentoo-Bug: 487382 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487382
2013-10-14Add uml keyword to fsck service.Alexander V Vershilov
Fix relevant an issue mentioned by Toralf Förster. X-Gentoo-Bug: 481096. X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=481096
2013-10-12convert flock() messages to verbose warningsWilliam Hubbs
Convert these messages to warnings that are only displayed if EINFO_VERBOSE is set to yes in the environment. This is based on a suggestion from Patrick Lauer <patrick@gentoo.org>. X-Gentoo-Bug: 487588 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487588
2013-10-08netmount: add -lxc keywordWilliam Hubbs
Netmount should not run on lxc, thanks to Mark van Dijk <funtoo@internecto.net>.
2013-10-06start-stop-daemon: fix do_stop callsWilliam Hubbs
Several calls to do_stop were forcing the test parameter to be true, which was causing extra output to the terminal, such as: * Would send signal 0 to pid xxxxx This should only happen if the --test command line option was used.
2013-10-04FL-786: localmount: support filesystem mounting on openvzDaniel Robbins
2013-10-04librc: fix a read off-by-one bugNatanael Copa
We should first check if we are within bounds and then read rather than the opposite. This makes valgrind happy. Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
2013-10-04librc: fix off-by-one bugNatanael Copa
We need allocate space for both the added leading '-' and the trailing '\0'. Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
2013-09-30start-stop-daemon: fix eerorr calls in get_pidWilliam Hubbs
The eerror calls in this function make it too verbose, so change them to ewarnv() calls instead. This means that they will only print if the --verbose option is used or EINFO_VERBOSE=yes is set in the environment.
2013-09-27fix cgroup_cleanup functionWilliam Hubbs
The yesno test for rc_cgroup_cleanup belongs at the point where this function is called from runscript, not in the function itself. X-Gentoo-Bug: 486210 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=486210
2013-09-26Make einfo routines privateWilliam Hubbs
The libeinfo library has no consumers other than OpenRC, so there is no reason for it to be maintained as a library. The einfo routines are now an object that links with the rc binary.
2013-09-24start-stop-daemon: remove the verbose variableWilliam Hubbs
Along the same lines as the quiet variable, this is controlled by an environment variable for the einfo code, so we do not need a separate boolean flag.
2013-09-23start-stop-daemon: remove the quiet variableWilliam Hubbs
The suppression of output is controlled in the e* functions themselves, so there is no need for a variable to test in start-stop-daemon. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-09-23rc: add service to ignore patternsWilliam Hubbs
2013-09-23style fixesWilliam Hubbs
2013-09-20Fix stacked runlevel supportAlexander V Vershilov
Patch was provided by Max Hacking <max.gentoo.bugzilla@hacking.co.uk> and slightly fixed by Alexander Vershilov <qnikst@gentoo.org> and William Hubbs <williamh@gentoo.org>. Fixes: 1). Rebase to newest OpenRC version. 2). Remove code style fixes. Port to currect code style. 3). Fix rc_runlevel_stack instead of introducing new function. 4). Make get_runlevel_chain a private function. X-Gentoo-Bug: 467368 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=467368
2013-09-03rc: add support for suppressing error messagesWilliam Hubbs
Add support for suppressing error messages with --quiet specified twice on the command line. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-09-03libeinfo: add separate variable to suppress eerror messagesWilliam Hubbs
Add an EERROR_QUIET environment variable which works like EINFO_QUIET but for the eerror functions. This will allow library consumers to choose whether to suppress eerror messages separately from einfo and ewarn messages. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-09-01init.d: update ignore patternsWilliam Hubbs
Remove net.lo* from the ignore pattern since these scripts are no longer part of OpenRC and add loopback and tmpfiles.dev.
2013-08-28libeinfo: suppress output for eerror* functionsWilliam Hubbs
This makes the eerror* functions honor the EINFO_QUIET environment variable like the einfo* and ewarn* functions. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-08-27Revert "Libeinfo: do not suppress ewarn() messages"William Hubbs
This reverts commit 4ee62c7903c65557c493f51d6703264a816156cd. The previously referenced commit broke consistency because ewarnx() was respecting the EINFO_QUIET environment setting, but after this commit, ewarn() was not. Also, due to discussion on the below referenced bugs, I think we do want to suppress warnings when EINFO_QUIET=yes. X-Gentoo-Bug: 482396 X-Gentoo-Bug: 439174 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439174
2013-08-26start-stop-daemon: remove redundant test of the quiet valueWilliam Hubbs
The einfo() function tests for the EINFO_QUIET environment variable directly, and this is the variable that is set by the --quiet flag, so there was no reason for this test to exist.
2013-08-26start-stop-daemon: fix --quiet switchWilliam Hubbs
The --quiet switch wasn't really quiet, because we changed it to report errors. I am changing it back due to discussions on the listed bugs. X-Gentoo-Bug: 482396 X-Gentoo-Bug: 439174 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439174
2013-08-24increment versionWilliam Hubbs
2013-08-24man/runscript.8: minor grammar fixesWilliam Hubbs
2013-08-15fix typo on runscript man pageWilliam Hubbs
The example code had an invalid checkpath option (--dir instead of --directory) and a mode that does not make sense for directories (664 instead of 775). X-Gentoo-Bug: 481034 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=481034
2013-08-14typo fixWilliam Hubbs
2013-08-14add note to README about the net.* scripts moving to their own packageWilliam Hubbs
2013-08-13Remove gentoo's net.* scriptsWilliam Hubbs
It has been determined that it will be best for gentoo's net.* scripts to be in a separate package to allow independent development. This package will be called netifrc and maintained by Gentoo.
2013-08-13Clarify the documentation about the restart functionWilliam Hubbs
Restart has never been able to be overridden in OpenRc, but there is a way to make your service script behave differently when restart is being executed. X-Gentoo-Bug: 480866 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480866
2013-08-06Fix Permission Denied on reading dmesg in an LXC containerFedja Beader
2013-07-31devfs: Add -lxc keywordAlexander V Vershilov
Devfs is not needed for LXC, as LXC mounts all required fs on it's own. Reported by specing.
2013-07-27tmpfiles: do not signal an error if device nodes already existDirk Sondermann
X-Gentoo-Bug: 478336 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=478336
2013-07-26swapfiles: do not try to unmount all tmpfs mountsWilliam Hubbs
This is handled in the swap script, so it should not be done here as well. X-Gentoo-Bug: 477534 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=477534
2013-07-25Add support for DragonFly BSDGary
2013-07-25rc-cgroup: make sure the tasks file exists before adding the pidWilliam Hubbs
2013-07-25Introduce the tmpfiles.dev serviceWilliam Hubbs
This service handles setting up the tmpfiles entries for the /dev directory for Linux systems which needs to be run in the sysinit runlevel.
2013-07-25tmpfiles: add --prefix and --exclude-prefix optionsWilliam Hubbs
2013-07-23tmpfiles: make b and c commands set ownership and permissionsWilliam Hubbs
The b and c commands in tmpfiles.sh were not setting ownership and permissions for the device nodes.
2013-07-19rc-status: fix typoAlexander V Vershilov
X-Gentoo-Bug: 477318 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=477318
2013-07-16typo fixHank Leininger
X-Gentoo-Bug: 477006 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=477006
2013-07-16rc-status: fix -a to show all servicesAlexander V Vershilov
We need to unset rc_svcname so that all of the services are added to the list to display. X-Gentoo-Bug: 409787 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=409787
2013-07-05cgroups: change '$$' to 0 for consistencyWilliam Hubbs
2013-07-05Merge branch 'cgroup.systemd'William Hubbs
Conflicts: sh/rc-cgroup.sh.in
2013-07-01Put a service on into a top hierarchy of each cgroupAlexander V Vershilov
This change will fix unwanted cgroup inheriting from user cgroups, and fixes issues with systemd cgroup tracking by logind. However this fix can lead to incorrect work for some user cgroup controllers - so more advanced solution, that coveres such cases will be created later. Thanks to Fabio Erculiani (lxnay) for testing and general idea.
2013-06-25Merge branch 'gentoo'William Hubbs
This syncs the gentoo master branch to github.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 12:20:04 +0000