aboutsummaryrefslogtreecommitdiff
path: root/service-script-guide.md
diff options
context:
space:
mode:
Diffstat (limited to 'service-script-guide.md')
-rw-r--r--service-script-guide.md381
1 files changed, 381 insertions, 0 deletions
diff --git a/service-script-guide.md b/service-script-guide.md
new file mode 100644
index 00000000..5806b808
--- /dev/null
+++ b/service-script-guide.md
@@ -0,0 +1,381 @@
+This document is aimed at upstream and distribution developers who
+write OpenRC service scripts, either for their own projects, or for
+the packages they maintain. It contains advice, suggestions, tips,
+tricks, hints, and counsel; cautions, warnings, heads-ups,
+admonitions, proscriptions, enjoinders, and reprimands.
+
+It is intended to prevent common mistakes that are found "in the wild"
+by pointing out those mistakes and suggesting alternatives. Each
+good/bad thing that you should/not do has a section devoted to it. We
+don't consider anything exotic, and assume that you will use
+start-stop-daemon to manage a fairly typical long-running UNIX
+process.
+
+# Don't write your own start/stop functions
+
+OpenRC is capable of stopping and starting most daemons based on the
+information that you give it. For a well-behaved daemon that
+backgrounds itself and writes its own PID file by default, the
+following OpenRC variables are likely all that you'll need:
+
+ * command
+ * command_args
+ * pidfile
+
+Given those three pieces of information, OpenRC will be able to start
+and stop the daemon on its own. The following is taken from an
+[OpenNTPD](http://www.openntpd.org/) service script:
+
+```sh
+command="/usr/sbin/ntpd"
+
+# The special RC_SVCNAME variable contains the name of this service.
+pidfile="/run/${RC_SVCNAME}.pid"
+command_args="-p ${pidfile}"
+```
+
+If the daemon runs in the foreground by default but has options to
+background itself and to create a pidfile, then you'll also need
+
+ * command_args_background
+
+That variable should contain the flags needed to background your
+daemon, and to make it write a PID file. Take for example the
+following snippet of an
+[NRPE](https://github.com/NagiosEnterprises/nrpe) service script:
+
+```sh
+command="/usr/bin/nrpe"
+command_args="--config=/etc/nagios/nrpe.cfg"
+command_args_background="--daemon"
+pidfile="/run/${RC_SVCNAME}.pid"
+```
+
+Since NRPE runs as *root* by default, it needs no special permissions
+to write to `/run/nrpe.pid`. OpenRC takes care of starting and
+stopping the daemon with the appropriate arguments, even passing the
+`--daemon` flag during startup to force NRPE into the background (NRPE
+knows how to write its own PID file).
+
+But what if the daemon isn't so well behaved? What if it doesn't know
+how to background itself or create a pidfile? If it can do neither,
+then use,
+
+ * command_background=true
+
+which will additionally pass `--make-pidfile` to start-stop-daemon,
+causing it to create the `$pidfile` for you (rather than the daemon
+itself being responsible for creating the PID file).
+
+If your daemon doesn't know how to change its own user or group, then
+you can tell start-stop-daemon to launch it as an unprivileged user
+with
+
+ * command_user="user:group"
+
+Finally, if your daemon always forks into the background but fails to
+create a PID file, then your only option is to use
+
+ * procname
+
+With `procname`, OpenRC will try to find the running daemon by
+matching the name of its process. That's not so reliable, but daemons
+shouldn't background themselves without creating a PID file in the
+first place. The next example is part of the [CA NetConsole
+Daemon](https://oss.oracle.com/projects/cancd/) service script:
+
+```sh
+command="/usr/sbin/cancd"
+command_args="-p ${CANCD_PORT}
+ -l ${CANCD_LOG_DIR}
+ -o ${CANCD_LOG_FORMAT}"
+command_user="cancd"
+
+# cancd daemonizes itself, but doesn't write a PID file and doesn't
+# have an option to run in the foreground. So, the best we can do
+# is try to match the process name when stopping it.
+procname="cancd"
+```
+
+To recap, in order of preference:
+
+ 1. If the daemon backgrounds itself and creates its own PID file, use
+ `pidfile`.
+ 2. If the daemon does not background itself (or has an option to run
+ in the foreground) and does not create a PID file, then use
+ `command_background=true` and `pidfile`.
+ 3. If the daemon backgrounds itself and does not create a PID file,
+ use `procname` instead of `pidfile`. But, if your daemon has the
+ option to run in the foreground, then you should do that instead
+ (that would be the case in the previous item).
+ 4. The last case, where the daemon does not background itself but
+ does create a PID file, doesn't make much sense. If there's a way
+ to disable the daemon's PID file (or, to write it straight into the
+ garbage), then do that, and use `command_background=true`.
+
+# Reloading your daemon's configuration
+
+Many daemons will reload their configuration files in response to a
+signal. Suppose your daemon will reload its configuration in response
+to a `SIGHUP`. It's possible to add a new "reload" command to your
+service script that performs this action. First, tell the service
+script about the new command.
+
+```sh
+extra_started_commands="reload"
+```
+
+We use `extra_started_commands` as opposed to `extra_commands` because
+the "reload" action is only valid while the daemon is running (that
+is, started). Now, start-stop-daemon can be used to send the signal to
+the appropriate process (assuming you've defined the `pidfile`
+variable elsewhere):
+
+```sh
+reload() {
+ ebegin "Reloading ${RC_SVCNAME}"
+ start-stop-daemon --signal HUP --pidfile "${pidfile}"
+ eend $?
+}
+```
+
+# Don't restart/reload with a broken config
+
+Often, users will start a daemon, make some configuration change, and
+then attempt to restart the daemon. If the recent configuration change
+contains a mistake, the result will be that the daemon is stopped but
+then cannot be started again (due to the configuration error). It's
+possible to prevent that situation with a function that checks for
+configuration errors, and a combination of the `start_pre` and
+`stop_pre` hooks.
+
+```sh
+checkconfig() {
+ # However you want to check this...
+}
+
+start_pre() {
+ # If this isn't a restart, make sure that the user's config isn't
+ # busted before we try to start the daemon (this will produce
+ # better error messages than if we just try to start it blindly).
+ #
+ # If, on the other hand, this *is* a restart, then the stop_pre
+ # action will have ensured that the config is usable and we don't
+ # need to do that again.
+ if [ "${RC_CMD}" != "restart" ] ; then
+ checkconfig || return $?
+ fi
+}
+
+stop_pre() {
+ # If this is a restart, check to make sure the user's config
+ # isn't busted before we stop the running daemon.
+ if [ "${RC_CMD}" = "restart" ] ; then
+ checkconfig || return $?
+ fi
+}
+```
+
+To prevent a *reload* with a broken config, keep it simple:
+
+```sh
+reload() {
+ checkconfig || return $?
+ ebegin "Reloading ${RC_SVCNAME}"
+ start-stop-daemon --signal HUP --pidfile "${pidfile}"
+ eend $?
+}
+```
+
+# PID files should be writable only by root
+
+PID files must be writable only by *root*, which means additionally
+that they must live in a *root*-owned directory.
+
+Some daemons run as an unprivileged user account, and create their PID
+files (as the unprivileged user) in a path like
+`/run/foo/foo.pid`. That can usually be exploited by the unprivileged
+user to kill *root* processes, since when a service is stopped, *root*
+usually sends a SIGTERM to the contents of the PID file (which are
+controlled by the unprivileged user). The main warning sign for that
+problem is using `checkpath` to set ownership on the directory
+containing the PID file. For example,
+
+```sh
+# BAD BAD BAD BAD BAD BAD BAD BAD
+start_pre() {
+ # Ensure that the pidfile directory is writable by the foo user/group.
+ checkpath --directory --mode 0700 --owner foo:foo "/run/foo"
+}
+# BAD BAD BAD BAD BAD BAD BAD BAD
+```
+
+If the *foo* user owns `/run/foo`, then he can put whatever he wants
+in the `/run/foo/foo.pid` file. Even if *root* owns the PID file, the
+*foo* user can delete it and replace it with his own. To avoid
+security concerns, the PID file must be created as *root* and live in
+a *root*-owned directory. If your daemon is responsible for forking
+and writing its own PID file but the PID file is still owned by the
+unprivileged runtime user, then you may have an upstream issue.
+
+Once the PID file is being created as *root* (before dropping
+privileges), it can be written directly to a *root*-owned
+directory. Typically this will be `/run` on Linux, and `/var/run`
+elsewhere. For example, the *foo* daemon might write
+`/run/foo.pid`. No calls to checkpath are needed. Note: there is
+nothing technically wrong with using a directory structure like
+`/run/foo/foo.pid`, so long as *root* owns the PID file and the
+directory containing it.
+
+Ideally (see "Upstream your service scripts"), your service script
+will be integrated upstream and the build system will determine
+which of `/run` or `/var/run` is appropriate. For example,
+
+```sh
+pidfile="@piddir@/${RC_SVCNAME}.pid"
+```
+
+A decent example of this is the [Nagios core service
+script](https://github.com/NagiosEnterprises/nagioscore/blob/master/openrc-init.in),
+where the full path to the PID file is specified at build-time.
+
+# Don't let the user control the PID file location
+
+It's usually a mistake to let the end user control the PID file
+location through a conf.d variable, for a few reasons:
+
+ 1. When the PID file path is controlled by the user, you need to
+ ensure that its parent directory exists and is writable. This
+ adds unnecessary code to the service script.
+
+ 2. If the PID file path changes while the service is running, then
+ you'll find yourself unable to stop the service.
+
+ 3. The directory that should contain the PID file is best determined
+ by the upstream build system (see "Upstream your service scripts").
+ On Linux, the preferred location these days is `/run`. Other systems
+ still use `/var/run`, though, and a `./configure` script is the
+ best place to decide which one you want.
+
+ 4. Nobody cares where the PID file is located, anyway.
+
+Since OpenRC service names must be unique, a value of
+
+```sh
+pidfile="/run/${RC_SVCNAME}.pid"
+```
+
+guarantees that your PID file has a unique name.
+
+# Upstream your service scripts (for distribution developers)
+
+The ideal place for an OpenRC service script is **upstream**. Much like
+systemd services, a well-crafted OpenRC service script should be
+distribution-agnostic, and the best place for it is upstream. Why? For
+two reasons. First, having it upstream means that there's a single
+authoritative source for improvements. Second, a few paths in every
+service script are dependent upon flags passed to the build system. For
+example,
+
+```sh
+command=/usr/bin/foo
+```
+
+in an autotools-based build system should really be
+
+```sh
+command=@bindir@/foo
+```
+
+so that the user's value of `--bindir` is respected. If you keep the
+service script in your own distribution's repository, then you have to
+keep the command path and package synchronized yourself, and that's no
+fun.
+
+# Be wary of "need net" dependencies
+
+There are two things you need to know about "need net" dependencies:
+
+ 1. They are not satisfied by the loopback interface, so "need net"
+ requires some *other* interface to be up.
+
+ 2. Depending on the value of `rc_depend_strict` in `rc.conf`, the
+ "need net" will be satisfied when either *any* non-loopback
+ interface is up, or when *all* non-loopback interfaces are up.
+
+The first item means that "need net" is wrong for daemons that are
+happy with `0.0.0.0`, and the second point means that "need net" is
+wrong for daemons that need a particular (for example, the WAN)
+interface. We'll consider the two most common users of "need net";
+network clients who access some network resource, and network servers
+who provide them.
+
+## Network clients
+
+Network clients typically want the WAN interface to be up. That may
+tempt you to depend on the WAN interface; but first, you should ask
+yourself a question: does anything bad happen if the WAN interface is
+not available? In other words, if the administrator wants to disable
+the WAN, should the service be stopped? Usually the answer to that
+question is "no," and in that case, you should forego the "net"
+dependency entirely.
+
+Suppose, for example, that your service retrieves virus signature
+updates from the internet. In order to do its job correctly, it needs
+a (working) internet connection. However, the service itself does not
+require the WAN interface to be up: if it is, great; otherwise, the
+worst that will happen is that a "server unavailable" warning will be
+logged. The signature update service will not crash, and—perhaps more
+importantly—you don't want it to terminate if the administrator turns
+off the WAN interface for a second.
+
+## Network servers
+
+Network servers are generally easier to handle than their client
+counterparts. Most server daemons listen on `0.0.0.0` (all addresses)
+by default, and are therefore satisfied to have the loopback interface
+present and operational. OpenRC ships with the loopback service in the
+*boot* runlevel, and therefore most server daemons require no further
+network dependencies.
+
+The exceptions to this rule are those daemons who produce negative
+side-effects when the WAN is unavailable. For example, the Nagios
+server daemon will generate "the sky is falling" alerts for as long as
+your monitored hosts are unreachable. So in that case, you should
+require some other interface (often the WAN) to be up. A "need"
+dependency would be appropriate, because you want Nagios to be
+stopped before the network is taken down.
+
+If your daemon can optionally be configured to listen on a particular
+interface, then please see the "Depending on a particular interface"
+section.
+
+## Depending on a particular interface
+
+If you need to depend on one particular interface, usually it's not
+easy to determine programmatically what that interface is. For
+example, if your *sshd* daemon listens on `192.168.1.100` (rather than
+`0.0.0.0`), then you have two problems:
+
+ 1. Parsing `sshd_config` to figure that out; and
+
+ 2. Determining which network service name corresponds to the
+ interface for `192.168.1.100`.
+
+It's generally a bad idea to parse config files in your service
+scripts, but the second problem is the harder one. Instead, the most
+robust (i.e. the laziest) approach is to make the user specify the
+dependency when he makes a change to sshd_config. Include something
+like the following in the service configuration file,
+
+```sh
+# Specify the network service that corresponds to the "bind" setting
+# in your configuration file. For example, if you bind to 127.0.0.1,
+# this should be set to "net.lo" which provides the loopback interface.
+rc_need="net.lo"
+```
+
+This is a sensible default for daemons that are happy with `0.0.0.0`,
+but lets the user specify something else, like `rc_need="net.wan"` if
+he needs it. The burden is on the user to determine the appropriate
+service whenever he changes the daemon's configuration file.