aboutsummaryrefslogtreecommitdiff
path: root/net
diff options
context:
space:
mode:
Diffstat (limited to 'net')
-rw-r--r--net/apipa.sh2
-rw-r--r--net/arping.sh8
-rw-r--r--net/bonding.sh2
-rw-r--r--net/br2684ctl.sh6
-rw-r--r--net/bridge.sh6
-rw-r--r--net/ccwgroup.sh6
-rw-r--r--net/clip.sh2
-rw-r--r--net/ifconfig.sh.Linux.in6
-rw-r--r--net/ifplugd.sh4
-rw-r--r--net/ifwatchd.sh2
-rw-r--r--net/ip6to4.sh4
-rw-r--r--net/iproute2.sh6
-rw-r--r--net/iwconfig.sh.BSD.in6
-rw-r--r--net/iwconfig.sh.Linux.in24
-rw-r--r--net/macchanger.sh2
-rw-r--r--net/netplugd.sh4
-rw-r--r--net/pppd.sh8
-rw-r--r--net/pump.sh4
-rw-r--r--net/system.sh8
-rw-r--r--net/vlan.sh4
-rw-r--r--net/wpa_supplicant.sh4
21 files changed, 59 insertions, 59 deletions
diff --git a/net/apipa.sh b/net/apipa.sh
index f4e5f73d..0ca3bdad 100644
--- a/net/apipa.sh
+++ b/net/apipa.sh
@@ -21,7 +21,7 @@ apipa_start()
local iface="$1" i1= i2= addr= i=0
_exists true || return 1
-
+
einfo "Searching for free addresses in 169.254.0.0/16"
eindent
diff --git a/net/arping.sh b/net/arping.sh
index 307e8ef8..b04f05dc 100644
--- a/net/arping.sh
+++ b/net/arping.sh
@@ -19,7 +19,7 @@ arping_address()
esac
# We need to bring the interface up to test
- _exists "${iface}" || return 1
+ _exists "${iface}" || return 1
_up "${iface}"
eval w=\$arping_wait_${IFVAR}
@@ -43,7 +43,7 @@ arping_address()
sed -n -e 'y/abcdef/ABCDEF/' -e 's/.*\[\([^]]*\)\].*/\1/p')"
fi
[ -z "${foundmac}" ] && return 1
-
+
if [ -n "${mac}" ]; then
if [ "${mac}" != "${foundmac}" ]; then
vewarn "Found ${ip} but MAC ${foundmac} does not match"
@@ -74,7 +74,7 @@ arping_start()
fi
eindent
-
+
for x in ${gateways}; do
local IFS=,
set -- ${x}
@@ -119,7 +119,7 @@ arping_start()
fi
done
unset IFS
-
+
_load_config
return 0
fi
diff --git a/net/bonding.sh b/net/bonding.sh
index 415306c5..209d4f07 100644
--- a/net/bonding.sh
+++ b/net/bonding.sh
@@ -115,7 +115,7 @@ bonding_pre_start()
bonding_stop()
{
- _is_bond || return 0
+ _is_bond || return 0
local slaves= s=
slaves=$( \
diff --git a/net/br2684ctl.sh b/net/br2684ctl.sh
index 3eea0d9b..77dafc93 100644
--- a/net/br2684ctl.sh
+++ b/net/br2684ctl.sh
@@ -17,7 +17,7 @@ br2684ctl_depend()
}
_config_vars="$_config_vars bridge bridge_add brctl"
-
+
br2684ctl_pre_start()
{
local opts=
@@ -40,7 +40,7 @@ br2684ctl_pre_start()
return 1
;;
esac
-
+
einfo "Starting RFC 2684 Bridge control on ${IFACE}"
start-stop-daemon --start --exec $(_br2684ctl) --background \
--make-pidfile --pidfile "/var/run/br2684ctl-${IFACE}.pid" \
@@ -52,7 +52,7 @@ br2684ctl_post_stop()
{
local pidfile="/var/run/br2684ctl-${IFACE}.pid"
[ -e "${pidfile}" ] || return 0
-
+
einfo "Stopping RFC 2684 Bridge control on ${IFACE}"
start-stop-daemon --stop --quiet --pidfile "${pidfile}"
eend $?
diff --git a/net/bridge.sh b/net/bridge.sh
index c0172ed7..234a640f 100644
--- a/net/bridge.sh
+++ b/net/bridge.sh
@@ -38,13 +38,13 @@ bridge_pre_start()
local opts="$(_get_array "brctl_${IFVAR}")"
# brif is used for dynamic add
eval brif=\$bridge_add_${IFVAR}
-
+
# we need a way to if the bridge exists in a variable name, not just the
# contents of a variable. Eg if somebody has only bridge_add_eth0='br0',
# with no other lines mentioning br0.
eval bridge_unset=\${bridge_${IFVAR}-y\}
eval brctl_unset=\${brctl_${IFVAR}-y\}
-
+
if [ -z "${brif}" -a "${brctl_unset}" == 'y' ]; then
if [ -z "${ports}" -a "${bridge_unset}" == "y" ]; then
#eerror "Misconfigured static bridge detected (see net.example)"
@@ -186,6 +186,6 @@ bridge_post_stop()
brctl delbr "${iface}"
eend $?
fi
-
+
return 0
}
diff --git a/net/ccwgroup.sh b/net/ccwgroup.sh
index cf08943b..6fcba1dd 100644
--- a/net/ccwgroup.sh
+++ b/net/ccwgroup.sh
@@ -5,7 +5,7 @@ _config_vars="$_config_vars ccwgroup"
ccwgroup_depend()
{
- before interface
+ before interface
}
ccwgroup_pre_start()
@@ -42,7 +42,7 @@ ccwgroup_pre_stop()
{
# Erase any existing ccwgroup to be safe
service_set_value ccwgroup_device ""
-
+
[ ! -L /sys/class/net/"${FACE}"/driver ] && return 0
local driver="$(readlink /sys/class/net/"${IFACE}"/driver)"
case "${diver}" in
@@ -59,7 +59,7 @@ ccwgroup_post_stop()
{
local device="$(service_get_value ccwgroup_device)"
[ -z "${device}" ] && return 0
-
+
einfo "Disabling ccwgroup on ${iface}"
echo "0" >/sys/devices/qeth/"${device}"/online
echo "1" >/sys/devices/qeth/"${device}"/ungroup
diff --git a/net/clip.sh b/net/clip.sh
index 3cb84e79..35efa3f5 100644
--- a/net/clip.sh
+++ b/net/clip.sh
@@ -97,7 +97,7 @@ clip_pre_start()
return 1
fi
fi
-
+
local started_here=
if ! are_atmclip_svcs_running; then
atmclip_svcs_start || return 1
diff --git a/net/ifconfig.sh.Linux.in b/net/ifconfig.sh.Linux.in
index 74fcc9f4..f5c2064e 100644
--- a/net/ifconfig.sh.Linux.in
+++ b/net/ifconfig.sh.Linux.in
@@ -139,7 +139,7 @@ _add_address()
return 0
fi
- case "$1" in
+ case "$1" in
*:*) ifconfig "${IFACE}" inet6 add "$@"; return $?;;
esac
@@ -225,7 +225,7 @@ _delete_addresses()
while true; do
local addr=$(_get_inet_address)
[ -z "${addr}" ] && break
-
+
if [ "${addr}" = "127.0.0.1/8" ]; then
# Don't delete the loopback address
[ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ] && break
@@ -246,7 +246,7 @@ _delete_addresses()
einfo "${addr}"
ifconfig "${IFACE}" inet6 del "${addr}"
done
-
+
return 0
}
diff --git a/net/ifplugd.sh b/net/ifplugd.sh
index 58317207..9f6c8846 100644
--- a/net/ifplugd.sh
+++ b/net/ifplugd.sh
@@ -57,7 +57,7 @@ ifplugd_pre_start()
ewarn "WARNING: infinite timeout set for ${IFACE} to come up"
elif [ ${timeout} -lt 0 ]; then
einfo "Backgrounding ..."
- exit 1
+ exit 1
fi
veinfo "Waiting for ${IFACE} to be marked as started"
@@ -84,7 +84,7 @@ ifplugd_stop()
local pidfile="/var/run/ifplugd.${IFACE}.pid"
[ ! -e "${pidfile}" ] && return 0
-
+
ebegin "Stopping ifplugd on ${IFACE}"
start-stop-daemon --stop --quiet --exec /usr/sbin/ifplugd \
--pidfile "${pidfile}" --signal QUIT
diff --git a/net/ifwatchd.sh b/net/ifwatchd.sh
index d9da15eb..4e6b1c63 100644
--- a/net/ifwatchd.sh
+++ b/net/ifwatchd.sh
@@ -50,7 +50,7 @@ ifwatchd_stop()
-- -c "${RC_LIBEXECDIR}/sh/ifwatchd-carrier.sh" \
-n "${RC_LIBEXECDIR}/sh/ifwatchd-nocarrier.sh" "${IFACE}" \
|| return 0
-
+
ebegin "Stopping ifwatchd on" "${IFACE}"
start-stop-daemon --stop --exec /usr/sbin/ifwatchd \
-- -c "${RC_LIBEXECDIR}/sh/ifwatchd-carrier.sh" \
diff --git a/net/ip6to4.sh b/net/ip6to4.sh
index 6bddb7ed..23494290 100644
--- a/net/ip6to4.sh
+++ b/net/ip6to4.sh
@@ -56,7 +56,7 @@ ip6to4_start()
[ ${i} -lt 32 ] && continue
;;
esac
-
+
veinfo "IPv4 address on ${host}: ${ip}/${subnet}"
local ipa= ip6= IFS="${IFS}."
for i in ${ip}; do
@@ -87,7 +87,7 @@ ip6to4_start()
eend $? || return 1
_up
fi
-
+
# Now apply our config
eval config_${config_index}=\'"${new}"\'
config_index=$((${config_index} - 1))
diff --git a/net/iproute2.sh b/net/iproute2.sh
index 1cd4f420..4841c106 100644
--- a/net/iproute2.sh
+++ b/net/iproute2.sh
@@ -117,14 +117,14 @@ _add_address()
shift; shift; shift
set -- "${one}/$(_netmask2cidr "${three}")" "$@"
fi
-
+
# tunnel keyword is 'peer' in iproute2, but 'pointopoint' in ifconfig.
if [ "$2" = "pointopoint" ]; then
local one="$1"
shift; shift
set -- "${one}" "peer" "$@"
fi
-
+
# Always scope lo addresses as host unless specified otherwise
if [ "${IFACE}" = "lo" ]; then
set -- "$@" "scope" "host"
@@ -162,7 +162,7 @@ _add_route()
set -- "${one}" "${two}" via "$@"
fi
- local cmd= have_metric=false
+ local cmd= have_metric=false
while [ -n "$1" ]; do
case "$1" in
metric) cmd="${cmd} $1"; have_metric=true;;
diff --git a/net/iwconfig.sh.BSD.in b/net/iwconfig.sh.BSD.in
index ec88e66a..f94246b4 100644
--- a/net/iwconfig.sh.BSD.in
+++ b/net/iwconfig.sh.BSD.in
@@ -477,7 +477,7 @@ iwconfig_defaults()
#ifconfig "${iface}" txpower 100 2>/dev/null
ifconfig "${IFACE}" bssid -
ifconfig "${IFACE}" ssid -
- ifconfig "${IFACE}" wepkey 1:- wepkey 2:- wepkey 3:- wepkey 4:-
+ ifconfig "${IFACE}" wepkey 1:- wepkey 2:- wepkey 3:- wepkey 4:-
ifconfig "${IFACE}" authmode open
ifconfig "${IFACE}" -mediaopt adhoc
ifconfig "${IFACE}" -mediaopt hostap
@@ -563,8 +563,8 @@ iwconfig_pre_start()
return 0
fi
- iwconfig_defaults
- iwconfig_user_config
+ iwconfig_defaults
+ iwconfig_user_config
# Set the base metric to be 2000
metric=2000
diff --git a/net/iwconfig.sh.Linux.in b/net/iwconfig.sh.Linux.in
index 28cdd236..600ffe7f 100644
--- a/net/iwconfig.sh.Linux.in
+++ b/net/iwconfig.sh.Linux.in
@@ -47,7 +47,7 @@ _get_ssid()
_get_ap_mac_address()
{
- local mac="$(iwgetid --raw --ap "${IFACE}")"
+ local mac="$(iwgetid --raw --ap "${IFACE}")"
case "${mac}" in
"00:00:00:00:00:00") return 1;;
"44:44:44:44:44:44") return 1;;
@@ -163,7 +163,7 @@ iwconfig_setup_specific()
local key=$(iwconfig_get_wep_key)
iwconfig_set_mode "${mode}"
-
+
# Now set the key
if ! eval iwconfig "${IFACE}" key "${key}"; then
if [ "${key}" != "off" ]; then
@@ -185,10 +185,10 @@ iwconfig_setup_specific()
ewarn "${IFACE} does not support setting the channel to \"${channel:-3}\""
return 1
fi
-
+
# Finally apply the user Config
iwconfig_user_config
-
+
iwconfig_report
return 0
}
@@ -226,7 +226,7 @@ iwconfig_wait_for_association()
/proc/net/wireless)" != "0" ] && return 0
fi
fi
-
+
sleep 1
[ ${timeout} -eq 0 ] && continue
i=$((${i} + 1))
@@ -281,7 +281,7 @@ iwconfig_associate()
iwconfig "${IFACE}" freq "${freq}"
fi
[ -n "${mac}" ] && iwconfig "${IFACE}" ap "${mac}"
-
+
# Finally apply the user Config
iwconfig_user_config
@@ -377,10 +377,10 @@ iwconfig_scan()
for line; do
case "${line}" in
*Address:*)
- APS=$((${APS} + 1))
+ APS=$((${APS} + 1))
eval MAC_${APS}="\""$(echo "${line#*: }" | tr '[:lower:]' '[:upper:]')"\""
eval QUALITY_${APS}=0
- ;;
+ ;;
*ESSID:*)
x=${line#*\"}
x=${x%*\"}
@@ -455,7 +455,7 @@ iwconfig_scan()
eval a=\$QUALITY_${i}
eval b=\$QUALITY_${k}
local u=${k}
- # We need to split this into two tests, otherwise bash errors
+ # We need to split this into two tests, otherwise bash errors
[ -n "${a}" -a -n "${b}" ] && [ "${a}" -lt "${b}" ] && u=${i}
unset MAC_${u} SSID_${u} MODE_${u} CHAN_${u} QUALITY_${u} ENC_${u}
fi
@@ -581,7 +581,7 @@ iwconfig_connect_not_preferred()
break
fi
done
-
+
if ! ${pref}; then
SSID=${e}
eval mode=\$MODE_${i}
@@ -711,10 +711,10 @@ iwconfig_pre_start()
# wait if our scan returns nothing
LC_ALL=C iwconfig "${IFACE}" | sed -e '1d' | grep -q "Tx-Power=off"
local txpowerwasoff=$?
-
+
iwconfig_defaults
iwconfig_user_config
-
+
# Set the base metric to be 2000
metric=2000
diff --git a/net/macchanger.sh b/net/macchanger.sh
index 32bbdc9b..9126d302 100644
--- a/net/macchanger.sh
+++ b/net/macchanger.sh
@@ -24,7 +24,7 @@ macchanger_pre_start()
# The interface needs to be up for macchanger to work most of the time
_down
-
+
mac=$(echo "${mac}" | tr '[:upper:]' '[:lower:]')
local hex="[0-9a-f][0-9a-f]"
case "${mac}" in
diff --git a/net/netplugd.sh b/net/netplugd.sh
index 0f466436..8f36ef2d 100644
--- a/net/netplugd.sh
+++ b/net/netplugd.sh
@@ -59,7 +59,7 @@ netplugd_pre_start()
ewarn "WARNING: infinite timeout set for ${IFACE} to come up"
elif [ ${timeout} -lt 0 ]; then
einfo "Backgrounding ..."
- exit 1
+ exit 1
fi
veinfo "Waiting for ${IFACE} to be marked as started"
@@ -86,7 +86,7 @@ netplugd_stop()
local pidfile="/var/run/netplugd-${IFACE}.pid"
[ ! -e "${pidfile}" ] && return 0
-
+
ebegin "Stopping netplug on" "${IFACE}"
start-stop-daemon --stop --quiet --exec /sbin/netplugd \
--pidfile "${pidfile}"
diff --git a/net/pppd.sh b/net/pppd.sh
index a8c88820..c7cfa441 100644
--- a/net/pppd.sh
+++ b/net/pppd.sh
@@ -31,7 +31,7 @@ pppd_pre_start()
if yesno ${IN_BACKGROUND}; then
local config=
eval config=\$config_${IFVAR}
- # If no config for ppp then don't default to DHCP
+ # If no config for ppp then don't default to DHCP
if [ -z "${config}" ]; then
eval config_${IFVAR}=null
fi
@@ -39,7 +39,7 @@ pppd_pre_start()
fi
local link= i= unit="${IFACE#ppp}" opts=
-
+
# PPP requires a link to communicate over - normally a serial port
# PPPoE communicates over Ethernet
# PPPoA communicates over ATM
@@ -92,7 +92,7 @@ pppd_pre_start()
&& [ -n "${password}" -o -z "${passwordset}" ]; then
opts="plugin passwordfd.so ${opts} passwordfd 0"
fi
-
+
if ! ${hasdefaultmetric}; then
local m=
eval m=\$metric_${IFVAR}
@@ -122,7 +122,7 @@ pppd_pre_start()
# Set unit
opts="unit ${unit} ${opts}"
-
+
# Setup connect script
local chatprog="/usr/sbin/chat -e -E -v" phone=
eval phone=\$phone_number_${IFVAR}
diff --git a/net/pump.sh b/net/pump.sh
index d03e2c8d..ecceff02 100644
--- a/net/pump.sh
+++ b/net/pump.sh
@@ -35,7 +35,7 @@ pump_start()
ebegin "Running pump"
eval pump "${args}"
- eend $? || return 1
+ eend $? || return 1
_show_address
return 0
@@ -48,7 +48,7 @@ pump_stop()
start-stop-daemon --quiet --test --stop --exec /sbin/pump || return 0
# Check that pump is running on the interface
- if ! pump --status --interface "${IFACE}" >/dev/null 2>&1; then
+ if ! pump --status --interface "${IFACE}" >/dev/null 2>&1; then
return 0
fi
diff --git a/net/system.sh b/net/system.sh
index b22eee67..6680a7d1 100644
--- a/net/system.sh
+++ b/net/system.sh
@@ -80,10 +80,10 @@ _system_nis()
eval servers=\$nis_servers_${IFVAR}
[ -z "${servers}" ] && servers=${nis_servers}
-
+
eval domain=\$nis_domain_${IFVAR}
[ -z "${domain}" ] && domain=${nis_domain}
-
+
[ -z "${servers}" -a -z "${domain}" ] && return 0
buffer="# Generated by net-scripts for interface ${iface}\n"
@@ -110,8 +110,8 @@ _system_nis()
system_pre_start()
{
_system_dns
- _system_ntp
- _system_nis
+ _system_ntp
+ _system_nis
return 0
}
diff --git a/net/vlan.sh b/net/vlan.sh
index c2450515..5cd49570 100644
--- a/net/vlan.sh
+++ b/net/vlan.sh
@@ -68,7 +68,7 @@ vlan_post_start()
local vlans=
eval vlans=\$vlans_${IFVAR}
[ -z "${vlans}" ] && return 0
-
+
_check_vlan || return 1
_exists || return 1
@@ -95,7 +95,7 @@ vlan_post_start()
start
) || mark_service_stopped "net.${ifname}"
done
-
+
return 0
}
diff --git a/net/wpa_supplicant.sh b/net/wpa_supplicant.sh
index 379e6153..c619f99b 100644
--- a/net/wpa_supplicant.sh
+++ b/net/wpa_supplicant.sh
@@ -149,7 +149,7 @@ wpa_supplicant_pre_start()
if [ -z "${wpac}" ]; then
if service_started devd; then
ebegin "Backgrounding ..."
- exit 1
+ exit 1
fi
return 0
fi
@@ -167,7 +167,7 @@ wpa_supplicant_pre_start()
-P "/var/run/wpa_cli-${IFACE}.pid" -B
if eend $?; then
ebegin "Backgrounding ..."
- exit 1
+ exit 1
fi
# wpa_cli failed to start? OK, error here
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 16:00:33 +0000