diff options
Diffstat (limited to 'etc')
-rw-r--r-- | etc/Makefile | 2 | ||||
-rw-r--r-- | etc/Makefile.FreeBSD | 4 | ||||
-rw-r--r-- | etc/Makefile.Linux | 6 | ||||
-rw-r--r-- | etc/Makefile.NetBSD | 2 | ||||
-rw-r--r-- | etc/devd.conf | 315 | ||||
-rw-r--r-- | etc/rc.conf.Linux | 25 | ||||
-rw-r--r-- | etc/rc.conf.in (renamed from etc/rc.conf) | 0 | ||||
-rw-r--r-- | etc/rc.devd | 31 | ||||
-rw-r--r-- | etc/rc.in | 22 | ||||
-rw-r--r-- | etc/rc.shutdown.in | 26 |
10 files changed, 433 insertions, 0 deletions
diff --git a/etc/Makefile b/etc/Makefile index 77262595..8b43544c 100644 --- a/etc/Makefile +++ b/etc/Makefile @@ -2,4 +2,6 @@ DIR= ${SYSCONFDIR} CONF= rc.conf MK= ../mk +include ${MK}/os.mk +include Makefile.${OS} include ${MK}/scripts.mk diff --git a/etc/Makefile.FreeBSD b/etc/Makefile.FreeBSD new file mode 100644 index 00000000..4b6d75f2 --- /dev/null +++ b/etc/Makefile.FreeBSD @@ -0,0 +1,4 @@ +SED_EXTRA= -e 's:@TERM@:cons25:g' +SRCS+= rc.conf.in rc.in rc.shutdown.in +CONF+= devd.conf +BIN+= rc.devd diff --git a/etc/Makefile.Linux b/etc/Makefile.Linux new file mode 100644 index 00000000..9ac0bc25 --- /dev/null +++ b/etc/Makefile.Linux @@ -0,0 +1,6 @@ +SED_EXTRA= -e 's:@TERM@:wsvt25:g' +SRCS+= rc.in rc.shutdown.in + +rc.conf: + cp rc.conf.in rc.conf + cat rc.conf.Linux >> rc.conf diff --git a/etc/Makefile.NetBSD b/etc/Makefile.NetBSD new file mode 100644 index 00000000..5b562947 --- /dev/null +++ b/etc/Makefile.NetBSD @@ -0,0 +1,2 @@ +SED_EXTRA= -e 's:@TERM@:wsvt25:g' +SRCS+= rc.conf.in rc.in rc.shutdown.in diff --git a/etc/devd.conf b/etc/devd.conf new file mode 100644 index 00000000..3cd262cf --- /dev/null +++ b/etc/devd.conf @@ -0,0 +1,315 @@ +# $FreeBSD: src/etc/devd.conf,v 1.38 2007/06/21 22:50:36 njl Exp $ +# +# Refer to devd.conf(5) and devd(8) man pages for the details on how to +# run and configure devd. +# + +# NB: All regular expressions have an implicit ^$ around them. +# NB: device-name is shorthand for 'match device-name' + +options { + # Each directory directive adds a directory the list of directories + # that we scan for files. Files are read-in in the order that they + # are returned from readdir(3). The rule-sets are combined to + # create a DFA that's used to match events to actions. + directory "/etc/devd"; + directory "/usr/local/etc/devd"; + pid-file "/var/run/devd.pid"; + + # Setup some shorthand for regex that we use later in the file. + #XXX Yes, these are gross -- imp + set scsi-controller-regex + "(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\ + esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\ + [0-9]+"; +}; + +# Note that the attach/detach with the highest value wins, so that one can +# override these general rules. + +# +# Configure the interface on attach. Due to a historical accident, this +# script is called pccard_ether. +# +notify 0 { + match "system" "IFNET"; + match "type" "ATTACH"; + action "/etc/rc.devd net.$subsystem start"; +}; + +notify 0 { + match "system" "IFNET"; + match "type" "DETACH"; + action "/etc/rc.devd net.$subsystem stop"; +}; + +# +# Try to configure the interface when the network comes up and deconfigure +# when it goes down +# +notify 0 { + match "system" "IFNET"; + match "type" "LINK_UP"; + media-type "ethernet"; + action "/etc/rc.devd net.$subsystem start"; +}; + +notify 0 { + match "system" "IFNET"; + match "type" "LINK_DOWN"; + media-type "ethernet"; + action "/etc/rc.devd net.$subsystem stop"; +}; +# +# Like Ethernet devices, but separate because +# they have a different media type. We may want +# to exploit this later. +# +detach 0 { + media-type "802.11"; + action "/etc/rc.devd net.$device-name stop"; +}; +attach 0 { + media-type "802.11"; + action "/etc/rc.devd net.$device-name start"; +}; +notify 0 { + match "system" "IFNET"; + match "type" "LINK_UP"; + media-type "802.11"; + action "/etc/rc.devd net.$subsystem start"; +}; +notify 0 { + match "system" "IFNET"; + match "type" "LINK_DOWN"; + media-type "802.11"; + action "/etc/rc.devd net.$subsystem stop"; +}; + +# An entry like this might be in a different file, but is included here +# as an example of how to override things. Normally 'ed50' would match +# the above attach/detach stuff, but the value of 100 makes it +# hard wired to 1.2.3.4. +attach 100 { + device-name "ed50"; + action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000"; +}; +detach 100 { + device-name "ed50"; +}; + +# When a USB Bluetooth dongle appears activate it +attach 100 { + device-name "ubt[0-9]+"; + action "/etc/rc.d/bluetooth start $device-name"; +}; +detach 100 { + device-name "ubt[0-9]+"; + action "/etc/rc.d/bluetooth stop $device-name"; +}; + +# When a USB keyboard arrives, attach it as the console keyboard. +attach 100 { + device-name "ukbd0"; + action "/etc/rc.d/syscons setkeyboard /dev/ukbd0"; +}; +detach 100 { + device-name "ukbd0"; + action "/etc/rc.d/syscons setkeyboard /dev/kbd0"; +}; + +# The entry below starts moused when a mouse is plugged in. Moused +# stops automatically (actually it bombs :) when the device disappears. +attach 100 { + device-name "ums[0-9]+"; + action "/etc/rc.devd moused.$device-name start"; +}; + +# Firmware download into the ActiveWire board. After the firmware download is +# done the device detaches and reappears as something new and shiny +# automatically. +attach 100 { + match "vendor" "0x0854"; + match "product" "0x0100"; + match "release" "0x0000"; + action "/usr/local/bin/ezdownload -f /usr/local/share/usb/firmware/0854.0100.0_01.hex $device-name"; +}; + +# Firmware download for Entrega Serial DB25 adapter. +attach 100 { + match "vendor" "0x1645"; + match "product" "0x8001"; + match "release" "0x0101"; + action "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio; fi /usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 /dev/$device-name"; +}; + +# This entry starts the ColdSync tool in daemon mode. Make sure you have an up +# to date /usr/local/etc/palms. We override the 'listen' settings for port and +# type in /usr/local/etc/coldsync.conf. +attach 100 { + device-name "ugen[0-9]+"; + match "vendor" "0x082d"; + match "product" "0x0100"; + match "release" "0x0100"; + action "/usr/local/bin/coldsync -md -p /dev/$device-name -t usb"; +}; + +# +# Rescan scsi device-names on attach, but not detach. However, it is +# disabled by default due to reports of problems. +# +attach 0 { + device-name "$scsi-controller-regex"; +// action "camcontrol rescan all"; +}; + +# Don't even try to second guess what to do about drivers that don't +# match here. Instead, pass it off to syslog. Commented out for the +# moment, as the pnpinfo variable isn't set in devd yet. Individual +# variables within the bus supplied pnpinfo are set. +nomatch 0 { +# action "logger Unknown device: $pnpinfo $location $bus"; +}; + +# Various logging of unknown devices. +nomatch 10 { + match "bus" "uhub[0-9]+"; + action "logger Unknown USB device: vendor $vendor product $product \ + bus $bus"; +}; + +# Some PC-CARDs don't offer numerical manufacturer/product IDs, just +# show the CIS info there. +nomatch 20 { + match "bus" "pccard[0-9]+"; + match "manufacturer" "0xffffffff"; + match "product" "0xffffffff"; + action "logger Unknown PCCARD device: CISproduct $cisproduct \ + CIS-vendor $cisvendor bus $bus"; +}; + +nomatch 10 { + match "bus" "pccard[0-9]+"; + action "logger Unknown PCCARD device: manufacturer $manufacturer \ + product $product CISproduct $cisproduct CIS-vendor \ + $cisvendor bus $bus"; +}; + +nomatch 10 { + match "bus" "cardbus[0-9]+"; + action "logger Unknown Cardbus device: device $device class $class \ + vendor $vendor bus $bus"; +}; + +# Switch power profiles when the AC line state changes. +notify 10 { + match "system" "ACPI"; + match "subsystem" "ACAD"; + action "/etc/rc.d/power_profile $notify"; +}; + +# Notify all users before beginning emergency shutdown when we get +# a _CRT or _HOT thermal event and we're going to power down the system +# very soon. +notify 10 { + match "system" "ACPI"; + match "subsystem" "Thermal"; + match "notify" "0xcc"; + action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'"; +}; + +# Sample ZFS problem reports handling. +notify 10 { + match "system" "ZFS"; + match "type" "zpool"; + action "logger -p kern.err 'ZFS: failed to load zpool $pool'"; +}; + +notify 10 { + match "system" "ZFS"; + match "type" "vdev"; + action "logger -p kern.err 'ZFS: vdev failure, zpool=$pool type=$type'"; +}; + +notify 10 { + match "system" "ZFS"; + match "type" "data"; + action "logger -p kern.warn 'ZFS: zpool I/O failure, zpool=$pool error=$zio_err'"; +}; + +notify 10 { + match "system" "ZFS"; + match "type" "io"; + action "logger -p kern.warn 'ZFS: vdev I/O failure, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size error=$zio_err'"; +}; + +notify 10 { + match "system" "ZFS"; + match "type" "checksum"; + action "logger -p kern.warn 'ZFS: checksum mismatch, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size'"; +}; + +# User requested suspend, so perform preparation steps and then execute +# the actual suspend process. +notify 10 { + match "system" "ACPI"; + match "subsystem" "Suspend"; + action "/etc/rc.suspend acpi $notify"; +}; +notify 10 { + match "system" "ACPI"; + match "subsystem" "Resume"; + action "/etc/rc.resume acpi $notify"; +}; + +/* EXAMPLES TO END OF FILE + +# The following might be an example of something that a vendor might +# install if you were to add their device. This might reside in +# /usr/local/etc/devd/deqna.conf. A deqna is, in this hypothetical +# example, a pccard ethernet-like device. Students of history may +# know other devices by this name, and will get the in-jokes in this +# entry. +nomatch 10 { + match "bus" "pccard[0-9]+"; + match "manufacturer" "0x1234"; + match "product" "0x2323"; + action "kldload if_deqna"; +}; +attach 10 { + device-name "deqna[0-9]+"; + action "/etc/pccard_ether $device-name start"; +}; +detach 10 { + device-name "deqna[0-9]+"; + action "/etc/pccard_ether $device-name stop"; +}; + +# Examples of notify hooks. A notify is a generic way for a kernel +# subsystem to send event notification to userland. +# +# Here are some examples of ACPI notify handlers. ACPI subsystems that +# generate notifies include the AC adapter, power/sleep buttons, +# control method batteries, lid switch, and thermal zones. +# +# Information returned is not always the same as the ACPI notify +# events. See the ACPI specification for more information about +# notifies. Here is the information returned for each subsystem: +# +# ACAD: AC line state (0 is offline, 1 is online) +# Button: Button pressed (0 for power, 1 for sleep) +# CMBAT: ACPI battery events +# Lid: Lid state (0 is closed, 1 is open) +# Suspend, Resume: Suspend and resume notification +# Thermal: ACPI thermal zone events +# +# This example calls a script when the AC state changes, passing the +# notify value as the first argument. If the state is 0x00, it might +# call some sysctls to implement economy mode. If 0x01, it might set +# the mode to performance. +notify 10 { + match "system" "ACPI"; + match "subsystem" "ACAD"; + action "/etc/acpi_ac $notify"; +}; +*/ diff --git a/etc/rc.conf.Linux b/etc/rc.conf.Linux new file mode 100644 index 00000000..d1c216f3 --- /dev/null +++ b/etc/rc.conf.Linux @@ -0,0 +1,25 @@ + +############################################################################## +# LINUX SPECIFIC OPTIONS + +# This is the number of tty's used in most of the rc-scripts (like +# consolefont, numlock, etc ...) +rc_tty_number=12 + +# Use this variable to control the /dev management behavior. +# devfs - use devfs (requires sys-fs/devfsd) +# mdev - use mdev (requires sys-apps/busybox) +# udev - use udev (requires sys-fs/udev) +# static - let the user manage /dev (YOU need to create ALL device nodes) +# Leave it blank to let rc work it out (udev, mdev, devfs, static) +#rc_devices="" + +# UDEV OPTION: +# Set to "yes" if you want to save /dev to a tarball on shutdown +# and restore it on startup. This is useful if you have a lot of +# custom device nodes that udev does not handle/know about. +rc_device_tarball="NO" + +# Sets the level at which logging of messages is done to the +# console. See dmesg(8) for more info. +dmesg_level="1" diff --git a/etc/rc.conf b/etc/rc.conf.in index f0c5b770..f0c5b770 100644 --- a/etc/rc.conf +++ b/etc/rc.conf.in diff --git a/etc/rc.devd b/etc/rc.devd new file mode 100644 index 00000000..f44d9acb --- /dev/null +++ b/etc/rc.devd @@ -0,0 +1,31 @@ +#!/bin/sh +# Copyright 2007-2008 Roy Marples <roy@marples.name> +# All rights reserved. Released under the 2-clause BSD license. + +# Inform RC that we are in the background and hotplugged +export IN_BACKGROUND=yes +export IN_HOTPLUG=yes + +getmedia() { + ifconfig "$1" | while read line; do + case "${line}" in + media:" "*) echo "${line}"; return;; + esac + done +} + +# Try and create an init script for network interfaces +if [ ! -e /etc/init.d/"$1" -a ! -e /usr/local/init.d/"$1" ]; then + base=${1%%.*} + if [ "${base}" = "net" ]; then + # We only create links for pyhsical interfaces + [ -n "$(getmedia ${1#*.})" ] || exit 1 + base="net.lo0" + fi + if [ -e /etc/init.d/"${base}" -a "${base}" != "$1" ]; then + ln -s "${base}" /etc/init.d/"$1" + fi +fi + +# Run the init script +exec /etc/init.d/"$1" "$2" diff --git a/etc/rc.in b/etc/rc.in new file mode 100644 index 00000000..aab7cbb8 --- /dev/null +++ b/etc/rc.in @@ -0,0 +1,22 @@ +#!@SHELL@ +# Copyright 2007-2008 Roy Marples <roy@marples.name> +# All rights reserved. Released under the 2-clause BSD license. + +# If $TERM is not set then assume default of @TERM@ +# This gives us a nice colour boot :) +[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@" + +# Handle interrupts +trap : SIGINT +trap "echo 'Boot interrupted'; exit 1" SIGQUIT + +# BSD's init works somewhat differently to sysvinit. +# This block should 'translate' from the way init calls it to the way it would +# be called by sysvinit on linux. +RUNLEVEL="1" /sbin/rc sysinit || exit 1 +RUNLEVEL="1" /sbin/rc boot || exit 1 +PREVLEVEL="1" /sbin/rc default + +# We don't actually care if rc default worked or not, we should exit 0 +# to allow logins +exit 0 diff --git a/etc/rc.shutdown.in b/etc/rc.shutdown.in new file mode 100644 index 00000000..e26e8468 --- /dev/null +++ b/etc/rc.shutdown.in @@ -0,0 +1,26 @@ +#!@SHELL@ +# Copyright 2007-2008 Roy Marples <roy@marples.name> +# All rights reserved. Released under the 2-clause BSD license. + +# Handle interrupts +trap : SIGINT SIGQUIT + +# Try and use stuff in /lib over anywhere else so we can shutdown +# local mounts correctly. +export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" + +# If $TERM is not set then assume default of @TERM@ +# This gives us a nice colour boot :) +[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@" + +action=${1:-shutdown} + +# BSD's init works somewhat differently to sysvinit. +# This block should 'translate' from the way init calls it to the way it would +# be called by sysvinit on linux. +case "${action}" in + reboot) export RUNLEVEL=6;; + single) export RUNLEVEL=S;; + *) export RUNLEVEL=0;; +esac +exec /sbin/rc "${action}" |