diff options
Diffstat (limited to 'conf.d.BSD')
| -rw-r--r-- | conf.d.BSD/net.example | 45 |
1 files changed, 25 insertions, 20 deletions
diff --git a/conf.d.BSD/net.example b/conf.d.BSD/net.example index 134bee86..235b6058 100644 --- a/conf.d.BSD/net.example +++ b/conf.d.BSD/net.example @@ -42,27 +42,29 @@ # For a static configuration, use something like this # (They all do exactly the same thing btw) #config_eth0="192.168.0.2/24" -#config_eth0="'192.168.0.2 netmask 255.255.255.0'" +#config_eth0="192.168.0.2 netmask 255.255.255.0" # We can also specify a broadcast -#config_eth0="'192.168.0.2/24 brd 192.168.0.255'" -#config_eth0="'192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255'" +#config_eth0="192.168.0.2/24 brd 192.168.0.255" +#config_eth0="192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255" # If you need more than one address, you can use something like this # NOTE: ifconfig creates an aliased device for each extra IPv4 address # (eth0:1, eth0:2, etc) # iproute2 does not do this as there is no need to -#config_eth0="'192.168.0.2/24' '192.168.0.3/24' '192.168.0.4/24'" +#config_eth0="192.168.0.2/24 +#192.168.0.3/24 +#192.168.0.4/24'" # Or you can use sequence expressions -#config_eth0="'192.168.0.{2..4}/24'" FIXME - may not work with baselayout2 +#config_eth0="192.168.0.{2..4}/24" FIXME - may not work with baselayout2 # which does the same as above. Be careful though as if you use this and # fallbacks, you have to ensure that both end up with the same number of # values otherwise your fallback won't work correctly. # You can also use IPv6 addresses # (you should always specify a prefix length with IPv6 here) -#config_eth0="192.168.0.2/24 \ -#4321:0:1:2:3:4:567:89ab/64 \ +#config_eth0="192.168.0.2/24 +#4321:0:1:2:3:4:567:89ab/64 #4321:0:1:2:3:4:567:89ac/64" # If you wish to keep existing addresses + routing and the interface is up, @@ -70,23 +72,22 @@ # are no addresses assigned, then we move onto the next step (default dhcp) # This is useful when configuring your interface with a kernel command line # or similar -#config_eth0="noop 192.168.0.2/24" +#config_eth0="noop +#192.168.0.2/24" # If you don't want ANY address (only useful when calling for advanced stuff) #config_eth0="null" # Here's how to do routing if you need it # We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route -#routes_eth0=" \ -# 'default via 192.168.0.1' \ -# '10.0.0.0/8 via 192.168.0.1' \ -# '::/0' \ -#" +#routes_eth0="default via 192.168.0.1 +#10.0.0.0/8 via 192.168.0.1 +#::/0" # If a specified module fails (like dhcp - see below), you can specify a # fallback like so -#fallback_eth0="'192.168.0.2 netmask 255.255.255.0'" -#fallback_route_eth0="'default via 192.168.0.1'" +#fallback_eth0="192.168.0.2 netmask 255.255.255.0" +#fallback_route_eth0="default via 192.168.0.1" # NOTE: fallback entry must match the entry location in config_eth0 # As such you can only have one fallback route. @@ -211,10 +212,12 @@ # Surround each ESSID with the " character and seperate them with a space # If the first ESSID isn't found then it moves onto the next # If this isn't defined then it connects to the first one found -#preferred_aps="'ESSID 1' 'ESSID 2'" +#preferred_aps="ESSID 1 +#ESSID 2" # You can also define a preferred_aps list per interface -#preferred_aps_eth0="'ESSID 3' 'ESSID 4'" +#preferred_aps_eth0="ESSID 3 +#ESSID 4" # You can also say whether we only connect to preferred APs or not # Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly" @@ -234,8 +237,10 @@ #associate_order_eth0="any" # You can define blacklisted Access Points in the same way -#blacklist_aps="'ESSID 1' 'ESSID 2'" -#blacklist_aps_eth0="'ESSID 3' 'ESSID 4'" +#blacklist_aps="ESSID 1 +#ESSID 2" +#blacklist_aps_eth0="ESSID 3 +#ESSID 4" # If you have more than one wireless card, you can say if you want # to allow each card to associate with the same Access Point or not @@ -354,7 +359,7 @@ #dns_domain_eth0="your.domain" #dns_servers_eth0="192.168.0.2 192.168.0.3" #dns_search_eth0="this.domain that.domain" -#dns_options_eth0="'timeout:1' 'rotate'" +#dns_options_eth0="timeout:1 rotate" #dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0" # See the man page for resolv.conf for details about the options and sortlist # directives |