aboutsummaryrefslogtreecommitdiff
path: root/conf.d.BSD/net.example
diff options
context:
space:
mode:
Diffstat (limited to 'conf.d.BSD/net.example')
-rw-r--r--conf.d.BSD/net.example20
1 files changed, 4 insertions, 16 deletions
diff --git a/conf.d.BSD/net.example b/conf.d.BSD/net.example
index 9dae1035..1cd31e61 100644
--- a/conf.d.BSD/net.example
+++ b/conf.d.BSD/net.example
@@ -40,21 +40,13 @@
# INTERFACE HANDLERS
# For a static configuration, use something like this
-# (They all do exactly the same thing btw)
#config_eth0="192.168.0.2/24"
-#config_eth0="192.168.0.2 netmask 255.255.255.0"
-
-# We can also specify a broadcast
-#config_eth0="192.168.0.2/24 brd 192.168.0.255"
-#config_eth0="192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
# If you need more than one address, you can use something like this
# NOTE: ifconfig creates an aliased device for each extra IPv4 address
# (eth0:1, eth0:2, etc)
# iproute2 does not do this as there is no need to
-#config_eth0="192.168.0.2/24
-#192.168.0.3/24
-#192.168.0.4/24'"
+#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
# Or you can use sequence expressions
#config_eth0="192.168.0.{2..4}/24" FIXME - may not work with baselayout2
# which does the same as above. Be careful though as if you use this and
@@ -63,17 +55,14 @@
# You can also use IPv6 addresses
# (you should always specify a prefix length with IPv6 here)
-#config_eth0="192.168.0.2/24
-#4321:0:1:2:3:4:567:89ab/64
-#4321:0:1:2:3:4:567:89ac/64"
+#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
# If you wish to keep existing addresses + routing and the interface is up,
# you can specify a noop (no operation). If the interface is down or there
# are no addresses assigned, then we move onto the next step (default dhcp)
# This is useful when configuring your interface with a kernel command line
# or similar
-#config_eth0="noop
-#192.168.0.2/24"
+#config_eth0="noop 192.168.0.2/24"
# If you don't want ANY address (only useful when calling for advanced stuff)
#config_eth0="null"
@@ -120,8 +109,7 @@
# Most users will just need to set the following options
# key_SSID1="s:yourkeyhere enc open" # s: means a text key
# key_SSID2="aaaa-bbbb-cccc-dd" # no s: means a hex key
-# preferred_aps="SSID 1
-#SSID 2"
+# preferred_aps="SSID1 SSID2"
#
# Clear? Good. Now configure your wireless network below