diff options
| -rw-r--r-- | conf.d/.gitignore | 1 | ||||
| -rw-r--r-- | conf.d/Makefile | 7 | ||||
| -rw-r--r-- | conf.d/network | 80 |
3 files changed, 82 insertions, 6 deletions
diff --git a/conf.d/.gitignore b/conf.d/.gitignore index 377ebc05..a228e5db 100644 --- a/conf.d/.gitignore +++ b/conf.d/.gitignore @@ -1,2 +1 @@ -network staticroute diff --git a/conf.d/Makefile b/conf.d/Makefile index fb54fc57..25dff8e4 100644 --- a/conf.d/Makefile +++ b/conf.d/Makefile @@ -6,8 +6,8 @@ CONF= bootmisc fsck hostname localmount netmount urandom tmpfiles \ ifeq (${MKNET},yes) CONF+= network staticroute -TARGETS+= network staticroute -CLEANFILES+= network staticroute +TARGETS+= staticroute +CLEANFILES+= staticroute endif MK= ../mk @@ -22,8 +22,5 @@ CONF-NetBSD= moused rarpd savecore include ${MK}/scripts.mk -network: network.in network${SFX} - cat $^ > $@ - staticroute: staticroute${SFX} cp $@${SFX} $@ diff --git a/conf.d/network b/conf.d/network new file mode 100644 index 00000000..923e926c --- /dev/null +++ b/conf.d/network @@ -0,0 +1,80 @@ +# Assign static IP addresses and run custom scripts per interface. +# Seperate commands with ; +# Prefix with ! to run a shell script. +# Use \$int to represent the interface +#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0" + +# You also have ifup_eth0 and ifdown_eth0 to run other commands when +# eth0 is started and stopped. +# You should note that we don't stop the network at system shutdown by default. +# If you really need this, then set keep_network=NO + +# Lastly, the interfaces variable pulls in virtual interfaces that cannot +# be automatically detected. +#interfaces="br0 bond0 vlan0" + +# You can also use files instead of variables here if you like: +# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0 +# /etc/ip.eth0 is equivalent to ifconfig_eth0 +# /etc/ifup.eth0 is equivalent to ifup_eth0 +# /etc/ifdown.eth0 is equivalent to ifdown_eth0 +# Any files found will automatically be put into the interfaces variable. +# You don't need to escape variables in files, so use $int instead of \$int. + +# If you require DHCP, you should install dhcpcd and add it to the boot or +# default runlevel. + +# NIS users can set the domain name here +#domainname="foobar" + +# You can add a default route. +# The way this is done is slightly different depending on the operating system. +# +# *BSD: +#defaultroute="192.168.0.1" +#defaultroute6="2001:a:b:c" +#Hurd/Linux (ifconfig): +#defaultroute="gw 192.168.0.1" +#defaultroute6="gw 2001:a:b:c" + +# The remainder of this file applies to Linux only and shows how +# iproute2 is supported along with other examples. + +# ifconfig under Linux is not that powerful and doesn't easily handle +# multiple addresses +# On the other hand, iproute2 is quite powerful and is also supported +#ip_eth0="192.168.0.10/24; 192.168.10.10/24" + +# You can also use iproute2 to add the default route. +#defaultiproute="via 192.168.0.1" +#defaultiproute6="via 2001:a:b:c" + +# ip doesn't handle MTU like ifconfig, but we can do it like so +#ifup_eth0="ip link set \$int mtu 1500" + +# Create a bonded interface +#interfaces="bond0" +#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0" +#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0" +#ifdown_bond0="rmmod bonding" + +# Create tap interface and a bridge interface. +# We add the tap to the bridge. +# An external program, like dhcpcd, will configure the IP on the bridge +#interfaces="tun0 br0" +#ifup_tun0="tunctl -t \$int" +#ifdown_tun0="tunctl -d \$int" +#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2" +#ifdown_br0="ifconfig \$int down; btctl delbr \$int" + +# Create VLAN +#interfaces="eth0_2 eth0_3 eth0_4" +#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4" +#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0" +#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0" +#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0" +#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4" + +# Normally you would use wpa_supplicant to configure wireless, but you can +# use iwconfig also +#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar" |