convert all references from runscript to openrc-run

1 files changed, 0 insertions, 353 deletions

diff --git a/sh/runscript.sh.in b/sh/runscript.sh.in
deleted file mode 100644
index 4c472603..00000000
--- a/sh/runscript.sh.in
+++ /dev/null
@@ -1,353 +0,0 @@
-#!@SHELL@
-# Shell wrapper for runscript
-
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-verify_boot()
-{
-	if [ ! -e ${RC_SVCDIR}/softlevel ]; then
-		eerror "You are attempting to run an openrc service on a"
-		eerror "system which openrc did not boot."
-		eerror "You may be inside a chroot or you may have used"
-		eerror "another initialization system to boot this system."
-		eerror "In this situation, you will get unpredictable results!"
-		eerror
-		eerror "If you really want to do this, issue the following command:"
-		eerror "touch ${RC_SVCDIR}/softlevel"
-		exit 1
-	fi
-	return 0
-}
-
-sourcex()
-{
-	if [ "$1" = "-e" ]; then
-		shift
-		[ -e "$1" ] || return 1
-	fi
-	if ! . "$1"; then
-		eerror "$RC_SVCNAME: error loading $1"
-		exit 1
-	fi
-}
-
-sourcex "@LIBEXECDIR@/sh/functions.sh"
-sourcex "@LIBEXECDIR@/sh/rc-functions.sh"
-[ "$RC_SYS" != "PREFIX" ] && sourcex -e "@LIBEXECDIR@/sh/rc-cgroup.sh"
-
-# Support LiveCD foo
-if sourcex -e "/sbin/livecd-functions.sh"; then
-	livecd_read_commandline
-fi
-
-if [ -z "$1" -o -z "$2" ]; then
-	eerror "$RC_SVCNAME: not enough arguments"
-	exit 1
-fi
-
-# So daemons know where to recall us if needed
-RC_SERVICE="$1" ; export RC_SERVICE
-shift
-
-# Compat
-SVCNAME=$RC_SVCNAME ; export SVCNAME
-
-# Dependency function
-config() {
-	[ -n "$*" ] && echo "config $*"
-}
-need() {
-	[ -n "$*" ] && echo "need $*"
-}
-use() {
-	[ -n "$*" ] && echo "use $*"
-}
-before() {
-	[ -n "$*" ] && echo "before $*"
-}
-after() {
-	[ -n "$*" ] && echo "after $*"
-}
-provide() {
-	[ -n "$*" ] && echo "provide $*"
-}
-keyword() {
-	[ -n "$*" ] && echo "keyword $*"
-}
-
-# Describe the init script to the user
-describe()
-{
-	if [ -n "$description" ]; then
-		einfo "$description"
-	else
-		ewarn "No description for $RC_SVCNAME"
-	fi
-
-	local svc= desc=
-	for svc in ${extra_commands:-$opts} $extra_started_commands \
-		$extra_stopped_commands; do
-		eval desc=\$description_$svc
-		if [ -n "$desc" ]; then
-			einfo "$HILITE$svc$NORMAL: $desc"
-		else
-			ewarn "$HILITE$svc$NORMAL: no description"
-		fi
-	done
-}
-
-# Report status
-_status()
-{
-	if service_stopping; then
-		ewarn "status: stopping"
-		return 4
-	elif service_starting; then
-		ewarn "status: starting"
-		return 8
-	elif service_inactive; then
-		ewarn "status: inactive"
-		return 16
-	elif service_started; then
-		if service_crashed; then
-			eerror "status: crashed"
-			return 32
-		fi
-		einfo "status: started"
-		return 0
-	else
-		einfo "status: stopped"
-		return 3
-	fi
-}
-
-# Template start / stop / status functions
-start()
-{
-	[ -n "$command" ] || return 0
-	local _background=
-	ebegin "Starting ${name:-$RC_SVCNAME}"
-	if yesno "${command_background}"; then
-		if [ -z "${pidfile}" ]; then
-			eend 1 "command_background option used but no pidfile specified"
-			return 1
-		fi
-		_background="--background --make-pidfile"
-	fi
-	if yesno "$start_inactive"; then
-		local _inactive=false
-		service_inactive && _inactive=true
-		mark_service_inactive
-	fi
-	eval start-stop-daemon --start \
-		--exec $command \
-		${chroot:+--chroot} $chroot \
-		${procname:+--name} $procname \
-		${pidfile:+--pidfile} $pidfile \
-		$_background $start_stop_daemon_args \
-		-- $command_args
-	if eend $? "Failed to start $RC_SVCNAME"; then
-		service_set_value "command" "${command}"
-		[ -n "${chroot}" ] && service_set_value "chroot" "${chroot}"
-		[ -n "${pidfile}" ] && service_set_value "pidfile" "${pidfile}"
-		[ -n "${procname}" ] && service_set_value "procname" "${procname}"
-		return 0
-	fi
-	if yesno "$start_inactive"; then
-		if ! $_inactive; then
-			mark_service_stopped
-		fi
-	fi
-	return 1
-}
-
-stop()
-{
-	local startcommand="$(service_get_value "command")"
-	local startchroot="$(service_get_value "chroot")"
-	local startpidfile="$(service_get_value "pidfile")"
-	local startprocname="$(service_get_value "procname")"
-	command="${startcommand:-$command}"
-	chroot="${startchroot:-$chroot}"
-	pidfile="${startpidfile:-$pidfile}"
-	procname="${startprocname:-$procname}"
-	[ -n "$command" -o -n "$procname" -o -n "$pidfile" ] || return 0
-	ebegin "Stopping ${name:-$RC_SVCNAME}"
-	start-stop-daemon --stop \
-		${retry:+--retry} $retry \
-		${command:+--exec} $command \
-		${procname:+--name} $procname \
-		${pidfile:+--pidfile} $chroot$pidfile \
-		${stopsig:+--signal} $stopsig
-	eend $? "Failed to stop $RC_SVCNAME"
-}
-
-status()
-{
-	_status
-}
-
-yesno $RC_DEBUG && set -x
-
-_conf_d=${RC_SERVICE%/*}/../conf.d
-# If we're net.eth0 or openvpn.work then load net or openvpn config
-_c=${RC_SVCNAME%%.*}
-if [ -n "$_c" -a "$_c" != "$RC_SVCNAME" ]; then
-	if ! sourcex -e "$_conf_d/$_c.$RC_RUNLEVEL"; then
-		sourcex -e "$_conf_d/$_c"
-	fi
-fi
-unset _c
-
-# Overlay with our specific config
-if ! sourcex -e "$_conf_d/$RC_SVCNAME.$RC_RUNLEVEL"; then
-	sourcex -e "$_conf_d/$RC_SVCNAME"
-fi
-unset _conf_d
-
-# Load any system overrides
-sourcex -e "@SYSCONFDIR@/rc.conf"
-
-# Set verbose mode
-if yesno "${rc_verbose:-$RC_VERBOSE}"; then
-	EINFO_VERBOSE=yes
-	export EINFO_VERBOSE
-fi
-
-for _cmd; do
-	if [ "$_cmd" != status -a "$_cmd" != describe ]; then
-		# Apply any ulimit defined
-		[ -n "${rc_ulimit:-$RC_ULIMIT}" ] && \
-			ulimit ${rc_ulimit:-$RC_ULIMIT}
-		# Apply cgroups settings if defined
-		if [ "$(command -v cgroup_add_service)" = \
-		    "cgroup_add_service" ]
-		then
-			if [ -d /sys/fs/cgroup -a ! -w /sys/fs/cgroup ]; then
-				eerror "No permission to apply cgroup settings"
-				break
-			fi
-			cgroup_add_service /sys/fs/cgroup/openrc
-			cgroup_add_service /sys/fs/cgroup/systemd/system
-		fi
-		[ "$(command -v cgroup_set_limits)" = \
-		    "cgroup_set_limits" ] && \
-		    cgroup_set_limits
-		break
-	fi
-done
- 
-# Load our script
-sourcex "$RC_SERVICE"
-
-for _d in $required_dirs; do
-	if [ ! -d $_d ]; then
-		eerror "$RC_SVCNAME: \`$_d' is not a directory"
-		exit 1
-	fi
-done
-unset _d
-
-for _f in $required_files; do
-	if [ ! -r $_f ]; then
-		eerror "$RC_SVCNAME: \`$_f' is not readable"
-		exit 1
-	fi
-done
-unset _f
-
-if [ -n "$opts" ]; then
-		ewarn "Use of the opts variable is deprecated and will be"
-		ewarn "removed in the future."
-		ewarn "Please use extra_commands, extra_started_commands or extra_stopped_commands."
-fi
-
-while [ -n "$1" ]; do
-	# Special case depend
-	if [ "$1" = depend ]; then
-		shift
-
-		# Enter the dir of the init script to fix the globbing
-		# bug 412677
-		cd ${RC_SERVICE%/*}
-		_depend
-		cd /
-		continue
-	fi
-	# See if we have the required function and run it
-	for _cmd in describe start stop status ${extra_commands:-$opts} \
-		$extra_started_commands $extra_stopped_commands
-	do
-		if [ "$_cmd" = "$1" ]; then
-			if [ "$(command -v "$1")" = "$1" ]; then
-				# If we're in the background, we may wish to
-				# fake some commands. We do this so we can
-				# "start" ourselves from inactive which then
-				# triggers other services to start which
-				# depend on us.
-				# A good example of this is openvpn.
-				if yesno $IN_BACKGROUND; then
-					for _cmd in $in_background_fake; do
-						if [ "$_cmd" = "$1" ]; then
-							shift
-							continue 3
-						fi
-					done
-				fi
-				# Check to see if we need to be started before
-				# we can run this command
-				for _cmd in $extra_started_commands; do
-					if [ "$_cmd" = "$1" ]; then
-						if verify_boot && ! service_started; then
-							eerror "$RC_SVCNAME: cannot \`$1' as it has not been started"
-							exit 1
-						fi
-					fi
-				done
-				# Check to see if we need to be stopped before
-				# we can run this command
-				for _cmd in $extra_stopped_commands; do
-					if [ "$_cmd" = "$1" ]; then
-						if verify_boot && ! service_stopped; then
-							eerror "$RC_SVCNAME: cannot \`$1' as it has not been stopped"
-							exit 1
-						fi
-					fi
-				done
-				unset _cmd
-				case $1 in
-						start|stop|status) verify_boot;;
-				esac
-				if [ "$(command -v "$1_pre")" = "$1_pre" ]
-				then
-					"$1"_pre || exit $?
-				fi
-				"$1" || exit $?
-				if [ "$(command -v "$1_post")" = "$1_post" ]
-				then
-					"$1"_post || exit $?
-				fi
-				[ "$(command -v cgroup_cleanup)" = "cgroup_cleanup" -a \
-				"$1" = "stop" ] && \
-				yesno "${rc_cgroup_cleanup}" && \
-					cgroup_cleanup
-				shift
-				continue 2
-			else
-				if [ "$_cmd" = "start" -o "$_cmd" = "stop" ]
-				then
-					shift
-					continue 2
-				else
-					eerror "$RC_SVCNAME: function \`$1' defined but does not exist"
-					exit 1
-				fi
-			fi
-		fi
-	done
-	eerror "$RC_SVCNAME: unknown function \`$1'"
-	exit 1
-done
-
-exit 0