Add devd and hooks

1 files changed, 315 insertions, 0 deletions

diff --git a/etc.BSD/devd.conf b/etc.BSD/devd.conf
new file mode 100644
index 00000000..3cd262cf
--- /dev/null
+++ b/etc.BSD/devd.conf
@@ -0,0 +1,315 @@
+# $FreeBSD: src/etc/devd.conf,v 1.38 2007/06/21 22:50:36 njl Exp $
+#
+# Refer to devd.conf(5) and devd(8) man pages for the details on how to
+# run and configure devd.
+#
+
+# NB: All regular expressions have an implicit ^$ around them.
+# NB: device-name is shorthand for 'match device-name'
+
+options {
+	# Each directory directive adds a directory the list of directories
+	# that we scan for files.  Files are read-in in the order that they
+	# are returned from readdir(3).  The rule-sets are combined to
+	# create a DFA that's used to match events to actions.
+	directory "/etc/devd";
+	directory "/usr/local/etc/devd";
+	pid-file "/var/run/devd.pid";
+
+	# Setup some shorthand for regex that we use later in the file.
+	#XXX Yes, these are gross -- imp
+	set scsi-controller-regex
+		"(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\
+		esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\
+		[0-9]+";
+};
+
+# Note that the attach/detach with the highest value wins, so that one can
+# override these general rules.
+
+#
+# Configure the interface on attach.  Due to a historical accident, this
+# script is called pccard_ether.
+#
+notify 0 {
+	match "system"		"IFNET";
+	match "type"		"ATTACH";
+	action "/etc/rc.devd net.$subsystem start";
+};
+
+notify 0 {
+	match "system"		"IFNET";
+	match "type"		"DETACH";
+	action "/etc/rc.devd net.$subsystem stop";
+};
+
+#
+# Try to configure the interface when the network comes up and deconfigure
+# when it goes down
+#
+notify 0 {
+	match "system"		"IFNET";
+	match "type"		"LINK_UP";
+	media-type		"ethernet";
+	action "/etc/rc.devd net.$subsystem start";
+};
+
+notify 0 {
+	match "system"		"IFNET";
+	match "type"		"LINK_DOWN";
+	media-type		"ethernet";
+	action "/etc/rc.devd net.$subsystem stop";
+};
+#
+# Like Ethernet devices, but separate because
+# they have a different media type.  We may want
+# to exploit this later.
+#
+detach 0 {
+	media-type "802.11";
+	action "/etc/rc.devd net.$device-name stop";
+};
+attach 0 {
+	media-type "802.11";
+	action "/etc/rc.devd net.$device-name start";
+};
+notify 0 {
+	match "system"		"IFNET";
+	match "type"		"LINK_UP";
+	media-type		"802.11";
+	action "/etc/rc.devd net.$subsystem start";
+};
+notify 0 {
+	match "system"		"IFNET";
+	match "type"		"LINK_DOWN";
+	media-type		"802.11";
+	action "/etc/rc.devd net.$subsystem stop";
+};
+
+# An entry like this might be in a different file, but is included here
+# as an example of how to override things.  Normally 'ed50' would match
+# the above attach/detach stuff, but the value of 100 makes it
+# hard wired to 1.2.3.4.
+attach 100 {
+	device-name "ed50";
+	action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
+};
+detach 100 {
+	device-name "ed50";
+};
+
+# When a USB Bluetooth dongle appears activate it
+attach 100 {
+	device-name "ubt[0-9]+";
+	action "/etc/rc.d/bluetooth start $device-name";
+};
+detach 100 {
+	device-name "ubt[0-9]+";
+	action "/etc/rc.d/bluetooth stop $device-name";
+};
+
+# When a USB keyboard arrives, attach it as the console keyboard.
+attach 100 {
+	device-name "ukbd0";
+	action "/etc/rc.d/syscons setkeyboard /dev/ukbd0";
+};
+detach 100 {
+	device-name "ukbd0";
+	action "/etc/rc.d/syscons setkeyboard /dev/kbd0";
+};
+
+# The entry below starts moused when a mouse is plugged in. Moused
+# stops automatically (actually it bombs :) when the device disappears.
+attach 100 {
+	device-name "ums[0-9]+";
+	action "/etc/rc.devd moused.$device-name start";
+};
+
+# Firmware download into the ActiveWire board. After the firmware download is
+# done the device detaches and reappears as something new and shiny
+# automatically.
+attach 100 {
+	match "vendor"	"0x0854";
+	match "product"	"0x0100";
+	match "release"	"0x0000";
+	action "/usr/local/bin/ezdownload -f /usr/local/share/usb/firmware/0854.0100.0_01.hex $device-name";
+};
+
+# Firmware download for Entrega Serial DB25 adapter.
+attach 100 {
+	match "vendor"	"0x1645";
+	match "product"	"0x8001";
+	match "release"	"0x0101";
+	action "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio; fi /usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 /dev/$device-name";
+};
+
+# This entry starts the ColdSync tool in daemon mode. Make sure you have an up
+# to date /usr/local/etc/palms. We override the 'listen' settings for port and
+# type in /usr/local/etc/coldsync.conf.
+attach 100 {
+	device-name "ugen[0-9]+";
+	match "vendor" "0x082d";
+	match "product" "0x0100";
+	match "release" "0x0100";
+	action "/usr/local/bin/coldsync -md -p /dev/$device-name -t usb";
+};
+
+#
+# Rescan scsi device-names on attach, but not detach.  However, it is
+# disabled by default due to reports of problems.
+#
+attach 0 {
+	device-name "$scsi-controller-regex";
+//	action "camcontrol rescan all";
+};
+
+# Don't even try to second guess what to do about drivers that don't
+# match here.  Instead, pass it off to syslog.  Commented out for the
+# moment, as the pnpinfo variable isn't set in devd yet.  Individual
+# variables within the bus supplied pnpinfo are set.
+nomatch 0 {
+#	action "logger Unknown device: $pnpinfo $location $bus";
+};
+
+# Various logging of unknown devices.
+nomatch 10 {
+	match "bus" "uhub[0-9]+";
+	action "logger Unknown USB device: vendor $vendor product $product \
+		bus $bus";
+};
+
+# Some PC-CARDs don't offer numerical manufacturer/product IDs, just
+# show the CIS info there.
+nomatch 20 {
+	match "bus" "pccard[0-9]+";
+	match "manufacturer" "0xffffffff";
+	match "product" "0xffffffff";
+	action "logger Unknown PCCARD device: CISproduct $cisproduct \
+		CIS-vendor $cisvendor bus $bus";
+};
+
+nomatch 10 {
+	match "bus" "pccard[0-9]+";
+	action "logger Unknown PCCARD device: manufacturer $manufacturer \
+		product $product CISproduct $cisproduct CIS-vendor \
+		$cisvendor bus $bus";
+};
+
+nomatch 10 {
+	match "bus" "cardbus[0-9]+";
+	action "logger Unknown Cardbus device: device $device class $class \
+		vendor $vendor bus $bus";
+};
+
+# Switch power profiles when the AC line state changes.
+notify 10 {
+	match "system"		"ACPI";
+	match "subsystem"	"ACAD";
+	action "/etc/rc.d/power_profile $notify";
+};
+
+# Notify all users before beginning emergency shutdown when we get
+# a _CRT or _HOT thermal event and we're going to power down the system
+# very soon.
+notify 10 {
+	match "system"		"ACPI";
+	match "subsystem"	"Thermal";
+	match "notify"		"0xcc";
+	action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
+};
+
+# Sample ZFS problem reports handling.
+notify 10 {
+	match "system"		"ZFS";
+	match "type"		"zpool";
+	action "logger -p kern.err 'ZFS: failed to load zpool $pool'";
+};
+
+notify 10 {
+	match "system"		"ZFS";
+	match "type"		"vdev";
+	action "logger -p kern.err 'ZFS: vdev failure, zpool=$pool type=$type'";
+};
+
+notify 10 {
+	match "system"		"ZFS";
+	match "type"		"data";
+	action "logger -p kern.warn 'ZFS: zpool I/O failure, zpool=$pool error=$zio_err'";
+};
+
+notify 10 {
+	match "system"		"ZFS";
+	match "type"		"io";
+	action "logger -p kern.warn 'ZFS: vdev I/O failure, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size error=$zio_err'";
+};
+
+notify 10 {
+	match "system"		"ZFS";
+	match "type"		"checksum";
+	action "logger -p kern.warn 'ZFS: checksum mismatch, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size'";
+};
+
+# User requested suspend, so perform preparation steps and then execute
+# the actual suspend process.
+notify 10 {
+	match "system"		"ACPI";
+	match "subsystem"	"Suspend";
+	action "/etc/rc.suspend acpi $notify";
+};
+notify 10 {
+	match "system"		"ACPI";
+	match "subsystem"	"Resume";
+	action "/etc/rc.resume acpi $notify";
+};
+
+/* EXAMPLES TO END OF FILE
+
+# The following might be an example of something that a vendor might
+# install if you were to add their device.  This might reside in
+# /usr/local/etc/devd/deqna.conf.  A deqna is, in this hypothetical
+# example, a pccard ethernet-like device.  Students of history may
+# know other devices by this name, and will get the in-jokes in this
+# entry.
+nomatch 10 {
+	match "bus" "pccard[0-9]+";
+	match "manufacturer" "0x1234";
+	match "product" "0x2323";
+	action "kldload if_deqna";
+};
+attach 10 {
+	device-name "deqna[0-9]+";
+	action "/etc/pccard_ether $device-name start";
+};
+detach 10 {
+	device-name "deqna[0-9]+";
+	action "/etc/pccard_ether $device-name stop";
+};
+
+# Examples of notify hooks.  A notify is a generic way for a kernel
+# subsystem to send event notification to userland.
+#
+# Here are some examples of ACPI notify handlers.  ACPI subsystems that
+# generate notifies include the AC adapter, power/sleep buttons,
+# control method batteries, lid switch, and thermal zones.
+#
+# Information returned is not always the same as the ACPI notify
+# events.  See the ACPI specification for more information about
+# notifies.  Here is the information returned for each subsystem:
+#
+# ACAD:		AC line state (0 is offline, 1 is online)
+# Button:	Button pressed (0 for power, 1 for sleep)
+# CMBAT:	ACPI battery events
+# Lid:		Lid state (0 is closed, 1 is open)
+# Suspend, Resume: Suspend and resume notification
+# Thermal:	ACPI thermal zone events
+#
+# This example calls a script when the AC state changes, passing the
+# notify value as the first argument.  If the state is 0x00, it might
+# call some sysctls to implement economy mode.  If 0x01, it might set
+# the mode to performance.
+notify 10 {
+	match "system"		"ACPI";
+	match "subsystem"	"ACAD";
+	action			"/etc/acpi_ac $notify";
+};
+*/