From cbea91cae5ab8ff97f4d534181c0b0ea7c743d38 Mon Sep 17 00:00:00 2001 From: Roy Marples Date: Thu, 20 Dec 2007 17:39:13 +0000 Subject: Remove rc-help.sh and replace with a man page for runscript 8. --- man/runscript.8 | 373 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 373 insertions(+) create mode 100644 man/runscript.8 (limited to 'man') diff --git a/man/runscript.8 b/man/runscript.8 new file mode 100644 index 00000000..31ddc59f --- /dev/null +++ b/man/runscript.8 @@ -0,0 +1,373 @@ +.\" Copyright 2007 Roy Marples +.\" All rights reserved +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.Dd Dec 20, 2007 +.Dt RUNSCRIPT 8 SMM +.Os OpenRC +.Sh NAME +.Nm runscript +.Nd a means of hooking shell commands into a service +.Sh SYNOPSIS +.Nm +.Op Fl D , -nodeps +.Op Fl d , -debug +.Op Fl s , -ifstarted +.Op Ar command ... +.Sh DESCRIPTION +.Nm +is basically an interpreter for shell scripts which provide an easy interface +to the often complex system commands and daemons. +When a service runs a command it first loads it's mulitplexed configuration +file, then it's master configuration file, then +.Pa /etc/rc.conf +and finally the script itself. At this point +.Nm +then runs the command given. +.Pp +Commands are defined as shell functions within the script. Here is a list of +some functions that all runscripts have by default: +.Bl -tag -width "RC_DEFAULTLEVEL" +.It Ar describe +Describes what the service does and each command the service defines. +.It Ar start +First we ensure that any services we depend on are started. If any needed +services fail to start then we exit with a suitable error, otherwise call the +supplied start function if it exists. +.It Ar stop +First we ensure that any services that depend on us are stopped. If any +services that need us fail to stop then we exit with a suitable error, +otherwise call the supplied stop function if it exists. +.It Ar restart +Stop and start the service, including dependencies. +.It Ar status +Show the status of the service. The return code matches the status, with the +exception of "started" returning 0 to match standard command behaviour. +.It Ar zap +Resets the service state to stopped and removes all saved data about the +service. +.El +.Pp +The following options affect how the service is run: +.Bl -tag -width "RC_DEFAULTLEVEL" +.It Fl d , -debug +Set xtrace on in the shell to assist in debugging. +.It Fl D , -nodeps +Ignore all dependency information the service supplies. +.It Fl s , -ifstarted +Only run the command if the service has been started. +.It Fl q , -quiet +Turns off all informational output the service generates. +Output from any non OpenRC comands is not affected. +.It Fl v , -verbose +Turns on any extra informational output the service generates. +.El +.Pp +The following variables affect the service script: +.Bl -tag -width "RC_DEFAULTLEVEL" +.It Ar extra_commands +Space seperated list of extra commands the service defines. +.It Ar extra_started_commands +Space seperated list of extra commands the service defines. These only work if +the service has already been started. +.It Ar description +String describing the service. +.It Ar description_$command +String describing the extra command the. +.It Ar command +Daemon to start or stop via +.Nm start-stop-daemon +if no start or stop function is defined by the service. +.It Ar command_args +List of arguments to pass to the daemon when starting. +.It Ar pidfile +Pidfile to use for the above defined command. +.It Ar name +Display name used for the above defined command. +.El +.Sh DEPENDENCIES +You should define a +.Ic depend +function for the service so that +.Nm +will start and stop it in the right order in relation to other services. +As it's a function it can be very flexable, see the example below. +Here is a list of the functions you can use in a +.Ic depend +function. You simply pass the names of the services to it. +.Bl -tag -width "RC_DEFAULTLEVEL" +.It Ic need +The service will refuse to start until needed services have started and it +will refuse to stop until any services that need it have stopped. +.It Ic use +The service will attempt to start any services we use that have been added +to the runlevel. +.It Ic after +The service will start after thse services and stop before these services. +.It Ic before +The service will start before these services and stop after these services. +.It Ic provide +We provide this virtual service. For example, named provides dns. +.It Ic config +We should recalculate our dependencies if the listed files have changed. +.It Ic keywords +Tags a service with a keyword. Currently the only keyword is notimeout +which means that services do not time out waiting for that service, which only +applies when services are enabled to start and stop in parallel. +.El +.Sh BUILTINS +.Nm +defines some builtin functions that you can use inside your service scripts: +.Bl -tag -width indent +.It Ic einfo Op Ar string +Output a green asterisk followed by the string. +.It Ic ewarn Op Ar string +Output a yellow asterisk followed by the string. +.It Ic eerror Op Ar string +Output a red asterisk followed by the string to stderr. +.It Ic ebegin Op Ar string +Same as einfo, but append 3 dots to the end. +.It Ic eend Ar retval Op Ar string +If +.Ar retval +does not equal 0 then output the string using +.Ic eerror +and !! in square brackets +at the end of the line. Otherwise output ok in square brackets at the end of +the line. The value of +.Ar retval +is returned. +.It Ic ewend Ar retval Op Ar string +Same as +.Ic eend , +but use +.Ic ewarn +instead of +.Ic eerror . +.El +.Pp +You can prefix the above commands with the letter +.Ic v , +which means they only +output when the environment variable +.Va EINFO_VERBOSE +is true. +.Bl -tag -width indent +.It Ic service_set_value Ar name Ar value +Saves the +.Ar name +.Ar value +for later retrieval. Saved values are lost when the service stops. +.It Ic service_get_value Ar name +Returns the saved value called +.Ar name . +.It Ic service_started Op Ar service +If the service is started, return 0 otherwise 1. +.It Ic service_starting Op Ar service +If the service is starting, return 0 otherwise 1. +.It Ic service_inactive Op Ar service +If the service is inactive, return 0 otherwise 1. +.It Ic service_stopping Op Ar service +If the service is stopping, return 0 otherwise 1. +.It Ic service_stopped Op Ar service +If the service is stopped, return 0 otherwise 1. +.It Ic service_coldplugged Op Ar service +If the service is coldplugged, return 0 otherwise 1. +.It Ic service_wasinactive Op Ar service +If the service was inactive, return 0 otherwise 1. +.It Xo +.Ic service_started_daemon +.Op Ar service +.Ar daemon +.Op Ar index +.Xc +If the service has started the daemon using +.Nm start-stop-daemon , +return 0 otherwise 1. +If an index is specified, it has to be the nth daemon started by the service. +.It Ic mark_service_started Op Ar service +Mark the service as started. +.It Ic mark_service_starting Op Ar service +Mark the service as starting. +.It Ic mark_service_inactive Op Ar service +Mark the service as inactive. +.It Ic mark_service_stopping Op Ar service +Mark the service as stopping. +.It Ic mark_service_stopped Op Ar service +Mark the service as stopped. +.It Ic mark_service_coldplugged Op Ar service +Mark the service as coldplugged. +.It Ic mark_service_wasinactive Op Ar service +Mark the service as inactive. +.It Xo +.Ic checkpath +.Op Fl d , -directory +.Op Fl f , -file +.Op Fl m , -mode Ar mode +.Op Fl o , owner Ar owner +.Ar path ... +.Xc +Checks to see if the path exists, is of the right type, owned by the right +people and has the correct access modes. If not, then it corrects the path. +.El +.Sh ENVIRONMENT +.Nm +sets the following environment variables for use in the service scripts: +.Bl -tag -width "RC_DEFAULTLEVEL" +.It Va SVCNAME +Name of the service. +.It Va RC_SOFTLEVEL +Current runlevel that rc is in. +.It Va RC_BOOTLEVEL +Boot runlevel chosen. Default is boot. +.It Va RC_DEFAULTLEVEL +Default runlevel chosen. Default is default. +.It Va RC_SYS +A special variable to describe the system more. +Possible values are XENU, XEN0, UML and VPS. +.It Va RC_UNAME +The result of `uname -s`. +.El +.Sh FILES +.Pp +Configuration files, relative to the location of the service. +If a file ending with .${RC_SOFTLEVEL} exists then we use that instead. +.Bl -ohang +.It Pa ../conf.d/${SVCNAME%%.*} +mulitplexed configuration file. +Example: if ${SVCNAME} is net.eth1 then look for +.Pa ../conf.d/net . +.It Pa ../conf.d/${SVCNAME} +service configuration file. +.It Pa /etc/rc.conf +host configuration file. +.El +.Pp +With the exception of +.Pa /etc/rc.conf , +the configuration files can also influence the dependencies of the service +through variables. Simply prefix the name of the dependency with rc_. +Example: +.Bd -literal -offset indent +# Whilst most services don't bind to a specific interface, our +# openvpn configuration requires a specific interface, namely bge0. +rc_need="net.bge0" +.Ed +.Sh EXAMPLES +.Pp +An example service script for foo. +.Bd -literal -offset indent +#!/sbin/runscript +command=/usr/bin/foo +command_args="${foo_args} --bar" +pidfile=/var/run/foo.pid +name="FooBar Daemon" + +description="FooBar is a daemon that eats and drinks" +extra_commands="show" +extra_started_commands="drink eat" +description_drink="Opens mouth and reflexively swallows" +description_eat="Chews food in mouth" +description_show="Shows what's in the tummy" + +_need_dbus() { + grep -q dbus /etc/foo/plugins +} + +depend() { + # We write a pidfile and to /var/cache, so we need localmount. + need localmount + # We can optionally use the network, but it's not essential. + use net + # We should be after bootmisc so that /var/run is cleaned before + # we put our pidfile there. + after bootmisc + + # Foo may use a dbus plugin. + # However, if we add the dbus plugin whilst foo is running and + # stop dbus, we don't need to stop foo as foo didn't use dbus. + config /etc/foo/plugins + local _need= + if service_started; then + _need=`service_get_value need` + else + if _need_dbus; then + _need="${_need} dbus" + fi + fi + need ${_need} +} + +start_pre() { + # Ensure that our dirs are correct + checkpath --dir --owner foo:foo --mode 0664 \\ + /var/run/foo /var/cache/foo +} + +start_post() { + # Save our need + if _need_dbus; then + service_set_value need dbus + fi +} + +stop_post() { + # Clean any spills + rm -rf /var/cache/foo/* +} + +drink() { + ebegin "Starting to drink" + ${command} --drink beer + eend $? "Failed to drink any beer :(" +} + +eat() { + local result=0 retval= ate= food= + ebegin "Starting to eat" + for food in /usr/share/food/*; do + veinfo "Eating `basename ${food}`" + ${command} --eat ${food} + retval=$? + : $((${result} += ${retval})) + [ ${retval} = 0 ] && ate="${ate} `basename ${food}`" + done + if eend ${result} "Failed to eat all the food"; then + service_set_value ate "${ate}" + fi +} + +show() { + einfo "Foo has eaten: `service_get_value ate`" +} + +.Ed +.Sh SEE ALSO +.Xr rc 8 , +.Xr rc-status 8 , +.Xr rc-update 8 , +.Xr sh 1p , +.Xr start-stop-daemon 8 , +.Xr uname 1 +.Sh AUTHORS +.An "Roy Marples" Aq roy@marples.name -- cgit v1.2.3