aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2017-10-18supervise-daemon: elevate some log messages to warningsWilliam Hubbs
Prior to this change, we were logging unexpected terminations of daemons we were supervising at the info level. This change moves the logs to warnings.
2017-10-05fix compiler warningWilliam Hubbs
2017-10-02remove service binaryWilliam Hubbs
The service binary was just a synonym for rc-service, so use rc-service instead of service. If you want a "service" binary, it should be something that can determine which service manager you are running and run the appropriate service manager commands.
2017-09-18ignore sigchld when shutting down the supervised processWilliam Hubbs
We need to do this to skip the zombie state for the child process since we are not easily able to wait() for it.
2017-09-18typo fixWilliam Hubbs
2017-09-18typo fixWilliam Hubbs
2017-09-18supervise-daemon: code cleanupWilliam Hubbs
Clean up the process for killing an active supervisor when stopping.
2017-09-18initialize the stop scheduleWilliam Hubbs
2017-09-17rc-schedules.c: pass the correct pid to rc_find_pidsWilliam Hubbs
This is for #163.
2017-09-17selinux: fix const qualifier warningJason Zaman
rc-selinux.c: In function ‘selinux_setup’: rc-selinux.c:361:9: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] curr_t = context_type_get(curr_con); ^
2017-09-17selinux: use openrc contexts path to get contextsJason Zaman
The minimum requirement for libselinux is now >=2.6 The refpolicy and the gentoo policy contain the contexts since version 2.20170204-r4
2017-09-14add quiet switch to do_stop in src-schedules.cWilliam Hubbs
This allows supervise-daemon to run this code without attempting to print some status messages used by start-stop-daemon.
2017-09-06add quiet parameter to run_stop_scheduleWilliam Hubbs
2017-09-06add retry option to supervise-daemonWilliam Hubbs
The --retry option for supervise-daemon defines how the supervisor will attempt to stop the child process it is monitoring. It is defined when the supervisor is started since stopping the supervisor just sends a signal to the active supervisor. This fixes #160.
2017-08-25make run_stop_schedule accept a pid instead of a pid fileWilliam Hubbs
2017-08-24start-stop-daemon: move --retry processing code to a shared moduleWilliam Hubbs
This was part of start-stop-daemon; however, it needs to be shared in order to be used by supervise-daemon.
2017-08-23move get_pid function to a shared fileWilliam Hubbs
2017-07-24fix ENT macro usageJason Graham
X-Gentoo-Bug: 624796 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=624796
2017-06-08kill_all: include limits.h for PATH_MAXJory A. Pratt
2017-06-08fix compile issue for muslWilliam Hubbs
2017-06-05openrc-shutdown: add --single option and clean up option processingWilliam Hubbs
2017-06-04add support for writing reboot and shutdown records to wtmpWilliam Hubbs
2017-05-30openrc-init: fix buffer overflow in init.ctlSergei Trofimovich
How to reproduce 1-byte overflow: ``` $ FEATURES=-test CFLAGS="-fsanitize=address -O0 -ggdb3" emerge -1 openrc ================================================================= ==1==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff0efd8710 at pc 0x000000402076 bp 0x7fff0efd7d50 sp 0x7fff0efd7d40 WRITE of size 1 at 0x7fff0efd8710 thread T0 #0 0x402075 (/sbin/openrc-init+0x402075) #1 0x3cf6e2070f in __libc_start_main (/lib64/libc.so.6+0x3cf6e2070f) #2 0x4013b8 (/sbin/openrc-init+0x4013b8) Address 0x7fff0efd8710 is located in stack of thread T0 at offset 2432 in frame #0 0x401cfb (/sbin/openrc-init+0x401cfb) This frame has 3 object(s): [32, 160) 'signals' [192, 344) 'sa' [384, 2432) 'buf' <== Memory access at offset 2432 overflows this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism or swapcontext (longjmp and C++ exceptions *are* supported) SUMMARY: AddressSanitizer: stack-buffer-overflow ??:0 ?? ``` The problem here is in the code handling reads from 'init.ctl': ``` int main(int argc, char **argv) { ... char buf[2048]; for (;;) { /* This will block until a command is sent down the pipe... */ fifo = fopen(RC_INIT_FIFO, "r"); count = fread(buf, 1, 2048, fifo); buf[count] = 0; ... } ``` `buf[count] = 0;` writes outside the buffer when `fread()` returns non-truncated read. This fixes #138.
2017-05-30rc-logger.c: fix crash on fclose(NULL) (#137)Sergei Trofimovich
Only close the log if we successfully opened it. Reported-by: Brian Evans <grknight@gentoo.org> Tested-by: Brian Evans <grknight@gentoo.org> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2017-05-22openrc-shutdown: add dry-run optionWilliam Hubbs
2017-05-22openrc-shutdown: move to single user mode by defaultWilliam Hubbs
To be more compatible with sysvinit, move to single user mode if no options are specified on the command line.
2017-05-22init: add ability to switch to single user modeWilliam Hubbs
2017-05-19add kill_all helperWilliam Hubbs
This is similar to the sysvinit killall5 utility. It should only be used in service scripts, so it will not be installed in the path. This closes #129.
2017-05-15rc_status: calculate time differences in time_t and display seconds in uptimeWilliam Hubbs
2017-05-12supervise-daemon: save start time and respawn count before dropping privsWilliam Hubbs
2017-05-11rc-status: show uptimes and respawn counts for supervised daemonsWilliam Hubbs
2017-05-11fix to_time_t to honor dstWilliam Hubbs
2017-05-11fix from_time_t functionWilliam Hubbs
2017-05-11Move time_t conversions to rc-misc.c so they can be sharedWilliam Hubbs
2017-05-11supervise-daemon: save start time and respawn countWilliam Hubbs
This will allow rc-status to display an uptime and restart count for supervised processes.
2017-05-11supervise-daemon: fix our status when we give up on the child processWilliam Hubbs
2017-05-10supervise-daemon:create multiple options from --respawn-limitWilliam Hubbs
This creates --respawn-delay, --respawn-max and --respawn-period. It was suggested that it would be easier to follow if the options were separated. This is for #126.
2017-05-09supervise-daemon: add a --respawn-limit optionWilliam Hubbs
Allow limiting the number of times supervise-daemon will attempt to respawn a daemon once it has died to prevent infinite respawning. Also, set a reasonable default limit (10 times in a 5 second period). This is for issue #126.
2017-04-29supervise-daemon: mark all open file descriptors FD_CLOEXECWilliam Hubbs
2017-04-29supervise-daemon:remove the controlling tty in the supervisorWilliam Hubbs
2017-04-29supervise-daemon: fix access to tty_fd and devnull_fdWilliam Hubbs
Both the child and supervisor need access to these file descriptors.
2017-04-29supervise-daemon: mark the service started when the supervisor is activeWilliam Hubbs
2017-04-17init: send term/kill signals as final step of shutdownWilliam Hubbs
2017-04-13init: fix signal handlingWilliam Hubbs
The only signals we handle are SIGINT and SIGCHLD, so block all others and unblock them in the child process before we start a rurnlevel.
2017-04-12init: add re-exec capabilityWilliam Hubbs
This will allow the re-execution of the init process after upgrading OpenRC.
2017-04-07Add attribution to openrc-init.c and openrc-shutdown.cWilliam Hubbs
2017-04-06add init processWilliam Hubbs
openrc-init.c and openrc-shutdown.c are based on code which was written by James Hammons <jlhamm@acm.org>, so I would like to publically thank him for his work.
2017-04-03start-stop-daemon: warn if calling --start with --retry or --stop with --waitAustin English
This fixes #122
2017-02-17Move deptree2dot to the support folderWilliam Hubbs
Since deptree2dot and the perl requirement are completely optional, we can move this tool to the support folder. This gives the user the option of using it if they have perl installed, and means we do not have an optional runtime dependency on perl. Documentation for this tool has also been added to the support folder. X-Gentoo-Bug: 600742 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=600742
2017-01-25start-stop-daemon: allow all standard signalsDoug Freed
Also we define the signalpair_item macro. This fixes #113. X-Gentoo-Bug: 604986 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=604986