aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-12-28net/iproute2: POSIX sh compatability: ${x/a/b} invalidRobin H. Johnson
The ${x/a/b} shell construct is NOT defined in the POSIX specification, it's a bash addition. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26net/vlan: Fix prestop when device was hard-removed alreadyRobin H. Johnson
During stop of an interface, if it has been removed already (eg hotunplug), not existing is fine. X-Gentoo-Bug: 395859 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395859 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26Fix whitespace.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26net/vlan, net/macvlan: iproute2 is required for new VLAN configurationRobin H. Johnson
Since commit 683a21b0a in Feburary 2011, iproute2 has been required for new VLAN configuration. MACVLAN is also impossible to configure without iproute2. However we did not check if iproute2 was actually in the modules for a given interface, so it could end up hanging or giving weird errors. Check for iproute2 before usage now. X-Gentoo-Bug: 389437 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389437 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26net/ip6to4: Split to use pre_start and start so that other tunnel names work.Robin H. Johnson
We need to create interfaces of custom names before we can sucessfully start them. To do this, we have to add tunnels during prestart instead of start. Split up the ip6to4 script to do this, saving the computed variables for use in start with the new service data commands. X-Gentoo-Bug: 372575 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372575 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21net/iproute2: Confirmed that broadcast and peer can be used together.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21net/iproute2: IPv6 cannot be used with broadcastRobin H. Johnson
Broadcast and IPv6 should not be used together. Do not try to set the keyword for auto-generation of the broadcast address. If the user passes a broadcast address for IPv6, throw an error. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21net/iproute2: iproute2 flag handlingRobin H. Johnson
Several of the optional flags were not being handled correctly, they were being passed as values only, without the keyword before them. Affected keywords: anycast, label, scope, valid_lft, preferred_lft Also change the handling of keywords to a common setup now, making broadcast and peer strings the same as the above keywords. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-13net: Support more variants of address family specification.Robin H. Johnson
This includes address family specifications methods to help debug bug 358235 further. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-13net/iproute2: Support routing policy for IPv6 per bug #385833Robin H. Johnson
For creation of routing policy entries for IPv6, the family must be explicitly specified to 'ip'. X-Gentoo-Bug: 385833 X-Gentoo-Bug-URL: https://bugs.gentoo.org/385833 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-12net/vlan: Fix mtu settingRobin H. Johnson
Fix minor shell typo that broke setting mtu on vlans. X-Gentoo-Bug: 392971 X-Gentoo-Bug-URL: https://bugs.gentoo.org/392971 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-13net/tuntap: fix return code when tools can't be foundWilliam Hubbs
This module should return failure if iproute2, openvpn or tunctl cannot be found. Before it was returning success; this fixes the issue.
2011-12-12Tuntap: add iproute2 supportSalah Coronya
This patch was modified by William Hubbs <williamh@gentoo.org> to document the new usage in net.example. X-Gentoo-Bug: 394281 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394281
2011-12-12net/ifconfig, net/iproute2: admin/oper state check functionsRobin H. Johnson
Provide consistent methods using iproute2/ifconfig to check operational and administrative up/down state of interfaces. This is not the same as ethtool's "Link detected" field, which is the state of the layer 2 medium. TODO: How to check operational state in BSD? Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-12net/bonding: ensure slave interfaces are down before adding.Robin H. Johnson
The old ifenslave binary forcibly set new slave interface to down before adding into the kernel, as a way of show it's version to the kernel. We need to duplicate this so that the kernel doesn't think it's an old ifenslave version using the bonding setup interface. X-Gentoo-Bug: 391881 X-Gentoo-Bug-URL: https://bugs.gentoo.org/391881 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Thanks-to: Yun Zheng Hu <hu@fox-it.com>
2011-12-09ip6to4: set correct subnet maskWilliam Hubbs
The correct setting for this is /48. Reported-by: MaratIK <marat.buharov@gmail.com> X-Gentoo-Bug: 392723 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392723
2011-12-09iproute2: set a default broadcast address if none is specifiedWilliam Hubbs
Reported-by: Spooky Ghost <spookyghost@blueyounder.co.uk> X-Gentoo-Bug: 392593 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392593
2011-11-23Fix typoWilliam Hubbs
2011-11-22pass the per-interface metric to resolvconfWilliam Hubbs
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com> x-Gentoo-Bug: 364907 x-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?364907
2011-11-19make shell math operations style more succulentMike Frysinger
Convert the style: var=$((${var} + 1)) to: : $(( var += 1 )) The latter is easier to read imo. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-29Use pattern rules instead of suffix rulesWilliam Hubbs
Rework the makefiles to use pattern rules instead of suffix rules. This is the preferred way to write implicit rules according to the gnu make manual.
2011-10-26Add macvlan supportStef Simoens
X-Gentoo-Bug: 384029 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=384029
2011-10-20further clean up OS differences in makefilesMike Frysinger
No need for if() logic. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-19Make variable references in Makefiles consistentWilliam Hubbs
Some variable references were written as $(foo), but the majority were written as ${foo}. This commit changes all of the variable references to using braces.
2011-10-18consolodate MakefilesWilliam Hubbs
The tree contained many operating system specific Makefiles which were being included in other Makefiles. This commit removes those and adds the code to the makefiles which included them using make's conditional processing. X-Gentoo-Bug: 387441 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
2011-10-07net/vlan: respect txqueuelen/mac/broadcast/mtu options during creation.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-09-21Shutdown VLAN's before the actual/parent interfaceChristian Ruppert
Make sure the VLAN interfaces as well as its rules will be removed prior to the actual/parent interface. The VLAN configs are gone in vlan_post_stop() already so we have to use vlan_pre_stop() instead. Reported-by: Bernd Bednarz <bernd.bednarz@avira.com> X-Gentoo-Bug: 380603 X-Gentoo-Bug-URL: https://bugs.gentoo.org/380603
2011-09-21Refactoring of commit bf49e59e3eb4fe12167812bc1b4531742eddc383Christian Ruppert
Make sure the RPDB rules will be removed.
2011-09-19Don't do anything if the interface doesn't existYun Zheng Hu
iproute2_post_stop() does now check if the network interface still exist. Reported-by: Yun Zheng Hu <hu@fox-it.com> X-Gentoo-Bug: 379575 X-Gentoo-Bug-URL: https://bugs.gentoo.org/379575
2011-09-18Fix the Internal Field Seperator when using ethtoolGilles Oivier
ethtool.sh didn't reset the Internal Field Seperator (IFS) properly. It now does, by storing the old IFS to OIFS, which will be used later in the for loop. It also fixes the "ethtool_ring_<if>" option. Reported-by: Alois Schmid <alois.schmid@gmx.de> X-Gentoo-Bug: 368525 X-Gentoo-Bug-URL: https://bugs.gentoo.org/368525
2011-09-17Improve missing openvpn/usermode-utilities warning messageChristian Ruppert
as OpenRC can be used on other distributions as well.
2011-09-17Parse broadcast arp responses via arping (iputils) properlyStefan Knoblich
ARP replies may/do contain two MAC addresses when using iputils's arping so we have to use the first one because it's always the "From" address - which is what we want. Thanks to Stefan Knoblich <s.knoblich@axsentis.de> for the fixed pattern. Reported-by: cl@exomail.to X-Gentoo-Bug: 379181 X-Gentoo-Bug-URL: https://bugs.gentoo.org/379181
2011-09-16Print a warning if openvpn/tunctl are missingChristian Ruppert
2011-07-18Rewrite iproute2 addr argument parsing.Robin H. Johnson
This was originally to fix the fact that our code did not handle certain orders of arguments in conversion, but it was easier to rewrite the entire argument handling to support more options at the same time. Now supports all options documented in the ip manpage, including the IPv6-specific options that must be passed after the interface argument. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Reported-by: Tony Vroon <chainsaw@gentoo.org> X-Gentoo-Bug: 366905 X-Gentoo-Bug-URL: https://bugs.gentoo.org/366905
2011-07-04eat trailing whitespaceMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-29drop useless "All rights reserved" noticeMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-28net: ccwgroup: smooth up/down processMike Frysinger
We need to bring the link up ourselves after we've properly configured the device. The common code tries to bring the link up itself, but it does so before things are configured, and so it ends up failing. When shutting down, we need to wait for the kernel to finish destroying the interface. Otherwise, when doing a restart, openrc is quick enough to tell the kernel to destroy things, but then start trying to bring it back up before the kernel has finished. X-Gentoo-Bug: 367467 X-Gentoo-Bug-URL: http://bugs.gentoo.org/367467 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-16net:bonding small style change for readabilityWilliam Hubbs
2011-05-16Do not add slaves to bond interface if they are already addedKfir Lavi
X-Gentoo-Bug: 366653 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=366653 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2011-05-16net: ccwgroup: forward port changes from baselayout-1Mike Frysinger
Quite a bit of work happened in baselayout-1 on the ccwgroup module, but seems it didn't make it into openrc. So forward port all the existing code so we can work with more than just qeth and layer2 options. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-26change udhcpc support to busybox udhcpcWilliam Hubbs
This updates the udhcpc support to use busybox's udhcpc instead of the stand alone version. I would like to thank jackieku <kjackie@gmail.com> for assisting with this update. X-Gentoo-Bug: 205286 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=205286
2011-04-19[oldnet] Bug #363959: Improve plug_timeout ifplugd/netplugd code.Robin H. Johnson
- Add support for a global plug_timeout setting to match the documentation. - Update the documentation to also show per-interface configuration. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-04-07fix typo in ethtool.shWilliam Hubbs
This was causing the ethtool interface to not work. X-Gentoo-Bug: 360481 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360481
2011-03-27remove bashism from ethtool moduleMarc Joliet
X-Gentoo-Bug: 360367 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=360367
2011-03-18net: bonding: avoid using bash string replaceMike Frysinger
X-Gentoo-Bug: 359311 X-Gentoo-Bug-URL: http://bugs.gentoo.org/359311 Reported-by: Raffaello D. Di Napoli <fastijum@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-22net/ethtool: official interface for changing ethtool params (bug #195479)Robin H. Johnson
Implement a consistent interface for changing ethtool parameters, as suggested in bug 195479. All variable names are based on the long option to ethtool to set each group of parameters. Multiple entries seperated by newlines are permitted for variable values. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> X-Gentoo-Bug: 195479
2011-02-21net/iproute2: Pass required explicit -6 for IPv6 tunnels (#347657)Robin H. Johnson
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for the ip tunnel call. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> X-Gentoo-Bug: 347657
2011-02-21net/vlan: update to use modern iproute2 interfaceRobin H. Johnson
This replaces the vlan setup code that previously used the old vconfig binary with a new implementation using the iproute2 interface. vconfig does not handle many of the newer setups. No automatic migration path is provided, as altering the configuration is non-trivial. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Written-by: Guillaume Castagnino <casta@xwing.info> X-Gentoo-Bug: 346365
2011-02-12fix typo in iproute2 moduleChristian Wetzig
X-Gentoo-Bug: 354511 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=354511
2011-02-05bridge.sh: use correct POSIX test, = not ==Christian
X-Gentoo-Bug: 353124 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=353124
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 14:39:50 +0000