aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-12-29net: remove _check_macvlan functionWilliam Hubbs
This test is incorrect, and we do not need the modprobe. If macvlan is a module, it is automatically modprobed when the first macvlan link is added. Also, the /sys directory referred to in the test does not exist if macvlan is built into the kernel. Reported-by: Marien Zwart <marienz@gentoo.org> X-Gentoo-Bug: 396427 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=396427
2011-12-29disable /run migration until we have /run in baselayoutWilliam Hubbs
2011-12-29cgroups: default the size of the tmpfs to 10 mbWilliam Hubbs
2011-12-29Don't try to write the log during sysinitChristian Ruppert
During the sysinit and shutdown runlevels the logfile destination may be read-only. Skip the error messages in this case. X-Gentoo-Bug: 390645 X-Gentoo-Bug-URL: https://bugs.gentoo.org/390645
2011-12-29Use RC_LEVEL_SHUTDOWNChristian Ruppert
2011-12-29Remove useless rc_runlevel_get() callChristian Ruppert
The current runlevel will be passed to rc_logger_open() already.
2011-12-29Don't print error when the logfile isn't writeable during shutdownChristian Ruppert
The logfile or its basedir may be read-only during shutdown because the directory may be umounted or read-only remounted already. In this case we simply skip this error. This is related to a comment in bug 390645 but the initial bug is not fixed through this commit. X-Gentoo-Bug: 390645 X-Gentoo-Bug-URL: https://bugs.gentoo.org/390645
2011-12-28net/iproute2: POSIX sh compatability: ${x/a/b} invalidRobin H. Johnson
The ${x/a/b} shell construct is NOT defined in the POSIX specification, it's a bash addition. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-28net: document up_before_preup for BSDWilliam Hubbs
2011-12-28net: clean up documentation for up_before_preupWilliam Hubbs
2011-12-27net: use yesno to test up_before_preupWilliam Hubbs
2011-12-26net/vlan: Fix prestop when device was hard-removed alreadyRobin H. Johnson
During stop of an interface, if it has been removed already (eg hotunplug), not existing is fine. X-Gentoo-Bug: 395859 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395859 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26Fix whitespace.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26net/vlan, net/macvlan: iproute2 is required for new VLAN configurationRobin H. Johnson
Since commit 683a21b0a in Feburary 2011, iproute2 has been required for new VLAN configuration. MACVLAN is also impossible to configure without iproute2. However we did not check if iproute2 was actually in the modules for a given interface, so it could end up hanging or giving weird errors. Check for iproute2 before usage now. X-Gentoo-Bug: 389437 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389437 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26net/ip6to4: Split to use pre_start and start so that other tunnel names work.Robin H. Johnson
We need to create interfaces of custom names before we can sucessfully start them. To do this, we have to add tunnels during prestart instead of start. Split up the ip6to4 script to do this, saving the computed variables for use in start with the new service data commands. X-Gentoo-Bug: 372575 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372575 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26net: Add up_before_preup variable for CAN devicesRobin H. Johnson
Historically, we have tried to up interfaces before running preup, so that the kernel setups up the device and makes things like ethtool work (some hardware cannot be correct probed until then). However this ends up breaking other hardware, so a variable has been introduced to allow the up prior to preup to be disabled: up_before_preup_IFVAR=no X-Gentoo-Bug: 389475 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389475 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21net/iproute2: Confirmed that broadcast and peer can be used together.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21net/iproute2: IPv6 cannot be used with broadcastRobin H. Johnson
Broadcast and IPv6 should not be used together. Do not try to set the keyword for auto-generation of the broadcast address. If the user passes a broadcast address for IPv6, throw an error. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21net/iproute2: iproute2 flag handlingRobin H. Johnson
Several of the optional flags were not being handled correctly, they were being passed as values only, without the keyword before them. Affected keywords: anycast, label, scope, valid_lft, preferred_lft Also change the handling of keywords to a common setup now, making broadcast and peer strings the same as the above keywords. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-20cgroups: always mount the tmpfs on /sys/fs/cgroupWilliam Hubbs
X-Gentoo-Bug:395079 X-Gentoo-Bug-URL:https://bugs.gentoo.org/show_bug.cgi?id=395079
2011-12-20add rc_cgroup option to allow disabling of cgroup default setupPiotr Karbowski
Currently, cgroups are still in development, so we are not setting them up by default. However, this default will be changed in the future. This commit message and patch were updated by William Hubbs <williamh@gentoo.org>. X-Gentoo-Bug: 395079 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395079
2011-12-19cgroups: remove references to the "openrc" cgroupWilliam Hubbs
Openrc will set up cgroups the way the kernel documentation recommends.
2011-12-18cgroups: mount cgroups suggested by the kernel documentationWilliam Hubbs
The linux kernel documentation suggests mounting a separate cgroup hierarchy for each subsystem you want to control/monitor. This changes the cgroups mounting code to do this.
2011-12-13net: Support more variants of address family specification.Robin H. Johnson
This includes address family specifications methods to help debug bug 358235 further. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-13net/iproute2: Support routing policy for IPv6 per bug #385833Robin H. Johnson
For creation of routing policy entries for IPv6, the family must be explicitly specified to 'ip'. X-Gentoo-Bug: 385833 X-Gentoo-Bug-URL: https://bugs.gentoo.org/385833 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-12net/vlan: Fix mtu settingRobin H. Johnson
Fix minor shell typo that broke setting mtu on vlans. X-Gentoo-Bug: 392971 X-Gentoo-Bug-URL: https://bugs.gentoo.org/392971 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-13net/tuntap: fix return code when tools can't be foundWilliam Hubbs
This module should return failure if iproute2, openvpn or tunctl cannot be found. Before it was returning success; this fixes the issue.
2011-12-12Tuntap: add iproute2 supportSalah Coronya
This patch was modified by William Hubbs <williamh@gentoo.org> to document the new usage in net.example. X-Gentoo-Bug: 394281 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394281
2011-12-12net/ifconfig, net/iproute2: admin/oper state check functionsRobin H. Johnson
Provide consistent methods using iproute2/ifconfig to check operational and administrative up/down state of interfaces. This is not the same as ethtool's "Link detected" field, which is the state of the layer 2 medium. TODO: How to check operational state in BSD? Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-12net/bonding: ensure slave interfaces are down before adding.Robin H. Johnson
The old ifenslave binary forcibly set new slave interface to down before adding into the kernel, as a way of show it's version to the kernel. We need to duplicate this so that the kernel doesn't think it's an old ifenslave version using the bonding setup interface. X-Gentoo-Bug: 391881 X-Gentoo-Bug-URL: https://bugs.gentoo.org/391881 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Thanks-to: Yun Zheng Hu <hu@fox-it.com>
2011-12-12Network: start interfaces after dbusWilliam Hubbs
This is needed to allow auto-connect at boot. Reported-by: David J Cozatt <ygdrasil@comcast.net> X-Gentoo-Bug: 390955 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=390955
2011-12-11fix compile errorWilliam Hubbs
A variable used in the previous commit was actually removed in another commit; that is why I didn't catch it. Reported-by: Duncan < 1i5t5.duncan@cox.net> X-Gentoo-Bug: 394369 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394369
2011-12-11Allow init scripts to be executed with a relative pathWilliam Hubbs
This was a regression that was caused by the fix for http://bugs.gentoo.org/show_bug.cgi?id=350910. I am reverting the commit that we said fixed that bug and re-opening it. Reported-By: Nathaniel <nathaniel@paust.us X-Gentoo-Bug: 392457 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392457
2011-12-09ip6to4: set correct subnet maskWilliam Hubbs
The correct setting for this is /48. Reported-by: MaratIK <marat.buharov@gmail.com> X-Gentoo-Bug: 392723 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392723
2011-12-09iproute2: set a default broadcast address if none is specifiedWilliam Hubbs
Reported-by: Spooky Ghost <spookyghost@blueyounder.co.uk> X-Gentoo-Bug: 392593 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392593
2011-12-09release openrc-0.9.7William Hubbs
2011-12-03Integrate migrate-run into bootmiscWilliam Hubbs
The migrate-run service was hanging when parallel startup was enabled because of its dependencies. This integrates the logic for this service into bootmisc, which will avoid the issues with parallel startup. I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his input on this patch
2011-11-27migrate-run: fix ln calls and migrate directories separatelyWilliam Hubbs
This is based on a patch submitted by AlphatPC@gmail.com. Reported-by: AlphatPC@gmail.com X-Gentoo-Bug: 391945 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=391945
2011-11-26Make migrate-run more verboseWilliam Hubbs
2011-11-26Remove rc_parallel from rc.confWilliam Hubbs
rc_parallel has never been considered a stable feature of openrc. To that end, I am removing the documentation for this feature from rc.conf. It is still available, but bugs against it are not considered stable blockers, and it should only be used currently by developers and users who are willing to test the feature. X-Gentoo-Bug: 391945 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=391945
2011-11-26urandom: move seed from /var/run to /var/libMike Frysinger
We want the seed to be preserved across reboots, so move it to /var/lib. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-26fsck: fix typo in fsck mount point supportMike Frysinger
Previous commit e3b39a677b535bc2 missed adding a "[" to one of the tests. Reported-by: Torsten Veller <tove@gentoo.org> x-Gentoo-Bug: 391941 x-Gentoo-Bug-URL: http://bugs.gentoo.org/391941 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-25release openrc-0.9.6William Hubbs
2011-11-23net.lo: fix typo in previous math commitMike Frysinger
x-Gentoo-Bug: 391671 x-Gentoo-Bug-URL: http://bugs.gentoo.org/391671 Reported-by: Duncan <1i5t5.duncan@cox.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-23release openrc-0.9.5William Hubbs
2011-11-23Fix typoWilliam Hubbs
2011-11-23Migrate /var/lock and /var/run to /run for linux systemsWilliam Hubbs
2011-11-22Revert "Revert "fsck: add the ability to specify mount points to check""William Hubbs
This reverts commit 5a3599df8a15b1212857335101c9d31fb19e87e2. After review, I am bringing this back to the tree.
2011-11-22pass the per-interface metric to resolvconfWilliam Hubbs
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com> x-Gentoo-Bug: 364907 x-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?364907
2011-11-20CGroups: create the openrc cgroup hierarchyWilliam Hubbs
Openrc will create a cgroup hierarchy called openrc which will have all services it starts and all subsystems attached to it. If you need other groups/hierarchies, please use libcgroup.