aboutsummaryrefslogtreecommitdiff
path: root/net.Linux
diff options
context:
space:
mode:
Diffstat (limited to 'net.Linux')
-rw-r--r--net.Linux/Makefile7
-rw-r--r--net.Linux/adsl.sh74
-rw-r--r--net.Linux/apipa.sh48
-rw-r--r--net.Linux/arping.sh131
-rw-r--r--net.Linux/bonding.sh101
-rw-r--r--net.Linux/br2684ctl.sh59
-rw-r--r--net.Linux/bridge.sh123
-rw-r--r--net.Linux/ccwgroup.sh67
-rw-r--r--net.Linux/clip.sh221
-rw-r--r--net.Linux/ifconfig.sh291
-rw-r--r--net.Linux/ifplugd.sh92
-rw-r--r--net.Linux/ip6to4.sh99
-rw-r--r--net.Linux/ipppd.sh48
-rw-r--r--net.Linux/iproute2.sh241
-rw-r--r--net.Linux/iwconfig.sh761
-rw-r--r--net.Linux/netplugd.sh94
-rw-r--r--net.Linux/pppd.sh243
-rw-r--r--net.Linux/pump.sh59
-rw-r--r--net.Linux/tuntap.sh83
-rw-r--r--net.Linux/udhcpc.sh105
-rw-r--r--net.Linux/vlan.sh118
21 files changed, 0 insertions, 3065 deletions
diff --git a/net.Linux/Makefile b/net.Linux/Makefile
deleted file mode 100644
index 628f5f40..00000000
--- a/net.Linux/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-DIR= ${PREFIX}/${RC_LIB}/net
-INC= adsl.sh apipa.sh arping.sh bonding.sh br2684ctl.sh bridge.sh ccwgroup.sh \
- clip.sh ifconfig.sh ifplugd.sh ip6to4.sh ipppd.sh iproute2.sh \
- iwconfig.sh netplugd.sh pppd.sh pump.sh tuntap.sh udhcpc.sh vlan.sh
-
-MK= ../mk
-include ${MK}/scripts.mk
diff --git a/net.Linux/adsl.sh b/net.Linux/adsl.sh
deleted file mode 100644
index 6dd93e03..00000000
--- a/net.Linux/adsl.sh
+++ /dev/null
@@ -1,74 +0,0 @@
-# Copyright 2004-2007 Gentoo Foundation
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-adsl_depend()
-{
- program /usr/sbin/adsl-start /usr/sbin/pppoe-start
- before dhcp
-}
-
-adsl_setup_vars()
-{
- local startstop="$1" cfgexe=
-
- if [ -x /usr/sbin/pppoe-start ]; then
- exe="/usr/sbin/pppoe-${startstop}"
- cfgexe=pppoe-setup
- else
- exe="/usr/sbin/adsl-${startstop}"
- cfgexe=adsl-setup
- fi
-
- # Decide which configuration to use. Hopefully there is an
- # interface-specific one
- cfgfile="/etc/ppp/pppoe-${IFACE}.conf"
- [ -f "${cfgfile}" ] || cfgfile="/etc/ppp/pppoe.conf"
-
- if [ ! -f "${cfgfile}" ]; then
- eerror "no pppoe.conf file found!"
- eerror "Please run ${cfgexe} to create one"
- return 1
- fi
-
- return 0
-}
-
-adsl_start()
-{
- local exe= cfgfile= user=
-
- adsl_setup_vars start || return 1
-
- # Might or might not be set in conf.d/net
- eval user=\$adsl_user_${IFVAR}
-
- # Start ADSL with the cfgfile, but override ETH and PIDFILE
- einfo "Starting ADSL for ${IFACE}"
- (
- cat "${cfgfile}";
- echo "ETH=${IFACE}";
- echo "PIDFILE=/var/run/rp-pppoe-${IFACE}.pid";
- [ -n "${user}" ] && echo "USER=${user}";
- ) | ${exe} >/dev/null
- eend $?
-}
-
-adsl_stop()
-{
- local exe= cfgfile=
-
- [ ! -f /var/run/rp-pppoe-"${IFACE}".pid ] && return 0
-
- adsl_setup_vars stop || return 1
-
- einfo "Stopping ADSL for ${IFACE}"
- (
- cat "${cfgfile}";
- echo "ETH=${IFACE}";
- echo "PIDFILE=/var/run/rp-pppoe-${IFACE}.pid";
- ) | ${exe} >/dev/null
- eend $?
-
- return 0
-}
diff --git a/net.Linux/apipa.sh b/net.Linux/apipa.sh
deleted file mode 100644
index 39da392e..00000000
--- a/net.Linux/apipa.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-apipa_depend()
-{
- program /sbin/arping
-}
-
-_random()
-{
- local r=${RANDOM}
- if [ -n "${r}" ]; then
- echo "${r}"
- else
- uuidgen | sed -n -e 's/[^[:digit:]]//g' -e 's/\(^.\{1,7\}\).*/\1/p'
- fi
-}
-
-apipa_start()
-{
- local iface="$1" i1= i2= addr= i=0
-
- _exists true || return 1
-
- einfo "Searching for free addresses in 169.254.0.0/16"
- eindent
-
- while [ ${i} -lt 64516 ]; do
- i1=$((($(_random) % 255) + 1))
- i2=$((($(_random) % 255) + 1))
-
- addr="169.254.${i1}.${i2}"
- vebegin "${addr}/16"
- if ! arping_address "${addr}"; then
- eval config_${config_index}="\"${addr}/16 broadcast 169.254.255.255\""
- config_index=$((${config_index} - 1))
- veend 0
- eoutdent
- return 0
- fi
-
- i=$((${i} + 1))
- done
-
- eerror "No free address found!"
- eoutdent
- return 1
-}
diff --git a/net.Linux/arping.sh b/net.Linux/arping.sh
deleted file mode 100644
index 8046c47d..00000000
--- a/net.Linux/arping.sh
+++ /dev/null
@@ -1,131 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-arping_depend()
-{
- program /sbin/arping /usr/sbin/arping2
- before interface
-}
-
-arping_address()
-{
- local ip=${1%%/*} mac="$2" spoof="$3" foundmac= i= w= opts=
-
- # We only handle IPv4 addresses
- case "${ip}" in
- 0.0.0.0|0) return 1;;
- *.*.*.*);;
- *) return 1;;
- esac
-
- # We need to bring the interface up to test
- _exists "${iface}" || return 1
- _up "${iface}"
-
- eval w=\$arping_wait_${IFVAR}
- [ -z "${w}" ] && w=${arping_wait:-5}
-
- if type arping2 >/dev/null 2>&1; then
- if [ -n "${spoof}" ]; then
- opts="${opts} -S ${spoof}"
- else
- [ -z "$(_get_inet_address)" ] && opts="${opts} -0"
- fi
- while [ ${w} -gt 0 -a -z "${foundmac}" ]; do
- foundmac="$(arping2 ${opts} -r -c 1 -i "${IFACE}" "${ip}" 2>/dev/null | \
- sed -e 'y/abcdef/ABCDEF/')"
- w=$((${w} - 1))
- done
- else
- [ -z "$(_get_inet_address)" ] && opts="${opts} -D"
-
- foundmac="$(arping -w "${w}" ${opts} -f -I "${IFACE}" "${ip}" 2>/dev/null | \
- sed -n -e 'y/abcdef/ABCDEF/' -e 's/.*\[\([^]]*\)\].*/\1/p')"
- fi
- [ -z "${foundmac}" ] && return 1
-
- if [ -n "${mac}" ]; then
- if [ "${mac}" != "${foundmac}" ]; then
- vewarn "Found ${ip} but MAC ${foundmac} does not match"
- return 1
- fi
- fi
-
- return 0
-}
-
-_arping_in_config()
-{
- _get_array "config_${IFVAR}" | while read i; do
- [ "${i}" = "arping" ] && return 1
- done
- return 1
-}
-
-arping_start()
-{
- local gateways= x= conf= i=
- einfo "Pinging gateways on ${IFACE} for configuration"
-
- eval gateways=\$gateways_${IFVAR}
- if [ -z "${gateways}" ]; then
- eerror "No gateways have been defined (gateways_${IFVAR}=\"...\")"
- return 1
- fi
-
- eindent
-
- for x in ${gateways}; do
- local IFS=,
- set -- ${x}
- local ip=$1 mac=$2 spoof=$3 extra=
- unset IFS
-
- if [ -n "${mac}" ]; then
- mac="$(echo "${mac}" | tr '[:lower:]' '[:upper:]')"
- extra="(MAC ${mac})"
- fi
-
- vebegin "${ip} ${extra}"
- if arping_address "${ip}" "${mac}" "${spoof}"; then
- local IFS=.
- for i in ${ip}; do
- if [ "${#i}" = "2" ]; then
- conf="${conf}0${i}"
- elif [ "${#i}" = "1" ]; then
- conf="${conf}00${i}"
- else
- conf="${conf}${i}"
- fi
- done
- unset IFS
- [ -n "${mac}" ] && conf="${conf}_$(echo "${mac}" | sed -e 's/://g')"
-
- eend 0
- eoutdent
- veinfo "Configuring ${IFACE} for ${ip} ${extra}"
- _configure_variables ${conf}
-
- # Call the system module as we've aleady passed it by ....
- # And it *has* to be pre_start for other things to work correctly
- system_pre_start
-
- # Ensure that we have a valid config - ie arping is no longer there
- local IFS="$__IFS"
- for i in $(_get_array "config_${IFVAR}"); do
- if [ "${i}" = "arping" ]; then
- eend 1 "No config found for ${ip} (config_${conf}=\"...\")"
- continue 2
- fi
- done
- unset IFS
-
- _load_config
- return 0
- fi
- veend 1
- done
-
- eoutdent
- return 1
-}
diff --git a/net.Linux/bonding.sh b/net.Linux/bonding.sh
deleted file mode 100644
index 69de32aa..00000000
--- a/net.Linux/bonding.sh
+++ /dev/null
@@ -1,101 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-bonding_depend()
-{
- before interface macchanger
- program /sbin/ifenslave
-}
-
-_config_vars="$_config_vars slaves"
-
-_is_bond()
-{
- [ -f "/proc/net/bonding/${IFACE}" ]
-}
-
-bonding_pre_start()
-{
- local s= slaves="$(_get_array "slaves_${IFVAR}")"
-
- [ -z "${slaves}" ] && return 0
-
- # Load the kernel module if required
- if [ ! -d /proc/net/bonding ]; then
- if ! modprobe bonding; then
- eerror "Cannot load the bonding module"
- return 1
- fi
- fi
-
- # We can create the interface name we like now, but this
- # requires sysfs
- if ! _exists && [ -d /sys/class/net ]; then
- echo "+${IFACE}" > /sys/class/net/bonding_masters
- fi
- _exists true || return 1
-
- if ! _is_bond; then
- eerror "${IFACE} is not capable of bonding"
- return 1
- fi
-
- ebegin "Adding slaves to ${IFACE}"
- eindent
- einfo "${slaves}"
-
- # Check that our slaves exist
- (
- for IFACE in ${slaves}; do
- _exists true || return 1
- done
-
- # Must force the slaves to a particular state before adding them
- for IFACE in ${slaves}; do
- _delete_addresses
- _up
- done
- )
-
- # now force the master to up
- _up
-
- # finally add in slaves
- eoutdent
- /sbin/ifenslave "${IFACE}" ${slaves} >/dev/null
- eend $?
-
- return 0 #important
-}
-
-bonding_stop()
-{
- _is_bond || return 0
-
- local slaves= s=
- slaves=$( \
- sed -n -e 's/^Slave Interface: //p' "/proc/net/bonding/${IFACE}" \
- | tr '\n' ' ' \
- )
- [ -z "${slaves}" ] && return 0
-
- # remove all slaves
- ebegin "Removing slaves from ${IFACE}"
- eindent
- einfo "${slaves}"
- eoutdent
- /sbin/ifenslave -d "${IFACE}" ${slaves}
-
- # reset all slaves
- (
- for IFACE in ${slaves}; do
- if _exists; then
- _delete_addresses
- _down
- fi
- done
- )
-
- eend 0
- return 0
-}
diff --git a/net.Linux/br2684ctl.sh b/net.Linux/br2684ctl.sh
deleted file mode 100644
index 11ee4f55..00000000
--- a/net.Linux/br2684ctl.sh
+++ /dev/null
@@ -1,59 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-_br2684ctl()
-{
- if [ -x /usr/sbin/br2684ctl ]; then
- echo /usr/sbin/br2684ctl
- else
- echo /sbin/br2684ctl
- fi
-}
-
-br2684ctl_depend()
-{
- before ppp
- program start $(_br2684ctl)
-}
-
-_config_vars="$_config_vars bridge bridge_add brctl"
-
-br2684ctl_pre_start()
-{
- local opts=
- eval opts=\$br2684ctl_${IFVAR}
- [ -z "${opts}" ] && return 0
-
- if [ "${IFACE#nas[0-9]*}" = "${IFACE}" ]; then
- eerror "Interface must be called nas[0-9] for RFC 2684 Bridging"
- return 1
- fi
-
- case " ${opts} " in
- *" -b "*|*" -c "*)
- eerror "The -b and -c options are not allowed for br2684ctl_${IVAR}"
- return 1
- ;;
- *" -a "*);;
- *)
- eerror "-a option (VPI and VCI) is required in br2684ctl_${IFVAR}"
- return 1
- ;;
- esac
-
- einfo "Starting RFC 2684 Bridge control on ${IFACE}"
- start-stop-daemon --start --exec $(_br2684ctl) --background \
- --make-pidfile --pidfile "/var/run/br2684ctl-${IFACE}.pid" \
- -- -c "${IFACE#nas*}" ${opts}
- eend $?
-}
-
-br2684ctl_post_stop()
-{
- local pidfile="/var/run/br2684ctl-${IFACE}.pid"
- [ -e "${pidfile}" ] || return 0
-
- einfo "Stopping RFC 2684 Bridge control on ${IFACE}"
- start-stop-daemon --stop --quiet --pidfile "${pidfile}"
- eend $?
-}
diff --git a/net.Linux/bridge.sh b/net.Linux/bridge.sh
deleted file mode 100644
index 517fe72d..00000000
--- a/net.Linux/bridge.sh
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-bridge_depend()
-{
- before interface macnet
- program /sbin/brctl
-}
-
-_config_vars="$_config_vars bridge bridge_add brctl"
-
-_is_bridge()
-{
- brctl show 2>/dev/null | grep -q "^${IFACE}[[:space:]]"
-}
-
-bridge_pre_start()
-{
- local ports= brif= iface="${IFACE}" e= x=
- local ports="$(_get_array "bridge_${IFVAR}")"
- local opts="$(_get_array "brctl_${IFVAR}")"
-
- eval brif=\$bridge_add_${IFVAR}
- [ -z "${ports}" -a -z "${brif}" -a -z "${opts}" ] && return 0
-
- [ -n "${ports}" ] && bridge_post_stop
-
- (
- if [ -z "${ports}" -a -n "${brif}" ]; then
- ports="${IFACE}"
- IFACE="${brif}"
- else
- ports="${ports}"
- metric=1000
- fi
-
- if ! _is_bridge; then
- ebegin "Creating bridge ${IFACE}"
- if ! brctl addbr "${IFACE}"; then
- eend 1
- return 1
- fi
- fi
-
- local IFS="$__IFS"
- for x in ${opts}; do
- unset IFS
- set -- ${x}
- x=$1
- shift
- set -- "${x}" "${IFACE}" "$@"
- brctl "$@"
- done
- unset IFS
-
- if [ -n "${ports}" ]; then
- einfo "Adding ports to ${IFACE}"
- eindent
-
- local OIFACE="${IFACE}"
- for x in ${ports}; do
- ebegin "${x}"
- local IFACE="${x}"
- _set_flag promisc
- _up
- if ! brctl addif "${OIFACE}" "${x}"; then
- _set_flag -promisc
- eend 1
- return 1
- fi
- eend 0
- done
- eoutdent
- fi
- ) || return 1
-
- # Bring up the bridge
- _up
-}
-
-bridge_post_stop()
-{
- local port= ports= delete=false extra=
-
- if _is_bridge; then
- ebegin "Destroying bridge ${IFACE}"
- _down
- ports="$(brctl show 2>/dev/null | \
- sed -n -e '/^'"${IFACE}"'[[:space:]]/,/^\S/ { /^\('"${IFACE}"'[[:space:]]\|\t\)/s/^.*\t//p }')"
- delete=true
- iface=${IFACE}
- eindent
- else
- # Work out if we're added to a bridge for removal or not
- eval set -- $(brctl show 2>/dev/null | sed -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")
- local line=
- for line; do
- set -- ${line}
- if [ "$3" = "${IFACE}" ]; then
- iface=$1
- break
- fi
- done
- [ -z "${iface}" ] && return 0
- extra=" from ${iface}"
- fi
-
- for port in ${ports}; do
- ebegin "Removing port ${port}${extra}"
- local IFACE="${port}"
- _set_flag -promisc
- brctl delif "${iface}" "${port}"
- eend $?
- done
-
- if ${delete}; then
- eoutdent
- brctl delbr "${iface}"
- eend $?
- fi
-
- return 0
-}
diff --git a/net.Linux/ccwgroup.sh b/net.Linux/ccwgroup.sh
deleted file mode 100644
index d40e7139..00000000
--- a/net.Linux/ccwgroup.sh
+++ /dev/null
@@ -1,67 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-_config_vars="$_config_vars ccwgroup"
-
-ccwgroup_depend()
-{
- before interface
-}
-
-ccwgroup_pre_start()
-{
- local ccwgroup="$(_get_array "ccwgroup_${IFVAR}")"
- [ -z "${ccwgroup}" ] && return 0
-
- if [ ! -d /sys/bus/ccwgroup ]; then
- modprobe qeth
- if [ ! -d /sys/bus/ccwgroup ]; then
- eerror "ccwgroup support missing in kernel"
- return 1
- fi
- fi
-
- einfo "Enabling ccwgroup on ${IFACE}"
- local x= ccw= first= layer2=
- for x in ${ccwgroup}; do
- [ -z "${first}" ] && first=${x}
- ccw="${ccw}${ccw:+,}${x}"
- done
- if [ -e /sys/devices/qeth/"${first}" ]; then
- echo "0" >/sys/devices/qeth/"${first}"/online
- else
- echo "${ccw}" >/sys/bus/ccwgroup/drivers/qeth/group
- fi
- eval layer2=\$qeth_layer2_${IFVAR}
- echo "${layer2:-0}" > /sys/devices/qeth/"${first}"/layer2
- echo "1" >/sys/devices/qeth/"${first}"/online
- eend $?
-}
-
-ccwgroup_pre_stop()
-{
- # Erase any existing ccwgroup to be safe
- service_set_value ccwgroup_device ""
-
- [ ! -L /sys/class/net/"${FACE}"/driver ] && return 0
- local driver="$(readlink /sys/class/net/"${IFACE}"/driver)"
- case "${diver}" in
- */bus/ccwgroup/*);;
- *) return 0;;
- esac
-
- local device="$(readlink /sys/class/net/"${IFACE}"/device)"
- device=${device##*/}
- service_set_value ccwgroup_device "${device}"
-}
-
-ccwgroup_post_stop()
-{
- local device="$(service_get_value ccwgroup_device)"
- [ -z "${device}" ] && return 0
-
- einfo "Disabling ccwgroup on ${iface}"
- echo "0" >/sys/devices/qeth/"${device}"/online
- echo "1" >/sys/devices/qeth/"${device}"/ungroup
- eend $?
-}
diff --git a/net.Linux/clip.sh b/net.Linux/clip.sh
deleted file mode 100644
index 78344d23..00000000
--- a/net.Linux/clip.sh
+++ /dev/null
@@ -1,221 +0,0 @@
-# Copyright 2005-2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-clip_depend()
-{
- program /usr/sbin/atmsigd
- before interface
-}
-
-_config_vars="$_config_vars clip"
-
-# This starts a service. Albeit atmsigd, ilmid and atmarpd do allow for back-
-# grounding through the -b option, its usage causes them to be sensible to
-# SIGHUP, which is sent to all daemons when console detaches right after
-# startup. This is probably due to the fact that these programs don't detach
-# themself from the controlling terminal when backgrounding... The only way I
-# see to overcame this is to use the --background option in start-stop-daemon,
-# which is reported as a "last resort" method, but it acts correctly about this.
-atmclip_svc_start()
-{
- ebegin "Starting $2 Daemon ($1)"
- start-stop-daemon --start \
- --background \
- --make-pidfile --pidfile "/var/run/$1.pid" \
- --exec "/usr/sbin/$1" -- -l syslog
- eend $?
-}
-
-atmclip_svcs_start()
-{
- einfo "First CLIP instance: starting ATM CLIP daemons"
- eindent
-
- if yesno ${clip_full:-yes}; then
- atmclip_svc_start atmsigd "Signaling" && \
- atmclip_svc_start ilmid "Integrated Local Management Interface" && \
- atmclip_svc_start atmarpd "Address Resolution Protocol"
- else
- atmclip_svc_start atmarpd "Address Resolution Protocol"
- fi
-
- local r=$?
-
- eoutdent
- return ${r}
-}
-
-atmclip_svc_stop()
-{
- ebegin "Stopping $2 Daemon ($1)"
- start-stop-daemon --stop --quiet \
- --pidfile "/var/run/$1.pid" \
- --exec "/usr/sbin/$1"
- eend $?
-}
-
-atmclip_svcs_stop()
-{
- einfo "Last CLIP instance: stopping ATM CLIP daemons"
- eindent
-
- # Heartake operation!
- sync
-
- atmclip_svc_stop atmarpd "Address Resolution Protocol"
- if yesno ${clip_full:-yes}; then
- atmclip_svc_stop ilmid "Integrated Local Management Interface"
- atmclip_svc_stop atmsigd "Signaling"
- fi
-
- eoutdent
-}
-
-are_atmclip_svcs_running()
-{
-
- start-stop-daemon --quiet --test --stop --pidfile /var/run/atmarpd.pid || return 1
-
- if yesno ${clip_full:-yes}; then
- start-stop-daemon --quiet --test --stop --pidfile /var/run/ilmid.pid || return 1
- start-stop-daemon --quiet --test --stop --pidfile /var/run/atmsigd.pid || return 1
- fi
-
- return 0
-}
-
-clip_pre_start()
-{
- local clip=
- eval clip=\$clip_${IFVAR}
- [ -z "${clip}" ] && return 0
-
- if [ ! -r /proc/net/atm/arp ]; then
- modprobe clip && sleep 2
- if [ ! -r /proc/net/atm/arp ]; then
- eerror "You need first to enable kernel support for ATM CLIP"
- return 1
- fi
- fi
-
- local started_here=
- if ! are_atmclip_svcs_running; then
- atmclip_svcs_start || return 1
- started_here=1
- fi
-
- if ! _exists; then
- ebegin "Creating CLIP interface ${IFACE}"
- atmarp -c "${IFACE}"
- if ! eend $?; then
- [ -z "${started_here}" ] && atmclip_svcs_stop
- return 1
- fi
- fi
-
- return 0
-}
-
-clip_post_start()
-{
- local clip="$(_get_array "clip_${IFVAR}")"
- [ -z "${clip}" ] && return 0
-
- are_atmclip_svcs_running || return 1
-
- # The atm tools (atmarpd?) are silly enough that they would not work with
- # iproute2 interface setup as opposed to the ifconfig one.
- # The workaround is to temporarily toggle the interface state from up
- # to down and then up again, without touching its address. This (should)
- # work with both iproute2 and ifconfig.
- _down
- _up
-
- # Now the real thing: create a PVC with our peer(s).
- # There are cases in which the ATM interface is not yet
- # ready to establish new VCCs. In that cases, atmarp would
- # fail. Here we allow 10 retries to happen every 2 seconds before
- # reporting problems. Also, when no defined VC can be established,
- # we stop the ATM daemons.
- local has_failures= i=
- for i in ${clip}; do
- local IFS=","
- set -- ${i}
- unset IFS
- local peerip="$1"; shift
- local ifvpivci="$1"; shift
- ebegin "Creating PVC ${ifvpivci} for peer ${peerip}"
-
- local nleftretries=10 emsg= ecode=
- while [ ${nleftretries} -gt 0 ]; do
- nleftretries=$((${nleftretries} - 1))
- emsg="$(atmarp -s "${peerip}" "${ifvpivci}" "$@" 2>&1)"
- ecode=$? && break
- sleep 2
- done
-
- if ! eend ${ecode}; then
- eerror "Creation failed for PVC ${ifvpivci}: ${emsg}"
- has_failures=1
- fi
- done
-
- if [ -n "${has_failures}" ]; then
- clip_pre_stop "${iface}"
- clip_post_stop "${iface}"
- return 1
- else
- return 0
- fi
-}
-
-clip_pre_stop()
-{
- are_atmclip_svcs_running || return 0
-
- # We remove all the PVCs which may have been created by
- # clip_post_start for this interface. This shouldn't be
- # needed by the ATM stack, but sometimes I got a panic
- # killing CLIP daemons without previously vacuuming
- # every active CLIP PVCs.
- # The linux 2.6's ATM stack is really a mess...
- local itf= t= encp= idle= ipaddr= left=
- einfo "Removing PVCs on this interface"
- eindent
- {
- read left && \
- while read itf t encp idle ipaddr left; do
- if [ "${itf}" = "${IFACE}" ]; then
- ebegin "Removing PVC to ${ipaddr}"
- atmarp -d "${ipaddr}"
- eend $?
- fi
- done
- } < /proc/net/atm/arp
- eoutdent
-}
-
-# Here we should teorically delete the interface previously created in the
-# clip_pre_start function, but there is no way to "undo" an interface creation.
-# We can just leave the interface down. "ifconfig -a" will still list it...
-# Also, here we can stop the ATM CLIP daemons if there is no other CLIP PVC
-# outstanding. We check this condition by inspecting the /proc/net/atm/arp file.
-clip_post_stop()
-{
- are_atmclip_svcs_running || return 0
-
- local itf= left= hasothers=
- {
- read left && \
- while read itf left; do
- if [ "${itf}" != "${IFACE}" ]; then
- hasothers=1
- break
- fi
- done
- } < /proc/net/atm/arp
-
- if [ -z "${hasothers}" ]; then
- atmclip_svcs_stop || return 1
- fi
-}
diff --git a/net.Linux/ifconfig.sh b/net.Linux/ifconfig.sh
deleted file mode 100644
index f82f25c3..00000000
--- a/net.Linux/ifconfig.sh
+++ /dev/null
@@ -1,291 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-ifconfig_depend()
-{
- program /sbin/ifconfig
- provide interface
-}
-
-_up()
-{
- ifconfig "${IFACE}" up
-}
-
-_down()
-{
- ifconfig "${IFACE}" down
-}
-
-_exists()
-{
- grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/dev
-}
-
-_ifindex()
-{
- local line= i=-2
- while read line; do
- i=$((${i} + 1))
- [ ${i} -lt 1 ] && continue
- case "${line}" in
- "${IFACE}:"*) echo "${i}"; return 0;;
- esac
- done < /proc/net/dev
-
- # Return the next available index
- i=$((${i} + 1))
- echo "${i}"
- return 1
-}
-
-_is_wireless()
-{
- # Support new sysfs layout
- [ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
-
- [ ! -e /proc/net/wireless ] && return 1
- grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
-}
-
-_set_flag()
-{
- ifconfig "${IFACE}" "$1"
-}
-
-_get_mac_address()
-{
- local mac=$(LC_ALL=C ifconfig "${IFACE}" | \
- sed -n -e 's/.* HWaddr \(..:..:..:..:..:..\).*/\1/p')
-
- case "${mac}" in
- 00:00:00:00:00:00);;
- 44:44:44:44:44:44);;
- FF:FF:FF:FF:FF:FF);;
- "");;
- *) echo "${mac}"; return 0;;
- esac
-
- return 1
-}
-
-_set_mac_address()
-{
- ifconfig "${IFACE}" hw ether "$1"
-}
-
-_get_inet_address()
-{
- set -- $(LC_ALL=C ifconfig "${IFACE}" |
- sed -n -e 's/.*inet addr:\([^ ]*\).*Mask:\([^ ]*\).*/\1 \2/p')
- [ -z "$1" ] && return 1
-
- echo -n "$1"
- shift
- echo "/$(_netmask2cidr "$1")"
-}
-
-_get_inet_addresses()
-{
- local iface=${IFACE} i=0
- local addrs="$(_get_inet_address)"
-
- while true; do
- local IFACE="${iface}:${i}"
- _exists || break
- local addr="$(_get_inet_address)"
- [ -n "${addr}" ] && addrs="${addrs}${addrs:+ }${addr}"
- i=$((${i} + 1))
- done
- echo "${addrs}"
-}
-
-_cidr2netmask()
-{
- local cidr="$1" netmask="" done=0 i=0 sum=0 cur=128
- local octets= frac=
-
- local octets=$((${cidr} / 8))
- local frac=$((${cidr} % 8))
- while [ ${octets} -gt 0 ]; do
- netmask="${netmask}.255"
- octets=$((${octets} - 1))
- done=$((${done} + 1))
- done
-
- if [ ${done} -lt 4 ]; then
- while [ ${i} -lt ${frac} ]; do
- sum=$((${sum} + ${cur}))
- cur=$((${cur} / 2))
- i=$((${i} + 1))
- done
- netmask="${netmask}.${sum}"
- done=$((${done} + 1))
-
- while [ ${done} -lt 4 ]; do
- netmask="${netmask}.0"
- done=$((${done} + 1))
- done
- fi
-
- echo "${netmask#.*}"
-}
-
-_add_address()
-{
- if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then
- ifconfig "${IFACE}" "$@" 2>/dev/null
- return 0
- fi
-
- case "$1" in
- *:*) ifconfig "${IFACE}" inet6 add "$@"; return $?;;
- esac
-
- # IPv4 is tricky - ifconfig requires an aliased device
- # for multiple addresses
- local iface="${IFACE}"
- if LC_ALL=C ifconfig "${iface}" | grep -Eq "\<inet addr:.*"; then
- # Get the last alias made for the interface and add 1 to it
- i=$(ifconfig | sed '1!G;h;$!d' | grep -m 1 -o "^${iface}:[0-9]*" \
- | sed -n -e 's/'"${iface}"'://p')
- i=$((${i:-0} + 1))
- iface="${iface}:${i}"
- fi
-
- # ifconfig doesn't like CIDR addresses
- local ip="${1%%/*}" cidr="${1##*/}" netmask=
- if [ -n "${cidr}" -a "${cidr}" != "${ip}" ]; then
- netmask="$(_cidr2netmask "${cidr}")"
- shift
- set -- "${ip}" netmask "${netmask}" "$@"
- fi
-
- local arg= cmd=
- while [ -n "$1" ]; do
- case "$1" in
- brd)
- if [ "$2" = "+" ]; then
- shift
- else
- cmd="${cmd} broadcast"
- fi
- ;;
- peer) cmd="${cmd} pointtopoint";;
- *) cmd="${cmd} $1";;
- esac
- shift
- done
-
- ifconfig "${iface}" ${cmd}
-}
-
-_add_route()
-{
- local inet6=
-
- if [ -n "${metric}" ]; then
- set -- "$@" metric ${metric}
- fi
-
- if [ $# -eq 3 ]; then
- set -- "$1" "$2" gw "$3"
- elif [ "$3" = "via" ]; then
- local one=$1 two=$2
- shift; shift; shift
- set -- "${one}" "${two}" gw "$@"
- fi
-
- case "$@" in
- *:*)
- inet6="-A inet6"
- [ "$1" = "-net" ] && shift
- ;;
- esac
-
- route ${inet6} add "$@" dev "${IFACE}"
-}
-
-_delete_addresses()
-{
- # We don't remove addresses from aliases
- case "${IFACE}" in
- *:*) return 0;;
- esac
-
- einfo "Removing addresses"
- eindent
- # iproute2 can add many addresses to an iface unlike ifconfig ...
- # iproute2 added addresses cause problems for ifconfig
- # as we delete an address, a new one appears, so we have to
- # keep polling
- while true; do
- local addr=$(_get_inet_address)
- [ -z "${addr}" ] && break
-
- if [ "${addr}" = "127.0.0.1/8" ]; then
- # Don't delete the loopback address
- [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ] && break
- fi
- einfo "${addr}"
- ifconfig "${IFACE}" 0.0.0.0 || break
- done
-
- # Remove IPv6 addresses
- local addr=
- for addr in $(LC_ALL=C ifconfig "${IFACE}" | \
- sed -n -e 's/^.*inet6 addr: \([^ ]*\) Scope:[^L].*/\1/p'); do
- [ "${addr}" = "::1/128" -a "${IFACE}" = "lo" ] && continue
- einfo "${addr}"
- ifconfig "${IFACE}" inet6 del "${addr}"
- done
-
- return 0
-}
-
-_has_carrier()
-{
- return 0
-}
-
-_tunnel()
-{
- iptunnel "$@"
-}
-
-ifconfig_pre_start()
-{
- # MTU support
- local mtu=
- eval mtu=\$mtu_${IFVAR}
- [ -n "${mtu}" ] && ifconfig "${IFACE}" mtu "${mtu}"
-
- # TX Queue Length support
- local len=
- eval len=\$txqueuelen_${IFVAR}
- [ -n "${len}" ] && ifconfig "${IFACE}" txqueuelen "${len}"
-
- local tunnel=
-
- eval tunnel=\$iptunnel_${IFVAR}
- [ -z "${tunnel}" ] && return 0
-
- # Set our base metric to 1000
- metric=1000
-
- ebegin "Creating tunnel ${IFVAR}"
- iptunnel add "${tunnel}"
- eend $?
-}
-
-ifconfig_post_stop()
-{
- # Don't delete sit0 as it's a special tunnel
- [ "${IFACE}" = "sit0" ] && return 0
-
- [ -z "$(iptunnel show "${IFACE}" 2>/dev/null)" ] && return 0
-
- ebegin "Destroying tunnel ${IFACE}"
- iptunnel del "${IFACE}"
- eend $?
-}
diff --git a/net.Linux/ifplugd.sh b/net.Linux/ifplugd.sh
deleted file mode 100644
index db7007ae..00000000
--- a/net.Linux/ifplugd.sh
+++ /dev/null
@@ -1,92 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-_config_vars="$_config_vars plug_timeout"
-
-ifplugd_depend()
-{
- program start /usr/sbin/ifplugd
- after macnet rename
- before interface
- provide plug
-}
-
-ifplugd_pre_start()
-{
- local pidfile="/var/run/ifplugd.${IFACE}.pid" timeout= args=
-
- # We don't start ifplugd if we're being called from the background
- yesno ${IN_BACKGROUND} && return 0
-
- _exists || return 0
-
- # We need a valid MAC address
- # It's a basic test to ensure it's not a virtual interface
- if ! _get_mac_address >/dev/null 2>&1; then
- vewarn "ifplugd only works on interfaces with a valid MAC address"
- return 0
- fi
-
- # We don't work on bonded, bridges, tun/tap, vlan or wireless
- for f in bond bridge tuntap vlan wireless; do
- if type "_is_${f}" >/dev/null 2>&1; then
- if _is_${f}; then
- veinfo "netplug does not work with" "${f}"
- return 0
- fi
- fi
- done
-
- ebegin "Starting ifplugd on" "${IFACE}"
-
- eval args=\$ifplugd_${IFVAR}
-
- # Mark the us as inactive so netplug can restart us
- mark_service_inactive
-
- # Start ifplugd
- eval start-stop-daemon --start --exec /usr/sbin/ifplugd \
- --pidfile "${pidfile}" -- "${args}" --iface="${IFACE}"
- eend "$?" || return 1
-
- eindent
-
- eval timeout=\$plug_timeout_${IFVAR}
- [ -z "${timeout}" ] && timeout=-1
- if [ ${timeout} -eq 0 ]; then
- ewarn "WARNING: infinite timeout set for ${IFACE} to come up"
- elif [ ${timeout} -lt 0 ]; then
- einfo "Backgrounding ..."
- exit 1
- fi
-
- veinfo "Waiting for ${IFACE} to be marked as started"
-
- local i=0
- while true; do
- if service_started; then
- _show_address
- exit 0
- fi
- sleep 1
- [ ${timeout} -eq 0 ] && continue
- i=$((${i} + 1))
- [ ${i} -ge ${timeout} ] && break
- done
-
- eend 1 "Failed to configure ${IFACE} in the background"
- exit 1
-}
-
-ifplugd_stop()
-{
- yesno ${IN_BACKGROUND} && return 0
-
- local pidfile="/var/run/ifplugd.${IFACE}.pid"
- [ ! -e "${pidfile}" ] && return 0
-
- ebegin "Stopping ifplugd on" "${IFACE}"
- start-stop-daemon --stop --quiet --exec /usr/sbin/ifplugd \
- --pidfile "${pidfile}" --signal QUIT
- eend $?
-}
diff --git a/net.Linux/ip6to4.sh b/net.Linux/ip6to4.sh
deleted file mode 100644
index d58eb31f..00000000
--- a/net.Linux/ip6to4.sh
+++ /dev/null
@@ -1,99 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-_config_vars="$_config_vars link suffix relay"
-
-ip6to4_depend()
-{
- after interface
-}
-
-ip6to4_start()
-{
- case " ${MODULES} " in
- *" ifconfig "*)
- if [ "${IFACE}" != "sit0" ]; then
- eerror "ip6to4 can only work on the sit0 interface using ifconfig"
- eerror "emerge sys-apps/iproute2 to use other interfaces"
- return 1
- fi
- esac
-
- local host= suffix= relay= addr= iface=${IFACE} new= localip=
- eval host=\$link_${IFVAR}
- if [ -z "${host}" ]; then
- eerror "link_${IFVAR} not set"
- return 1
- fi
-
- eval suffix=\${suffix_${IFVAR}:-1}
- eval relay=\${relay_${IFVAR}:-192.88.99.1}
-
- IFACE=${host}
- addrs=$(_get_inet_addresses)
- IFACE=${iface}
- if [ -z "${addrs}" ]; then
- eerror "${host} is not configured with an IPv4 address"
- return 1
- fi
-
- for addr in ${addrs}; do
- # Strip the subnet
- local ip="${addr%/*}" subnet="${addr#*/}"
- # We don't work on private IPv4 addresses
- case "${ip}" in
- 127.*) continue;;
- 10.*) continue;;
- 192.168.*) continue;;
- 172.*)
- local i=16
- while [ ${i} -lt 32 ]; do
- case "${ip}" in
- 172.${i}.*) break;;
- esac
- i=$((${i} + 1))
- done
- [ ${i} -lt 32 ] && continue
- ;;
- esac
-
- veinfo "IPv4 address on ${host}: ${ip}/${subnet}"
- local ipa= ip6= IFS="${IFS}."
- for i in ${ip}; do
- ipa="${ipa} ${i}"
- done
- unset IFS
- eval ip6="$(printf "2002:%02x%02x:%02x%02x::%s" ${ipa} ${suffix})"
- veinfo "Derived IPv6 address: ${ip6}"
-
- # Now apply our IPv6 address to our config
- new="${new}${new:+ }${ip6}/16"
-
- if [ -n "${localip}" ]; then
- localip="any"
- else
- localip="${ip}"
- fi
- done
-
- if [ -z "${new}" ]; then
- eerror "No global IPv4 addresses found on interface ${host}"
- return 1
- fi
-
- if [ "${IFACE}" != "sit0" ]; then
- ebegin "Creating 6to4 tunnel on ${IFACE}"
- _tunnel add "${IFACE}" mode sit ttl 255 remote any local "${localip}"
- eend $? || return 1
- _up
- fi
-
- # Now apply our config
- eval config_${config_index}=\'"${new}"\'
- config_index=$((${config_index} - 1))
-
- # Add a route for us, ensuring we don't delete anything else
- local routes="$(_get_array "routes_${IFVAR}")
-2003::/3 via ::${relay} metric 2147483647"
- eval routes_${IFVAR}=\$routes
-}
diff --git a/net.Linux/ipppd.sh b/net.Linux/ipppd.sh
deleted file mode 100644
index cf4558d2..00000000
--- a/net.Linux/ipppd.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-ipppd_depend()
-{
- program start /usr/sbin/ipppd
- after macnet
- before interface
- provide isdn
-}
-
-_config_vars="$_config_vars ipppd"
-
-ipppd_pre_start()
-{
- local opts= pidfile="/var/run/ipppd-${IFACE}.pid"
-
- # Check that we are a valid ippp interface
- case "${IFACE}" in
- ippp[0-9]*);;
- *) return 0;;
- esac
-
- # Check that the interface exists
- _exists || return 1
-
- # Might or might not be set in conf.d/net
- eval opts=\$ipppd_${IFVAR}
-
- einfo "Starting ipppd for ${IFACE}"
- start-stop-daemon --start --exec /usr/sbin/ipppd \
- --pidfile "${pidfile}" \
- -- ${opts} pidfile "${pidfile}" \
- file "/etc/ppp/options.${IFACE}" >/dev/null
- eend $?
-}
-
-ipppd_post_stop()
-{
- local pidfile="/var/run/ipppd-${IFACE}.pid"
-
- [ ! -f "${pidfile}" ] && return 0
-
- einfo "Stopping ipppd for ${IFACE}"
- start-stop-daemon --stop --quiet --exec /usr/sbin/ipppd \
- --pidfile "${pidfile}"
- eend $?
-}
diff --git a/net.Linux/iproute2.sh b/net.Linux/iproute2.sh
deleted file mode 100644
index de765378..00000000
--- a/net.Linux/iproute2.sh
+++ /dev/null
@@ -1,241 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-iproute2_depend()
-{
- program /sbin/ip
- provide interface
- after ifconfig
-}
-
-_up()
-{
- ip link set up dev "${IFACE}"
-}
-
-_down()
-{
- ip link set down dev "${IFACE}"
-}
-
-_exists()
-{
- grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/dev
-}
-
-_ifindex()
-{
- local line= i=-2
- while read line; do
- i=$((${i} + 1))
- [ ${i} -lt 1 ] && continue
- case "${line}" in
- "${IFACE}:"*) echo "${i}"; return 0;;
- esac
- done < /proc/net/dev
-
- # Return the next available index
- i=$((${i} + 1))
- echo "${i}"
- return 1
-}
-
-_is_wireless()
-{
- # Support new sysfs layout
- [ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
-
- [ ! -e /proc/net/wireless ] && return 1
- grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
-}
-
-_set_flag()
-{
- local flag=$1 opt="on"
- if [ "${flag#-}" != "${flag}" ]; then
- flag=${flag#-}
- opt="off"
- fi
- ip link set "${IFACE}" "${flag}" "${opt}"
-}
-
-_get_mac_address()
-{
- local mac=$(LC_ALL=C ip link show "${IFACE}" | sed -n \
- -e 'y/abcdef/ABCDEF/' \
- -e '/link\// s/^.*\<\(..:..:..:..:..:..\)\>.*/\1/p')
-
- case "${mac}" in
- 00:00:00:00:00:00);;
- 44:44:44:44:44:44);;
- FF:FF:FF:FF:FF:FF);;
- "");;
- *) echo "${mac}"; return 0;;
- esac
-
- return 1
-}
-
-_set_mac_address()
-{
- ip link set address "$1" dev "${IFACE}"
-}
-
-_get_inet_addresses()
-{
- LC_ALL=C ip -family inet addr show "${IFACE}" | \
- sed -n -e 's/.*inet \([^ ]*\).*/\1/p'
-}
-
-_get_inet_address()
-{
- set -- $(_get_inet_addresses)
- [ $# = "0" ] && return 1
- echo "$1"
-}
-
-_add_address()
-{
- if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then
- ip addr add "$@" dev "${IFACE}" 2>/dev/null
- return 0
- fi
-
- # Convert an ifconfig line to iproute2
- if [ "$2" = "netmask" ]; then
- local one="$1" three="$3"
- shift; shift; shift
- set -- "${one}/$(_netmask2cidr "${three}")" "$@"
- fi
-
- #config=( "${config[@]//pointopoint/peer}" )
-
- # Always scope lo addresses as host unless specified otherwise
- if [ "${IFACE}" = "lo" ]; then
- set -- "$@" "scope" "host"
- fi
-
- # IPv4 specifics
- case "$1" in
- *.*.*.*)
- case "$@" in
- *" brd "*);;
- *" broadcast "*);;
- *) set -- "$@" brd +;;
- esac
- ;;
- esac
-
- ip addr add dev "${IFACE}" "$@"
-}
-
-_add_route()
-{
- if [ $# -eq 3 ]; then
- set -- "$1" "$2" via "$3"
- elif [ "$3" = "gw" ]; then
- local one=$1 two=$2
- shift; shift; shift
- set -- "${one}" "${two}" via "$@"
- fi
-
- local cmd= have_metric=false
- while [ -n "$1" ]; do
- case "$1" in
- metric) cmd="${cmd} $1"; have_metric=true;;
- netmask) cmd="${cmd}/$(_netmask2cidr "$2")"; shift;;
- -host|-net);;
- -A) [ "$2" = "inet6" ] && shift;;
- *) cmd="${cmd} $1";;
- esac
- shift
- done
-
- if ! ${have_metric} && [ -n "${metric}" ]; then
- cmd="${cmd} metric ${metric}"
- fi
-
- ip route append ${cmd} dev "${IFACE}"
- eend $?
-}
-
-_delete_addresses()
-{
- ip addr flush dev "${IFACE}" scope global 2>/dev/null
- ip addr flush dev "${IFACE}" scope site 2>/dev/null
- if [ "${IFACE}" != "lo" ]; then
- ip addr flush dev "${IFACE}" scope host 2>/dev/null
- fi
- return 0
-}
-
-_has_carrier()
-{
- return 0
-}
-
-_tunnel()
-{
- ip tunnel "$@"
-}
-
-iproute2_pre_start()
-{
- # MTU support
- local mtu=
- eval mtu=\$mtu_${IFVAR}
- [ -n "${mtu}" ] && ip link set mtu "${mtu}" dev "${IFACE}"
-
- # TX Queue Length support
- local len=
- eval len=\$txqueuelen_${IFVAR}
- [ -n "${len}" ] && ip link set txqueuelen "${len}" dev "${IFACE}"
-
- local tunnel=
- eval tunnel=\$iptunnel_${IFVAR}
- if [ -n "${tunnel}" ]; then
- # Set our base metric to 1000
- metric=1000
-
- ebegin "Creating tunnel ${IFVAR}"
- ip tunnel add ${tunnel} name "${IFACE}"
- eend $? || return 1
- _up
- fi
-
- return 0
-}
-
-_iproute2_ipv6_tentative()
-{
- LC_ALL=C ip addr show dev "${IFACE}" | \
- grep -q "^[[:space:]]*inet6 .* tentative"
-}
-
-iproute2_post_start()
-{
- # Kernel may not have IP built in
- if [ -e /proc/net/route ]; then
- ip route flush table cache dev "${IFACE}"
- fi
-
- if _iproute2_ipv6_tentative; then
- ebegin "Waiting for IPv6 addresses"
- while true; do
- _iproute2_ipv6_tentative || break
- done
- eend 0
- fi
-}
-
-iproute2_post_stop()
-{
- # Don't delete sit0 as it's a special tunnel
- if [ "${IFACE}" != "sit0" ]; then
- if [ -n "$(ip tunnel show "${IFACE}" 2>/dev/null)" ]; then
- ebegin "Destroying tunnel ${IFACE}"
- ip tunnel del "${IFACE}"
- eend $?
- fi
- fi
-}
diff --git a/net.Linux/iwconfig.sh b/net.Linux/iwconfig.sh
deleted file mode 100644
index 1610cba3..00000000
--- a/net.Linux/iwconfig.sh
+++ /dev/null
@@ -1,761 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-_config_vars="$_config_vars ssid mode associate_timeout sleep_scan"
-_config_vars="$_config_vars preferred_aps blacklist_aps"
-
-iwconfig_depend()
-{
- program /sbin/iwconfig
- after plug
- before interface
- provide wireless
-}
-
-iwconfig_get_wep_status()
-{
- local mode= status="disabled"
-
- # No easy way of doing this grep in bash regex :/
- if LC_ALL=C iwconfig "${IFACE}" | \
- grep -qE "^ +Encryption key:[*0-9,A-F]"; then
- status="enabled"
- mode=$(LC_ALL=C iwconfig "${IFACE}" | \
- sed -n -e 's/^.*Security mode:\(.*[^ ]\).*/\1/p')
- [ -n "${mode}" ] && mode=" - ${mode}"
- fi
-
- echo "(WEP ${status}${mode})"
-}
-
-_get_ssid()
-{
- local i=5 ssid=
-
- while [ ${i} -gt 0 ]; do
- ssid=$(iwgetid --raw "${IFACE}")
- if [ -n "${ssid}" ]; then
- echo "${ssid}"
- return 0
- fi
- sleep 1
- i=$((${i} + 1))
- done
-
- return 1
-}
-
-_get_ap_mac_address()
-{
- local mac="$(iwgetid --raw --ap "${IFACE}")"
- case "${mac}" in
- "00:00:00:00:00:00") return 1;;
- "44:44:44:44:44:44") return 1;;
- "FF:00:00:00:00:00") return 1;;
- "FF:FF:FF:FF:FF:FF") return 1;;
- *) echo "${mac}";;
- esac
-}
-
-iwconfig_get_mode()
-{
- LC_ALL=C iwgetid --mode "${IFACE}" | \
- sed -n -e 's/^.*Mode:\(.*\)/\1/p' | \
- tr '[:upper:]' '[:lower:]'
-}
-
-iwconfig_set_mode()
-{
- local mode="$1"
- [ "${mode}" = "$(iwconfig_get_mode)" ] && return 0
-
- # Devicescape stack requires the interface to be down
- _down
- iwconfig "${IFACE}" mode "${mode}" || return 1
- _up
-}
-
-iwconfig_get_type()
-{
- LC_ALL=C iwconfig "${IFACE}" | \
- sed -n -e 's/^'"$1"' *\([^ ]* [^ ]*\).*/\1/p'
-}
-
-iwconfig_report()
-{
- local mac= m="connected to"
- local ssid="$(_get_ssid)"
- local wep_status="$(iwconfig_get_wep_status)"
- local channel="$(iwgetid --raw --channel "${iface}")"
- [ -n "${channel}" ] && channel="on channel ${channel} "
- local mode="$(iwconfig_get_mode)"
- if [ "${mode}" = "master" ]; then
- m="configured as"
- else
- mac="$(_get_ap_mac_address)"
- [ -n "${mac}" ] && mac=" at ${mac}"
- fi
-
- eindent
- einfo "${IFACE} ${m} SSID \"${SSID}\"${mac}"
- einfo "in ${mode} mode ${channel}${wep_status}"
- eoutdent
-}
-
-iwconfig_get_wep_key()
-{
- local mac="$1" key=
- [ -n "${mac}" ] && mac="$(echo "${mac}" | sed -e 's/://g')"
- eval key=\$mac_key_${mac}
- [ -z "${key}" ] && eval key=\$key_${SSIDVAR}
- if [ -z "${key}" ]; then
- echo "off"
- else
- set -- ${key}
- local x= e=false
- for x; do
- if [ "${x}" = "enc" ]; then
- e=true
- break
- fi
- done
- ${e} || key="${key} enc open"
- echo "${key}"
- fi
-}
-
-iwconfig_user_config()
-{
- local conf= var=${SSIDVAR} config=
- [ -z "${var}" ] && var=${IFVAR}
-
- config="$(_get_array "iwconfig_${var}")"
- local IFS="$__IFS"
- for conf in ${config}; do
- unset IFS
- if ! eval iwconfig "${IFACE}" "${conf}"; then
- ewarn "${IFACE} does not support the following configuration commands"
- ewarn " ${conf}"
- fi
- done
- unset IFS
-
- config="$(_get_array "iwpriv_${var}")"
- local IFS="$__IFS"
- for conf in ${config}; do
- unset IFS
- if ! eval iwpriv "${IFACE}" "${conf}"; then
- ewarn "${IFACE} does not support the following private ioctls"
- ewarn " ${conf}"
- fi
- done
-}
-
-iwconfig_setup_specific()
-{
- local mode="$1" channel=
- if [ -z "${SSID}" ]; then
- eerror "${IFACE} requires an SSID to be set to operate in ${mode} mode"
- eerror "adjust the ssid_${IFVAR} setting in /etc/conf.d/net"
- return 1
- fi
- SSIDVAR=$(shell_var "${SSID}")
- local key=$(iwconfig_get_wep_key)
-
- iwconfig_set_mode "${mode}"
-
- # Now set the key
- if ! eval iwconfig "${IFACE}" key "${key}"; then
- if [ "${key}" != "off" ]; then
- ewarn "${IFACE} does not support setting keys"
- ewarn "or the parameter \"mac_key_${SSIDVAR}\" or \"key_${SSIDVAR}\" is incorrect"
- fi
- fi
-
- # Then set the SSID
- if ! iwconfig "${IFACE}" essid "${SSID}"; then
- eerror "${IFACE} does not support setting SSID to \"${SSID}\""
- return 1
- fi
-
- eval channel=\$channel_${SSIDVAR}
- [ -z "${channel}" ] && eval channel=\$channel_${IFVAR}
- # We default the channel to 3
- if ! iwconfig "${IFACE}" channel "${channel:-3}"; then
- ewarn "${IFACE} does not support setting the channel to \"${channel:-3}\""
- return 1
- fi
-
- # Finally apply the user Config
- iwconfig_user_config
-
- iwconfig_report
- return 0
-}
-
-iwconfig_wait_for_association()
-{
- local timeout= i=0
- eval timeout=\$associate_timeout_${IFVAR}
- timeout=${timeout:-10}
-
- [ ${timeout} -eq 0 ] \
- && vewarn "WARNING: infinite timeout set for association on ${IFACE}"
-
- while true; do
- # Use sysfs if we can
- if [ -e /sys/class/net/"${IFACE}"/carrier ]; then
- if [ "$(cat /sys/class/net/"${IFACE}"/carrier)" = "1" ]; then
- # Double check we have an ssid. This is mainly for buggy
- # prism54 drivers that always set their carrier on :/
- [ -n "$(iwgetid --raw "${IFACE}")" ] && return 0
- fi
- else
- local atest=
- eval atest=\$associate_test_${IFVAR}
- atest=${atest:-mac}
- if [ "${atest}" = "mac" -o "${atest}" = "all" ]; then
- [ -n "$(_get_ap_mac_address)" ] && return 0
- fi
- if [ "${atest}" = "quality" -o "${atest}" = "all" ]; then
- [ "$(sed -n -e 's/^.*'"${IFACE}"': *[0-9]* *\([0-9]*\).*/\1/p' \
- /proc/net/wireless)" != "0" ] && return 0
- fi
- fi
-
- sleep 1
- [ ${timeout} -eq 0 ] && continue
- i=$((${i} + 1))
- [ ${i} -ge ${timeout} ] && return 1
- done
- return 1
-}
-
-iwconfig_associate()
-{
- local mode="${1:-managed}" mac="$2" wep_required="$3"
- local freq="$4" chan="$5"
- local w="(WEP Disabled)" key=
-
- iwconfig_set_mode "${mode}"
-
- if [ "${SSID}" = "any" ]; then
- iwconfig "${IFACE}" ap any 2>/dev/null
- unset SSIDVAR
- else
- SSIDVAR=$(shell_var "${SSID}")
- key="$(iwconfig_get_wep_key "${mac}")"
- if [ "${wep_required}" = "on" -a "${key}" = "off" ]; then
- ewarn "WEP key is not set for \"${SSID}\" - not connecting"
- return 1
- fi
- if [ "${wep_required}" = "off" -a "${key}" != "off" ]; then
- key="off"
- ewarn "\"${SSID}\" is not WEP enabled - ignoring setting"
- fi
-
- if ! eval iwconfig "${IFACE}" key "${key}"; then
- if [ "${key}" != "off" ]; then
- ewarn "${IFACE} does not support setting keys"
- ewarn "or the parameter \"mac_key_${SSIDVAR}\" or \"key_${SSIDVAR}\" is incorrect"
- return 1
- fi
- fi
- [ "${key}" != "off" ] && w="$(iwconfig_get_wep_status "${iface}")"
- fi
-
- if ! iwconfig "${IFACE}" essid "${SSID}"; then
- if [ "${SSID}" != "any" ]; then
- ewarn "${IFACE} does not support setting SSID to \"${SSID}\""
- fi
- fi
-
- # Only use channel or frequency
- if [ -n "${chan}" ]; then
- iwconfig "${IFACE}" channel "${chan}"
- elif [ -n "${freq}" ]; then
- iwconfig "${IFACE}" freq "${freq}"
- fi
- [ -n "${mac}" ] && iwconfig "${IFACE}" ap "${mac}"
-
- # Finally apply the user Config
- iwconfig_user_config
-
- ebegin "Connecting to \"${SSID}\" in ${mode} mode ${w}"
-
- if [ "${SSID}" != "any" ] && type preassociate >/dev/null 2>&1; then
- veinfo "Running preassociate function"
- veindent
- ( preassociate )
- local e=$?
- veoutdent
- if [ ${e} -eq 0 ]; then
- veend 1 "preassociate \"${SSID}\" on ${IFACE} failed"
- return 1
- fi
- fi
-
- if ! iwconfig_wait_for_association; then
- eend 1
- return 1
- fi
- eend 0
-
- if [ "${SSID}" = "any" ]; then
- SSID="$(_get_ssid)"
- iwconfig_associate
- return $?
- fi
-
- iwconfig_report
-
- if type postassociate >/dev/null 2>&1; then
- veinfo "Running postassociate function"
- veindent
- ( postassociate )
- veoutdent
- fi
-
- return 0
-}
-
-iwconfig_scan()
-{
- local x= i=0 scan=
- einfo "Scanning for access points"
- eindent
-
- # Sleep if required
- eval x=\$sleep_scan_${IFVAR}
- [ -n "${x}" ] && sleep "${x}"
-
- while [ ${i} -lt 3 ]; do
- local scan="${scan}${scan:+ }$(LC_ALL=C iwlist "${IFACE}" scan 2>/dev/null | sed -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")"
- # If this is the first pass and txpower as off and we have no
- # results then we need to wait for at least 2 seconds whilst
- # the interface does an initial scan.
- if [ "${i}" = "0" -a "${txpowerwasoff}" = "0" ]; then
- case "${scan}" in
- "'${IFACE} "*"No scan results"*)
- sleep 2
- txpowerwasoff=1
- continue
- ;;
- esac
- fi
- i=$((${i} + 1))
- done
-
- if [ -z "${scan}" ]; then
- ewarn "${iface} does not support scanning"
- eoutdent
- eval x=\$adhoc_ssid_${IFVAR}
- [ -n "${x}" ] && return 0
- if [ -n "${preferred_aps}" ]; then
- [ "${associate_order}" = "forcepreferred" ] || \
- [ "${associate_order}" = "forcepreferredonly" ] && return 0
- fi
- eerror "You either need to set a preferred_aps list in /etc/conf.d/wireless"
- eerror " preferred_aps=\"SSID1 SSID2\""
- eerror " and set associate_order_${IFVAR}=\"forcepreferred\""
- eerror " or set associate_order_${IFVAR}=\"forcepreferredonly\""
- eerror "or hardcode the SSID to \"any\" and let the driver find an Access Point"
- eerror " ssid_${IFVAR}=\"any\""
- eerror "or configure defaulting to Ad-Hoc when Managed fails"
- eerror " adhoc_ssid_${IFVAR}=\"WLAN\""
- eerror "or hardcode the SSID against the interface (not recommended)"
- eerror " ssid_${IFVAR}=\"SSID\""
- return 1
- fi
-
- APS=-1
- eval set -- ${scan}
- for line; do
- case "${line}" in
- *Address:*)
- APS=$((${APS} + 1))
- eval MAC_${APS}="\""$(echo "${line#*: }" | tr '[:lower:]' '[:upper:]')"\""
- eval QUALITY_${APS}=0
- ;;
- *ESSID:*)
- x=${line#*\"}
- x=${x%*\"}
- eval SSID_${APS}=\$x
- ;;
- *Mode:*)
- x="$(echo "${line#*:}" | tr '[:upper:]' '[:lower:]')"
- if [ "${x}" = "master" ]; then
- eval MODE_${APS}=managed
- else
- eval MODE_${APS}=\$x
- fi
- ;;
- *'Encryption key:'*)
- x=${line#*:}
- eval ENC_${APS}=\$x
- ;;
- #*Frequency:*)
- # freq[i]="${line#*:}"
- # x="${freq[i]#* }"
- # freq[i]="${freq[i]%% *}${x:0:1}"
- # ;;
- *Channel:*)
- x=${line#*:}
- x=${x%% *}
- eval CHAN_${APS}=\$x
- ;;
- *Quality*)
- x=${line#*:}
- x=${x%/*}
- x="$(echo "${x}" | sed -e 's/[^[:digit:]]//g')"
- x=${x:-0}
- eval QUALITY_${APS}=\$x
- ;;
- esac
- done
-
- if [ -z "${MAC_0}" ]; then
- ewarn "no access points found"
- eoutdent
- return 1
- fi
-
- # Sort based on quality
- local i=0 k=1 a= b= x= t=
- while [ ${i} -lt ${APS} ]; do
- k=$((${i} + 1))
- while [ ${k} -le ${APS} ]; do
- eval a=\$QUALITY_${i}
- [ -z "${a}" ] && break
- eval b=\$QUALITY_${k}
- if [ -n "${b}" -a "${a}" -lt "${b}" ]; then
- for x in MAC SSID CHAN QUALITY ENC; do
- eval t=\$${x}_${i}
- eval ${x}_${i}=\$${x}_${k}
- eval ${x}_${k}=\$t
- done
- fi
- k=$((${k} + 1))
- done
- i=$((${i} + 1))
- done
-
- # Strip any duplicates
- local i=0 k=1 a= b=
- while [ ${i} -lt ${APS} ]; do
- k=$((${i} + 1))
- while [ ${k} -le ${APS} ]; do
- eval a=\$MAC_${i}
- eval b=\$MAC_${k}
- if [ "${a}" = "${b}" ]; then
- eval a=\$QUALITY_${i}
- eval b=\$QUALITY_${k}
- local u=${k}
- # We need to split this into two tests, otherwise bash errors
- [ -n "${a}" -a -n "${b}" ] && [ "${a}" -lt "${b}" ] && u=${i}
- unset MAC_${u} SSID_${u} CHAN_${u} QUALITY_${u} ENC_${u}
- fi
- k=$((${k} + 1))
- done
- i=$((${i} + 1))
- done
-
- local i=0 e= m= s=
-
- while [ ${i} -le ${APS} ]; do
- eval x=\$MAC_${i}
- if [ -z "${x}" ]; then
- i=$((${i} + 1))
- continue
- fi
-
- eval m=\$MODE_${i}
- eval s=\$SSID_${i}
- eval q=\$QUALITY_${i}
- eval e=\$ENC_${i}
- if [ -n "${e}" -a "${e}" != "off" ]; then
- e=", encrypted"
- else
- e=""
- fi
- if [ -z "${s}" ]; then
- einfo "Found ${x}, ${m}${e}"
- else
- einfo "Found \"${s}\" at ${x}, ${m}${e}"
- fi
-
- x="$(echo "${x}" | sed -e 's/://g')"
- eval x=\$mac_ssid_${x}
- if [ -n "${x}" ]; then
- eval SSID_${i}=\$x
- s=${x}
- eindent
- einfo "mapping to \"${x}\""
- eoutdent
- fi
-
- eval set -- $(_flatten_array "blacklist_aps_${IFVAR}")
- [ $# = 0 ] && eval set -- $(_flatten_array "blacklist_aps")
- for x; do
- if [ "${x}" = "${s}" ]; then
- ewarn "${s} has been blacklisted - not connecting"
- unset SSID_${i} MAC_${i} CHAN_${i} QUALITY_${i} ENC_${i}
- fi
- done
- i=$((${i} + 1))
- done
- eoutdent
-}
-
-iwconfig_force_preferred()
-{
- eval set -- $(_flatten_array "preferred_aps_${IFVAR}")
- [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps")
- [ $# = 0 ] && return 1
-
- ewarn "Trying to force preferred in case they are hidden"
- for ssid; do
- local found_AP=false i=0 e=
- while [ ${i} -le ${APS} ]; do
- eval e=\$SSID_${i}
- if [ "${e}" = "${ssid}" ]; then
- found_AP=true
- break
- fi
- i=$((${i} + 1))
- done
- if ! ${found_AP}; then
- SSID=${e}
- iwconfig_associate && return 0
- fi
- done
-
- ewarn "Failed to associate with any preferred access points on ${IFACE}"
- return 1
-}
-
-iwconfig_connect_preferred()
-{
- local ssid= i= mode= mac= enc= freq= chan=
- eval set -- $(_flatten_array "preferred_aps_${IFVAR}")
- [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps")
-
- for ssid; do
- unset IFS
- i=0
- while [ ${i} -le ${APS} ]; do
- eval e=\$SSID_${i}
- if [ "${e}" = "${ssid}" ]; then
- SSID=${e}
- eval mode=\$MODE_${i}
- eval mac=\$MAC_${i}
- eval enc=\$ENC_${i}
- eval freq=\$FREQ_${i}
- eval chan=\$CHAN_${i}
- iwconfig_associate "${mode}" "${mac}" "${enc}" "${freq}" \
- "${chan}" && return 0
- fi
- i=$((${i} + 1))
- done
- done
-
- return 1
-}
-
-iwconfig_connect_not_preferred()
-{
- local ssid= i=0 mode= mac= enc= freq= chan= pref=false
-
- while [ ${i} -le ${APS} ]; do
- eval e=\$SSID_${i}
- if [ -n "${e}" ]; then
- eval set -- $(_flatten_array "preferred_aps_${IFVAR}")
- [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps")
- for ssid; do
- if [ "${e}" = "${ssid}" ]; then
- pref=true
- break
- fi
- done
-
- if ! ${pref}; then
- SSID=${e}
- eval mode=\$MODE_${i}
- eval mac=\$MAC_${i}
- eval enc=\$ENC_${i}
- eval freq=\$FREQ_${i}
- eval chan=\$CHAN_${i}
- iwconfig_associate "${mode}" "${mac}" "${enc}" "${freq}" \
- "${chan}" && return 0
- fi
- fi
- i=$((${i} + 1))
- done
-
- return 1
-}
-
-iwconfig_defaults()
-{
- local x=
- for x in txpower rate rts frag; do
- iwconfig "${IFACE}" "${x}" auto 2>/dev/null
- done
-
- # Release the AP forced
- # Must do ap and then ssid otherwise scanning borks
- iwconfig "${IFACE}" ap off 2>/dev/null
- iwconfig "${IFACE}" essid off 2>/dev/null
-}
-
-iwconfig_configure()
-{
- local x= APS=
- eval SSID=\$ssid_${IFVAR}
-
- # Support old variable
- [ -z "${SSID}" ] && eval SSID=\$essid_${IFVAR}
-
- # Setup ad-hoc mode?
- eval x=\$mode_${IFVAR}
- x=${x:-managed}
- if [ "${x}" = "ad-hoc" -o "${x}" = "master" ]; then
- iwconfig_setup_specific "${x}"
- return $?
- fi
-
- if [ "${x}" != "managed" -a "${x}" != "auto" ]; then
- eerror "Only managed, ad-hoc, master and auto modes are supported"
- return 1
- fi
-
- # Has an SSID been forced?
- if [ -n "${SSID}" ]; then
- iwconfig_set_mode "${x}"
- iwconfig_associate && return 0
- [ "${SSID}" = "any" ] && iwconfig_force_preferred && return 0
-
- eval SSID=\$adhoc_ssid_${IFVAR}
- if [ -n "${SSID}" ]; then
- iwconfig_setup_specific ad-hoc
- return $?
- fi
- return 1
- fi
-
- eval x=\$preferred_aps_${IFVAR}
- [ -n "${x}" ] && preferred_aps=${x}
-
- eval x=\$blacklist_aps_${IFVAR}
- [ -n "${x}" ] && blacklist_aps=${x}
-
- eval x=\$associate_order_${IFVAR}
- [ -n "${x}" ] && associate_order=${x}
- associate_order=${associate_order:-any}
-
- if [ "${associate_order}" = "forcepreferredonly" ]; then
- iwconfig_force_preferred && return 0
- else
- iwconfig_scan || return 1
- iwconfig_connect_preferred && return 0
- [ "${associate_order}" = "forcepreferred" ] || \
- [ "${associate_order}" = "forceany" ] && \
- iwconfig_force_preferred && return 0
- [ "${associate_order}" = "any" ] || \
- [ "${associate_order}" = "forceany" ] && \
- iwconfig_connect_not_preferred && return 0
- fi
-
- e="associate with"
- [ -z "${MAC_0}" ] && e="find"
- [ "${preferred_aps}" = "force" ] || \
- [ "${preferred_aps}" = "forceonly" ] && \
- e="force"
- e="Couldn't ${e} any access points on ${IFACE}"
-
- eval SSID=\$adhoc_ssid_${IFVAR}
- if [ -n "${SSID}" ]; then
- ewarn "${e}"
- iwconfig_setup_specific ad-hoc
- return $?
- fi
-
- eerror "${e}"
- return 1
-}
-
-iwconfig_pre_start()
-{
- # We don't configure wireless if we're being called from
- # the background
- yesno ${IN_BACKGROUND} && return 0
-
- service_set_value "SSID" ""
- _exists || return 0
-
- if ! _is_wireless; then
- veinfo "Wireless extensions not found for ${IFACE}"
- return 0
- fi
-
- # Warn about old file - we want to punt it really
- if [ -e /etc/conf.d/wireless ]; then
- ewarn "/etc/conf.d/wireless is deprecated"
- ewarn "Please put all settings into /etc/conf.d/net"
- . /etc/conf.d/wireless
- fi
-
- # Store the fact that tx-power was off so we default to a longer
- # wait if our scan returns nothing
- LC_ALL=C iwconfig "${IFACE}" | sed -e '1d' | grep -q "Tx-Power=off"
- local txpowerwasoff=$?
-
- iwconfig_defaults
- iwconfig_user_config
-
- # Set the base metric to be 2000
- metric=2000
-
- # Check for rf_kill - only ipw supports this at present, but other
- # cards may in the future.
- if [ -e /sys/class/net/"${IFACE}"/device/rf_kill ]; then
- if [ $(cat /sys/class/net/"${IFACE}"/device/rf_kill) != "0" ]; then
- eerror "Wireless radio has been killed for interface ${IFACE}"
- return 1
- fi
- fi
-
- einfo "Configuring wireless network for ${IFACE}"
-
- # Are we a proper IEEE device?
- # Most devices reutrn IEEE 802.11b/g - but intel cards return IEEE
- # in lower case and RA cards return RAPCI or similar
- # which really sucks :(
- # For the time being, we will test prism54 not loading firmware
- # which reports NOT READY!
- x="$(iwconfig_get_type)"
- if [ "${x}" = "NOT READY!" ]; then
- eerror "Looks like there was a probem loading the firmware for ${IFACE}"
- return 1
- fi
-
- if iwconfig_configure; then
- service_set_value "SSID" "${SSID}"
- return 0
- fi
-
- eerror "Failed to configure wireless for ${IFACE}"
- iwconfig_defaults
- iwconfig "${IFACE}" txpower off 2>/dev/null
- unset SSID SSIDVAR
- _down
- return 1
-}
-
-iwconfig_post_stop()
-{
- yesno ${IN_BACKGROUND} && return 0
- _exists || return 0
- iwconfig_defaults
- iwconfig "${IFACE}" txpower off 2>/dev/null
-}
diff --git a/net.Linux/netplugd.sh b/net.Linux/netplugd.sh
deleted file mode 100644
index eed37aae..00000000
--- a/net.Linux/netplugd.sh
+++ /dev/null
@@ -1,94 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-_config_vars="$_config_vars plug_timeout"
-
-netplugd_depend()
-{
- program start /sbin/netplugd
- after macnet rename
- before interface
- provide plug
-
- # Prefer ifplugd
- before ifplugd
-}
-
-netplugd_pre_start()
-{
- local pidfile="/var/run/netplugd-${IFACE}.pid" timeout=
-
- # We don't start netplug if we're being called from the background
- yesno ${IN_BACKGROUND} && return 0
-
- _exists || return 0
-
- # We need a valid MAC address
- # It's a basic test to ensure it's not a virtual interface
- if ! _get_mac_address >/dev/null 2>&1; then
- vewarn "netplug only works on interfaces with a valid MAC address"
- return 0
- fi
-
- # We don't work on bonded, bridges, tun/tap, vlan or wireless
- for f in bond bridge tuntap vlan wireless; do
- if type "_is_${f}" >/dev/null 2>&1; then
- if _is_${f}; then
- veinfo "netplug does not work with" "${f}"
- return 0
- fi
- fi
- done
-
- ebegin "Starting netplug on" "${IFACE}"
-
- # Mark the us as inactive so netplug can restart us
- mark_service_inactive
-
- # Start netplug
- start-stop-daemon --start --exec /sbin/netplugd \
- --pidfile "${pidfile}" \
- -- -i "${IFACE}" -P -p "${pidfile}" -c /dev/null
- eend "$?" || return 1
-
- eindent
-
- eval timeout=\$plug_timeout_${IFVAR}
- [ -z "${timeout}" ] && timeout=-1
- if [ ${timeout} -eq 0 ]; then
- ewarn "WARNING: infinite timeout set for ${IFACE} to come up"
- elif [ ${timeout} -lt 0 ]; then
- einfo "Backgrounding ..."
- exit 1
- fi
-
- veinfo "Waiting for ${IFACE} to be marked as started"
-
- local i=0
- while true; do
- if service_started; then
- _show_address
- exit 0
- fi
- sleep 1
- [ ${timeout} -eq 0 ] && continue
- i=$((${i} + 1))
- [ ${i} -ge ${timeout} ] && break
- done
-
- eend 1 "Failed to configure ${IFACE} in the background"
- exit 1
-}
-
-netplugd_stop()
-{
- yesno ${IN_BACKGROUND} && return 0
-
- local pidfile="/var/run/netplugd-${IFACE}.pid"
- [ ! -e "${pidfile}" ] && return 0
-
- ebegin "Stopping netplug on" "${IFACE}"
- start-stop-daemon --stop --quiet --exec /sbin/netplugd \
- --pidfile "${pidfile}"
- eend $?
-}
diff --git a/net.Linux/pppd.sh b/net.Linux/pppd.sh
deleted file mode 100644
index abee058d..00000000
--- a/net.Linux/pppd.sh
+++ /dev/null
@@ -1,243 +0,0 @@
-# Copyright 2005-2007 Gentoo Foundation
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-pppd_depend()
-{
- program /usr/sbin/pppd
- after interface
- before dhcp
- provide ppp
-}
-
-is_ppp()
-{
- [ -e /var/run/ppp-"${IFACE}".pid ]
-}
-
-requote()
-{
- printf "'%s' " "$@"
-}
-
-pppd_pre_start()
-{
- # Interface has to be called ppp
- [ "${IFACE%%[0-9]*}" = "ppp" ] || return 0
-
- # Set our base metric
- metric=4000
-
- if yesno ${IN_BACKGROUND}; then
- local config=
- eval config=\$config_${IFVAR}
- # If no config for ppp then don't default to DHCP
- if [ -z "${config}" ]; then
- eval config_${IFVAR}=null
- fi
- return 0
- fi
-
- local link= i= unit="${IFACE#ppp}" opts=
-
- # PPP requires a link to communicate over - normally a serial port
- # PPPoE communicates over Ethernet
- # PPPoA communicates over ATM
- # In all cases, the link needs to be available before we start PPP
- eval link=\$link_${IFVAR}
- [ -n "${link}" ] || return 0
-
- case "${link}" in
- /*)
- if [ ! -e "${link}" ]; then
- eerror "${link} does not exist"
- eerror "Please verify hardware or kernel module (driver)"
- return 1
- fi
- ;;
- esac
-
- if [ -z "${unit}" ]; then
- eerror "PPP requires a unit - use net.ppp[0-9] instead of net.ppp"
- return 1
- fi
-
- # We need to flatten the useless array
- set -- $(_get_array "pppd_${IFVAR}")
- opts="$@"
-
- local mtu= hasmtu=false hasmru=false hasmaxfail=false haspersist=false
- local hasupdetach=false hasdefaultmetric=false
- for i in ${opts}; do
- case "${i}" in
- unit|nodetach|linkname)
- eerror "The option \"${i}\" is not allowed in pppd_${IFVAR}"
- return 1
- ;;
- defaultmetric) hasdefaultmetric=true;;
- mtu) hasmtu=true;;
- mru) hasmru=true;;
- maxfail) hasmaxfail=true;;
- persist) haspersist=true;;
- updetach) hasupdetach=true;;
- esac
- done
-
- # Might be set in conf.d/net
- local username= password= passwordset=
- eval username=\$username_${IFVAR}
- eval password=\$password_${IFVAR}
- eval passwordset=\$\{password_${IFVAR}-x\}
- if [ -n "${username}" ] \
- && [ -n "${password}" -o -z "${passwordset}" ]; then
- opts="${opts} plugin passwordfd.so passwordfd 0"
- fi
-
- if ! ${hasdefaultmetric}; then
- local m=
- eval m=\$metric_${IFVAR}
- [ -z "${m}" ] && m=$((${metric} + $(_ifindex)))
- opts="${opts} defaultmetric ${m}"
- fi
- if [ -n "${mtu}" ]; then
- ${hasmtu} || opts="${opts} mtu ${mtu}"
- ${hasmru} || opts="${opts} mru ${mtu}"
- fi
- ${hasmaxfail} || opts="${opts} maxfail 0"
- ${haspersist} || opts="${opts} persist"
-
- # Set linkname because we need /var/run/ppp-${linkname}.pid
- # This pidfile has the advantage of being there,
- # even if ${IFACE} interface was never started
- opts="linkname ${IFACE} ${opts}"
-
- # Setup auth info
- if [ -n "${username}" ]; then
- opts="user '${username}' remotename ${IFACE} ${opts}"
- fi
-
- # Load a custom interface configuration file if it exists
- [ -f "/etc/ppp/options.${IFACE}" ] \
- && opts="${opts} file '/etc/ppp/options.${IFACE}'"
-
- # Set unit
- opts="unit ${unit} ${opts}"
-
- # Setup connect script
- local chatprog="/usr/sbin/chat -e -E -v" phone=
- eval phone=\$phone_number_${IFVAR}
- set -- ${phone}
- [ -n "$1" ] && chatprog="${chatprog} -T '$1'"
- [ -n "$2" ] && chatprog="${chatprog} -U '$2'"
- # We need to flatten the useless array
- set -- $(_get_array "chat_${IFVAR}")
- if [ $# != 0 ]; then
- opts="${opts} connect '$(echo ${chatprog} $@ | sed -e "s:':'\\\\'':g")'"
- fi
-
- # Add plugins
- local haspppoa=false haspppoe=false plugins="$(_get_array "plugins_${IFVAR}")"
- local IFS="$__IFS"
- for i in ${plugins}; do
- unset IFS
- set -- ${i}
- case "$1" in
- passwordfd) continue;;
- pppoa) shift; set -- "pppoatm" "$@";;
- pppoe) shift; set -- "rp-pppoe" "$@";;
- capi) shift; set -- "capiplugin" "$@";;
- esac
- case "$1" in
- rp-pppoe) haspppoe=true;;
- pppoatm) haspppoa=true;;
- esac
- if [ "$1" = "rp-pppoe" ] || [ "$1" = "pppoatm" -a "${link}" != "/dev/null" ]; then
- opts="${opts} connect true"
- set -- "$@" "${link}"
- fi
- opts="${opts} plugin $1.so"
- shift
- opts="${opts} $@"
- done
- unset IFS
-
- #Specialized stuff. Insert here actions particular to connection type (pppoe,pppoa,capi)
- local insert_link_in_opts=1
- if ${haspppoe}; then
- if [ ! -e /proc/net/pppoe ]; then
- # Load the PPPoE kernel module
- if ! modprobe pppoe; then
- eerror "kernel does not support PPPoE"
- return 1
- fi
- fi
-
- # Ensure that the link exists and is up
- ( IFACE="${link}"; _exists true && _up ) || return 1
- insert_link_in_opts=0
- fi
-
- if ${haspppoa}; then
- if [ ! -d /proc/net/atm ]; then
- # Load the PPPoA kernel module
- if ! modprobe pppoatm; then
- eerror "kernel does not support PPPoATM"
- return 1
- fi
- fi
-
- if [ "${link}" != "/dev/null" ]; then
- insert_link_in_opts=0
- else
- ewarn "WARNING: An [itf.]vpi.vci ATM address was expected in link_${IFVAR}"
- fi
-
- fi
- [ "${insert_link_in_opts}" = "0" ] || opts="${link} ${opts}"
-
- ebegin "Starting pppd in ${IFACE}"
- mark_service_inactive
- if [ -n "${username}" ] \
- && [ -n "${password}" -o -z "${passwordset}" ]; then
- printf "%s" "${password}" | \
- eval start-stop-daemon --start --exec /usr/sbin/pppd \
- --pidfile "/var/run/ppp-${IFACE}.pid" -- "${opts}" >/dev/null
- else
- eval start-stop-daemon --start --exec /usr/sbin/pppd \
- --pidfile "/var/run/ppp-${IFACE}.pid" -- "${opts}" >/dev/null
- fi
-
- if ! eend $? "Failed to start PPP"; then
- mark_service_stopped
- return 1
- fi
-
- if ${hasupdetach}; then
- _show_address
- else
- einfo "Backgrounding ..."
- fi
-
- # pppd will re-call us when we bring the interface up
- exit 0
-}
-
-# Dummy function for users that still have config_ppp0="ppp"
-pppd_start()
-{
- return 0
-}
-
-pppd_stop()
-{
- yesno ${IN_BACKGROUND} && return 0
- local pidfile="/var/run/ppp-${IFACE}.pid"
-
- [ ! -s "${pidfile}" ] && return 0
-
- # Give pppd at least 30 seconds do die, #147490
- einfo "Stopping pppd on ${IFACE}"
- start-stop-daemon --stop --quiet --exec /usr/sbin/pppd \
- --pidfile "${pidfile}" --retry 30
- eend $?
-}
diff --git a/net.Linux/pump.sh b/net.Linux/pump.sh
deleted file mode 100644
index 4ab79293..00000000
--- a/net.Linux/pump.sh
+++ /dev/null
@@ -1,59 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-pump_depend()
-{
- program /sbin/pump
- after interface
- provide dhcp
-}
-
-_config_vars="$_config_vars dhcp pump"
-
-pump_start()
-{
- local args= opt= opts=
-
- # Get our options
- eval opts=\$dhcp_${IFVAR}
- [ -z "${opts}" ] && opts=${dhcp}
-
- # Map some generic options to dhcpcd
- for opt in ${opts}; do
- case "${opt}" in
- nodns) args="${args} --no-dns";;
- nontp) args="${args} --no-ntp";;
- nogateway) args="${args} --no-gateway";;
- esac
- done
-
- # Add our route metric
- [ "${metric:-0}" != "0" ] && args="${args} --route-metric ${metric}"
-
- args="${args} --win-client-ident"
- args="${args} --keep-up --interface ${IFACE}"
-
- ebegin "Running pump"
- eval pump "${args}"
- eend $? || return 1
-
- _show_address
- return 0
-}
-
-pump_stop()
-{
- # We check for a pump process first as querying for status
- # causes pump to spawn a process
- start-stop-daemon --quiet --test --stop --exec /sbin/pump || return 0
-
- # Check that pump is running on the interface
- if ! pump --status --interface "${IFACE}" >/dev/null 2>&1; then
- return 0
- fi
-
- # Pump always releases the lease
- ebegin "Stopping pump on ${IFACE}"
- pump --release --interface "${IFACE}"
- eend $? "Failed to stop pump"
-}
diff --git a/net.Linux/tuntap.sh b/net.Linux/tuntap.sh
deleted file mode 100644
index 3174d812..00000000
--- a/net.Linux/tuntap.sh
+++ /dev/null
@@ -1,83 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-tuntap_depend()
-{
- before bridge interface macchanger
-}
-
-_config_vars="$_config_vars tunctl"
-
-_is_tuntap()
-{
- [ -n "$(export RC_SVCNAME="net.${IFACE}"; service_get_value tuntap)" ]
-}
-
-tuntap_pre_start()
-{
- local tuntap=
- eval tuntap=\$tuntap_${IFVAR}
-
- [ -z "${tuntap}" ] && return 0
-
- if [ ! -e /dev/net/tun ]; then
- if ! modprobe tun; then
- eerror "TUN/TAP support is not present in this kernel"
- return 1
- fi
- vebegin "Waiting for /dev/net/tun"
- # /dev/net/tun can take it's time to appear
- local timeout=10
- while [ ! -e /dev/net/tun -a ${timeout} -gt 0 ]; do
- sleep 1
- timeout=$((${timeout} - 1))
- done
- if [ ! -e /dev/net/tun ]; then
- eerror "TUN/TAP support present but /dev/net/tun is not"
- return 1
- fi
- veend 0
- fi
-
- ebegin "Creating Tun/Tap interface ${IFACE}"
-
- # Set the base metric to 1000
- metric=1000
-
- local o_opts= t_opts= do_openvpn=false do_tunctl=false
- eval o_opts=\$openvpn_${IFVAR}
- eval t_opts=\$tunctl_${IFVAR}
-
- if [ -n "${o_opts}" ] && type openvpn >/dev/null 2>&1; then
- do_openvpn=true
- elif [ -n "${t_opts}" ] && type tunctl >/dev/null 2>&1; then
- do_tunctl=true
- elif type openvpn >/dev/null 2>&1; then
- do_openvpn=true
- else
- do_tunctl=true
- fi
-
- if ${do_openvpn}; then
- openvpn --mktun --dev-type "${tuntap}" --dev "${IFACE}" \
- ${o_opts} >/dev/null
- else
- tunctl ${t_opts} -t "${IFACE}" >/dev/null
- fi
- eend $? && _up && service_set_value tuntap "${tuntap}"
-}
-
-tuntap_post_stop()
-{
- _is_tuntap || return 0
-
- ebegin "Destroying Tun/Tap interface ${IFACE}"
- if type tunctl >/dev/null 2>&1; then
- tunctl -d "${IFACE}" >/dev/null
- else
- openvpn --rmtun \
- --dev-type "$(service_get_value tuntap)" \
- --dev "${IFACE}" >/dev/null
- fi
- eend $?
-}
diff --git a/net.Linux/udhcpc.sh b/net.Linux/udhcpc.sh
deleted file mode 100644
index 462f0588..00000000
--- a/net.Linux/udhcpc.sh
+++ /dev/null
@@ -1,105 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-udhcpc_depend()
-{
- program start /sbin/udhcpc
- after interface
- provide dhcp
-}
-
-_config_vars="$_config_vars dhcp udhcpc"
-
-# WARNING:- The relies heavily on Gentoo patches and scripts for udhcpc
-udhcpc_start()
-{
- local args= opt= opts= pidfile="/var/run/udhcpc-${IFACE}.pid"
- local sendhost=true cachefile="/var/cache/udhcpc-${IFACE}.lease"
-
- eval args=\$udhcpc_${IFVAR}
-
- # Get our options
- eval opts=\$dhcp_${IFVAR}
- [ -z "${opts}" ] && opts=${dhcp}
-
- # Map some generic options to dhcpcd
- for opt in ${opts}; do
- case "${opt}" in
- nodns) args="${args} --env PEER_DNS=no";;
- nontp) args="${args} --env PEER_NTP=no";;
- nogateway) args="${args} --env PEER_ROUTERS=no";;
- nosendhost) sendhost=false;
- esac
- done
-
- [ "${metric:-0}" != "0" ] && args="${args} --env IF_METRIC=${metric}"
-
- ebegin "Running udhcpc"
-
- # Try and load the cache if it exists
- if [ -f "${cachefile}" ]; then
- case "$ {args} " in
- *" --request="*|*" -r "*);;
- *)
- local x=$(cat "${cachefile}")
- # Check for a valid ip
- case "${x}" in
- *.*.*.*) args="${args} --request=${x}";;
- esac
- ;;
- esac
- fi
-
- case " ${args} " in
- *" --quit "*|*" -q "*) x="/sbin/udhcpc";;
- *) x="start-stop-daemon --start --exec /sbin/udhcpc \
- --pidfile \"${pidfile}\" --";;
- esac
-
- case " ${args} " in
- *" --hosname="*|*" -h "*|*" -H "*);;
- *)
- if ${sendhost}; then
- local hname="$(hostname)"
- if [ "${hname}" != "(none)" ] && [ "${hname}" != "localhost" ]; then
- args="${args} --hostname='${hname}'"
- fi
- fi
- ;;
- esac
-
- local script="${RC_LIBDIR}"/sh/udhcpc.sh
- [ -x "${script}" ] || script=/lib/rcscripts/sh/udhcpc.sh
-
- eval "${x}" "${args}" --interface="${IFACE}" --now \
- --script="${script}" \
- --pidfile="${pidfile}" >/dev/null
- eend $? || return 1
-
- _show_address
- return 0
-}
-
-udhcpc_stop()
-{
- local pidfile="/var/run/udhcpc-${IFACE}.pid" opts=
- [ ! -f "${pidfile}" ] && return 0
-
- # Get our options
- eval opts=\$dhcp_${IFVAR}
- [ -z "${opts}" ] && opts=${dhcp}
-
- ebegin "Stopping udhcpc on ${IFACE}"
- case " ${opts} " in
- *" release "*)
- start-stop-daemon --stop --quiet --oknodo --signal USR2 \
- --exec /sbin/udhcpc --pidfile "${pidfile}"
- if [ -f /var/cache/udhcpc-"${IFACE}".lease ]; then
- rm -f /var/cache/udhcpc-"${IFACE}".lease
- fi
- ;;
- esac
-
- start-stop-daemon --stop --exec /sbin/udhcpc --pidfile "${pidfile}"
- eend $?
-}
diff --git a/net.Linux/vlan.sh b/net.Linux/vlan.sh
deleted file mode 100644
index 7d77aae8..00000000
--- a/net.Linux/vlan.sh
+++ /dev/null
@@ -1,118 +0,0 @@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-vlan_depend()
-{
- program /sbin/vconfig
- after interface
- before dhcp
-}
-
-_config_vars="$_config_vars vlans"
-
-_is_vlan()
-{
- [ ! -d /proc/net/vlan ] && return 1
- [ -e /proc/net/vlan/"${IFACE}" ] && return 0
- grep -Eq "^${IFACE}[[:space:]]+" /proc/net/vlan/config
-}
-
-_get_vlans()
-{
- [ -e /proc/net/vlan/config ] || return 1
- sed -n -e 's/^\(.*[0-9]\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
-}
-
-_check_vlan()
-{
- if [ ! -d /proc/net/vlan ]; then
- modprobe 8021q
- if [ ! -d /proc/net/vlan ]; then
- eerror "VLAN (802.1q) support is not present in this kernel"
- return 1
- fi
- fi
-}
-
-vlan_pre_start()
-{
- local vc="$(_get_array "vconfig_${IFVAR}")"
- [ -z "${vc}" ] && return 0
-
- _check_vlan || return 1
- _exists || return 1
-
- local v= x= e=
- local IFS="$__IFS"
- for v in ${vc}; do
- unset IFS
- case "${v}" in
- set_name_type" "*) x=${v};;
- *)
- set -- ${v}
- x="$1 ${IFACE}"
- shift
- x="${x} $@"
- ;;
- esac
-
- e="$(vconfig ${x} 2>&1 1>/dev/null)"
- [ -z "${e}" ] && continue
- eerror "${e}"
- return 1
- done
-}
-
-vlan_post_start()
-{
- local vlans=
- eval vlans=\$vlans_${IFACE}
- [ -z "${vlans}" ] && return 0
-
- _check_vlan || return 1
- _exists || return 1
-
- local vlan= e= s=
- for vlan in ${vlans}; do
- einfo "Adding VLAN ${vlan} to ${IFACE}"
- e="$(vconfig add "${IFACE}" "${vlan}" 2>&1 1>/dev/null)"
- if [ -n "${e}" ]; then
- eend 1 "${e}"
- continue
- fi
-
- # We may not want to start the vlan ourselves
- eval s=\$vlan_start_${IFVAR}
- yesno ${s:-yes} || continue
-
- # We need to work out the interface name of our new vlan id
- local ifname="$( \
- sed -n -e 's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${iface}"'$/\1/p' \
- /proc/net/vlan/config )"
- mark_service_started "net.${ifname}"
- (
- export RC_SVCNAME="net.${ifname}"
- start
- ) || mark_service_stopped "net.${ifname}"
- done
-
- return 0
-}
-
-vlan_post_stop()
-{
- local vlan=
-
- for vlan in $(_get_vlans); do
- einfo "Removing VLAN ${vlan##*.} from ${IFACE}"
- (
- export RC_SVCNAME="net.${vlan}"
- stop
- ) && {
- mark_service_stopped "net.${vlan}"
- vconfig rem "${vlan}" >/dev/null
- }
- done
-
- return 0
-}
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-29 04:42:23 +0000