diff options
Diffstat (limited to 'etc.FreeBSD/devd.conf')
| -rw-r--r-- | etc.FreeBSD/devd.conf | 315 |
1 files changed, 0 insertions, 315 deletions
diff --git a/etc.FreeBSD/devd.conf b/etc.FreeBSD/devd.conf deleted file mode 100644 index 3cd262cf..00000000 --- a/etc.FreeBSD/devd.conf +++ /dev/null @@ -1,315 +0,0 @@ -# $FreeBSD: src/etc/devd.conf,v 1.38 2007/06/21 22:50:36 njl Exp $ -# -# Refer to devd.conf(5) and devd(8) man pages for the details on how to -# run and configure devd. -# - -# NB: All regular expressions have an implicit ^$ around them. -# NB: device-name is shorthand for 'match device-name' - -options { - # Each directory directive adds a directory the list of directories - # that we scan for files. Files are read-in in the order that they - # are returned from readdir(3). The rule-sets are combined to - # create a DFA that's used to match events to actions. - directory "/etc/devd"; - directory "/usr/local/etc/devd"; - pid-file "/var/run/devd.pid"; - - # Setup some shorthand for regex that we use later in the file. - #XXX Yes, these are gross -- imp - set scsi-controller-regex - "(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\ - esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\ - [0-9]+"; -}; - -# Note that the attach/detach with the highest value wins, so that one can -# override these general rules. - -# -# Configure the interface on attach. Due to a historical accident, this -# script is called pccard_ether. -# -notify 0 { - match "system" "IFNET"; - match "type" "ATTACH"; - action "/etc/rc.devd net.$subsystem start"; -}; - -notify 0 { - match "system" "IFNET"; - match "type" "DETACH"; - action "/etc/rc.devd net.$subsystem stop"; -}; - -# -# Try to configure the interface when the network comes up and deconfigure -# when it goes down -# -notify 0 { - match "system" "IFNET"; - match "type" "LINK_UP"; - media-type "ethernet"; - action "/etc/rc.devd net.$subsystem start"; -}; - -notify 0 { - match "system" "IFNET"; - match "type" "LINK_DOWN"; - media-type "ethernet"; - action "/etc/rc.devd net.$subsystem stop"; -}; -# -# Like Ethernet devices, but separate because -# they have a different media type. We may want -# to exploit this later. -# -detach 0 { - media-type "802.11"; - action "/etc/rc.devd net.$device-name stop"; -}; -attach 0 { - media-type "802.11"; - action "/etc/rc.devd net.$device-name start"; -}; -notify 0 { - match "system" "IFNET"; - match "type" "LINK_UP"; - media-type "802.11"; - action "/etc/rc.devd net.$subsystem start"; -}; -notify 0 { - match "system" "IFNET"; - match "type" "LINK_DOWN"; - media-type "802.11"; - action "/etc/rc.devd net.$subsystem stop"; -}; - -# An entry like this might be in a different file, but is included here -# as an example of how to override things. Normally 'ed50' would match -# the above attach/detach stuff, but the value of 100 makes it -# hard wired to 1.2.3.4. -attach 100 { - device-name "ed50"; - action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000"; -}; -detach 100 { - device-name "ed50"; -}; - -# When a USB Bluetooth dongle appears activate it -attach 100 { - device-name "ubt[0-9]+"; - action "/etc/rc.d/bluetooth start $device-name"; -}; -detach 100 { - device-name "ubt[0-9]+"; - action "/etc/rc.d/bluetooth stop $device-name"; -}; - -# When a USB keyboard arrives, attach it as the console keyboard. -attach 100 { - device-name "ukbd0"; - action "/etc/rc.d/syscons setkeyboard /dev/ukbd0"; -}; -detach 100 { - device-name "ukbd0"; - action "/etc/rc.d/syscons setkeyboard /dev/kbd0"; -}; - -# The entry below starts moused when a mouse is plugged in. Moused -# stops automatically (actually it bombs :) when the device disappears. -attach 100 { - device-name "ums[0-9]+"; - action "/etc/rc.devd moused.$device-name start"; -}; - -# Firmware download into the ActiveWire board. After the firmware download is -# done the device detaches and reappears as something new and shiny -# automatically. -attach 100 { - match "vendor" "0x0854"; - match "product" "0x0100"; - match "release" "0x0000"; - action "/usr/local/bin/ezdownload -f /usr/local/share/usb/firmware/0854.0100.0_01.hex $device-name"; -}; - -# Firmware download for Entrega Serial DB25 adapter. -attach 100 { - match "vendor" "0x1645"; - match "product" "0x8001"; - match "release" "0x0101"; - action "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio; fi /usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 /dev/$device-name"; -}; - -# This entry starts the ColdSync tool in daemon mode. Make sure you have an up -# to date /usr/local/etc/palms. We override the 'listen' settings for port and -# type in /usr/local/etc/coldsync.conf. -attach 100 { - device-name "ugen[0-9]+"; - match "vendor" "0x082d"; - match "product" "0x0100"; - match "release" "0x0100"; - action "/usr/local/bin/coldsync -md -p /dev/$device-name -t usb"; -}; - -# -# Rescan scsi device-names on attach, but not detach. However, it is -# disabled by default due to reports of problems. -# -attach 0 { - device-name "$scsi-controller-regex"; -// action "camcontrol rescan all"; -}; - -# Don't even try to second guess what to do about drivers that don't -# match here. Instead, pass it off to syslog. Commented out for the -# moment, as the pnpinfo variable isn't set in devd yet. Individual -# variables within the bus supplied pnpinfo are set. -nomatch 0 { -# action "logger Unknown device: $pnpinfo $location $bus"; -}; - -# Various logging of unknown devices. -nomatch 10 { - match "bus" "uhub[0-9]+"; - action "logger Unknown USB device: vendor $vendor product $product \ - bus $bus"; -}; - -# Some PC-CARDs don't offer numerical manufacturer/product IDs, just -# show the CIS info there. -nomatch 20 { - match "bus" "pccard[0-9]+"; - match "manufacturer" "0xffffffff"; - match "product" "0xffffffff"; - action "logger Unknown PCCARD device: CISproduct $cisproduct \ - CIS-vendor $cisvendor bus $bus"; -}; - -nomatch 10 { - match "bus" "pccard[0-9]+"; - action "logger Unknown PCCARD device: manufacturer $manufacturer \ - product $product CISproduct $cisproduct CIS-vendor \ - $cisvendor bus $bus"; -}; - -nomatch 10 { - match "bus" "cardbus[0-9]+"; - action "logger Unknown Cardbus device: device $device class $class \ - vendor $vendor bus $bus"; -}; - -# Switch power profiles when the AC line state changes. -notify 10 { - match "system" "ACPI"; - match "subsystem" "ACAD"; - action "/etc/rc.d/power_profile $notify"; -}; - -# Notify all users before beginning emergency shutdown when we get -# a _CRT or _HOT thermal event and we're going to power down the system -# very soon. -notify 10 { - match "system" "ACPI"; - match "subsystem" "Thermal"; - match "notify" "0xcc"; - action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'"; -}; - -# Sample ZFS problem reports handling. -notify 10 { - match "system" "ZFS"; - match "type" "zpool"; - action "logger -p kern.err 'ZFS: failed to load zpool $pool'"; -}; - -notify 10 { - match "system" "ZFS"; - match "type" "vdev"; - action "logger -p kern.err 'ZFS: vdev failure, zpool=$pool type=$type'"; -}; - -notify 10 { - match "system" "ZFS"; - match "type" "data"; - action "logger -p kern.warn 'ZFS: zpool I/O failure, zpool=$pool error=$zio_err'"; -}; - -notify 10 { - match "system" "ZFS"; - match "type" "io"; - action "logger -p kern.warn 'ZFS: vdev I/O failure, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size error=$zio_err'"; -}; - -notify 10 { - match "system" "ZFS"; - match "type" "checksum"; - action "logger -p kern.warn 'ZFS: checksum mismatch, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size'"; -}; - -# User requested suspend, so perform preparation steps and then execute -# the actual suspend process. -notify 10 { - match "system" "ACPI"; - match "subsystem" "Suspend"; - action "/etc/rc.suspend acpi $notify"; -}; -notify 10 { - match "system" "ACPI"; - match "subsystem" "Resume"; - action "/etc/rc.resume acpi $notify"; -}; - -/* EXAMPLES TO END OF FILE - -# The following might be an example of something that a vendor might -# install if you were to add their device. This might reside in -# /usr/local/etc/devd/deqna.conf. A deqna is, in this hypothetical -# example, a pccard ethernet-like device. Students of history may -# know other devices by this name, and will get the in-jokes in this -# entry. -nomatch 10 { - match "bus" "pccard[0-9]+"; - match "manufacturer" "0x1234"; - match "product" "0x2323"; - action "kldload if_deqna"; -}; -attach 10 { - device-name "deqna[0-9]+"; - action "/etc/pccard_ether $device-name start"; -}; -detach 10 { - device-name "deqna[0-9]+"; - action "/etc/pccard_ether $device-name stop"; -}; - -# Examples of notify hooks. A notify is a generic way for a kernel -# subsystem to send event notification to userland. -# -# Here are some examples of ACPI notify handlers. ACPI subsystems that -# generate notifies include the AC adapter, power/sleep buttons, -# control method batteries, lid switch, and thermal zones. -# -# Information returned is not always the same as the ACPI notify -# events. See the ACPI specification for more information about -# notifies. Here is the information returned for each subsystem: -# -# ACAD: AC line state (0 is offline, 1 is online) -# Button: Button pressed (0 for power, 1 for sleep) -# CMBAT: ACPI battery events -# Lid: Lid state (0 is closed, 1 is open) -# Suspend, Resume: Suspend and resume notification -# Thermal: ACPI thermal zone events -# -# This example calls a script when the AC state changes, passing the -# notify value as the first argument. If the state is 0x00, it might -# call some sysctls to implement economy mode. If 0x01, it might set -# the mode to performance. -notify 10 { - match "system" "ACPI"; - match "subsystem" "ACAD"; - action "/etc/acpi_ac $notify"; -}; -*/ |