diff options
68 files changed, 613 insertions, 608 deletions
diff --git a/conf.d.Linux/net.example b/conf.d.Linux/net.example index be5e020c..74bdbfdc 100644 --- a/conf.d.Linux/net.example +++ b/conf.d.Linux/net.example @@ -974,7 +974,7 @@ # # # Test to see if we're docked or not and configure like so # # config_docked="dhcp" -# if grep -q "1" /sys/devices/platform/dock.0/docked ; then +# if grep -q "1" /sys/devices/platform/dock.0/docked; then # einfo "${IFACE} is docked - configuring" # _configure_variables "docked" # fi @@ -1009,15 +1009,15 @@ # # 'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \ # #" # eval set -- $\rules_${IFVAR} -# if [ $# != 0 ] ; then +# if [ $# != 0 ]; then # einfo "Adding IP policy routing rules" # eindent # # Ensure that the kernel supports policy routing -# if ! ip rule list | grep -q "^" ; then +# if ! ip rule list | grep -q "^"; then # eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)" # eerror "in your kernel to use ip rules" # else -# for x in "$@" ; do +# for x in "$@"; do # ebegin "${x}" # ip rule add ${x} dev "${IFACE}" # eend $? @@ -1037,11 +1037,11 @@ # [ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g # Automatically erase any ip rules created in the example postup above -# if interface_exists "${IFACE}" ; then +# if interface_exists "${IFACE}"; then # # Remove any rules for this interface # local rule # ip rule list | grep " iif ${IFACE}[ ]*" | { -# while read rule ; do +# while read rule; do # rule="${rule#*:}" # ip rule del ${rule} # done @@ -41,9 +41,9 @@ install:: $(_SUBDIR) install:: $(BIN) $(CONF) $(CONF_APPEND) - if test -n "$(DIR)" ; then $(INSTALL) -d $(DESTDIR)$(DIR) || exit $$?; fi - if test -n "$(BIN)" ; then $(INSTALL) $(BIN) $(DESTDIR)$(DIR) || exit $$?; fi - if test -n "$(INC)" ; then $(INSTALL) -m 0644 $(INC) $(DESTDIR)$(DIR) || exit $$?; fi + if test -n "$(DIR)"; then $(INSTALL) -d $(DESTDIR)$(DIR) || exit $$?; fi + if test -n "$(BIN)"; then $(INSTALL) $(BIN) $(DESTDIR)$(DIR) || exit $$?; fi + if test -n "$(INC)"; then $(INSTALL) -m 0644 $(INC) $(DESTDIR)$(DIR) || exit $$?; fi for x in $(CONF); do \ if ! test -e $(DESTDIR)$(DIR)/$$x; then \ $(INSTALL) -m 0644 $$x $(DESTDIR)$(DIR) || exit $$?; \ diff --git a/init.d.BSD/clock b/init.d.BSD/clock index 3bb51b77..d6dc8b5c 100755 --- a/init.d.BSD/clock +++ b/init.d.BSD/clock @@ -69,7 +69,7 @@ stop() { fi ebegin "Stopping the System Clock Adjuster" - if start-stop-daemon --test --quiet --stop --exec /sbin/adjkerntz ; then + if start-stop-daemon --test --quiet --stop --exec /sbin/adjkerntz; then start-stop-daemon --stop --exec /sbin/adjkerntz eend $? else diff --git a/init.d.BSD/dumpon b/init.d.BSD/dumpon index 1faf23b1..64876ab1 100755 --- a/init.d.BSD/dumpon +++ b/init.d.BSD/dumpon @@ -33,7 +33,7 @@ depend() { start() { # Setup any user requested dump device - if [ -n "${dump_device}" ] ; then + if [ -n "${dump_device}" ]; then ebegin "Activating kernel core dump device (${dump_device})" dumpon ${dump_device} eend $? diff --git a/init.d.BSD/ipfw b/init.d.BSD/ipfw index cdddfaeb..9dca799b 100644 --- a/init.d.BSD/ipfw +++ b/init.d.BSD/ipfw @@ -42,8 +42,8 @@ ipfw() { init() { # Load the kernel module - if ! sysctl net.inet.ip.fw.enable=1 >/dev/null 2>/dev/null; then - if ! kldload ipfw ; then + if ! sysctl net.inet.ip.fw.enable=1 >/dev/null 2>&1; then + if ! kldload ipfw; then eend 1 "Unable to load firewall module" return 1 fi @@ -68,7 +68,7 @@ init() { start() { local i= p= log= ebegin "Starting firewall rules" - if ! init ; then + if ! init; then eend 1 "Failed to flush firewall ruleset" return 1 fi @@ -157,7 +157,7 @@ stop() { panic() { ebegin "Stopping firewall rules - hard" - if ! init ; then + if ! init; then eend 1 "Failed to flush firewall ruleset" return 1 fi diff --git a/init.d.BSD/moused b/init.d.BSD/moused index 4610f20b..9534082b 100644 --- a/init.d.BSD/moused +++ b/init.d.BSD/moused @@ -24,7 +24,7 @@ # SUCH DAMAGE. mouse=${SVCNAME##*.} -if [ -n "${name}" -a "${mouse}" != "moused" ] ; then +if [ -n "${name}" -a "${mouse}" != "moused" ]; then moused_device=/dev/"${mouse}" pidfile=/var/run/moused-"${mouse}".pid else @@ -41,9 +41,9 @@ depend() { start() { ebegin "Starting ${name}" - if [ -z "${moused_device}" ] ; then + if [ -z "${moused_device}" ]; then local dev= - for dev in /dev/psm[0-9]* /dev/ums[0-9]* ; do + for dev in /dev/psm[0-9]* /dev/ums[0-9]*; do [ -c "${dev}" ] || continue [ -e /var/run/moused-"${dev##*/}".pid ] && continue moused_device=${dev} @@ -54,7 +54,7 @@ start() { done fi - if [ -z "${moused_device}" ] ; then + if [ -z "${moused_device}" ]; then eend 1 "No mouse device found" return 1 fi diff --git a/init.d.BSD/savecore b/init.d.BSD/savecore index 8d8577f9..053828ec 100755 --- a/init.d.BSD/savecore +++ b/init.d.BSD/savecore @@ -38,7 +38,7 @@ start() { chmod 700 "${dump_dir}" fi - if [ "${RC_UNAME}" = "FreeBSD" ] ; then + if [ "${RC_UNAME}" = "FreeBSD" ]; then # Don't quote ${dump_device}, so that if it's unset, # savecore will check on the partitions listed in fstab # without errors in the output diff --git a/init.d.BSD/syscons b/init.d.BSD/syscons index ae174f3b..c04ccff1 100644 --- a/init.d.BSD/syscons +++ b/init.d.BSD/syscons @@ -52,7 +52,7 @@ start() { ebegin "Changing function keys" eval set -- "${keychange}" eindent - while [ $# -gt 0 ] ; do + while [ $# -gt 0 ]; do veinfo "F$1 -> \`$2'" kbdcontrol -f "$1" "$2" </dev/console veend $? diff --git a/init.d.BSD/sysctl b/init.d.BSD/sysctl index 644b25a2..6507a09e 100644 --- a/init.d.BSD/sysctl +++ b/init.d.BSD/sysctl @@ -34,7 +34,7 @@ start() { ebegin "Configuring kernel parameters" local retval=0 var= comments= - while read var comments ; do + while read var comments; do case "${var}" in ""|"#"*) continue;; esac diff --git a/init.d.Linux/clock b/init.d.Linux/clock index 2af6baff..b8b17a97 100755 --- a/init.d.Linux/clock +++ b/init.d.Linux/clock @@ -54,9 +54,9 @@ setupopts() { TBLURB="s390" ;; *) - if [ -e /proc/devices ] && grep -q " cobd$" /proc/devices ; then + if [ -e /proc/devices ] && grep -q " cobd$" /proc/devices; then TBLURB="coLinux" - elif [ "${CLOCK}" = "UTC" ] ; then + elif [ "${CLOCK}" = "UTC" ]; then utc="--utc" TBLURB="UTC" else @@ -77,7 +77,7 @@ start() { ebegin "Setting system clock using the hardware clock [${TBLURB}]" if [ -n "${utc}" ]; then - if [ -e /proc/modules -a ! -e /dev/rtc ] ; then + if [ -e /proc/modules -a ! -e /dev/rtc ]; then modprobe -q rtc || modprobe -q genrtc fi @@ -120,7 +120,7 @@ stop() { fi errstr="$(LC_ALL=C hwclock --systohc ${utc} ${clock_args} 2>&1 >/dev/null)" fi - if [ -n "${errstr}" ] ; then + if [ -n "${errstr}" ]; then ewarn "${errstr}" retval=1 fi diff --git a/init.d.Linux/consolefont b/init.d.Linux/consolefont index 0fe7f98e..1176584b 100755 --- a/init.d.Linux/consolefont +++ b/init.d.Linux/consolefont @@ -70,7 +70,7 @@ start() { # Set the console font local errmsg= ebegin "Setting user font" - if [ -x /bin/setfont ] ; then + if [ -x /bin/setfont ]; then # We patched setfont to have --tty support ... if [ -n "$(setfont --help 2>&1 | grep -e '--tty')" ] || \ [ -n "$(setfont --help 2>&1 | grep -e '-C')" ] @@ -110,7 +110,7 @@ start() { for font in /usr/share/consolefonts/"${consolefont}".*; do :; done cp "${font}" "${RC_LIBDIR}"/console echo "$(basename "${font}")" > "${RC_LIBDIR}"/console/font - if yesno ${unicode:-${UNICODE}} ; then + if yesno ${unicode:-${UNICODE}}; then printf "" > "${RC_LIBDIR}"/console/unicode else rm -f "${RC_LIBDIR}"/console/unicode diff --git a/init.d.Linux/keymaps b/init.d.Linux/keymaps index 5f642742..2960fee7 100755 --- a/init.d.Linux/keymaps +++ b/init.d.Linux/keymaps @@ -47,7 +47,7 @@ start() { ;; esac - if [ -z "${keymap}" ] ; then + if [ -z "${keymap}" ]; then eerror "You need to setup keymap in /etc/conf.d/keymaps first" return 1 fi @@ -59,7 +59,7 @@ start() { || ttydev=/dev/tty # Force linux keycodes for PPC. - if [ -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes ] ; then + if [ -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes ]; then echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes fi @@ -74,7 +74,7 @@ start() { fi ebegin "Loading key mappings" - if [ -x /bin/loadkeys ] ; then + if [ -x /bin/loadkeys ]; then yesno ${windowskeys} && wkeys="windowkeys" loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} eend $? "Error loading key mappings" diff --git a/init.d.Linux/modules b/init.d.Linux/modules index e6590ca6..d2f25b67 100755 --- a/init.d.Linux/modules +++ b/init.d.Linux/modules @@ -45,7 +45,7 @@ load_modules() { eindent local x= cnt=0 - for x in "$@" ; do + for x in "$@"; do set -- ${x} ebegin "Loading module $1" eval modprobe -q "$@" @@ -92,16 +92,16 @@ start() { auto=/etc/modules.autoload else local x= f="/etc/modules.autoload.d/kernel" - for x in "${KV}" ${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} ${KV_MAJOR}.${KV_MINOR} ; do - if [ -f "${f}-${x}.${RC_SOFTLEVEL}" ] ; then + for x in "${KV}" ${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} ${KV_MAJOR}.${KV_MINOR}; do + if [ -f "${f}-${x}.${RC_SOFTLEVEL}" ]; then auto="${f}-${x}.${RC_SOFTLEVEL}" break fi - if [ "${RC_SOFTLEVEL}" = "${RC_BOOTLEVEL}" -a -f "${f}-${x}.${RC_DEFAULTLEVEL}" ] ; then + if [ "${RC_SOFTLEVEL}" = "${RC_BOOTLEVEL}" -a -f "${f}-${x}.${RC_DEFAULTLEVEL}" ]; then auto="${f}-${x}.${RC_DEFAULTLEVEL}" break fi - if [ -f "${f}-${x}" ] ; then + if [ -f "${f}-${x}" ]; then auto="${f}-${x}" break fi diff --git a/init.d.Linux/numlock b/init.d.Linux/numlock index 5b2bca99..672839b1 100755 --- a/init.d.Linux/numlock +++ b/init.d.Linux/numlock @@ -38,7 +38,7 @@ _setleds() { local dev=/dev/tty t= i=1 retval=0 [ -d /dev/vc ] && dev=/dev/vc/ - while [ ${i} -le ${ttyn} ] ; do + while [ ${i} -le ${ttyn} ]; do setleds -D "$1"num < ${dev}${i} || retval=1 i=$((${i} + 1)) done diff --git a/init.d.Linux/procfs b/init.d.Linux/procfs index 95190bbd..4a3778a3 100644 --- a/init.d.Linux/procfs +++ b/init.d.Linux/procfs @@ -44,7 +44,7 @@ start() { if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then local usbfs=$(grep -Fow usbfs /proc/filesystems || grep -Fow usbdevfs /proc/filesystems) - if [ -n "${usbfs}" ] ; then + if [ -n "${usbfs}" ]; then ebegin "Mounting USB device filesystem (${usbfs})" local usbgid="$(getent group usb | \ sed -e 's/.*:.*:\(.*\):.*/\1/')" @@ -56,8 +56,8 @@ start() { fi # Setup Kernel Support for the NFS daemon status - if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd ; then - if grep -qs nfsd /proc/filesystems ; then + if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd; then + if grep -qs nfsd /proc/filesystems; then ebegin "Mounting nfsd filesystem" mount -t nfsd -o nodev,noexec,nosuid \ nfsd /proc/fs/nfsd @@ -66,8 +66,8 @@ start() { fi # Setup Kernel Support for miscellaneous Binary Formats - if [ -d /proc/sys/fs/binfmt_misc ] && ! mountinfo -q /proc/sys/fs/binfmt_misc ; then - if grep -qs binfmt_misc /proc/filesystems ; then + if [ -d /proc/sys/fs/binfmt_misc ] && ! mountinfo -q /proc/sys/fs/binfmt_misc; then + if grep -qs binfmt_misc /proc/filesystems; then ebegin "Mounting misc binary format filesystem" mount -t binfmt_misc -o nodev,noexec,nosuid \ binfmt_misc /proc/sys/fs/binfmt_misc @@ -76,8 +76,8 @@ start() { fi # Setup Kernel Support for securityfs - if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security ; then - if grep -qs securityfs /proc/filesystems ; then + if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security; then + if grep -qs securityfs /proc/filesystems; then ebegin "Mounting security filesystem" mount -t securityfs securityfs /sys/kernel/security \ -o nodev,noexec,nosuid @@ -86,8 +86,8 @@ start() { fi # Setup Kernel Support for debugfs - if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug ; then - if grep -qs debugfs /proc/filesystems ; then + if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug; then + if grep -qs debugfs /proc/filesystems; then ebegin "Mounting debug filesystem" mount -t debugfs debugfs /sys/kernel/debug \ -o nodev,noexec,nosuid @@ -96,8 +96,8 @@ start() { fi # Setup Kernel Support for SELinux - if [ -d /selinux ] && ! mountinfo -q /selinux ; then - if grep -qs selinuxfs /proc/filesystems ; then + if [ -d /selinux ] && ! mountinfo -q /selinux; then + if grep -qs selinuxfs /proc/filesystems; then ebegin "Mounting SELinux filesystem" mount -t selinuxfs selinuxfs /selinux eend $? diff --git a/init.d.misc/named b/init.d.misc/named index 4b2a1175..7e853abe 100644 --- a/init.d.misc/named +++ b/init.d.misc/named @@ -96,8 +96,8 @@ start_pre() { local getuser="stat -f%Su" [ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U" case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in - root|"${named_uid}") ;; - *) ${confgen} ;; + root|"${named_uid}");; + *) ${confgen};; esac else ${confgen} diff --git a/init.d.misc/ntpd b/init.d.misc/ntpd index e0b20a7a..000bf366 100644 --- a/init.d.misc/ntpd +++ b/init.d.misc/ntpd @@ -34,7 +34,7 @@ name="Network Time Protocol Daemon" depend() { use dns need localmount - after bootmisc ntpdate ntp-client + after bootmisc ntp-client } start_pre() { diff --git a/init.d.misc/sshd b/init.d.misc/sshd index b12782ab..e02a8dbd 100644 --- a/init.d.misc/sshd +++ b/init.d.misc/sshd @@ -27,7 +27,7 @@ command=/usr/sbin/sshd command_args=${sshd_args} pidfile=/var/run/sshd.pid -required_files=/etc/sshd/sshd_config +required_files=/etc/ssh/sshd_config required_dirs=/var/empty depend() { diff --git a/init.d/checkfs b/init.d/checkfs index c5b8728c..4174b9b4 100755 --- a/init.d/checkfs +++ b/init.d/checkfs @@ -37,12 +37,12 @@ do_checkfs() { ebegin "Checking all filesystems" - if [ -e /forcefsck ] || get_bootparam "forcefsck" ; then + if [ -e /forcefsck ] || get_bootparam "forcefsck"; then ewarn "A full fsck has been forced" mode="-f -n" fi - if [ "${RC_UNAME}" = "Linux" ] ; then + if [ "${RC_UNAME}" = "Linux" ]; then opts="-A -C0 -R -T" else parts="$(fstabinfo --passno ">1")" @@ -52,14 +52,14 @@ do_checkfs() { fsck ${opts} ${mode} ${parts} retval=$? - if [ ${retval} -eq 0 ] ; then + if [ ${retval} -eq 0 ]; then eend 0 - elif [ ${retval} -eq 1 ] ; then + elif [ ${retval} -eq 1 ]; then ewend 1 "Filesystem errors corrected." retval=0 - elif [ ${retval} -eq 2 ] ; then + elif [ ${retval} -eq 2 ]; then ewend 1 "System should be rebooted" - elif [ ${retval} -eq 8 ] ; then + elif [ ${retval} -eq 8 ]; then ewend 1 "Operational error, continuing" retval=0 else @@ -70,7 +70,7 @@ do_checkfs() { eend ${retval} fi - if [ ${retval} -gt 3 ] ; then + if [ ${retval} -gt 3 ]; then eend 2 "Fsck could not correct all errors, manual repair needed" exec rc-abort || exit 1 fi diff --git a/init.d/checkroot b/init.d/checkroot index fb313b07..1397374a 100755 --- a/init.d/checkroot +++ b/init.d/checkroot @@ -29,7 +29,7 @@ and optionally repair them." do_mtab() { # Don't create mtab if /etc is readonly - if ! printf "" 2>/dev/null >/etc/mtab ; then + if ! printf "" 2>/dev/null >/etc/mtab; then ewarn "Skipping /etc/mtab initialization (ro root?)" return 0 fi @@ -59,7 +59,7 @@ do_fsck() { esac # Don't bother doing a fsck on these - if [ -n "${CDBOOT}" ] || is_net_fs / || is_union_fs / ; then + if [ -n "${CDBOOT}" ] || is_net_fs / || is_union_fs /; then return 0 fi @@ -71,7 +71,7 @@ do_fsck() { root=$(fstabinfo --blockdevice /) [ ! -e "${root}" -a -e /dev/root ] && root=/dev/root - if [ -e /forcefsck ] || get_bootparam "forcefsck" ; then + if [ -e /forcefsck ] || get_bootparam "forcefsck"; then ebegin "Checking root filesystem (full fsck forced)" fsck ${opts} -f -n "${root}" # /forcefsck isn't deleted because checkfs needs it. @@ -80,7 +80,7 @@ do_fsck() { else # Obey the fs_passno setting for / (see fstab(5)) local pass=$(fstabinfo --passno /) - if [ ${pass:-0} != "0" ] ; then + if [ ${pass:-0} != "0" ]; then ebegin "Checking root filesystem" fsck ${opts} -p "${root}" retval=$? @@ -90,15 +90,15 @@ do_fsck() { fi fi - if [ ${retval} -eq 0 ] ; then + if [ ${retval} -eq 0 ]; then eend 0 - elif [ ${retval} -eq 1 ] ; then + elif [ ${retval} -eq 1 ]; then ewend 1 "Filesystem repaired" retval=0 - elif [ ${retval} -eq 8 ] ; then + elif [ ${retval} -eq 8 ]; then ewend 1 $"Operational error, continuing" retval=0 - elif [ ${retval} -eq 2 -o ${retval} -eq 3 ] ; then + elif [ ${retval} -eq 2 -o ${retval} -eq 3 ]; then ewend 1 "Filesystem repaired, but reboot needed!" if ! yesno ${rc_force_auto:-${RC_FORCE_AUTO}}; then printf "\a"; sleep 1; printf "\a"; sleep 1 @@ -117,9 +117,9 @@ do_fsck() { eend 2 "Filesystem couldn't be fixed :(" exec rc-abort || exit 1 fi - if [ ${retval} != "0" ] ; then + if [ ${retval} != "0" ]; then einfo "Unmounting filesystems" - if [ "${RC_UNAME}" = "Linux" ] ; then + if [ "${RC_UNAME}" = "Linux" ]; then mount -a -o remount,ro / else mount -u -o ro / @@ -135,7 +135,7 @@ start() { if ! root_rw; then ebegin "Remounting root filesystem read/write" - if [ "${RC_UNAME}" = "Linux" ] ; then + if [ "${RC_UNAME}" = "Linux" ]; then mount -n -o remount,rw / else mount -u -o rw / diff --git a/init.d/halt.sh b/init.d/halt.sh index c3f76f3b..2e4dabee 100755 --- a/init.d/halt.sh +++ b/init.d/halt.sh @@ -29,7 +29,7 @@ [ -r /etc/rc.conf ] && . /etc/rc.conf # Support LiveCD foo -if [ -r /sbin/livecd-functions.sh ] ; then +if [ -r /sbin/livecd-functions.sh ]; then . /sbin/livecd-functions.sh livecd_read_commandline fi @@ -38,7 +38,7 @@ stop_addon devfs stop_addon udev # Really kill things off before unmounting -if [ -x /sbin/killall5 ] ; then +if [ -x /sbin/killall5 ]; then killall5 -15 killall5 -9 fi @@ -50,7 +50,7 @@ sync; sync # 1) we don't need (and by default can't) umount anything (VServer) or # 2) the host utils take care of all umounting stuff (OpenVZ) if [ "${RC_SYS}" = "VPS" ]; then - if [ -e /etc/init.d/"$1".sh ] ; then + if [ -e /etc/init.d/"$1".sh ]; then . /etc/init.d/"$1".sh else exit 0 @@ -60,11 +60,11 @@ fi # If $svcdir is still mounted, preserve it if we can mnt=$(mountinfo --node "${RC_SVCDIR}") -if [ -n "${mnt}" -a -w "${RC_LIBDIR}" ] ; then +if [ -n "${mnt}" -a -w "${RC_LIBDIR}" ]; then f_opts="-m -c" [ "${RC_UNAME}" = "Linux" ] && f_opts="-c" - if [ -n "$(fuser ${f_opts} "${svcdir}" 2>/dev/null)" ] ; then - fuser -k ${f_opts} "${svcdir}" 1>/dev/null 2>/dev/null + if [ -n "$(fuser ${f_opts} "${svcdir}" 2>/dev/null)" ]; then + fuser -k ${f_opts} "${svcdir}" >/dev/null 2>&1 sleep 2 fi cp -p "${RC_SVCDIR}"/deptree "${RC_SVCDIR}"/depconfig \ @@ -83,20 +83,20 @@ if [ -n "${mnt}" -a -w "${RC_LIBDIR}" ] ; then "${RC_LIBDIR}"/rc.log # Release the memory disk if we used it case "${mnt}" in - "/dev/md"[0-9]*) mdconfig -d -u "${mnt#/dev/md*}" ;; + "/dev/md"[0-9]*) mdconfig -d -u "${mnt#/dev/md*}";; esac fi unmounted=0 # Remount the remaining filesystems read-only # Most BSD's don't need this as the kernel handles it nicely -if [ "${RC_UNAME}" = "Linux" ] ; then +if [ "${RC_UNAME}" = "Linux" ]; then ebegin "Remounting remaining filesystems read-only" # We need the do_unmount function . "${RC_LIBDIR}"/sh/rc-mount.sh eindent fs= - for x in ${net_fs_list} ; do + for x in ${net_fs_list}; do fs="${fs}${fs:+|}${x}" done [ -n "${fs}" ] && fs="^(${fs})$" @@ -109,14 +109,14 @@ if [ "${RC_UNAME}" = "Linux" ] ; then fi # This UPS code should be moved to out of here and to an addon -if [ -f /etc/killpower ] ; then +if [ -f /etc/killpower ]; then UPS_CTL=/sbin/upsdrvctl UPS_POWERDOWN="${UPS_CTL} shutdown" -elif [ -f /etc/apcupsd/powerfail ] ; then +elif [ -f /etc/apcupsd/powerfail ]; then UPS_CTL=/etc/apcupsd/apccontrol UPS_POWERDOWN="${UPS_CTL} killpower" fi -if [ -x "${UPS_CTL}" ] ; then +if [ -x "${UPS_CTL}" ]; then ewarn "Signalling ups driver(s) to kill the load!" ${UPS_POWERDOWN} ewarn "Halt system and wait for the UPS to kill our power" @@ -124,7 +124,7 @@ if [ -x "${UPS_CTL}" ] ; then sleep 60 fi -if [ ${unmounted} -ne 0 ] ; then +if [ ${unmounted} -ne 0 ]; then [ -x /sbin/sulogin ] && sulogin -t 10 /dev/console exit 1 fi diff --git a/init.d/local b/init.d/local index 55fecd55..461b4aff 100755 --- a/init.d/local +++ b/init.d/local @@ -36,7 +36,7 @@ start() { # Add any misc programs that should be started # to /etc/conf.d/local.start - if [ -e /etc/conf.d/local.start ] ; then + if [ -e /etc/conf.d/local.start ]; then . /etc/conf.d/local.start fi @@ -48,7 +48,7 @@ stop() { # Add any misc programs that should be stopped # to /etc/conf.d/local.stop - if [ -e /etc/conf.d/local.stop ] ; then + if [ -e /etc/conf.d/local.stop ]; then . /etc/conf.d/local.stop fi diff --git a/init.d/localmount b/init.d/localmount index 9823820c..d05822ec 100755 --- a/init.d/localmount +++ b/init.d/localmount @@ -58,7 +58,7 @@ stop() { for x in ${no_umounts} ${RC_NO_UMOUNTS}; do no_umounts="${no_umounts}|${x}" done - if [ "${SIFS}" = "y" ] ; then + if [ "${SIFS}" = "y" ]; then IFS=$OIFS else unset IFS diff --git a/init.d/netmount b/init.d/netmount index 8742f9e0..08cdf42d 100755 --- a/init.d/netmount +++ b/init.d/netmount @@ -30,9 +30,9 @@ need_portmap() { local mnt opts ret IFS=" " set -- $(fstabinfo --fstype nfs,nfs4) - for mnt in "$@" ; do + for mnt in "$@"; do case ,$(fstabinfo --options "${mnt}"), in - *,noauto,*|*,nolock,*) ;; + *,noauto,*|*,nolock,*);; *) return 0;; esac done @@ -89,7 +89,7 @@ stop() { ebegin "Unmounting network filesystems" . "${RC_LIBDIR}/sh/rc-mount.sh" - for x in ${net_fs_list} ; do + for x in ${net_fs_list}; do fs="${fs}${fs:+,}${x}" done if [ -n "${fs}" ]; then diff --git a/init.d/rmnologin b/init.d/rmnologin index c5254e65..925ddcaf 100755 --- a/init.d/rmnologin +++ b/init.d/rmnologin @@ -32,7 +32,7 @@ depend() { } start() { - if [ -f /etc/nologin.boot ] ; then + if [ -f /etc/nologin.boot ]; then rm -f /etc/nologin /etc/nologin.boot fi } diff --git a/init.d/urandom b/init.d/urandom index 9a03068b..5d3a8404 100755 --- a/init.d/urandom +++ b/init.d/urandom @@ -35,7 +35,7 @@ depend() { save_seed() { local poolsize=1 - if [ -e /proc/sys/kernel/random/poolsize ] ; then + if [ -e /proc/sys/kernel/random/poolsize ]; then poolsize=$(($(cat /proc/sys/kernel/random/poolsize) / 4096)) fi @@ -47,7 +47,7 @@ save_seed() { start() { [ -c /dev/urandom ] || return - if [ -f "${urandom_seed}" ] ; then + if [ -f "${urandom_seed}" ]; then ebegin "Initializing random number generator" cat "${urandom_seed}" > /dev/urandom eend $? "Error initializing random number generator" diff --git a/net.BSD/ifconfig.sh b/net.BSD/ifconfig.sh index 5b32f4b2..6967bf45 100644 --- a/net.BSD/ifconfig.sh +++ b/net.BSD/ifconfig.sh @@ -31,7 +31,7 @@ ifconfig_depend() { _exists() { # Only FreeBSD sees to have /dev/net .... is there something # other than ifconfig we can use for the others? - if [ -d /dev/net ] ; then + if [ -d /dev/net ]; then [ -e /dev/net/"${IFACE}" ] else ifconfig "${IFACE}" >/dev/null 2>&1 @@ -43,10 +43,10 @@ _get_mac_address() { sed -n -e 's/^[[:space:]]*ether \(..:..:..:..:..:..\).*/\1/p') case "${mac}" in - 00:00:00:00:00:00) ;; - 44:44:44:44:44:44) ;; - FF:FF:FF:FF:FF:FF) ;; - *) echo "${mac}"; return 0 ;; + 00:00:00:00:00:00);; + 44:44:44:44:44:44);; + FF:FF:FF:FF:FF:FF);; + *) echo "${mac}"; return 0;; esac return 1 @@ -64,8 +64,8 @@ _ifindex() { local x= i=1 case "${RC_UNAME}" in FreeBSD|DragonFly) - for x in /dev/net[0-9]* ; do - if [ "${x}" -ef /dev/net/"${IFACE}" ] ; then + for x in /dev/net[0-9]*; do + if [ "${x}" -ef /dev/net/"${IFACE}" ]; then echo "${x#/dev/net}" return 0 fi @@ -73,8 +73,8 @@ _ifindex() { done ;; default) - for x in $(ifconfig -a | sed -n -e 's/^\([^[:space:]]*\):.*/\1/p') ; do - if [ "${x}" = "${IFACE}" ] ; then + for x in $(ifconfig -a | sed -n -e 's/^\([^[:space:]]*\):.*/\1/p'); do + if [ "${x}" = "${IFACE}" ]; then echo "${i}" return 0 fi @@ -107,10 +107,10 @@ _add_address() { local inet6= case "$@" in - *:*) inet6=inet6 ;; + *:*) inet6=inet6;; esac - if [ "${metric:-0}" != "0" ] ; then + if [ "${metric:-0}" != "0" ]; then set -- "$@" metric ${metric} fi @@ -130,32 +130,32 @@ _add_address() { } _add_route() { - if [ $# -gt 3 ] ; then - if [ "$3" = "gw" -o "$3" = "via" ] ; then + if [ $# -gt 3 ]; then + if [ "$3" = "gw" -o "$3" = "via" ]; then local one=$1 two=$2 - shift ; shift; shift + shift; shift; shift set -- "${one}" "${two}" "$@" fi fi case "$@" in - *:*) route add -inet6 "$@" ;; - *) route add "$@" ;; + *:*) route add -inet6 "$@";; + *) route add "$@";; esac } _delete_addresses() { # We don't remove addresses from aliases case "${IFACE}" in - *:*) return 0 ;; + *:*) return 0;; esac einfo "Removing addresses" eindent local addr= for addr in $(LC_ALL=C ifconfig "${IFACE}" | - sed -n -e 's/^[[:space:]]*inet \([^ ]*\).*/\1/p') ; do - if [ "${addr}" = "127.0.0.1" ] ; then + sed -n -e 's/^[[:space:]]*inet \([^ ]*\).*/\1/p'); do + if [ "${addr}" = "127.0.0.1" ]; then # Don't delete the loopback address [ "$1" = "lo" -o "$1" = "lo0" ] && continue fi @@ -166,10 +166,10 @@ _delete_addresses() { # Remove IPv6 addresses for addr in $(LC_ALL=C ifconfig "${IFACE}" | \ - sed -n -e 's/^[[:space:]]*inet6 \([^ ]*\).*/\1/p') ; do + sed -n -e 's/^[[:space:]]*inet6 \([^ ]*\).*/\1/p'); do case "${addr}" in - *"%${IFACE}") continue ;; - ::1) continue ;; + *"%${IFACE}") continue;; + ::1) continue;; esac einfo "${addr}" ifconfig "${IFACE}" inet6 delete "${addr}" @@ -203,11 +203,11 @@ ifconfig_pre_start() { args= for arg in ${conf}; do case ${arg} in - [Dd][Hh][Cc][Pp]) ;; - [Nn][Oo][Aa][Uu][Tt][Oo]) ;; - [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;; - [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;; - [Ww][Pp][Aa]) ;; + [Dd][Hh][Cc][Pp]);; + [Nn][Oo][Aa][Uu][Tt][Oo]);; + [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]);; + [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]);; + [Ww][Pp][Aa]);; *) args="${args} ${arg}";; esac done diff --git a/net.BSD/iwconfig.sh b/net.BSD/iwconfig.sh index 182bc47d..86537767 100644 --- a/net.BSD/iwconfig.sh +++ b/net.BSD/iwconfig.sh @@ -45,7 +45,7 @@ iwconfig_get_wep_status() { _iwconfig_get() { LC_ALL=C ifconfig "${IFACE}" | \ - sed -n -e "s/^[[:space:]]*ssid \(.*\) channel \([0-9]*\) bssid \(..:..:..:..:..:..\)\$/\\$1/p" + sed -n -e "s/^[[:space:]]*ssid \(.*\) channel \([0-9]*\).* bssid \(..:..:..:..:..:..\)\$/\\$1/p" } _get_ssid() { diff --git a/net.Linux/apipa.sh b/net.Linux/apipa.sh index d7c959eb..42e85f5d 100644 --- a/net.Linux/apipa.sh +++ b/net.Linux/apipa.sh @@ -28,8 +28,9 @@ apipa_depend() { } _random() { - if [ -n "${BASH}" ] ; then - echo "${RANDOM}" + local r=${RANDOM} + if [ -n "${r}" ]; then + echo "${r}" else uuidgen | sed -n -e 's/[^[:digit:]]//g' -e 's/\(^.\{1,7\}\).*/\1/p' fi @@ -49,7 +50,7 @@ apipa_start() { addr="169.254.${i1}.${i2}" vebegin "${addr}/16" - if ! arping_address "${addr}" ; then + if ! arping_address "${addr}"; then eval config_${config_index}="\"${addr}/16 broadcast 169.254.255.255\"" config_index=$((${config_index} - 1)) veend 0 diff --git a/net.Linux/arping.sh b/net.Linux/arping.sh index 977b1911..d173465b 100644 --- a/net.Linux/arping.sh +++ b/net.Linux/arping.sh @@ -33,9 +33,9 @@ arping_address() { # We only handle IPv4 addresses case "${ip}" in - 0.0.0.0|0) return 1 ;; - *.*.*.*) ;; - *) return 1 ;; + 0.0.0.0|0) return 1;; + *.*.*.*);; + *) return 1;; esac # We need to bring the interface up to test @@ -64,8 +64,8 @@ arping_address() { fi [ -z "${foundmac}" ] && return 1 - if [ -n "${mac}" ] ; then - if [ "${mac}" != "${foundmac}" ] ; then + if [ -n "${mac}" ]; then + if [ "${mac}" != "${foundmac}" ]; then vewarn "Found ${ip} but MAC ${foundmac} does not match" return 1 fi @@ -86,7 +86,7 @@ arping_start() { einfo "Pinging gateways on ${IFACE} for configuration" eval gateways=\$gateways_${IFVAR} - if [ -z "${gateways}" ] ; then + if [ -z "${gateways}" ]; then eerror "No gateways have been defined (gateways_${IFVAR}=\"...\")" return 1 fi @@ -99,18 +99,18 @@ arping_start() { local ip=$1 mac=$2 spoof=$3 extra= unset IFS - if [ -n "${mac}" ] ; then + if [ -n "${mac}" ]; then mac="$(echo "${mac}" | tr '[:lower:]' '[:upper:]')" extra="(MAC ${mac})" fi vebegin "${ip} ${extra}" - if arping_address "${ip}" "${mac}" "${spoof}" ; then + if arping_address "${ip}" "${mac}" "${spoof}"; then local IFS=. - for i in ${ip} ; do - if [ "${#i}" = "2" ] ; then + for i in ${ip}; do + if [ "${#i}" = "2" ]; then conf="${conf}0${i}" - elif [ "${#i}" = "1" ] ; then + elif [ "${#i}" = "1" ]; then conf="${conf}00${i}" else conf="${conf}${i}" diff --git a/net.Linux/bonding.sh b/net.Linux/bonding.sh index 23c05db3..617f76f6 100644 --- a/net.Linux/bonding.sh +++ b/net.Linux/bonding.sh @@ -40,8 +40,8 @@ bonding_pre_start() { [ -z "${slaves}" ] && return 0 # Load the kernel module if required - if [ ! -d /proc/net/bonding ] ; then - if ! modprobe bonding ; then + if [ ! -d /proc/net/bonding ]; then + if ! modprobe bonding; then eerror "Cannot load the bonding module" return 1 fi @@ -49,12 +49,12 @@ bonding_pre_start() { # We can create the interface name we like now, but this # requires sysfs - if ! _exists && [ -d /sys/class/net ] ; then + if ! _exists && [ -d /sys/class/net ]; then echo "+${IFACE}" > /sys/class/net/bonding_masters fi _exists true || return 1 - if ! _is_bond ; then + if ! _is_bond; then eerror "${IFACE} is not capable of bonding" return 1 fi @@ -107,7 +107,7 @@ bonding_stop() { # reset all slaves ( for IFACE in ${slaves}; do - if _exists ; then + if _exists; then _delete_addresses _down fi diff --git a/net.Linux/br2684ctl.sh b/net.Linux/br2684ctl.sh index ea5c0ef5..b3f186e4 100644 --- a/net.Linux/br2684ctl.sh +++ b/net.Linux/br2684ctl.sh @@ -35,7 +35,7 @@ br2684ctl_pre_start() { eval opts=\$br2684ctl_${IFVAR} [ -z "${opts}" ] && return 0 - if [ "${IFACE#nas[0-9]*}" = "${IFACE}" ] ; then + if [ "${IFACE#nas[0-9]*}" = "${IFACE}" ]; then eerror "Interface must be called nas[0-9] for RFC 2684 Bridging" return 1 fi @@ -45,7 +45,7 @@ br2684ctl_pre_start() { eerror "The -b and -c options are not allowed for br2684ctl_${IVAR}" return 1 ;; - *" -a "*) ;; + *" -a "*);; *) eerror "-a option (VPI and VCI) is required in br2684ctl_${IFVAR}" return 1 diff --git a/net.Linux/bridge.sh b/net.Linux/bridge.sh index d0545890..6c3019bc 100644 --- a/net.Linux/bridge.sh +++ b/net.Linux/bridge.sh @@ -45,7 +45,7 @@ bridge_pre_start() { [ -n "${ports}" ] && bridge_post_stop ( - if [ -z "${ports}" -a -n "${brif}" ] ; then + if [ -z "${ports}" -a -n "${brif}" ]; then ports="${IFACE}" IFACE="${brif}" else @@ -100,7 +100,7 @@ bridge_pre_start() { bridge_post_stop() { local port= ports= delete=false extra= - if _is_bridge ; then + if _is_bridge; then ebegin "Destroying bridge ${IFACE}" _down ports="$(brctl show 2>/dev/null | \ diff --git a/net.Linux/ccwgroup.sh b/net.Linux/ccwgroup.sh index 8fc4ce90..ed70bb54 100644 --- a/net.Linux/ccwgroup.sh +++ b/net.Linux/ccwgroup.sh @@ -33,9 +33,9 @@ ccwgroup_pre_start() { local ccwgroup="$(_get_array "ccwgroup_${IFVAR}")" [ -z "${ccwgroup}" ] && return 0 - if [ ! -d /sys/bus/ccwgroup ] ; then + if [ ! -d /sys/bus/ccwgroup ]; then modprobe qeth - if [ ! -d /sys/bus/ccwgroup ] ; then + if [ ! -d /sys/bus/ccwgroup ]; then eerror "ccwgroup support missing in kernel" return 1 fi @@ -47,7 +47,7 @@ ccwgroup_pre_start() { [ -z "${first}" ] && first=${x} ccw="${ccw}${ccw:+,}${x}" done - if [ -e /sys/devices/qeth/"${first}" ] ; then + if [ -e /sys/devices/qeth/"${first}" ]; then echo "0" > /sys/devices/qeth/"${first}"/online else echo "${ccw}" > /sys/bus/ccwgroup/drivers/qeth/group @@ -65,8 +65,8 @@ ccwgroup_pre_stop() { [ ! -L /sys/class/net/"${FACE}"/driver ] && return 0 local driver="$(readlink /sys/class/net/"${IFACE}"/driver)" case "${diver}" in - */bus/ccwgroup/*) ;; - *) return 0 ;; + */bus/ccwgroup/*);; + *) return 0;; esac local device="$(readlink /sys/class/net/"${IFACE}"/device)" diff --git a/net.Linux/clip.sh b/net.Linux/clip.sh index 7c7ec7d4..329716b4 100644 --- a/net.Linux/clip.sh +++ b/net.Linux/clip.sh @@ -83,24 +83,24 @@ clip_pre_start() { eval clip=\$clip_${IFVAR} [ -z "${clip}" ] && return 0 - if [ ! -r /proc/net/atm/arp ] ; then + if [ ! -r /proc/net/atm/arp ]; then modprobe clip && sleep 2 - if [ ! -r /proc/net/atm/arp ] ; then + if [ ! -r /proc/net/atm/arp ]; then eerror "You need first to enable kernel support for ATM CLIP" return 1 fi fi local started_here= - if ! are_atmclip_svcs_running ; then + if ! are_atmclip_svcs_running; then atmclip_svcs_start || return 1 started_here=1 fi - if ! _exists ; then + if ! _exists; then ebegin "Creating CLIP interface ${IFACE}" atmarp -c "${IFACE}" - if ! eend $? ; then + if ! eend $?; then [ -z "${started_here}" ] && atmclip_svcs_stop return 1 fi @@ -130,7 +130,7 @@ clip_post_start() { # reporting problems. Also, when no defined VC can be established, # we stop the ATM daemons. local has_failures= i= - for i in ${clip} ; do + for i in ${clip}; do local IFS="," set -- ${i} unset IFS @@ -139,14 +139,14 @@ clip_post_start() { ebegin "Creating PVC ${ifvpivci} for peer ${peerip}" local nleftretries=10 emsg= ecode= - while [ ${nleftretries} -gt 0 ] ; do + while [ ${nleftretries} -gt 0 ]; do nleftretries=$((${nleftretries} - 1)) emsg="$(atmarp -s "${peerip}" "${ifvpivci}" "$@" 2>&1)" ecode=$? && break sleep 2 done - if ! eend ${ecode} ; then + if ! eend ${ecode}; then eerror "Creation failed for PVC ${ifvpivci}: ${emsg}" has_failures=1 fi @@ -175,7 +175,7 @@ clip_pre_stop() { eindent { read left && \ - while read itf t encp idle ipaddr left ; do + while read itf t encp idle ipaddr left; do if [ "${itf}" = "${IFACE}" ]; then ebegin "Removing PVC to ${ipaddr}" atmarp -d "${ipaddr}" @@ -197,15 +197,15 @@ clip_post_stop() { local itf= left= hasothers= { read left && \ - while read itf left ; do - if [ "${itf}" != "${IFACE}" ] ; then + while read itf left; do + if [ "${itf}" != "${IFACE}" ]; then hasothers=1 break fi done } < /proc/net/atm/arp - if [ -z "${hasothers}" ] ; then + if [ -z "${hasothers}" ]; then atmclip_svcs_stop || return 1 fi } diff --git a/net.Linux/ifconfig.sh b/net.Linux/ifconfig.sh index 2b1465a2..04a9ec1e 100644 --- a/net.Linux/ifconfig.sh +++ b/net.Linux/ifconfig.sh @@ -42,7 +42,7 @@ _exists() { _ifindex() { local line= i=-2 - while read line ; do + while read line; do i=$((${i} + 1)) [ ${i} -lt 1 ] && continue case "${line}" in @@ -74,11 +74,11 @@ _get_mac_address() { case "${mac}" in - 00:00:00:00:00:00) ;; - 44:44:44:44:44:44) ;; - FF:FF:FF:FF:FF:FF) ;; - "") ;; - *) echo "${mac}"; return 0 ;; + 00:00:00:00:00:00);; + 44:44:44:44:44:44);; + FF:FF:FF:FF:FF:FF);; + "");; + *) echo "${mac}"; return 0;; esac return 1 @@ -102,7 +102,7 @@ _get_inet_addresses() { local iface=${IFACE} i=0 local addrs="$(_get_inet_address)" - while true ; do + while true; do local IFACE="${iface}:${i}" _exists || break local addr="$(_get_inet_address)" @@ -118,14 +118,14 @@ _cidr2netmask() { local octets=$((${cidr} / 8)) local frac=$((${cidr} % 8)) - while [ ${octets} -gt 0 ] ; do + while [ ${octets} -gt 0 ]; do netmask="${netmask}.255" octets=$((${octets} - 1)) done=$((${done} + 1)) done - if [ ${done} -lt 4 ] ; then - while [ ${i} -lt ${frac} ] ; do + if [ ${done} -lt 4 ]; then + while [ ${i} -lt ${frac} ]; do sum=$((${sum} + ${cur})) cur=$((${cur} / 2)) i=$((${i} + 1)) @@ -133,7 +133,7 @@ _cidr2netmask() { netmask="${netmask}.${sum}" done=$((${done} + 1)) - while [ ${done} -lt 4 ] ; do + while [ ${done} -lt 4 ]; do netmask="${netmask}.0" done=$((${done} + 1)) done @@ -143,7 +143,7 @@ _cidr2netmask() { } _add_address() { - if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ] ; then + if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then ifconfig "${IFACE}" "$@" 2>/dev/null return 0 fi @@ -155,7 +155,7 @@ _add_address() { # IPv4 is tricky - ifconfig requires an aliased device # for multiple addresses local iface="${IFACE}" - if LC_ALL=C ifconfig "${iface}" | grep -Eq "\<inet addr:.*" ; then + if LC_ALL=C ifconfig "${iface}" | grep -Eq "\<inet addr:.*"; then # Get the last alias made for the interface and add 1 to it i=$(ifconfig | sed '1!G;h;$!d' | grep -m 1 -o "^${iface}:[0-9]*" \ | sed -n -e 's/'"${iface}"'://p') @@ -172,17 +172,17 @@ _add_address() { fi local arg= cmd= - while [ -n "$1" ] ; do + while [ -n "$1" ]; do case "$1" in brd) - if [ "$2" = "+" ] ; then + if [ "$2" = "+" ]; then shift else cmd="${cmd} broadcast" fi ;; peer) cmd="${cmd} pointtopoint";; - *) cmd="${cmd} $1" ;; + *) cmd="${cmd} $1";; esac shift done @@ -193,15 +193,15 @@ _add_address() { _add_route() { local inet6= - if [ -n "${metric}" ] ; then + if [ -n "${metric}" ]; then set -- "$@" metric ${metric} fi - if [ $# -eq 3 ] ; then + if [ $# -eq 3 ]; then set -- "$1" "$2" gw "$3" - elif [ "$3" = "via" ] ; then + elif [ "$3" = "via" ]; then local one=$1 two=$2 - shift ; shift; shift + shift; shift; shift set -- "${one}" "${two}" gw "$@" fi @@ -218,7 +218,7 @@ _add_route() { _delete_addresses() { # We don't remove addresses from aliases case "${IFACE}" in - *:*) return 0 ;; + *:*) return 0;; esac einfo "Removing addresses" @@ -227,11 +227,11 @@ _delete_addresses() { # iproute2 added addresses cause problems for ifconfig # as we delete an address, a new one appears, so we have to # keep polling - while true ; do + while true; do local addr=$(_get_inet_address) [ -z "${addr}" ] && break - if [ "${addr}" = "127.0.0.1/8" ] ; then + if [ "${addr}" = "127.0.0.1/8" ]; then # Don't delete the loopback address [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ] && break fi @@ -242,7 +242,7 @@ _delete_addresses() { # Remove IPv6 addresses local addr= for addr in $(LC_ALL=C ifconfig "${IFACE}" | \ - sed -n -e 's/^.*inet6 addr: \([^ ]*\) Scope:[^L].*/\1/p') ; do + sed -n -e 's/^.*inet6 addr: \([^ ]*\) Scope:[^L].*/\1/p'); do [ "${addr}" = "::1/128" -a "${IFACE}" = "lo" ] && continue einfo "${addr}" ifconfig "${IFACE}" inet6 del "${addr}" diff --git a/net.Linux/ifplugd.sh b/net.Linux/ifplugd.sh index 3c90f860..58edffc7 100644 --- a/net.Linux/ifplugd.sh +++ b/net.Linux/ifplugd.sh @@ -35,22 +35,22 @@ ifplugd_depend() { ifplugd_pre_start() { local pidfile="/var/run/ifplugd.${IFACE}.pid" timeout= args= - # We don't start netplug if we're being called from the background + # We don't start ifplugd if we're being called from the background yesno ${IN_BACKGROUND} && return 0 _exists || return 0 # We need a valid MAC address # It's a basic test to ensure it's not a virtual interface - if ! _get_mac_address >/dev/null 2>/dev/null ; then - vewarn "netplug only works on interfaces with a valid MAC address" + if ! _get_mac_address >/dev/null 2>&1; then + vewarn "ifplugd only works on interfaces with a valid MAC address" return 0 fi # We don't work on bonded, bridges, tun/tap, vlan or wireless - for f in bond bridge tuntap vlan wireless ; do - if type "_is_${f}" >/dev/null 2>/dev/null ; then - if _is_${f} ; then + for f in bond bridge tuntap vlan wireless; do + if type "_is_${f}" >/dev/null 2>&1; then + if _is_${f}; then veinfo "netplug does not work with" "${f}" return 0 fi @@ -73,28 +73,28 @@ ifplugd_pre_start() { eval timeout=\$plug_timeout_${IFVAR} [ -z "${timeout}" ] && timeout=-1 - if [ ${timeout} -eq 0 ] ; then - ewarn "WARNING: infinite timeout set for" "${IFACE}" "to come up" - elif [ ${timeout} -lt 0 ] ; then + if [ ${timeout} -eq 0 ]; then + ewarn "WARNING: infinite timeout set for ${IFACE} to come up" + elif [ ${timeout} -lt 0 ]; then einfo "Backgrounding ..." exit 1 fi - veinfo "Waiting for" "${IFACE}" "to be marked as started" + veinfo "Waiting for ${IFACE} to be marked as started" local i=0 - while true ; do - if service_started "${SVCNAME}" ; then + while true; do + if service_started "${SVCNAME}"; then _show_address exit 0 fi sleep 1 - [ ${timeout} -eq 0 ]] && continue + [ ${timeout} -eq 0 ] && continue i=$((${i} + 1)) [ ${i} -ge ${timeout} ] && break done - eend 1 "Failed to configure" "${IFACE}" "in the background" + eend 1 "Failed to configure ${IFACE} in the background" exit 1 } diff --git a/net.Linux/ip6to4.sh b/net.Linux/ip6to4.sh index f70d5cbe..77b7de10 100644 --- a/net.Linux/ip6to4.sh +++ b/net.Linux/ip6to4.sh @@ -32,7 +32,7 @@ ip6to4_depend() { ip6to4_start() { case " ${MODULES} " in *" ifconfig "*) - if [ "${IFACE}" != "sit0" ] ; then + if [ "${IFACE}" != "sit0" ]; then eerror "ip6to4 can only work on the sit0 interface using ifconfig" eerror "emerge sys-apps/iproute2 to use other interfaces" return 1 @@ -41,7 +41,7 @@ ip6to4_start() { local host= suffix= relay= addr= iface=${IFACE} new= localip= eval host=\$link_${IFVAR} - if [ -z "${host}" ] ; then + if [ -z "${host}" ]; then eerror "link_${IFVAR} not set" return 1 fi @@ -52,24 +52,24 @@ ip6to4_start() { IFACE=${host} addrs=$(_get_inet_addresses) IFACE=${iface} - if [ -z "${addrs}" ] ; then + if [ -z "${addrs}" ]; then eerror "${host} is not configured with an IPv4 address" return 1 fi - for addr in ${addrs} ; do + for addr in ${addrs}; do # Strip the subnet local ip="${addr%/*}" subnet="${addr#*/}" # We don't work on private IPv4 addresses case "${ip}" in - 127.*) continue ;; - 10.*) continue ;; - 192.168.*) continue ;; + 127.*) continue;; + 10.*) continue;; + 192.168.*) continue;; 172.*) local i=16 - while [ ${i} -lt 32 ] ; do + while [ ${i} -lt 32 ]; do case "${ip}" in - 172.${i}.*) break ;; + 172.${i}.*) break;; esac i=$((${i} + 1)) done @@ -89,19 +89,19 @@ ip6to4_start() { # Now apply our IPv6 address to our config new="${new}${new:+ }${ip6}/16" - if [ -n "${localip}" ] ; then + if [ -n "${localip}" ]; then localip="any" else localip="${ip}" fi done - if [ -z "${new}" ] ; then + if [ -z "${new}" ]; then eerror "No global IPv4 addresses found on interface ${host}" return 1 fi - if [ "${IFACE}" != "sit0" ] ; then + if [ "${IFACE}" != "sit0" ]; then ebegin "Creating 6to4 tunnel on ${IFACE}" _tunnel add "${IFACE}" mode sit ttl 255 remote any local "${localip}" eend $? || return 1 diff --git a/net.Linux/ipppd.sh b/net.Linux/ipppd.sh index 60e51062..4e113927 100644 --- a/net.Linux/ipppd.sh +++ b/net.Linux/ipppd.sh @@ -37,8 +37,8 @@ ipppd_pre_start() { # Check that we are a valid ippp interface case "${IFACE}" in - ippp[0-9]*) ;; - *) return 0 ;; + ippp[0-9]*);; + *) return 0;; esac # Check that the interface exists diff --git a/net.Linux/iproute2.sh b/net.Linux/iproute2.sh index 23183d60..d3f3e76a 100644 --- a/net.Linux/iproute2.sh +++ b/net.Linux/iproute2.sh @@ -43,7 +43,7 @@ _exists() { _ifindex() { local line= i=-2 - while read line ; do + while read line; do i=$((${i} + 1)) [ ${i} -lt 1 ] && continue case "${line}" in @@ -80,11 +80,11 @@ _get_mac_address() { -e '/link\// s/^.*\<\(..:..:..:..:..:..\)\>.*/\1/p') case "${mac}" in - 00:00:00:00:00:00) ;; - 44:44:44:44:44:44) ;; - FF:FF:FF:FF:FF:FF) ;; - "") ;; - *) echo "${mac}"; return 0 ;; + 00:00:00:00:00:00);; + 44:44:44:44:44:44);; + FF:FF:FF:FF:FF:FF);; + "");; + *) echo "${mac}"; return 0;; esac return 1 @@ -106,22 +106,22 @@ _get_inet_address() { } _add_address() { - if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ] ; then + if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then ip addr add "$@" dev "${IFACE}" 2>/dev/null return 0 fi # Convert an ifconfig line to iproute2 - if [ "$2" = "netmask" ] ; then + if [ "$2" = "netmask" ]; then local one="$1" three="$3" - shift ; shift ; shift + shift; shift; shift set -- "${one}/$(_netmask2cidr "${three}")" "$@" fi #config=( "${config[@]//pointopoint/peer}" ) # Always scope lo addresses as host unless specified otherwise - if [ "${IFACE}" = "lo" ] ; then + if [ "${IFACE}" = "lo" ]; then set -- "$@" "scope" "host" fi @@ -129,9 +129,9 @@ _add_address() { case "$1" in *.*.*.*) case "$@" in - *" brd "*) ;; - *" broadcast "*) ;; - *) set -- "$@" brd + ;; + *" brd "*);; + *" broadcast "*);; + *) set -- "$@" brd +;; esac ;; esac @@ -140,27 +140,27 @@ _add_address() { } _add_route() { - if [ $# -eq 3 ] ; then + if [ $# -eq 3 ]; then set -- "$1" "$2" via "$3" - elif [ "$3" = "gw" ] ; then + elif [ "$3" = "gw" ]; then local one=$1 two=$2 - shift ; shift; shift + shift; shift; shift set -- "${one}" "${two}" gw "$@" fi local cmd= have_metric=false - while [ -n "$1" ] ; do + while [ -n "$1" ]; do case "$1" in - metric) cmd="${cmd} $1"; have_metric=true ;; - netmask) cmd="${cmd}/$(_netmask2cidr "$2")"; shift ;; - -host|-net) ;; - -A) [ "$2" = "inet6" ] && shift ;; - *) cmd="${cmd} $1" ;; + metric) cmd="${cmd} $1"; have_metric=true;; + netmask) cmd="${cmd}/$(_netmask2cidr "$2")"; shift;; + -host|-net);; + -A) [ "$2" = "inet6" ] && shift;; + *) cmd="${cmd} $1";; esac shift done - if ! ${have_metric} && [ -n "${metric}" ] ; then + if ! ${have_metric} && [ -n "${metric}" ]; then cmd="${cmd} metric ${metric}" fi @@ -171,7 +171,7 @@ _add_route() { _delete_addresses() { ip addr flush dev "${IFACE}" scope global 2>/dev/null ip addr flush dev "${IFACE}" scope site 2>/dev/null - if [ "${IFACE}" != "lo" ] ; then + if [ "${IFACE}" != "lo" ]; then ip addr flush dev "${IFACE}" scope host 2>/dev/null fi return 0 @@ -198,7 +198,7 @@ iproute2_pre_start() { local tunnel= eval tunnel=\$iptunnel_${IFVAR} - if [ -n "${tunnel}" ] ; then + if [ -n "${tunnel}" ]; then # Set our base metric to 1000 metric=1000 @@ -220,8 +220,8 @@ iproute2_post_start() { iproute2_post_stop() { # Don't delete sit0 as it's a special tunnel - if [ "${IFACE}" != "sit0" ] ; then - if [ -n "$(ip tunnel show "${IFACE}" 2>/dev/null)" ] ; then + if [ "${IFACE}" != "sit0" ]; then + if [ -n "$(ip tunnel show "${IFACE}" 2>/dev/null)" ]; then ebegin "Destroying tunnel ${IFACE}" ip tunnel del "${IFACE}" eend $? diff --git a/net.Linux/iwconfig.sh b/net.Linux/iwconfig.sh index 066f2581..4f8e12fd 100644 --- a/net.Linux/iwconfig.sh +++ b/net.Linux/iwconfig.sh @@ -36,7 +36,7 @@ iwconfig_get_wep_status() { local mode= status="disabled" # No easy way of doing this grep in bash regex :/ - if LC_ALL=C iwconfig "${IFACE}" | grep -qE "^ +Encryption key:[*0-9,A-F]" ; then + if LC_ALL=C iwconfig "${IFACE}" | grep -qE "^ +Encryption key:[*0-9,A-F]"; then status="enabled" mode=$(LC_ALL=C iwconfig "${IFACE}" | sed -n -e 's/^.*Security mode:\(.*[^ ]\).*/\1/p') [ -n "${mode}" ] && mode=" - ${mode}" @@ -48,9 +48,9 @@ iwconfig_get_wep_status() { _get_ssid() { local i=5 ssid= - while [ ${i} -gt 0 ] ; do + while [ ${i} -gt 0 ]; do ssid=$(iwgetid --raw "${IFACE}") - if [ -n "${ssid}" ] ; then + if [ -n "${ssid}" ]; then echo "${ssid}" return 0 fi @@ -64,11 +64,11 @@ _get_ssid() { _get_ap_mac_address() { local mac="$(iwgetid --raw --ap "${IFACE}")" case "${mac}" in - "00:00:00:00:00:00") return 1 ;; - "44:44:44:44:44:44") return 1 ;; - "FF:00:00:00:00:00") return 1 ;; - "FF:FF:FF:FF:FF:FF") return 1 ;; - *) echo "${mac}" ;; + "00:00:00:00:00:00") return 1;; + "44:44:44:44:44:44") return 1;; + "FF:00:00:00:00:00") return 1;; + "FF:FF:FF:FF:FF:FF") return 1;; + *) echo "${mac}";; esac } @@ -117,13 +117,13 @@ iwconfig_get_wep_key() { [ -n "${mac}" ] && mac="$(echo "${mac}" | sed -e 's/://g')" eval key=\$mac_key_${mac} [ -z "${key}" ] && eval key=\$key_${SSIDVAR} - if [ -z "${key}" ] ; then + if [ -z "${key}" ]; then echo "off" else set -- ${key} local x= e=false - for x in "$@" ; do - if [ "${x}" = "enc" ] ; then + for x in "$@"; do + if [ "${x}" = "enc" ]; then e=true break fi @@ -141,7 +141,7 @@ iwconfig_user_config() { local IFS="$__IFS" for conf in ${config}; do unset IFS - if ! eval iwconfig "${IFACE}" "${conf}" ; then + if ! eval iwconfig "${IFACE}" "${conf}"; then ewarn "${IFACE} does not support the following configuration commands" ewarn " ${conf}" fi @@ -152,7 +152,7 @@ iwconfig_user_config() { local IFS="$__IFS" for conf in ${config}; do unset IFS - if ! eval iwpriv "${IFACE}" "${conf}" ; then + if ! eval iwpriv "${IFACE}" "${conf}"; then ewarn "${IFACE} does not support the following private ioctls" ewarn " ${conf}" fi @@ -172,7 +172,7 @@ iwconfig_setup_specific() { iwconfig_set_mode "${mode}" # Now set the key - if ! eval iwconfig "${IFACE}" key "${key}" ; then + if ! eval iwconfig "${IFACE}" key "${key}"; then if [ "${key}" != "off" ]; then ewarn "${IFACE} does not support setting keys" ewarn "or the parameter \"mac_key_${SSIDVAR}\" or \"key_${SSIDVAR}\" is incorrect" @@ -180,7 +180,7 @@ iwconfig_setup_specific() { fi # Then set the SSID - if ! iwconfig "${IFACE}" essid "${SSID}" ; then + if ! iwconfig "${IFACE}" essid "${SSID}"; then eerror "${IFACE} does not support setting SSID to \"${SSID}\"" return 1 fi @@ -188,7 +188,7 @@ iwconfig_setup_specific() { eval channel=\$channel_${SSIDVAR} [ -z "${channel}" ] && eval channel=\$channel_${IFVAR} # We default the channel to 3 - if ! iwconfig "${IFACE}" channel "${channel:-3}" ; then + if ! iwconfig "${IFACE}" channel "${channel:-3}"; then ewarn "${IFACE} does not support setting the channel to \"${channel:-3}\"" return 1 fi @@ -210,8 +210,8 @@ iwconfig_wait_for_association() { while true; do # Use sysfs if we can - if [ -e /sys/class/net/"${IFACE}"/carrier ] ; then - if [ "$(cat /sys/class/net/"${IFACE}"/carrier)" = "1" ] ; then + if [ -e /sys/class/net/"${IFACE}"/carrier ]; then + if [ "$(cat /sys/class/net/"${IFACE}"/carrier)" = "1" ]; then # Double check we have an ssid. This is mainly for buggy # prism54 drivers that always set their carrier on :/ [ -n "$(iwgetid --raw "${IFACE}")" ] && return 0 @@ -220,10 +220,10 @@ iwconfig_wait_for_association() { local atest= eval atest=\$associate_test_${IFVAR} atest=${atest:-mac} - if [ "${atest}" = "mac" -o "${atest}" = "all" ] ; then + if [ "${atest}" = "mac" -o "${atest}" = "all" ]; then [ -n "$(_get_ap_mac_address)" ] && return 0 fi - if [ "${atest}" = "quality" -o "${atest}" = "all" ] ; then + if [ "${atest}" = "quality" -o "${atest}" = "all" ]; then [ "$(sed -n -e 's/^.*'"${IFACE}"': *[0-9]* *\([0-9]*\).*/\1/p' \ /proc/net/wireless)" != "0" ] && return 0 fi @@ -249,17 +249,17 @@ iwconfig_associate() { else SSIDVAR=$(_shell_var "${SSID}") key="$(iwconfig_get_wep_key "${mac}")" - if [ "${wep_required}" = "on" -a "${key}" = "off" ] ; then + if [ "${wep_required}" = "on" -a "${key}" = "off" ]; then ewarn "WEP key is not set for \"${SSID}\" - not connecting" return 1 fi - if [ "${wep_required}" = "off" -a "${key}" != "off" ] ; then + if [ "${wep_required}" = "off" -a "${key}" != "off" ]; then key="off" ewarn "\"${SSID}\" is not WEP enabled - ignoring setting" fi - if ! eval iwconfig "${IFACE}" key "${key}" ; then - if [ "${key}" != "off" ] ; then + if ! eval iwconfig "${IFACE}" key "${key}"; then + if [ "${key}" != "off" ]; then ewarn "${IFACE} does not support setting keys" ewarn "or the parameter \"mac_key_${SSIDVAR}\" or \"key_${SSIDVAR}\" is incorrect" return 1 @@ -268,16 +268,16 @@ iwconfig_associate() { [ "${key}" != "off" ] && w="$(iwconfig_get_wep_status "${iface}")" fi - if ! iwconfig "${IFACE}" essid "${SSID}" ; then - if [ "${SSID}" != "any" ] ; then + if ! iwconfig "${IFACE}" essid "${SSID}"; then + if [ "${SSID}" != "any" ]; then ewarn "${IFACE} does not support setting SSID to \"${SSID}\"" fi fi # Only use channel or frequency - if [ -n "${chan}" ] ; then + if [ -n "${chan}" ]; then iwconfig "${IFACE}" channel "${chan}" - elif [ -n "${freq}" ] ; then + elif [ -n "${freq}" ]; then iwconfig "${IFACE}" freq "${freq}" fi [ -n "${mac}" ] && iwconfig "${IFACE}" ap "${mac}" @@ -287,19 +287,19 @@ iwconfig_associate() { ebegin "Connecting to \"${SSID}\" in ${mode} mode ${w}" - if [ "${SSID}" != "any" ] && type preassociate >/dev/null 2>/dev/null ; then + if [ "${SSID}" != "any" ] && type preassociate >/dev/null 2>&1; then veinfo "Running preassociate function" veindent ( preassociate ) local e=$? veoutdent - if [ ${e} -eq 0 ] ; then + if [ ${e} -eq 0 ]; then veend 1 "preassociate \"${SSID}\" on ${IFACE} failed" return 1 fi fi - if ! iwconfig_wait_for_association ; then + if ! iwconfig_wait_for_association; then eend 1 return 1 fi @@ -313,7 +313,7 @@ iwconfig_associate() { iwconfig_report - if type postassociate >/dev/null 2>/dev/null ; then + if type postassociate >/dev/null 2>&1; then veinfo "Running postassociate function" veindent ( postassociate ) @@ -332,12 +332,12 @@ iwconfig_scan() { eval x=\$sleep_scan_${IFVAR} [ -n "${x}" ] && sleep "${x}" - while [ ${i} -lt 3 ] ; do + while [ ${i} -lt 3 ]; do local scan="${scan}${scan:+ }$(LC_ALL=C iwlist "${IFACE}" scan 2>/dev/null | sed -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")" # If this is the first pass and txpower as off and we have no results # then we need to wait for at least 2 seconds whilst the interface # does an initial scan. - if [ "${i}" = "0" -a "${txpowerwasoff}" = "0" ] ; then + if [ "${i}" = "0" -a "${txpowerwasoff}" = "0" ]; then case "${scan}" in "'${IFACE} "*"No scan results"*) sleep 2 @@ -349,12 +349,12 @@ iwconfig_scan() { i=$((${i} + 1)) done - if [ -z "${scan}" ] ; then + if [ -z "${scan}" ]; then ewarn "${iface} does not support scanning" eoutdent eval x=\$adhoc_ssid_${IFVAR} [ -n "${x}" ] && return 0 - if [ -n "${preferred_aps}" ] ; then + if [ -n "${preferred_aps}" ]; then [ "${associate_order}" = "forcepreferred" ] || \ [ "${associate_order}" = "forcepreferredonly" ] && return 0 fi @@ -373,48 +373,48 @@ iwconfig_scan() { APS=-1 eval set -- ${scan} - for line in "$@" ; do - case "${line}" in - *Address:*) - APS=$((${APS} + 1)) - eval MAC_${APS}=\""$(echo "${line#*: }" | tr '[:lower:]' '[:upper:]')"\" - eval QUALITY_${APS}=0 - ;; - *ESSID:*) - x=${line#*\"} - x=${x%*\"} - eval SSID_${APS}=\$x - ;; - *Mode:*) - x="$(echo "${line#*:}" | tr '[:upper:]' '[:lower:]')" - if [ "${x}" = "master" ] ; then - eval MODE_${APS}=\"managed\" - else - eval MODE_${APS}=\$x - fi - ;; - *'Encryption key:'*) - x=${line#*:} - eval ENC_${APS}=\$x - ;; - #*Frequency:*) - # freq[i]="${line#*:}" - # x="${freq[i]#* }" - # freq[i]="${freq[i]%% *}${x:0:1}" - # ;; - *Channel:*) - x=${line#*:} - x=${x%% *} - eval CHAN_${APS}=\$x - ;; - *Quality*) - x=${line#*:} - x=${x%/*} - x="$(echo "${x}" | sed -e 's/[^[:digit:]]//g')" - x=${x:-0} - eval QUALITY_${APS}=\$x - ;; - esac + for line in "$@"; do + case "${line}" in + *Address:*) + APS=$((${APS} + 1)) + eval MAC_${APS}="\""$(echo "${line#*: }" | tr '[:lower:]' '[:upper:]')"\"" + eva l QUALITY_${APS}=0 + ;; + *ESSID:*) + x=${line#*\"} + x=${x%*\"} + eval SSID_${APS}=\$x + ;; + *Mode:*) + x="$(echo "${line#*:}" | tr '[:upper:]' '[:lower:]')" + if [ "${x}" = "master" ]; then + eval MODE_${APS}=managed + else + eval MODE_${APS}=\$x + fi + ;; + *'Encryption key:'*) + x=${line#*:} + eval ENC_${APS}=\$x + ;; + #*Frequency:*) + # freq[i]="${line#*:}" + # x="${freq[i]#* }" + # freq[i]="${freq[i]%% *}${x:0:1}" + # ;; + *Channel:*) + x=${line#*:} + x=${x%% *} + eval CHAN_${APS}=\$x + ;; + *Quality*) + x=${line#*:} + x=${x%/*} + x="$(echo "${x}" | sed -e 's/[^[:digit:]]//g')" + x=${x:-0} + eval QUALITY_${APS}=\$x + ;; + esac done if [ -z "${MAC_0}" ]; then @@ -425,14 +425,14 @@ iwconfig_scan() { # Sort based on quality local i=0 k=1 a= b= x= t= - while [ ${i} -lt ${APS} ] ; do + while [ ${i} -lt ${APS} ]; do k=$((${i} + 1)) - while [ ${k} -le ${APS} ] ; do + while [ ${k} -le ${APS} ]; do eval a=\$QUALITY_${i} [ -z "${a}" ] && break eval b=\$QUALITY_${k} - if [ -n "${b}" -a "${a}" -lt "${b}" ] ; then - for x in MAC SSID CHAN QUALITY ENC ; do + if [ -n "${b}" -a "${a}" -lt "${b}" ]; then + for x in MAC SSID CHAN QUALITY ENC; do eval t=\$${x}_${i} eval ${x}_${i}=\$${x}_${k} eval ${x}_${k}=\$t @@ -445,12 +445,12 @@ iwconfig_scan() { # Strip any duplicates local i=0 k=1 a= b= - while [ ${i} -lt ${APS} ] ; do + while [ ${i} -lt ${APS} ]; do k=$((${i} + 1)) - while [ ${k} -le ${APS} ] ; do + while [ ${k} -le ${APS} ]; do eval a=\$MAC_${i} eval b=\$MAC_${k} - if [ "${a}" = "${b}" ] ; then + if [ "${a}" = "${b}" ]; then eval a=\$QUALITY_${i} eval b=\$QUALITY_${k} local u=${k} @@ -465,9 +465,9 @@ iwconfig_scan() { local i=0 e= m= s= - while [ ${i} -le ${APS} ] ; do + while [ ${i} -le ${APS} ]; do eval x=\$MAC_${i} - if [ -z "${x}" ] ; then + if [ -z "${x}" ]; then i=$((${i} + 1)) continue fi @@ -476,12 +476,12 @@ iwconfig_scan() { eval s=\$SSID_${i} eval q=\$QUALITY_${i} eval e=\$ENC_${i} - if [ -n "${e}" -a "${e}" != "off" ] ; then + if [ -n "${e}" -a "${e}" != "off" ]; then e=", encrypted" else e="" fi - if [ -z "${s}" ] ; then + if [ -z "${s}" ]; then einfo "Found ${x}, ${m}${e}" else einfo "Found \"${s}\" at ${x}, ${m}${e}" @@ -489,7 +489,7 @@ iwconfig_scan() { x="$(echo "${x}" | sed -e 's/://g')" eval x=\$mac_ssid_${x} - if [ -n "${x}" ] ; then + if [ -n "${x}" ]; then eval SSID_${i}=\$x s=${x} eindent @@ -500,7 +500,7 @@ iwconfig_scan() { eval set -- $(_flatten_array "blacklist_aps_${IFVAR}") [ $# = 0 ] && eval set -- $(_flatten_array "blacklist_aps") for x in "$@"; do - if [ "${x}" = "${s}" ] ; then + if [ "${x}" = "${s}" ]; then ewarn "${s} has been blacklisted - not connecting" unset SSID_${i} MAC_${i} CHAN_${i} QUALITY_${i} ENC_${i} fi @@ -518,15 +518,15 @@ iwconfig_force_preferred() { ewarn "Trying to force preferred in case they are hidden" for ssid in "$@"; do local found_AP=false i=0 e= - while [ ${i} -le ${APS} ] ; do + while [ ${i} -le ${APS} ]; do eval e=\$SSID_${i} - if [ "${e}" = "${ssid}" ] ; then + if [ "${e}" = "${ssid}" ]; then found_AP=true break fi i=$((${i} + 1)) done - if ! ${found_AP} ; then + if ! ${found_AP}; then SSID=${e} iwconfig_associate && return 0 fi @@ -544,9 +544,9 @@ iwconfig_connect_preferred() { for ssid in "$@"; do unset IFS i=0 - while [ ${i} -le ${APS} ] ; do + while [ ${i} -le ${APS} ]; do eval e=\$SSID_${i} - if [ "${e}" = "${ssid}" ] ; then + if [ "${e}" = "${ssid}" ]; then SSID=${e} eval mode=\$MODE_${i} eval mac=\$MAC_${i} @@ -566,19 +566,19 @@ iwconfig_connect_preferred() { iwconfig_connect_not_preferred() { local ssid= i=0 mode= mac= enc= freq= chan= pref=false - while [ ${i} -le ${APS} ] ; do + while [ ${i} -le ${APS} ]; do eval e=\$SSID_${i} - if [ -n "${e}" ] ; then + if [ -n "${e}" ]; then eval set -- $(_flatten_array "preferred_aps_${IFVAR}") [ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps") for ssid in "$@"; do - if [ "${e}" = "${ssid}" ] ; then + if [ "${e}" = "${ssid}" ]; then pref=true break fi done - if ! ${pref} ; then + if ! ${pref}; then SSID=${e} eval mode=\$MODE_${i} eval mac=\$MAC_${i} @@ -597,7 +597,7 @@ iwconfig_connect_not_preferred() { iwconfig_defaults() { local x= - for x in txpower rate rts frag ; do + for x in txpower rate rts frag; do iwconfig "${IFACE}" "${x}" auto 2>/dev/null done @@ -617,12 +617,12 @@ iwconfig_configure() { # Setup ad-hoc mode? eval x=\$mode_${IFVAR} x=${x:-managed} - if [ "${x}" = "ad-hoc" -o "${x}" = "master" ] ; then + if [ "${x}" = "ad-hoc" -o "${x}" = "master" ]; then iwconfig_setup_specific "${x}" return $? fi - if [ "${x}" != "managed" -a "${x}" != "auto" ] ; then + if [ "${x}" != "managed" -a "${x}" != "auto" ]; then eerror "Only managed, ad-hoc, master and auto modes are supported" return 1 fi @@ -690,13 +690,13 @@ iwconfig_pre_start() { save_options "SSID" "" _exists || return 0 - if ! _is_wireless ; then + if ! _is_wireless; then veinfo "Wireless extensions not found for ${IFACE}" return 0 fi # Warn about old file - we want to punt it really - if [ -e /etc/conf.d/wireless ] ; then + if [ -e /etc/conf.d/wireless ]; then ewarn "/etc/conf.d/wireless is deprecated" ewarn "Please put all settings into /etc/conf.d/net" . /etc/conf.d/wireless @@ -715,8 +715,8 @@ iwconfig_pre_start() { # Check for rf_kill - only ipw supports this at present, but other # cards may in the future. - if [ -e /sys/class/net/"${IFACE}"/device/rf_kill ] ; then - if [ $(cat /sys/class/net/"${IFACE}"/device/rf_kill) != "0" ] ; then + if [ -e /sys/class/net/"${IFACE}"/device/rf_kill ]; then + if [ $(cat /sys/class/net/"${IFACE}"/device/rf_kill) != "0" ]; then eerror "Wireless radio has been killed for interface ${IFACE}" return 1 fi @@ -736,7 +736,7 @@ iwconfig_pre_start() { return 1 fi - if iwconfig_configure ; then + if iwconfig_configure; then save_options "SSID" "${SSID}" return 0 fi diff --git a/net.Linux/netplugd.sh b/net.Linux/netplugd.sh index 160c6a60..b1460b96 100644 --- a/net.Linux/netplugd.sh +++ b/net.Linux/netplugd.sh @@ -45,15 +45,15 @@ netplugd_pre_start() { # We need a valid MAC address # It's a basic test to ensure it's not a virtual interface - if ! _get_mac_address >/dev/null 2>/dev/null ; then + if ! _get_mac_address >/dev/null 2>&1; then vewarn "netplug only works on interfaces with a valid MAC address" return 0 fi # We don't work on bonded, bridges, tun/tap, vlan or wireless - for f in bond bridge tuntap vlan wireless ; do - if type "_is_${f}" >/dev/null 2>/dev/null ; then - if _is_${f} ; then + for f in bond bridge tuntap vlan wireless; do + if type "_is_${f}" >/dev/null 2>&1; then + if _is_${f}; then veinfo "netplug does not work with" "${f}" return 0 fi @@ -75,28 +75,28 @@ netplugd_pre_start() { eval timeout=\$plug_timeout_${IFVAR} [ -z "${timeout}" ] && timeout=-1 - if [ ${timeout} -eq 0 ] ; then - ewarn "WARNING: infinite timeout set for" "${IFACE}" "to come up" - elif [ ${timeout} -lt 0 ] ; then + if [ ${timeout} -eq 0 ]; then + ewarn "WARNING: infinite timeout set for ${IFACE} to come up" + elif [ ${timeout} -lt 0 ]; then einfo "Backgrounding ..." exit 1 fi - veinfo "Waiting for" "${IFACE}" "to be marked as started" + veinfo "Waiting for ${IFACE} to be marked as started" local i=0 - while true ; do - if service_started "${SVCNAME}" ; then + while true; do + if service_started "${SVCNAME}"; then _show_address exit 0 fi sleep 1 - [ ${timeout} -eq 0 ]] && continue + [ ${timeout} -eq 0 ] && continue i=$((${i} + 1)) [ ${i} -ge ${timeout} ] && break done - eend 1 "Failed to configure" "${IFACE}" "in the background" + eend 1 "Failed to configure ${IFACE} in the background" exit 1 } diff --git a/net.Linux/pppd.sh b/net.Linux/pppd.sh index de63dc95..d5db153c 100644 --- a/net.Linux/pppd.sh +++ b/net.Linux/pppd.sh @@ -49,7 +49,7 @@ pppd_pre_start() { local config= eval config=\$config_${IFVAR} # If no config for ppp then don't default to DHCP - if [ -z "${config}" ] ; then + if [ -z "${config}" ]; then eval config_${IFVAR}=null fi return 0 @@ -66,7 +66,7 @@ pppd_pre_start() { case "${link}" in /*) - if [ ! -e "${link}" ] ; then + if [ ! -e "${link}" ]; then eerror "${link} does not exist" eerror "Please verify hardware or kernel module (driver)" return 1 @@ -74,7 +74,7 @@ pppd_pre_start() { ;; esac - if [ -z "${unit}" ] ; then + if [ -z "${unit}" ]; then eerror "PPP requires a unit - use net.ppp[0-9] instead of net.ppp" return 1 fi @@ -91,12 +91,12 @@ pppd_pre_start() { eerror "The option \"${i}\" is not allowed in pppd_${IFVAR}" return 1 ;; - defaultmetric) hasdefaultmetric=true ;; - mtu) hasmtu=true ;; - mru) hasmru=true ;; - maxfail) hasmaxfail=true ;; - persist) haspersist=true ;; - updetach) hasupdetach=true ;; + defaultmetric) hasdefaultmetric=true;; + mtu) hasmtu=true;; + mru) hasmru=true;; + maxfail) hasmaxfail=true;; + persist) haspersist=true;; + updetach) hasupdetach=true;; esac done @@ -106,17 +106,17 @@ pppd_pre_start() { eval password=\$password_${IFVAR} eval passwordset=\$\{password_${IFVAR}-x\} if [ -n "${username}" ] \ - && [ -n "${password}" -o -z "${passwordset}" ] ; then + && [ -n "${password}" -o -z "${passwordset}" ]; then opts="${opts} plugin passwordfd.so passwordfd 0" fi - if ! ${hasdefaultmetric} ; then + if ! ${hasdefaultmetric}; then local m= eval m=\$metric_${IFVAR} [ -z "${m}" ] && m=$((${metric} + $(_ifindex))) opts="${opts} defaultmetric ${m}" fi - if [ -n "${mtu}" ] ; then + if [ -n "${mtu}" ]; then ${hasmtu} || opts="${opts} mtu ${mtu}" ${hasmru} || opts="${opts} mru ${mtu}" fi @@ -129,7 +129,7 @@ pppd_pre_start() { opts="linkname ${IFACE} ${opts}" # Setup auth info - if [ -n "${username}" ] ; then + if [ -n "${username}" ]; then opts="user '${username}' remotename ${IFACE} ${opts}" fi @@ -160,15 +160,15 @@ pppd_pre_start() { set -- ${i} case "$1" in passwordfd) continue;; - pppoa) shift; set -- "pppoatm" "$@" ;; - pppoe) shift; set -- "rp-pppoe" "$@" ;; - capi) shift; set -- "capiplugin" "$@" ;; + pppoa) shift; set -- "pppoatm" "$@";; + pppoe) shift; set -- "rp-pppoe" "$@";; + capi) shift; set -- "capiplugin" "$@";; esac case "$1" in - rp-pppoe) haspppoe=true ;; - pppoatm) haspppoa=true ;; + rp-pppoe) haspppoe=true;; + pppoatm) haspppoa=true;; esac - if [ "$1" = "rp-pppoe" ] || [ "$1" = "pppoatm" -a "${link}" != "/dev/null" ] ; then + if [ "$1" = "rp-pppoe" ] || [ "$1" = "pppoatm" -a "${link}" != "/dev/null" ]; then opts="${opts} connect true" set -- "$@" "${link}" fi @@ -180,30 +180,30 @@ pppd_pre_start() { #Specialized stuff. Insert here actions particular to connection type (pppoe,pppoa,capi) local insert_link_in_opts=1 - if ${haspppoe} ; then - if [ ! -e /proc/net/pppoe ] ; then + if ${haspppoe}; then + if [ ! -e /proc/net/pppoe ]; then # Load the PPPoE kernel module - if ! modprobe pppoe ; then + if ! modprobe pppoe; then eerror "kernel does not support PPPoE" return 1 fi fi # Ensure that the link exists and is up - ( IFACE="${link}" ; _exists true && _up ) || return 1 + ( IFACE="${link}"; _exists true && _up ) || return 1 insert_link_in_opts=0 fi - if ${haspppoa} ; then - if [ ! -d /proc/net/atm ] ; then + if ${haspppoa}; then + if [ ! -d /proc/net/atm ]; then # Load the PPPoA kernel module - if ! modprobe pppoatm ; then + if ! modprobe pppoatm; then eerror "kernel does not support PPPoATM" return 1 fi fi - if [ "${link}" != "/dev/null" ] ; then + if [ "${link}" != "/dev/null" ]; then insert_link_in_opts=0 else ewarn "WARNING: An [itf.]vpi.vci ATM address was expected in link_${IFVAR}" @@ -215,7 +215,7 @@ pppd_pre_start() { ebegin "Starting pppd in ${IFACE}" mark_service_inactive "${SVCNAME}" if [ -n "${username}" ] \ - && [ -n "${password}" -o -z "${passwordset}" ] ; then + && [ -n "${password}" -o -z "${passwordset}" ]; then printf "%s" "${password}" | \ eval start-stop-daemon --start --exec /usr/sbin/pppd \ --pidfile "/var/run/ppp-${IFACE}.pid" -- "${opts}" >/dev/null @@ -224,12 +224,12 @@ pppd_pre_start() { --pidfile "/var/run/ppp-${IFACE}.pid" -- "${opts}" >/dev/null fi - if ! eend $? "Failed to start PPP" ; then + if ! eend $? "Failed to start PPP"; then mark_service_stopped "net.${IFACE}" return 1 fi - if ${hasupdetach} ; then + if ${hasupdetach}; then _show_address else einfo "Backgrounding ..." diff --git a/net.Linux/pump.sh b/net.Linux/pump.sh index bb59dc5d..9e0fee0d 100644 --- a/net.Linux/pump.sh +++ b/net.Linux/pump.sh @@ -39,11 +39,11 @@ pump_start() { [ -z "${opts}" ] && opts=${dhcp} # Map some generic options to dhcpcd - for opt in ${opts} ; do + for opt in ${opts}; do case "${opt}" in - nodns) args="${args} --no-dns" ;; - nontp) args="${args} --no-ntp" ;; - nogateway) args="${args} --no-gateway" ;; + nodns) args="${args} --no-dns";; + nontp) args="${args} --no-ntp";; + nogateway) args="${args} --no-gateway";; esac done @@ -67,7 +67,7 @@ pump_stop() { start-stop-daemon --quiet --test --stop --exec /sbin/pump || return 0 # Check that pump is running on the interface - if ! pump --status --interface "${IFACE}" >/dev/null 2>/dev/null ; then + if ! pump --status --interface "${IFACE}" >/dev/null 2>&1; then return 0 fi diff --git a/net.Linux/udhcpc.sh b/net.Linux/udhcpc.sh index bded5bb5..2e887b6e 100644 --- a/net.Linux/udhcpc.sh +++ b/net.Linux/udhcpc.sh @@ -42,11 +42,11 @@ udhcpc_start() { [ -z "${opts}" ] && opts=${dhcp} # Map some generic options to dhcpcd - for opt in ${opts} ; do + for opt in ${opts}; do case "${opt}" in - nodns) args="${args} --env PEER_DNS=no" ;; - nontp) args="${args} --env PEER_NTP=no" ;; - nogateway) args="${args} --env PEER_ROUTERS=no" ;; + nodns) args="${args} --env PEER_DNS=no";; + nontp) args="${args} --env PEER_NTP=no";; + nogateway) args="${args} --env PEER_ROUTERS=no";; nosendhost) sendhost=false; esac done @@ -58,27 +58,27 @@ udhcpc_start() { # Try and load the cache if it exists if [ -f "${cachefile}" ]; then case "$ {args} " in - *" --request="*|*" -r "*) ;; + *" --request="*|*" -r "*);; *) local x=$(cat "${cachefile}") # Check for a valid ip case "${x}" in - *.*.*.*) args="${args} --request=${x}" ;; + *.*.*.*) args="${args} --request=${x}";; esac ;; esac fi case " ${args} " in - *" --quit "*|*" -q "*) x="/sbin/udhcpc" ;; + *" --quit "*|*" -q "*) x="/sbin/udhcpc";; *) x="start-stop-daemon --start --exec /sbin/udhcpc \ - --pidfile \"${pidfile}\" --" ;; + --pidfile \"${pidfile}\" --";; esac case " ${args} " in - *" --hosname="*|*" -h "*|*" -H "*) ;; + *" --hosname="*|*" -h "*|*" -H "*);; *) - if ${sendhost} ; then + if ${sendhost}; then local hname="$(hostname)" if [ "${hname}" != "(none)" ] && [ "${hname}" != "localhost" ]; then args="${args} --hostname='${hname}'" @@ -112,7 +112,7 @@ udhcpc_stop() { *" release "*) start-stop-daemon --stop --quiet --oknodo --signal USR2 \ --exec /sbin/udhcpc --pidfile "${pidfile}" - if [ -f /var/cache/udhcpc-"${IFACE}".lease ] ; then + if [ -f /var/cache/udhcpc-"${IFACE}".lease ]; then rm -f /var/cache/udhcpc-"${IFACE}".lease fi ;; diff --git a/net.Linux/vlan.sh b/net.Linux/vlan.sh index 2410b950..28bd1974 100644 --- a/net.Linux/vlan.sh +++ b/net.Linux/vlan.sh @@ -43,9 +43,9 @@ _get_vlans() { } _check_vlan() { - if [ ! -d /proc/net/vlan ] ; then + if [ ! -d /proc/net/vlan ]; then modprobe 8021q - if [ ! -d /proc/net/vlan ] ; then + if [ ! -d /proc/net/vlan ]; then eerror "VLAN (802.1q) support is not present in this kernel" return 1 fi @@ -64,13 +64,13 @@ vlan_pre_start() { for v in ${vc}; do unset IFS case "${v}" in - set_name_type" "*) x=${v} ;; + set_name_type" "*) x=${v};; *) set -- ${v} x="$1 ${IFACE}" shift x="${x} $@" - ;; + ;; esac e="$(vconfig ${x} 2>&1 1>/dev/null)" @@ -92,7 +92,7 @@ vlan_post_start() { for vlan in ${vlans}; do einfo "Adding VLAN ${vlan} to ${IFACE}" e="$(vconfig add "${IFACE}" "${vlan}" 2>&1 1>/dev/null)" - if [ -n "${e}" ] ; then + if [ -n "${e}" ]; then eend 1 "${e}" continue fi diff --git a/net/dhclient.sh b/net/dhclient.sh index 2d32b347..a59fb3bc 100644 --- a/net/dhclient.sh +++ b/net/dhclient.sh @@ -40,19 +40,19 @@ dhclient_start() { [ -z "${opts}" ] && opts=${dhcp} # Map some generic options to dhcpcd - for opt in ${opts} ; do + for opt in ${opts}; do case "${opt}" in - nodns) args="${args} -e PEER_DNS=no" ;; - nontp) args="${args} -e PEER_NTP=no" ;; - nogateway) args="${args} -e PEER_ROUTERS=no" ;; - nosendhost) sendhost=false ;; + nodns) args="${args} -e PEER_DNS=no";; + nontp) args="${args} -e PEER_NTP=no";; + nogateway) args="${args} -e PEER_ROUTERS=no";; + nosendhost) sendhost=false;; esac done # Add our route metric [ "${metric:-0}" != "0" ] && args="${args} -e IF_METRIC=${metric}" - if ${sendhost} ; then + if ${sendhost}; then local hname="$(hostname)" if [ "${hname}" != "(none)" -a "${hname}" != "localhost" ]; then dhconf="${dhconf} interface \"${IFACE}\" {" @@ -76,14 +76,14 @@ dhclient_stop() { [ ! -f "${pidfile}" ] && return 0 # Get our options - if [ -x /sbin/dhclient ] ; then + if [ -x /sbin/dhclient ]; then eval opts=\$dhcp_${IFVAR} [ -z "${opts}" ] && opts=${dhcp} fi ebegin "Stopping dhclient on ${IFACE}" case " ${opts} " in - *" release "*) dhclient -q -r -pf "${pidfile}" "${IFACE}" ;; + *" release "*) dhclient -q -r -pf "${pidfile}" "${IFACE}";; *) start-stop-daemon --stop --quiet \ --exec /sbin/dhclient --pidfile "${pidfile}" diff --git a/net/dhcpcd.sh b/net/dhcpcd.sh index 8d6692e8..d07295a8 100644 --- a/net/dhcpcd.sh +++ b/net/dhcpcd.sh @@ -44,12 +44,12 @@ dhcpcd_start() { [ -z "${opts}" ] && opts=${dhcp} # Map some generic options to dhcpcd - for opt in ${opts} ; do + for opt in ${opts}; do case "${opt}" in - nodns) args="${args} -R" ;; - nontp) args="${args} -N" ;; - nonis) args="${args} -Y" ;; - nogateway) args="${args} -G" ;; + nodns) args="${args} -R";; + nontp) args="${args} -N";; + nonis) args="${args} -Y";; + nogateway) args="${args} -G";; nosendhost) args="${args} -h ''"; esac done diff --git a/net/macchanger.sh b/net/macchanger.sh index c2dc27f4..825ede1d 100644 --- a/net/macchanger.sh +++ b/net/macchanger.sh @@ -51,7 +51,7 @@ macchanger_pre_start() { [0-9a-f][0-9a-f]:[0-9a-f][0-9a-f]:[0-9a-f][0-9a-f]:[0-9a-f][0-9a-f]:[0-9a-f][0-9a-f]:[0-9a-f][0-9a-f]) # We don't need macchanger to change to a specific mac address _set_mac_address "${mac}" - if eend "$?" ; then + if eend "$?"; then mac=$(_get_mac_address) eindent einfo "changed to ${mac}" @@ -62,25 +62,25 @@ macchanger_pre_start() { ;; # increment MAC address, default macchanger behavior - increment) opts="${opts}" ;; + increment) opts="${opts}";; # randomize just the ending bytes - random-ending) opts="${opts} -e" ;; + random-ending) opts="${opts} -e";; # keep the same kind of physical layer (eg fibre, copper) - random-samekind) opts="${opts} -a" ;; + random-samekind) opts="${opts} -a";; # randomize to any known vendor of any physical layer type - random-anykind) opts="${opts} -A" ;; + random-anykind) opts="${opts} -A";; # fully random bytes - random-full|random) opts="${opts} -r" ;; + random-full|random) opts="${opts} -r";; # default case is just to pass on all the options - *) opts="${opts} ${mac}" ;; + *) opts="${opts} ${mac}";; esac - if [ ! -x /sbin/macchanger ] ; then + if [ ! -x /sbin/macchanger ]; then eerror "For changing MAC addresses, emerge net-analyzer/macchanger" return 1 fi @@ -90,12 +90,12 @@ macchanger_pre_start() { _up # Sometimes the interface needs to be up .... - if [ -z "${mac}" ] ; then + if [ -z "${mac}" ]; then mac=$(/sbin/macchanger ${opts} "${IFACE}" \ | sed -n -e 's/^Faked MAC:.*\<\(..:..:..:..:..:..\)\>.*/\U\1/p' ) fi - if [ -z "${mac}" ] ; then + if [ -z "${mac}" ]; then eend 1 "Failed to set MAC address" return 1 fi diff --git a/net/system.sh b/net/system.sh index f0472d0a..c44e7099 100644 --- a/net/system.sh +++ b/net/system.sh @@ -57,7 +57,7 @@ _system_dns() { [ -n "${domain}" ] && buffer="${buffer}domain ${domain}\n" [ -n "${search}" ] && buffer="${buffer}search ${search}\n" - for x in ${servers} ; do + for x in ${servers}; do buffer="${buffer}nameserver ${x}\n" done @@ -65,7 +65,7 @@ _system_dns() { [ -n "${options}" ] && buffer="${buffer}options ${options}\n" # Support resolvconf if we have it. - if [ -x /sbin/resolvconf ] ; then + if [ -x /sbin/resolvconf ]; then printf "${buffer}" | resolvconf -a "${IFACE}" else printf "${buffer}" > /etc/resolv.conf @@ -84,7 +84,7 @@ _system_ntp() { buffer="${buffer}restrict default noquery notrust nomodify\n" buffer="${buffer}restrict 127.0.0.1\n" - for x in ${servers} ; do + for x in ${servers}; do buffer="${buffer}restrict ${x} nomodify notrap noquery\n" buffer="${buffer}server ${x}\n" done @@ -109,17 +109,17 @@ _system_nis() { buffer="# Generated by net-scripts for interface ${iface}\n" - if [ -n "${domain}" ] ; then + if [ -n "${domain}" ]; then hostname -y "${domain}" - if [ -n "${servers}" ] ; then - for x in ${servers} ; do + if [ -n "${servers}" ]; then + for x in ${servers}; do buffer="${buffer}domain ${domain} server ${x}\n" done else buffer="${buffer}domain ${domain} broadcast\n" fi else - for x in ${servers} ; do + for x in ${servers}; do buffer="${buffer}ypserver ${x}\n" done fi diff --git a/net/wpa_supplicant.sh b/net/wpa_supplicant.sh index 1955905e..77074b0c 100644 --- a/net/wpa_supplicant.sh +++ b/net/wpa_supplicant.sh @@ -39,13 +39,13 @@ wpa_supplicant_depend() { # Only set these functions if not set already # IE, prefer to use iwconfig -if ! type _get_ssid >/dev/null 2>/dev/null ; then +if ! type _get_ssid >/dev/null 2>&1; then _get_ssid() { local timeout=5 ssid= - while [ ${timeout} -gt 0 ] ;do + while [ ${timeout} -gt 0 ]; do ssid=$(wpa_cli -i"${IFACE}" status | sed -n -e 's/^ssid=//p') - if [ -n "${ssid}" ] ; then + if [ -n "${ssid}" ]; then echo "${ssid}" return 0 fi @@ -74,14 +74,14 @@ wpa_supplicant_pre_start() { eval opts=\$wpa_supplicant_${IFVAR} case " ${opts} " in - *" -Dwired "*) ;; + *" -Dwired "*);; *) _is_wireless || return 0;; esac # We don't configure wireless if we're being called from # the background unless we're not currently running if yesno ${IN_BACKGROUND}; then - if service_started_daemon "${SVCNAME}" /sbin/wpa_supplicant ; then + if service_started_daemon "${SVCNAME}" /sbin/wpa_supplicant; then SSID=$(_get_ssid "${IFACE}") SSIDVAR=$(_shell_var "${SSID}") save_options "SSID" "${SSID}" @@ -91,19 +91,19 @@ wpa_supplicant_pre_start() { fi save_options "SSID" "" - ebegin "Starting wpa_supplicant on" "${IFVAR}" + ebegin "Starting wpa_supplicant on ${IFVAR}" - if [ -x /sbin/iwconfig ] ; then + if [ -x /sbin/iwconfig ]; then local x= - for x in txpower rate rts frag ; do + for x in txpower rate rts frag; do iwconfig "${IFACE}" "${x}" auto 2>/dev/null done fi cfgfile=${opts##* -c} - if [ -n "${cfgfile}" -a "${cfgfile}" != "${opts}" ] ; then + if [ -n "${cfgfile}" -a "${cfgfile}" != "${opts}" ]; then case "${cfgfile}" in - " "*) cfgfile=${cfgfile# *} ;; + " "*) cfgfile=${cfgfile# *};; esac cfgfile=${cfgfile%% *} else @@ -116,18 +116,18 @@ wpa_supplicant_pre_start() { opts="${opts} -c ${cfgfile}" fi - if [ ! -f ${cfgfile} ] ; then + if [ ! -f ${cfgfile} ]; then eend 1 "/etc/wpa_supplicant/wpa_supplicant.conf not found" return 1 fi # Work out where the ctrl_interface dir is if it's not specified local ctrl_dir=$(sed -n -e 's/[[:space:]]*#.*//g;s/[[:space:]]*$//g;s/^ctrl_interface=//p' "${cfgfile}") - if [ -z "${ctrl_dir}" ] ; then + if [ -z "${ctrl_dir}" ]; then ctrl_dir=${opts##* -C} - if [ -n "${ctrl_dir}" -a "${ctrl_dir}" != "${opts}" ] ; then + if [ -n "${ctrl_dir}" -a "${ctrl_dir}" != "${opts}" ]; then case "${ctrl_dir}" in - " "*) ctrl_dir=${ctrl_dir# *} ;; + " "*) ctrl_dir=${ctrl_dir# *};; esac ctrl_dir=${ctrl_dir%% *} else @@ -166,7 +166,7 @@ wpa_supplicant_pre_start() { --pidfile "/var/run/wpa_cli-${IFACE}.pid" \ -- -a /etc/wpa_supplicant/wpa_cli.sh -p "${ctrl_dir}" -i "${IFACE}" \ -P "/var/run/wpa_cli-${IFACE}.pid" -B - if eend $? ; then + if eend $?; then ebegin "Backgrounding ..." exit 1 fi @@ -193,14 +193,14 @@ wpa_supplicant_post_stop() { [ $? != 0 ] && return 0 local pidfile="/var/run/wpa_cli-${IFACE}.pid" - if [ -f ${pidfile} ] ; then + if [ -f ${pidfile} ]; then ebegin "Stopping wpa_cli on ${IFACE}" start-stop-daemon --stop --exec "${wpac}" --pidfile "${pidfile}" eend $? fi pidfile="/var/run/wpa_supplicant-${IFACE}.pid" - if [ -f ${pidfile} ] ; then + if [ -f ${pidfile} ]; then ebegin "Stopping wpa_supplicant on ${IFACE}" start-stop-daemon --stop --exec "${wpas}" --pidfile "${pidfile}" eend $? diff --git a/runlevels.mk b/runlevels.mk index cad2ff7e..bb27d5bb 100644 --- a/runlevels.mk +++ b/runlevels.mk @@ -5,13 +5,13 @@ BOOTDIR = $(LEVELDIR)/boot DEFAULTDIR = $(LEVELDIR)/default install: - if ! test -d "$(BOOTDIR)" ; then \ + if ! test -d "$(BOOTDIR)"; then \ $(INSTALL) -d $(BOOTDIR) || exit $$?; \ - for x in $(BOOT); do ln -snf ../../init.d/"$$x" $(BOOTDIR)/"$$x" || exit $$? ; done \ + for x in $(BOOT); do ln -snf ../../init.d/"$$x" $(BOOTDIR)/"$$x" || exit $$?; done \ fi - if ! test -d "$(DEFAULTDIR)" ; then \ + if ! test -d "$(DEFAULTDIR)"; then \ $(INSTALL) -d $(DEFAULTDIR) || exit $$?; \ - for x in $(DEFAULT); do ln -snf ../../init.d/"$$x" $(DEFAULTDIR)/"$$x" || exit $$? ; done \ + for x in $(DEFAULT); do ln -snf ../../init.d/"$$x" $(DEFAULTDIR)/"$$x" || exit $$?; done \ fi all: diff --git a/sh.BSD/init.sh b/sh.BSD/init.sh index f5e4327a..af712181 100755 --- a/sh.BSD/init.sh +++ b/sh.BSD/init.sh @@ -40,7 +40,7 @@ single_user() { # FreeBSD-7 supports tmpfs now :) mount_svcdir() { local dotmp=false release=false - if [ -e "${RC_SVCDIR}"/deptree ] ; then + if [ -e "${RC_SVCDIR}"/deptree ]; then dotmp=true if ! mount -t tmpfs none "${RC_LIBDIR}"/tmp 2>/dev/null; then try mdconfig -a -t malloc -s 1m -u 1 @@ -56,7 +56,7 @@ mount_svcdir() { try newfs -b 4096 -i 1024 -n /dev/md0 try mount -o rw,noexec,nosuid /dev/md0 "${RC_SVCDIR}" fi - if ${dotmp} ; then + if ${dotmp}; then cp -p "${RC_LIBDIR}"/tmp/deptree "${RC_LIBDIR}"/tmp/depconfig \ "${RC_LIBDIR}"/tmp/nettree "${RC_SVCDIR}" 2>/dev/null try umount "${RC_LIBDIR}"/tmp diff --git a/sh.Linux/init-early.sh b/sh.Linux/init-early.sh index 1fcb614e..8e0af34e 100755 --- a/sh.Linux/init-early.sh +++ b/sh.Linux/init-early.sh @@ -26,12 +26,12 @@ # Try and set a font and as early as we can if [ -e /etc/runlevels/"${RC_DEFAULTLEVEL}"/consolefont \ - -o -e /etc/runlevels/"${RC_BOOTLEVEL}"/consolefont ] ; then + -o -e /etc/runlevels/"${RC_BOOTLEVEL}"/consolefont ]; then termencoding="(K" [ -e "${RC_LIBDIR}"/console/unicode ] && termencoding="%G" CONSOLE="${CONSOLE:-/dev/console}" printf "\033%s" "${termencoding}" >"${CONSOLE}" 2>/dev/null - if [ -r "${RC_LIBDIR}"/console/font -a -x /bin/setfont ] ; then + if [ -r "${RC_LIBDIR}"/console/font -a -x /bin/setfont ]; then font="$(cat "${RC_LIBDIR}"/console/font)" [ -c "${CONSOLE}" ] && cons="-C ${CONSOLE}" setfont ${cons} "${RC_LIBDIR}"/console/"${font}" 2>/dev/null diff --git a/sh.Linux/init.sh b/sh.Linux/init.sh index 2d51e8e3..524e7538 100755 --- a/sh.Linux/init.sh +++ b/sh.Linux/init.sh @@ -146,7 +146,7 @@ if [ -e /proc/uptime ]; then unset up fi -if ${mountproc} ; then +if ${mountproc}; then procfs="proc" [ "${RC_UNAME}" = "GNU/kFreeBSD" ] && proc="linprocfs" ebegin "Mounting ${procfs} at /proc" @@ -242,7 +242,7 @@ for x in "devpts /dev/pts 0755 ,gid=5,mode=0620" "tmpfs /dev/shm 1777 ,nodev"; d if [ ! -d "$2" ] && \ [ "${m}" = "devfs" -o "${m}" = "udev" ]; then - mkdir -m "$3" -p "$2" >/dev/null 2>/dev/null || \ + mkdir -m "$3" -p "$2" >/dev/null 2>&1 || \ ewarn "Could not create $2!" fi diff --git a/sh/Makefile b/sh/Makefile index c76d622c..dfac610f 100644 --- a/sh/Makefile +++ b/sh/Makefile @@ -8,9 +8,9 @@ include $(TOPDIR)/default.mk install:: # Handle lib correctly - if test $(LIB) != "lib" ; then \ - sed -i'.bak' -e 's,/lib/,/$(LIB)/,g' $(DESTDIR)/$(RC_LIB)/sh/functions.sh || exit $$? ; \ - rm -f $(DESTDIR)/$(RC_LIB)/sh/functions.sh.bak ; \ - sed -i'.bak' -e 's,/lib/,/$(LIB)/,g' $(DESTDIR)/$(RC_LIB)/sh/rc-functions.sh || exit $$? ; \ - rm -f $(DESTDIR)/$(RC_LIB)/sh/rc-functions.sh.bak ; \ + if test $(LIB) != "lib"; then \ + sed -i'.bak' -e 's,/lib/,/$(LIB)/,g' $(DESTDIR)/$(RC_LIB)/sh/functions.sh || exit $$?; \ + rm -f $(DESTDIR)/$(RC_LIB)/sh/functions.sh.bak; \ + sed -i'.bak' -e 's,/lib/,/$(LIB)/,g' $(DESTDIR)/$(RC_LIB)/sh/rc-functions.sh || exit $$?; \ + rm -f $(DESTDIR)/$(RC_LIB)/sh/rc-functions.sh.bak; \ fi diff --git a/sh/functions.sh b/sh/functions.sh index db09d0b6..0a1ba817 100644 --- a/sh/functions.sh +++ b/sh/functions.sh @@ -51,15 +51,15 @@ dolisting() { local x= y= mylist= mypath="$*" # Here we use file globbing instead of ls to save on forking - for x in ${mypath} ; do + for x in ${mypath}; do [ ! -e "${x}" ] && continue - if [ -L "${x}" -o -f "${x}" ] ; then + if [ -L "${x}" -o -f "${x}" ]; then mylist="${mylist} "${x} - elif [ -d "${x}" ] ; then + elif [ -d "${x}" ]; then [ "${x%/}" != "${x}" ] && x=${x%/} - for y in "${x}"/* ; do + for y in "${x}"/*; do [ -e "${y}" ] && mylist="${mylist} ${y}" done fi @@ -73,12 +73,12 @@ dolisting() { # return 0 if any of the files/dirs are newer than # the reference file # -# EXAMPLE: if is_older_than a.out *.o ; then ... +# EXAMPLE: if is_older_than a.out *.o; then ... is_older_than() { local x= ref="$1" shift - for x in "$@" ; do + for x in "$@"; do [ -e "${x}" ] || continue # We need to check the mtime if it's a directory too as the # contents may have changed. @@ -91,10 +91,10 @@ is_older_than() { uniqify() { local result= - while [ -n "$1" ] ; do + while [ -n "$1" ]; do case " ${result} " in - *" $1 "*) ;; - *) result="${result} $1" ;; + *" $1 "*);; + *) result="${result} $1";; esac shift done @@ -138,17 +138,19 @@ KV_to_int() { } _sanitize_path() { - local IFS=":" p= + local IFS=":" p= path= for p in ${PATH}; do case "${p}" in - /lib/rc/sbin|/bin|/sbin|/usr/bin|/usr/sbin|/usr/local/bin|/usr/local/sbin) ;; - *) printf "%s" ":${p}";; + /lib/rc/sbin|/bin|/sbin|/usr/bin|/usr/sbin|/usr/local/bin|/usr/local/sbin);; + *) path="${path}:${p}";; esac done + + echo "${path}" } # Allow our scripts to support zsh -if [ -n "${ZSH_VERSION}" ] ; then +if [ -n "${ZSH_VERSION}" ]; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which @@ -161,7 +163,7 @@ fi export PATH="/lib/rc/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin$(_sanitize_path "${PATH}")" unset _sanitize_path -for arg in "$@" ; do +for arg in "$@"; do case "${arg}" in --nocolor|--nocolour|-C) export RC_NOCOLOR="yes" diff --git a/sh/gendepends.sh b/sh/gendepends.sh index 12db5a02..eac247dc 100755 --- a/sh/gendepends.sh +++ b/sh/gendepends.sh @@ -51,7 +51,7 @@ depend() { } cd /etc/init.d -for SVCNAME in * ; do +for SVCNAME in *; do [ -x "${SVCNAME}" ] || continue # Only generate dependencies for runscripts @@ -65,14 +65,14 @@ for SVCNAME in * ; do exec 3>&1 1>&2 rc_c=${SVCNAME%%.*} - if [ -n "${rc_c}" -a "${rc_c}" != "${SVCNAME}" ] ; then + if [ -n "${rc_c}" -a "${rc_c}" != "${SVCNAME}" ]; then [ -e /etc/conf.d/"${rc_c}" ] && . /etc/conf.d/"${rc_c}" fi unset rc_c [ -e /etc/conf.d/"${SVCNAME}" ] && . /etc/conf.d/"${SVCNAME}" - if . /etc/init.d/"${SVCNAME}" ; then + if . /etc/init.d/"${SVCNAME}"; then echo "${SVCNAME}" >&3 depend diff --git a/sh/init-common-post.sh b/sh/init-common-post.sh index 850342dd..ce9647dd 100644 --- a/sh/init-common-post.sh +++ b/sh/init-common-post.sh @@ -31,7 +31,7 @@ if [ "${RC_SVCDIR}" != "/" ] && mkdir "${RC_SVCDIR}/.test.$$" 2>/dev/null; then for x in ${RC_SVCDIR:-/lib/rcscripts/init.d}/*; do [ -e "${x}" ] || continue case ${x##*/} in - deptree|ksoftlevel|rc.log) ;; + deptree|ksoftlevel|rc.log);; *) rm -rf "${x}";; esac done diff --git a/sh/init-functions.sh b/sh/init-functions.sh index 400a82b4..7afcf2b1 100644 --- a/sh/init-functions.sh +++ b/sh/init-functions.sh @@ -31,13 +31,13 @@ try() { local errstr local retval=0 - if [ -c /dev/null ] ; then + if [ -c /dev/null ]; then errstr=$(eval $* 2>&1 >/dev/null) else errstr=$(eval $* 2>&1) fi retval=$? - if [ ${retval} -ne 0 ] ; then + if [ ${retval} -ne 0 ]; then #splash "critical" & eend 1 eerror "The \"$*\" command failed with error:" @@ -58,8 +58,8 @@ try() { check_statedir() { [ -z "$1" ] && return 0 - if [ ! -d "$1" ] ; then - if ! mkdir -p "$1" &>/dev/null ; then + if [ ! -d "$1" ]; then + if ! mkdir -p "$1" &>/dev/null; then #splash "critical" & echo eerror "To function properly, \"$1\" needs to exist." @@ -72,7 +72,7 @@ check_statedir() { fi mkdir -p "$1" fi - if [ ! -d "$1" ] ; then + if [ ! -d "$1" ]; then eerror "Please mount your root partition read/write, and execute:" echo eerror " # mkdir -p $1" @@ -36,16 +36,18 @@ description="Configures network interfaces." __IFS=" " _shell_var() { - local rem=$1 c= r= + local rem=$1 c= r= var= while [ -n "${rem}" ]; do r=${rem#?} c=${rem%${r}} case "${c}" in - [a-zA-Z0-9]) printf "%c" "${c}";; - *) printf "_";; + [a-zA-Z0-9]);; + *) c=_;; esac + var=${var}${c} rem=${r} done + echo ${var} } depend() { @@ -56,7 +58,7 @@ depend() { after bootmisc provide net case "${IFACE}" in - lo|lo0) ;; + lo|lo0);; *) after net.lo net.lo0 local prov= @@ -77,7 +79,7 @@ depend() { # Support bash arrays - sigh _get_array() { local _a= - if [ -n "${BASH}" ] ; then + if [ -n "${BASH}" ]; then case "$(declare -p "$1" 2>/dev/null)" in "declare -a "*) eval "set -- \"\${$1[@]}\"" @@ -97,7 +99,7 @@ _get_array() { # Flatten bash arrays to simple strings _flatten_array() { - if [ -n "${BASH}" ] ; then + if [ -n "${BASH}" ]; then case "$(declare -p "$1" 2>/dev/null)" in "declare -a "*) eval "set -- \"\${$1[@]}\"" @@ -128,9 +130,9 @@ _wait_for_carrier() { yesno ${RC_PARALLEL} && efunc=einfo ${efunc} "Waiting for carrier (${timeout} seconds) " - while [ ${timeout} -gt 0 ] ; do + while [ ${timeout} -gt 0 ]; do sleep 1 - if _has_carrier ; then + if _has_carrier; then [ "${efunc}" = "einfon" ] && echo eend 0 return 0 @@ -149,7 +151,7 @@ _netmask2cidr() { local IFS=. for i in $1; do - while [ ${i} != "0" ] ; do + while [ ${i} != "0" ]; do len=$((${len} + ${i} % 2)) i=$((${i} >> 1)) done @@ -161,11 +163,11 @@ _netmask2cidr() { _configure_variables() { local var= v= t= - for var in ${_config_vars} ; do + for var in ${_config_vars}; do local v= - for t in "$@" ; do + for t in "$@"; do eval v=\$${var}_${t} - if [ -n "${v}" ] ; then + if [ -n "${v}" ]; then eval ${var}_${IFVAR}=\$${var}_${t} continue 2 fi @@ -180,11 +182,11 @@ _show_address() { # Basically sorts our modules into order and saves the list _gen_module_list() { local x= f= force=$1 - if ! ${force} && [ -s "${MODULESLIST}" -a "${MODULESLIST}" -nt "${MODULESDIR}" ] ; then + if ! ${force} && [ -s "${MODULESLIST}" -a "${MODULESLIST}" -nt "${MODULESDIR}" ]; then local update=false - for x in "${MODULESDIR}"/* ; do + for x in "${MODULESDIR}"/*; do [ -e "${x}" ] || continue - if [ "${x}" -nt "${MODULESLIST}" ] ; then + if [ "${x}" -nt "${MODULESLIST}" ]; then update=true break fi @@ -202,13 +204,13 @@ _gen_module_list() { before() { local mod=${MODULE} local MODULE= - for MODULE in "$@" ; do + for MODULE in "$@"; do after "${mod}" done } program() { - if [ "$1" = "start" -o "$1" = "stop" ] ; then + if [ "$1" = "start" -o "$1" = "stop" ]; then local s="$1" shift eval ${MODULE}_program_${s}="\"\${${MODULE}_program_${s}}\${${MODULE}_program_${s}:+ }$*\"" @@ -220,12 +222,12 @@ _gen_module_list() { provide() { eval ${MODULE}_provide="\"\${${MODULE}_provide}\${${MODULE}_provide:+ }$*\"" local x - for x in $* ; do + for x in $*; do eval ${x}_providedby="\"\${${MODULE}_providedby}\${${MODULE}_providedby:+ }${MODULE}\"" done } - for MODULE in "${MODULESDIR}"/* ; do + for MODULE in "${MODULESDIR}"/*; do sh -n "${MODULE}" || continue . "${MODULE}" || continue MODULE=${MODULE#${MODULESDIR}/} @@ -238,15 +240,15 @@ _gen_module_list() { SORTED= visit() { case " ${VISITED} " in - *" $1 "*) return ;; + *" $1 "*) return;; esac VISITED="${VISITED} $1" eval AFTER=\$${1}_after - for MODULE in ${AFTER} ; do + for MODULE in ${AFTER}; do eval PROVIDEDBY=\$${MODULE}_providedby - if [ -n "${PROVIDEDBY}" ] ; then - for MODULE in ${PROVIDEDBY} ; do + if [ -n "${PROVIDEDBY}" ]; then + for MODULE in ${PROVIDEDBY}; do visit "${MODULE}" done else @@ -255,7 +257,7 @@ _gen_module_list() { done eval PROVIDE=\$${1}_provide - for MODULE in ${PROVIDE} ; do + for MODULE in ${PROVIDE}; do visit "${MODULE}" done @@ -263,13 +265,13 @@ _gen_module_list() { [ -z "${PROVIDEDBY}" ] && SORTED="${SORTED} $1" } - for MODULE in ${MODULES} ; do + for MODULE in ${MODULES}; do visit "${MODULE}" done printf "" > "${MODULESLIST}" i=0 - for MODULE in ${SORTED} ; do + for MODULE in ${SORTED}; do eval PROGRAM=\$${MODULE}_program eval PROGRAM_START=\$${MODULE}_program_start eval PROGRAM_STOP=\$${MODULE}_program_stop @@ -292,56 +294,56 @@ _load_modules() { # Ensure our list is up to date _gen_module_list false - if ! . "${MODULESLIST}" ; then + if ! . "${MODULESLIST}"; then _gen_module_list true . "${MODULESLIST}" fi MODULES= - if [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ] ; then + if [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then eval mymods=\$modules_${IFVAR} [ -z "${mymods}" ] && mymods=${modules} fi local i=-1 x= mod= f= provides= - while true ; do + while true; do i=$((${i} + 1)) eval mod=\$module_${i} [ -z "${mod}" ] && break [ -e "${MODULESDIR}/${mod}.sh" ] || continue eval set -- \$module_${i}_program - if [ -n "$1" ] ; then + if [ -n "$1" ]; then x= - for x in "$@" ; do + for x in "$@"; do [ -x "${x}" ] && break done [ -x "${x}" ] || continue fi - if ${starting} ; then + if ${starting}; then eval set -- \$module_${i}_program_start else eval set -- \$module_${i}_program_stop fi - if [ -n "$1" ] ; then + if [ -n "$1" ]; then x= - for x in "$@" ; do + for x in "$@"; do [ -x "${x}" ] && break done [ -x "${x}" ] || continue fi eval provides=\$module_${i}_provide - if ${starting} ; then + if ${starting}; then case " ${mymods} " in - *" !${mod} "*) continue ;; - *" !${provides} "*) [ -n "${provides}" ] && continue ;; + *" !${mod} "*) continue;; + *" !${provides} "*) [ -n "${provides}" ] && continue;; esac fi MODULES="${MODULES}${MODULES:+ }${mod}" # Now load and wrap our functions - if ! . "${MODULESDIR}/${mod}.sh" ; then + if ! . "${MODULESDIR}/${mod}.sh"; then eend 1 "${SVCNAME}: error loading module \`${mod}'" exit 1 fi @@ -350,8 +352,8 @@ _load_modules() { # Wrap our provides local f= - for f in pre_start start post_start ; do - eval "${provides}_${f}() { type ${mod}_${f} >/dev/null 2>/dev/null || return 0; ${mod}_${f} \"\$@\"; }" + for f in pre_start start post_start; do + eval "${provides}_${f}() { type ${mod}_${f} >/dev/null 2>&1 || return 0; ${mod}_${f} \"\$@\"; }" done eval module_${mod}_provides="${provides}" @@ -359,13 +361,13 @@ _load_modules() { done # Wrap our preferred modules - for mod in ${mymods} ; do + for mod in ${mymods}; do case " ${MODULES} " in *" ${mod} "*) eval x=\$module_${mod}_provides [ -z "${x}" ] && continue - for f in pre_start start post_start ; do - eval "${x}_${f}() { type ${mod}_${f} >/dev/null 2>/dev/null || return 0; ${mod}_${f} \"\$@\"; }" + for f in pre_start start post_start; do + eval "${x}_${f}() { type ${mod}_${f} >/dev/null 2>&1 || return 0; ${mod}_${f} \"\$@\"; }" done eval module_${x}_providedby="${mod}" ;; @@ -376,17 +378,17 @@ _load_modules() { # Otherwise reverse the list local LIST="${MODULES}" p= MODULES= - if ${starting} ; then - for mod in ${LIST} ; do + if ${starting}; then + for mod in ${LIST}; do eval x=\$module_${mod}_provides - if [ -n "${x}" ] ; then + if [ -n "${x}" ]; then eval p=\$module_${x}_providedby [ "${mod}" != "${p}" ] && continue fi MODULES="${MODULES}${MODULES:+ }${mod}" done else - for mod in ${LIST} ; do + for mod in ${LIST}; do MODULES="${mod}${MODULES:+ }${MODULES}" done fi @@ -398,11 +400,11 @@ _load_config() { local config="$(_get_array "config_${IFVAR}")" local fallback="$(_get_array fallback_${IFVAR})" - if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ] ; then + if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then [ "${config}" != "null" ] && config="127.0.0.1/8 ${config}" else - if [ -z "${config}" ] ; then + if [ -z "${config}" ]; then ewarn "No configuration specified; defaulting to DHCP" config="dhcp" fi @@ -438,7 +440,7 @@ start() { einfo "Bringing up interface ${IFACE}" eindent - if [ -z "${MODULES}" ] ; then + if [ -z "${MODULES}" ]; then local MODULES= _load_modules true fi @@ -446,7 +448,7 @@ start() { # We up the iface twice if we have a preup to ensure it's up if # available in preup and afterwards incase the user inadvertently # brings it down - if type preup >/dev/null 2>/dev/null ; then + if type preup >/dev/null 2>&1; then _up 2>/dev/null ebegin "Running preup" eindent @@ -456,23 +458,23 @@ start() { _up 2>/dev/null - for module in ${MODULES} ; do - if type "${module}_pre_start" >/dev/null 2>/dev/null ; then - if ! ${module}_pre_start ; then + for module in ${MODULES}; do + if type "${module}_pre_start" >/dev/null 2>&1; then + if ! ${module}_pre_start; then eend 1 exit 1 fi fi done - if ! _exists ; then + if ! _exists; then eerror "ERROR: interface ${IFACE} does not exist" eerror "Ensure that you have loaded the correct kernel module for your hardware" return 1 fi - if ! _wait_for_carrier ; then - if service_started devd ; then + if ! _wait_for_carrier; then + if service_started devd; then ewarn "no carrier, but devd will start us when we have one" mark_service_inactive "${SVCNAME}" else @@ -485,13 +487,13 @@ start() { _load_config config_index=0 - if [ -n "${our_metric}" ] ; then + if [ -n "${our_metric}" ]; then metric=${our_metric} - elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ] ; then + elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then metric=$((${metric} + $(_ifindex))) fi - while true ; do + while true; do eval config=\$config_${config_index} [ -z "${config}" ] && break @@ -500,26 +502,26 @@ start() { eindent case "$1" in noop) - if [ -n "$(_get_inet_address)" ] ; then + if [ -n "$(_get_inet_address)" ]; then oneworked=true break fi ;; - null) : ;; - [0-9]*|*:*) _add_address ${config} ;; + null) :;; + [0-9]*|*:*) _add_address ${config};; *) - if type "${config}_start" >/dev/null 2>/dev/null ; then + if type "${config}_start" >/dev/null 2>&1; then "${config}"_start else eerror "nothing provides \`${config}'" fi ;; esac - if eend $? ; then + if eend $?; then oneworked=true else eval config=\$fallback_${config_index} - if [ -n "${config}" ] ; then + if [ -n "${config}" ]; then eoutdent ewarn "Trying fallback configuration ${config}" eindent @@ -532,8 +534,8 @@ start() { config_index=$((${config_index} + 1)) done - if ! ${oneworked} ; then - if type failup >/dev/null 2>/dev/null ; then + if ! ${oneworked}; then + if type failup >/dev/null 2>&1; then ebegin "Running failup" eindent failup @@ -544,7 +546,7 @@ start() { local hidefirstroute=false first=true local routes="$(_get_array "routes_${IFVAR}")" - if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ] ; then + if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then if [ "${config_0}" != "null" ]; then routes="127.0.0.0/8 via 127.0.0.1 ${routes}" @@ -562,14 +564,14 @@ ${routes}" ebegin ${cmd} # Work out if we're a host or a net if not told case ${cmd} in - *" -net "*|*" -host "*) ;; - *" netmask "*) cmd="-net ${cmd}" ;; - *.*.*.*/32) cmd="-host ${cmd}" ;; - *.*.*.*/*|0.0.0.0|default) cmd="-net ${cmd}" ;; - *) cmd="-host ${cmd}" ;; + *" -net "*|*" -host "*);; + *" netmask "*) cmd="-net ${cmd}";; + *.*.*.*/32) cmd="-host ${cmd}";; + *.*.*.*/*|0.0.0.0|default) cmd="-net ${cmd}";; + *) cmd="-host ${cmd}";; esac - if ${hidefirstroute} ; then - _add_route ${cmd} >/dev/null 2>/dev/null + if ${hidefirstroute}; then + _add_route ${cmd} >/dev/null 2>&1 hidefirstroute=false else _add_route ${cmd} >/dev/null @@ -579,16 +581,16 @@ ${routes}" done unset IFS - for module in ${MODULES} ; do - if type "${module}_post_start" >/dev/null 2>/dev/null ; then - if ! ${module}_post_start ; then + for module in ${MODULES}; do + if type "${module}_post_start" >/dev/null 2>&1; then + if ! ${module}_post_start; then eend 1 exit 1 fi fi done - if type postup >/dev/null 2>/dev/null ; then + if type postup >/dev/null 2>&1; then ebegin "Running postup" eindent postup @@ -605,12 +607,12 @@ stop() { einfo "Bringing down interface ${IFACE}" eindent - if [ -z "${MODULES}" ] ; then + if [ -z "${MODULES}" ]; then local MODULES= _load_modules false fi - if type predown >/dev/null 2>/dev/null ; then + if type predown >/dev/null 2>&1; then ebegin "Running predown" eindent predown || return 1 @@ -622,28 +624,28 @@ stop() { fi fi - for module in ${MODULES} ; do - if type "${module}_pre_stop" >/dev/null 2>/dev/null ; then - if ! ${module}_pre_stop ; then + for module in ${MODULES}; do + if type "${module}_pre_stop" >/dev/null 2>&1; then + if ! ${module}_pre_stop; then eend 1 exit 1 fi fi done - for module in ${MODULES} ; do - if type "${module}_stop" >/dev/null 2>/dev/null ; then + for module in ${MODULES}; do + if type "${module}_stop" >/dev/null 2>&1; then ${module}_stop fi done # Only delete addresses for non PPP interfaces - if ! type is_ppp >/dev/null 2>/dev/null || ! is_ppp ; then + if ! type is_ppp >/dev/null 2>&1 || ! is_ppp; then _delete_addresses "${IFACE}" fi - for module in ${MODULES} ; do - if type "${module}_post_stop" >/dev/null 2>/dev/null ; then + for module in ${MODULES}; do + if type "${module}_post_stop" >/dev/null 2>&1; then ${module}_post_stop fi done @@ -654,7 +656,7 @@ stop() { type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" - if type postdown >/dev/null 2>/dev/null ; then + if type postdown >/dev/null 2>&1; then ebegin "Running postdown" eindent postdown diff --git a/sh/rc-functions.sh b/sh/rc-functions.sh index 571a0cf1..b6c7cbd8 100755 --- a/sh/rc-functions.sh +++ b/sh/rc-functions.sh @@ -63,7 +63,7 @@ is_net_fs() { is_union_fs() { [ ! -x /sbin/unionctl ] && return 1 - unionctl "$1" --list >/dev/null 2>/dev/null + unionctl "$1" --list >/dev/null 2>&1 } get_bootparam() { @@ -89,8 +89,8 @@ get_bootparam() { # Add our sbin to $PATH case "${PATH}" in - /lib/rc/sbin|/lib/rc/sbin:*) ;; - *) export PATH="/lib/rc/sbin:${PATH}" ;; + /lib/rc/sbin|/lib/rc/sbin:*);; + *) export PATH="/lib/rc/sbin:${PATH}";; esac # vim: set ts=4 : diff --git a/sh/rc-help.sh b/sh/rc-help.sh index a7177485..f2345708 100755 --- a/sh/rc-help.sh +++ b/sh/rc-help.sh @@ -34,19 +34,19 @@ else fi myscript=$1 -if [ -z "${myscript}" ] ; then +if [ -z "${myscript}" ]; then echo "Please execute an init.d script" exit 1 fi -if [ -L "${myscript}" ] ; then +if [ -L "${myscript}" ]; then SERVICE=$(readlink "${myscript}") else SERVICE=${myscript} fi SERVICE=${SERVICE##*/} -if [ "$2" = "help" ] ; then +if [ "$2" = "help" ]; then BE_VERBOSE="yes" NL="\n" else @@ -55,7 +55,7 @@ else fi default_commands="describe help start status stop restart zap" -extra_commands="$(. "${myscript}" 2>/dev/null ; echo "${extra_commands:-${opts}}")" +extra_commands="$(. "${myscript}" 2>/dev/null; echo "${extra_commands:-${opts}}")" printf "Usage: ${CYAN}${SERVICE}${OFF} [ ${GREEN}flags${OFF} ] < ${GREEN}options${OFF} > @@ -121,7 +121,7 @@ printf " ${GREEN}${default_commands}${OFF} fi -if [ -n "${extra_commands}" ] ; then +if [ -n "${extra_commands}" ]; then printf " ${CYAN}Additional Options:${OFF}${NL} ${GREEN}${extra_commands}${OFF} diff --git a/sh/rc-mount.sh b/sh/rc-mount.sh index 2f85cbf0..19f469e0 100644 --- a/sh/rc-mount.sh +++ b/sh/rc-mount.sh @@ -32,7 +32,7 @@ do_unmount() { local cmd="$1" retval=0 retry= local f_opts="-m -c" f_kill="-s " mnt= - if [ "${RC_UNAME}" = "Linux" ] ; then + if [ "${RC_UNAME}" = "Linux" ]; then f_opts="-m" f_kill="-" fi @@ -57,24 +57,24 @@ do_unmount() { esac retry=3 - while ! LC_ALL=C ${cmd} "${mnt}" 2>/dev/null ; do + while ! LC_ALL=C ${cmd} "${mnt}" 2>/dev/null; do # Don't kill if it's us (/ and possibly /usr) local pids="$(fuser ${f_opts} "${mnt}" 2>/dev/null)" case " ${pids} " in - *" $$ "*) retry=0 ;; - " ") eend 1 "in use but fuser finds nothing"; retry=0 ;; + *" $$ "*) retry=0;; + " ") eend 1 "in use but fuser finds nothing"; retry=0;; *) local sig="KILL" [ ${retry} -gt 0 ] && sig="TERM" fuser ${f_kill}${sig} -k ${f_opts} "${mnt}" \ - >/dev/null 2>/dev/null + >/dev/null 2>&1 sleep 1 retry=$((${retry} - 1)) ;; esac # OK, try forcing things - if [ ${retry} -le 0 ] ; then + if [ ${retry} -le 0 ]; then case "${cmd}" in umount*) LC_ALL=C ${cmd} -f "${mnt}" || retry=-999 @@ -86,7 +86,7 @@ do_unmount() { break fi done - if [ ${retry} -eq -999 ] ; then + if [ ${retry} -eq -999 ]; then eend 1 retval=1 else diff --git a/src/Makefile b/src/Makefile index 3f2b6ac6..d36f5144 100644 --- a/src/Makefile +++ b/src/Makefile @@ -150,9 +150,9 @@ install:: $(TARGET) for x in $(SBINLINKS); do ln -sf rc $(DESTDIR)/sbin/$$x; done for x in $(RC_BINLINKS); do ln -sf ../../../sbin/rc $(DESTDIR)/$(RC_LIB)/bin/$$x; done for x in $(RC_SBINLINKS); do ln -sf ../../../sbin/rc $(DESTDIR)/$(RC_LIB)/sbin/$$x; done - if test "$(PAM)" = "pam" ; then \ - install -d $(DESTDIR)/etc/pam.d ; \ - install -m 0644 start-stop-daemon.pam $(DESTDIR)/etc/pam.d/start-stop-daemon ; \ + if test "$(PAM)" = "pam"; then \ + install -d $(DESTDIR)/etc/pam.d; \ + install -m 0644 start-stop-daemon.pam $(DESTDIR)/etc/pam.d/start-stop-daemon; \ fi clean-links: diff --git a/src/start-stop-daemon.c b/src/start-stop-daemon.c index 31752fb5..26ad8bd6 100644 --- a/src/start-stop-daemon.c +++ b/src/start-stop-daemon.c @@ -67,7 +67,7 @@ #include <security/pam_appl.h> /* We are not supporting authentication conversations */ -static struct pam_conv conv = { NULL, NULL} ; +static struct pam_conv conv = { NULL, NULL}; #endif #include "builtins.h" diff --git a/src/test/symbols.sh b/src/test/symbols.sh index 9d1138f1..a6a66fcd 100755 --- a/src/test/symbols.sh +++ b/src/test/symbols.sh @@ -10,7 +10,7 @@ export LD_LIBRARY_PATH=${builddir}:${LD_LIBRARY_PATH} export PATH=${builddir}:${PATH} checkit() { - local base=$1 ; shift + local base=$1; shift echo "$@" | tr ' ' '\n' > ${base}.out diff -u ${base}.list ${base}.out eend $? diff --git a/support/openvpn/up.sh b/support/openvpn/up.sh index b8294a0c..4fa58368 100755 --- a/support/openvpn/up.sh +++ b/support/openvpn/up.sh @@ -62,7 +62,7 @@ done if [ -n "${NS}" ]; then DNS="# Generated by openvpn for interface ${dev}\n" - if [ -n "${SEARCH}" ] ; then + if [ -n "${SEARCH}" ]; then DNS="${DNS}search ${DOMAIN} ${SEARCH}\n" else DNS="${DNS}domain ${DOMAIN}\n" @@ -72,7 +72,7 @@ if [ -n "${NS}" ]; then printf "${DNS}" | resolvconf -a "${dev}" else # Preserve the existing resolv.conf - if [ -e /etc/resolv.conf ] ; then + if [ -e /etc/resolv.conf ]; then cp -p /etc/resolv.conf /etc/resolv.conf-"${dev}".sv fi (umask 022; printf "${DNS}" > /etc/resolv.conf) |