aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--init.d.misc/avahi-dnsconfd.in2
-rw-r--r--init.d.misc/avahid.in2
-rw-r--r--init.d.misc/dhcpcd.in1
-rw-r--r--init.d.misc/dnsmasq.in6
-rw-r--r--init.d.misc/hald.in2
-rw-r--r--init.d.misc/named.in73
-rw-r--r--init.d.misc/ntpd.in29
-rw-r--r--init.d.misc/openvpn.in38
-rw-r--r--init.d.misc/polkitd.in2
-rw-r--r--init.d.misc/sshd.in4
-rw-r--r--init.d.misc/wpa_supplicant.in15
11 files changed, 88 insertions, 86 deletions
diff --git a/init.d.misc/avahi-dnsconfd.in b/init.d.misc/avahi-dnsconfd.in
index 8153f0c4..257f7606 100644
--- a/init.d.misc/avahi-dnsconfd.in
+++ b/init.d.misc/avahi-dnsconfd.in
@@ -3,7 +3,7 @@
# All rights reserved. Released under the 2-clause BSD license.
command=@PKG_PREFIX@/sbin/avahi-dnsconfd
-command_args="${avahi_dnsconfd_args} -D"
+command_args="$avahi_dnsconfd_args -D"
pidfile=@VARBASE@/run/avahi-dnsconfd.pid
name="Avahi DNS Configuration Daemon"
diff --git a/init.d.misc/avahid.in b/init.d.misc/avahid.in
index 458fc0bc..b035d594 100644
--- a/init.d.misc/avahid.in
+++ b/init.d.misc/avahid.in
@@ -3,7 +3,7 @@
# All rights reserved. Released under the 2-clause BSD license.
command=@PKG_PREFIX@/sbin/avahi-daemon
-command_args="${avahid_args} -D"
+command_args="$avahid_args -D"
pidfile=@VARBASE@/run/avahi-daemon/pid
name="Avahi Service Advertisement Daemon"
diff --git a/init.d.misc/dhcpcd.in b/init.d.misc/dhcpcd.in
index 40234cfe..91f0110c 100644
--- a/init.d.misc/dhcpcd.in
+++ b/init.d.misc/dhcpcd.in
@@ -14,4 +14,5 @@ depend()
use logger
after bootmisc modules
before dns
+ keyword noshutdown
}
diff --git a/init.d.misc/dnsmasq.in b/init.d.misc/dnsmasq.in
index 02e146c1..8b11de86 100644
--- a/init.d.misc/dnsmasq.in
+++ b/init.d.misc/dnsmasq.in
@@ -3,7 +3,7 @@
# All rights reserved. Released under the 2-clause BSD license.
command=@PKG_PREFIX@/sbin/dnsmasq
-command_args=${dnsmasq_args}
+command_args=$dnsmasq_args
pidfile=@VARBASE@/run/dnsmasq.pid
required_files=/etc/dnsmasq.conf
@@ -18,7 +18,7 @@ depend()
reload()
{
- ebegin "Reloading ${RC_SVCNAME}"
- start-stop-daemon --signal SIGHUP --pidfile "${pidfile}"
+ ebegin "Reloading $RC_SVCNAME"
+ start-stop-daemon --signal SIGHUP --pidfile "$pidfile"
eend $?
}
diff --git a/init.d.misc/hald.in b/init.d.misc/hald.in
index dd7802d1..25c03a84 100644
--- a/init.d.misc/hald.in
+++ b/init.d.misc/hald.in
@@ -4,7 +4,7 @@
command=@PKG_PREFIX@/sbin/hald
pidfile=@VARBASE@/run/hald/hald.pid
-command_args="${hald_args}"
+command_args=$hald_args
name="Hardware Abstraction Layer Daemon"
depend()
diff --git a/init.d.misc/named.in b/init.d.misc/named.in
index 3674442d..6088f43f 100644
--- a/init.d.misc/named.in
+++ b/init.d.misc/named.in
@@ -3,14 +3,14 @@
# All rights reserved. Released under the 2-clause BSD license.
command=/usr/sbin/named
-command_args=${named_args}
+command_args=$named_args
pidfile=@VARBASE@/run/named.pid
name="Domain Name server"
extra_started_commands="reload"
namedb=/etc/namedb
uid=named
-case "${RC_UNAME}" in
+case "$RC_UNAME" in
FreeBSD)
uid=bind
pidfile=@VARBASE@/run/named/pid
@@ -19,7 +19,7 @@ case "${RC_UNAME}" in
uid=bind
;;
esac
-named_uid=${named_uid:-${uid}}
+: ${named_uid:=${uid}}
depend()
{
@@ -30,68 +30,71 @@ depend()
start_pre()
{
- if [ -n "${named_chroot}" ]; then
+ if [ -n "$named_chroot" ]; then
# Create (or update) the chroot directory structure
if [ -r /etc/mtree/BIND.chroot.dist ]; then
- mtree -deU -f /etc/mtree/BIND.chroot.dist -p "${named_chroot}"
+ mtree -deU -f /etc/mtree/BIND.chroot.dist -p "$named_chroot"
else
ewarn "/etc/mtree/BIND.chroot.dist missing,"
ewarn "chroot directory structure not updated"
fi
- if [ ! -d "${named_chroot}"/. ]; then
- eerror "chroot directory ${named_chroot} missing"
+ if [ ! -d "$named_chroot"/. ]; then
+ eerror "chroot directory $named_chroot missing"
exit 1
fi
# Create /etc/namedb symlink
- if [ ! -L "${namedb}" ]; then
- if [ -d "${namedb}" ]; then
- ewarn "named chroot: ${namedb} is a directory!"
- elif [ -e "${namedb}" ]; then
- ewarn "named chroot: ${namedb} exists!"
+ if [ ! -L "$namedb" ]; then
+ if [ -d "$namedb" ]; then
+ ewarn "named chroot: $namedb is a directory!"
+ elif [ -e "$namedb" ]; then
+ ewarn "named chroot: $namedb exists!"
else
- ln -s "${named_chroot}${namedb}" "${namedb}"
+ ln -s "$named_chroot$namedb" "$namedb"
fi
else
# Make sure it points to the right place.
- ln -shf "${named_chroot}${namedb}" "${namedb}"
+ ln -shf "$named_chroot$namedb" "$namedb"
fi
- case "${RC_UNAME}" in
+ case "$RC_UNAME" in
*BSD|DragonFly)
# Mount a devfs in the chroot directory if needed
- umount "${named_chroot}"/dev 2>/dev/null
- mount -t devfs dev "${named_chroot}"/dev
- devfs -m "${named_chroot}"/dev ruleset devfsrules_hide_all
- devfs -m "${named_chroot}"/dev rule apply path null unhide
- devfs -m "${named_chroot}"/dev rule apply path random unhide
+ umount "$named_chroot"/dev 2>/dev/null
+ mount -t devfs dev "$named_chroot"/dev
+ devfs -m "$named_chroot"/dev \
+ ruleset devfsrules_hide_all
+ devfs -m "$named_chroot"/dev \
+ rule apply path null unhide
+ devfs -m "$named_chroot"/dev \
+ rule apply path random unhide
;;
esac
# Copy local timezone information if it is not up to date.
if [ -r /etc/localtime ]; then
- cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
- cp -p /etc/localtime "${named_chroot}/etc/localtime"
+ cmp -s /etc/localtime "$named_chroot/etc/localtime" ||
+ cp -p /etc/localtime "$named_chroot/etc/localtime"
fi
- command_args="${command_args} -t ${named_chroot}"
+ command_args="$command_args -t $named_chroot"
- ln -fs "${named_chroot}${pidfile}" "${pidfile}"
+ ln -fs "$named_chroot$pidfile" "$pidfile"
fi
- if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
- local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
- -c ${named_chrootdir}/etc/namedb/rndc.key"
- if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
+ if [ ! -s "$named_chroot$namedb/rndc.conf" ]; then
+ local confgen="${command%/named}/rndc-confgen -a -b256 -u $named_uid \
+ -c $named_chrootdir/etc/namedb/rndc.key"
+ if [ -s "$named_chroot$namedb/rndc.key" ]; then
local getuser="stat -f%Su"
- [ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"
- case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in
- root|"${named_uid}");;
- *) ${confgen};;
+ [ "$RC_UNAME" = Linux ] && getuser="stat -c%U"
+ case $(${getuser} "$named_chroot$namedb"/rndc.key) in
+ root|"$named_uid");;
+ *) $confgen;;
esac
else
- ${confgen}
+ $confgen
fi
fi
}
@@ -103,7 +106,7 @@ reload()
stop_post()
{
- if [ -n "${named_chroot}" -a -c "${named_chroot}"/dev/null ]; then
- umount "${named_chroot}"/dev 2>/dev/null || true
+ if [ -n "$named_chroot" -a -c "$named_chroot"/dev/null ]; then
+ umount "$named_chroot"/dev 2>/dev/null || true
fi
}
diff --git a/init.d.misc/ntpd.in b/init.d.misc/ntpd.in
index 70393239..aec0b67e 100644
--- a/init.d.misc/ntpd.in
+++ b/init.d.misc/ntpd.in
@@ -1,13 +1,14 @@
#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2009 Roy Marples <roy@marples.name>
# All rights reserved. Released under the 2-clause BSD license.
-ntpd_config=${ntpd_config:-/etc/ntp.conf}
-ntpd_drift=${ntpd_drift:-/var/db/ntpd.drift}
+: ${ntpd_config:=/etc/ntp.conf}
+: ${ntpd_drift:=/var/db/ntpd.drift}
command=/usr/sbin/ntpd
+required_files=$ntpd_config
pidfile=/var/run/ntpd.pid
-command_args="${ntpd_args} -c ${ntpd_config} -f ${ntpd_drift} -p ${pidfile}"
+command_args="$ntpd_args -c $ntpd_config -f $ntpd_drift -p $pidfile"
name="Network Time Protocol Daemon"
depend()
@@ -19,22 +20,18 @@ depend()
start_pre()
{
- if [ ! -r "${ntpd_config}" ]; then
- eerror "${ntpd_config} is not readable"
- return 1
- fi
-
- if [ -n "${ntpd_chroot}" ]; then
- case "${RC_UNAME}" in
+ if [ -n "$ntpd_chroot" ]; then
+ case "$RC_UNAME" in
*BSD|DragonFly)
- if [ ! -c "${ntpd_chroot}/dev/clockctl" ]; then
- rm -f "${ntpd_chroot}/dev/clockctl"
- (cd /dev; /bin/pax -rw -pe clockctl "${ntpd_chroot}/dev")
+ if [ ! -c "$ntpd_chroot/dev/clockctl" ]; then
+ rm -f "$ntpd_chroot/dev/clockctl"
+ (cd /dev; /bin/pax -rw -pe clockctl \
+ "$ntpd_chroot/dev")
fi
;;
esac
- ln -fs "${ntpd_chroot}${ntpd_drift}" "${ntpd_drift}"
+ ln -fs "$ntpd_chroot$ntpd_drift" "$ntpd_drift"
- command_args="${command_args} -u ntpd:ntpd -i ${ntpd_chroot}"
+ command_args="$command_args -u ntpd:ntpd -i $ntpd_chroot"
fi
}
diff --git a/init.d.misc/openvpn.in b/init.d.misc/openvpn.in
index 4f60b83a..55ff1f76 100644
--- a/init.d.misc/openvpn.in
+++ b/init.d.misc/openvpn.in
@@ -4,28 +4,29 @@
vpn=${RC_SVCNAME#*.}
name="OpenVPN"
-[ "${vpn}" != "openvpn" ] && name="${name} (${vpn})"
+[ "$vpn" != openvpn ] && name="$name ($vpn)"
command=@PKG_PREFIX@/sbin/openvpn
-pidfile=@VARBASE@/run/"${RC_SVCNAME}".pid
-openvpn_dir=${openvpn_dir:-@PKG_PREFIX@/etc/openvpn}
-openvpn_config=${openvpn_config:-${openvpn_dir}/${vpn}.conf}
-command_args="${openvpn_args} --daemon --config ${openvpn_config} --writepid ${pidfile}"
-required_dirs="${openvpn_dir}"
-required_files="${openvpn_config}"
+pidfile=@VARBASE@/run/"$RC_SVCNAME".pid
+: ${openvpn_dir:=@PKG_PREFIX@/etc/openvpn}
+: ${openvpn_config:=$openvpn_dir/$vpn.conf}
+command_args="$openvpn_args --daemon --config $openvpn_config"
+command_args="$command_args --writepid $pidfile"
+required_dirs=$openvpn_dir
+required_files=$openvpn_config
# If we're an openvpn client, then supply a nice default config
# You can find sample up/down scripts in the OpenRC support/openvpn dir
-if yesno "${openvpn_client}"; then
- openvpn_up=${openvpn_up:-${openvpn_dir}/up.sh}
- openvpn_down=${openvpn_down:-${openvpn_dir}/down.sh}
- command_args="${command_args} --nobind --up-delay --up-restart --down-pre"
- command_args="${command_args} --up ${openvpn_up}"
- command_args="${command_args} --down ${openvpn_down}"
- required_files="${required_files} ${openvpn_up} ${openvpn_down}"
+if yesno $openvpn_client; then
+ : ${openvpn_up:=${openvpn_dir}/up.sh}
+ : ${openvpn_down:=${openvpn_dir}/down.sh}
+ command_args="$command_args --nobind --up-delay --up-restart --down-pre"
+ command_args="$command_args --up $openvpn_up"
+ command_args="$command_args --down $openvpn_down"
+ required_files="$required_files $openvpn_up $openvpn_down"
in_background_fake="start stop"
- start_inactive="YES"
+ start_inactive=YES
fi
depend()
@@ -38,7 +39,7 @@ depend()
start_pre()
{
# Linux has good dynamic tun/tap creation
- if [ "${RC_UNAME}" = "Linux" ]; then
+ if [ "$RC_UNAME" = Linux ]; then
if [ ! -e /dev/net/tun ]; then
if ! modprobe tun; then
eerror "TUN/TAP support is not available in this kernel"
@@ -60,8 +61,7 @@ start_pre()
fi
# If the config file does not specify the cd option, we do
- # But if we specify it, we override the config option which we do not want
- if ! grep -q "^[ \t]*cd[ \t].*" "${openvpn_config}"; then
- command_args="${command_args} --cd ${openvpn_dir}"
+ if ! grep -q "^[ \t]*cd[ \t].*" "$openvpn_config"; then
+ command_args="$command_args --cd $openvpn_dir"
fi
}
diff --git a/init.d.misc/polkitd.in b/init.d.misc/polkitd.in
index a1736a98..13415f23 100644
--- a/init.d.misc/polkitd.in
+++ b/init.d.misc/polkitd.in
@@ -4,7 +4,7 @@
command=@PKG_PREFIX@/sbin/polkitd
pidfile=@VARBASE@/run/polkitd/polkitd.pid
-command_args="${polkitd_args}"
+command_args="$polkitd_args"
name="PolicyKit Daemon"
depend()
diff --git a/init.d.misc/sshd.in b/init.d.misc/sshd.in
index 8c5c8b35..a3722528 100644
--- a/init.d.misc/sshd.in
+++ b/init.d.misc/sshd.in
@@ -3,7 +3,7 @@
# All rights reserved. Released under the 2-clause BSD license.
command=/usr/sbin/sshd
-command_args=${sshd_args}
+command_args=$sshd_args
pidfile=@VARBASE@/run/sshd.pid
required_files=/etc/ssh/sshd_config
@@ -31,5 +31,5 @@ start_pre()
eend $? || return 1
fi
- ${command} -t
+ $command -t
}
diff --git a/init.d.misc/wpa_supplicant.in b/init.d.misc/wpa_supplicant.in
index 951d82f6..7b337ffb 100644
--- a/init.d.misc/wpa_supplicant.in
+++ b/init.d.misc/wpa_supplicant.in
@@ -4,8 +4,8 @@
command=/usr/sbin/wpa_supplicant
wpa_supplicant_conf=/etc/wpa_supplicant.conf
-wpa_supplicant_if=${wpa_supplicant_if:+-i}${wpa_supplicant_if}
-command_args="-B -c${wpa_supplicant_conf} ${wpa_supplicant_if}"
+wpa_supplicant_if=${wpa_supplicant_if:+-i}$wpa_supplicant_if
+command_args="-B -c$wpa_supplicant_conf $wpa_supplicant_if"
name="WPA Supplicant Daemon"
depend()
@@ -14,16 +14,17 @@ depend()
use logger
after bootmisc modules
before dns dhcpcd net
+ keyword noshutdown
}
find_wireless()
{
local iface=
- case "${RC_UNAME}" in
+ case "$RC_UNAME" in
Linux)
for iface in /sys/class/net/*; do
- if [ -e "${iface}"/wireless ]; then
+ if [ -e "$iface"/wireless ]; then
echo "${iface##*/}"
return 0
fi
@@ -49,8 +50,8 @@ append_wireless()
local iface=
iface=$(find_wireless)
- if [ -n "${iface}" ]; then
- command_args="${command_args} -i${iface}"
+ if [ -n "$iface" ]; then
+ command_args="$command_args -i$iface"
else
eerror "Could not find a wireless interface"
fi
@@ -58,7 +59,7 @@ append_wireless()
start_pre()
{
- case " ${command_args}" in
+ case " $command_args" in
*" -i"*) ;;
*) append_wireless;;
esac
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 09:40:38 +0000