Remove gentoo's net.* scripts

It has been determined that it will be best for gentoo's net.* scripts
to be in a separate package to allow independent development.
This package will be called netifrc and maintained by Gentoo.

1 files changed, 0 insertions, 404 deletions

diff --git a/net/iproute2.sh b/net/iproute2.sh
deleted file mode 100644
index 3bab7b74..00000000
--- a/net/iproute2.sh
+++ /dev/null
@@ -1,404 +0,0 @@
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-iproute2_depend()
-{
-	program ip
-	provide interface
-	after ifconfig
-}
-
-_up()
-{
-	ip link set dev "${IFACE}" up
-}
-
-_down()
-{
-	ip link set dev "${IFACE}" down
-}
-
-_exists()
-{
-	[ -e /sys/class/net/"$IFACE" ]
-}
-
-_ifindex()
-{
-	local index=-1
-	local f v
-	if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then
-		index=$(cat /sys/class/net/"${IFACE}"/ifindex)
-	else
-		for f in /sys/class/net/*/ifindex ; do
-			v=$(cat $f)
-			[ $v -gt $index ] && index=$v
-		done
-		: $(( index += 1 ))
-	fi
-	echo "${index}"
-	return 0
-}
-
-_is_wireless()
-{
-	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless -o \
-		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
-
-	[ ! -e /proc/net/wireless ] && return 1
-	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
-}
-
-_set_flag()
-{
-	local flag=$1 opt="on"
-	if [ "${flag#-}" != "${flag}" ]; then
-		flag=${flag#-}
-		opt="off"
-	fi
-	ip link set dev "${IFACE}" "${flag}" "${opt}"
-}
-
-_get_mac_address()
-{
-	local mac=$(LC_ALL=C ip link show "${IFACE}" | sed -n \
-		-e 'y/abcdef/ABCDEF/' \
-		-e '/link\// s/^.*\<\(..:..:..:..:..:..\)\>.*/\1/p')
-
-	case "${mac}" in
-		00:00:00:00:00:00);;
-		44:44:44:44:44:44);;
-		FF:FF:FF:FF:FF:FF);;
-		"");;
-		*) echo "${mac}"; return 0;;
-	esac
-
-	return 1
-}
-
-_set_mac_address()
-{
-	ip link set dev "${IFACE}" address "$1"
-}
-
-_get_inet_addresses()
-{
-	LC_ALL=C ip -family inet addr show "${IFACE}" | \
-	sed -n -e 's/.*inet \([^ ]*\).*/\1/p'
-}
-
-_get_inet_address()
-{
-	set -- $(_get_inet_addresses)
-	[ $# = "0" ] && return 1
-	echo "$1"
-}
-
-_add_address()
-{
-	if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then
-		ip addr add "$@" dev "${IFACE}" 2>/dev/null
-		return 0
-	fi
-	local x
-	local address netmask broadcast peer anycast label scope
-	local valid_lft preferred_lft home nodad
-	local confflaglist
-	address="$1" ; shift
-	while [ -n "$*" ]; do
-		x=$1 ; shift
-		case "$x" in
-			netmask|ne*)
-				netmask="/$(_netmask2cidr "$1")" ; shift ;;
-			broadcast|brd|br*)
-				broadcast="$1" ; shift ;;
-			pointopoint|pointtopoint|peer|po*|pe*)
-				peer="$1" ; shift ;;
-			anycast|label|scope|valid_lft|preferred_lft|a*|l*|s*|v*|pr*)
-				case $x in
-					a*) x=anycast ;;
-					l*) x=label ;;
-					s*) x=scope ;;
-					v*) x=valid_lft ;;
-					pr*) x=preferred_lft ;;
-				esac
-				eval "$x=$1" ; shift ;;
-			home|nodad|h*|no*)
-				case $x in h*) x=home ;; n*) x=nodad ;; esac
-				# FIXME: If we need to reorder these, this will take more code
-				confflaglist="${confflaglist} $x" ; ;;
-			*)
-				ewarn "Unknown argument to config_$IFACE: $x"
-		esac
-	done
-
-	# Always scope lo addresses as host unless specified otherwise
-	if [ "${IFACE}" = "lo" ]; then
-		[ -z "$scope" ] && scope="host"
-	fi
-
-	# figure out the broadcast address if it is not specified
-	# This must NOT be set for IPv6 addresses
-	if [ "${address#*:}" = "${address}" ]; then
-		[ -z "$broadcast" ] && broadcast="+"
-	elif [ -n "$broadcast" ]; then
-		eerror "Broadcast keywords are not valid with IPv6 addresses"
-		return 1
-	fi
-
-	# This must appear on a single line, continuations cannot be used
-	set -- "${address}${netmask}" ${peer:+peer} ${peer} ${broadcast:+broadcast} ${broadcast} ${anycast:+anycast} ${anycast} ${label:+label} ${label} ${scope:+scope} ${scope} dev "${IFACE}" ${valid_lft:+valid_lft} $valid_lft ${preferred_lft:+preferred_lft} $preferred_lft $confflaglist
-	veinfo ip addr add "$@"
-	ip addr add "$@"
-}
-
-_add_route()
-{
-	local family=
-
-	if [ "$1" = "-A" -o "$1" = "-f" -o "$1" = "-family" ]; then
-		family="-f $2"
-		shift; shift
-	elif [ "$1" = "-4" ]; then
-	    family="-f inet"
-		shift
-	elif [ "$1" = "-6" ]; then
-	    family="-f inet6"
-		shift
-	fi
-
-	if [ $# -eq 3 ]; then
-		set -- "$1" "$2" via "$3"
-	elif [ "$3" = "gw" ]; then
-		local one=$1 two=$2
-		shift; shift; shift
-		set -- "${one}" "${two}" via "$@"
-	fi
-
-	local cmd= have_metric=false
-	while [ -n "$1" ]; do
-		case "$1" in
-			metric) cmd="${cmd} $1"; have_metric=true;;
-			netmask) cmd="${cmd}/$(_netmask2cidr "$2")"; shift;;
-			-host|-net);;
-			*) cmd="${cmd} $1";;
-		esac
-		shift
-	done
-
-	# We cannot use a metric if we're using a nexthop
-	if ! ${have_metric} && \
-		[ -n "${metric}" -a \
-			"${cmd##* nexthop }" = "$cmd" ]
-	then
-		cmd="${cmd} metric ${metric}"
-	fi
-
-	veinfo ip ${family} route append ${cmd} dev "${IFACE}"
-	ip ${family} route append ${cmd} dev "${IFACE}"
-	eend $?
-}
-
-_delete_addresses()
-{
-	ip addr flush dev "${IFACE}" scope global 2>/dev/null
-	ip addr flush dev "${IFACE}" scope site 2>/dev/null
-	if [ "${IFACE}" != "lo" ]; then
-		ip addr flush dev "${IFACE}" scope host 2>/dev/null
-	fi
-	return 0
-}
-
-_has_carrier()
-{
-	LC_ALL=C ip link show dev "${IFACE}" | grep -q "LOWER_UP"
-}
-
-_tunnel()
-{
-	ip tunnel "$@"
-}
-
-# This is just to trim whitespace, do not add any quoting!
-_trim() {
-	echo $*
-}
-
-# This is our interface to Routing Policy Database RPDB
-# This allows for advanced routing tricks
-_ip_rule_runner() {
-	local cmd rules OIFS="${IFS}" family
-	if [ "$1" = "-4" -o "$1" = "-6" ]; then
-		family="$1"
-		shift
-	else
-		family="-4"
-	fi
-	cmd="$1"
-	rules="$2"
-	veindent
-	local IFS="$__IFS"
-	for ru in $rules ; do
-		unset IFS
-		ruN="$(_trim "${ru}")"
-		[ -z "${ruN}" ] && continue
-		vebegin "${cmd} ${ruN}"
-		ip $family rule ${cmd} ${ru}
-		veend $?
-		local IFS="$__IFS"
-	done
-	IFS="${OIFS}"
-	veoutdent
-}
-
-iproute2_pre_start()
-{
-	local tunnel=
-	eval tunnel=\$iptunnel_${IFVAR}
-	if [ -n "${tunnel}" ]; then
-		# Set our base metric to 1000
-		metric=1000
-		# Bug#347657: If the mode is 'ipip6' or 'ip6ip6', the -6 must be passed
-		# to iproute2 during tunnel creation.
-		local ipproto=''
-		[ "${tunnel##mode ipip6}" != "${tunnel}" ] && ipproto='-6'
-		[ "${tunnel##mode ip6ip6}" != "${tunnel}" ] && ipproto='-6'
-
-		ebegin "Creating tunnel ${IFVAR}"
-		ip ${ipproto} tunnel add ${tunnel} name "${IFACE}"
-		eend $? || return 1
-		_up
-	fi
-
-	# MTU support
-	local mtu=
-	eval mtu=\$mtu_${IFVAR}
-	[ -n "${mtu}" ] && ip link set dev "${IFACE}" mtu "${mtu}"
-
-	# TX Queue Length support
-	local len=
-	eval len=\$txqueuelen_${IFVAR}
-	[ -n "${len}" ] && ip link set dev "${IFACE}" txqueuelen "${len}"
-
-	return 0
-}
-
-_iproute2_ipv6_tentative()
-{
-	# Only check tentative when we have a carrier.
-	_has_carrier || return 1
-	LC_ALL=C ip addr show dev "${IFACE}" | \
-		grep -q "^[[:space:]]*inet6 .* tentative"
-}
-
-iproute2_post_start()
-{
-	local n=5
-
-	# Kernel may not have IP built in
-	if [ -e /proc/net/route ]; then
-		local rules="$(_get_array "rules_${IFVAR}")"
-		if [ -n "${rules}" ]; then
-			if ! ip -4 rule list | grep -q "^"; then
-				eerror "IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES) needed for ip rule"
-			else
-				service_set_value "ip_rule" "${rules}"
-				einfo "Adding IPv4 RPDB rules"
-				_ip_rule_runner -4 add "${rules}"
-			fi
-		fi
-		ip -4 route flush table cache dev "${IFACE}"
-	fi
-
-	# Kernel may not have IPv6 built in
-	if [ -e /proc/net/ipv6_route ]; then
-		local rules="$(_get_array "rules6_${IFVAR}")"
-		if [ -n "${rules}" ]; then
-			if ! ip -6 rule list | grep -q "^"; then
-				eerror "IPv6 Policy Routing (CONFIG_IPV6_MULTIPLE_TABLES) needed for ip rule"
-			else
-				service_set_value "ip6_rule" "${rules}"
-				einfo "Adding IPv6 RPDB rules"
-				_ip_rule_runner -6 add "${rules}"
-			fi
-		fi
-		ip -6 route flush table cache dev "${IFACE}"
-	fi
-
-	if _iproute2_ipv6_tentative; then
-		ebegin "Waiting for IPv6 addresses"
-		while [ $n -ge 0 ]; do
-			_iproute2_ipv6_tentative || break
-			sleep 1
-			: $(( n -= 1 ))
-		done
-		[ $n -ge 0 ]
-		eend $?
-	fi
-
-	return 0
-}
-
-iproute2_post_stop()
-{
-	# Kernel may not have IP built in
-	if [ -e /proc/net/route ]; then
-		local rules="$(service_get_value "ip_rule")"
-		if [ -n "${rules}" ]; then
-			einfo "Removing IPv4 RPDB rules"
-			_ip_rule_runner -4 del "${rules}"
-		fi
-
-		# Only do something if the interface actually exist
-		if _exists; then
-			ip -4 route flush table cache dev "${IFACE}"
-		fi
-	fi
-
-	# Kernel may not have IPv6 built in
-	if [ -e /proc/net/ipv6_route ]; then
-		local rules="$(service_get_value "ip6_rule")"
-		if [ -n "${rules}" ]; then
-			einfo "Removing IPv6 RPDB rules"
-			_ip_rule_runner -6 del "${rules}"
-		fi
-
-		# Only do something if the interface actually exist
-		if _exists; then
-			ip -6 route flush table cache dev "${IFACE}"
-		fi
-	fi
-
-	# Don't delete sit0 as it's a special tunnel
-	if [ "${IFACE}" != "sit0" ]; then
-		if [ -n "$(ip tunnel show "${IFACE}" 2>/dev/null)" ]; then
-			ebegin "Destroying tunnel ${IFACE}"
-			ip tunnel del "${IFACE}"
-			eend $?
-		fi
-	fi
-}
-
-# Is the interface administratively/operationally up?
-# The 'UP' status in ifconfig/iproute2 is the administrative status
-# Operational state is available in iproute2 output as 'state UP', or the
-# operstate sysfs variable.
-# 0: up
-# 1: down
-# 2: invalid arguments
-is_admin_up()
-{
-	local iface="$1"
-	[ -z "$iface" ] && iface="$IFACE"
-	ip link show dev $iface | \
-	sed -n '1,1{ /[<,]UP[,>]/{ q 0 }}; q 1; '
-}
-
-is_oper_up()
-{
-	local iface="$1"
-	[ -z "$iface" ] && iface="$IFACE"
-	read state </sys/class/net/"${iface}"/operstate
-	[ "x$state" = "up" ]
-}