Remove gentoo's net.* scripts

It has been determined that it will be best for gentoo's net.* scripts
to be in a separate package to allow independent development.
This package will be called netifrc and maintained by Gentoo.

1 files changed, 0 insertions, 328 deletions

diff --git a/net/ifconfig.sh.Linux.in b/net/ifconfig.sh.Linux.in
deleted file mode 100644
index 2afa66cb..00000000
--- a/net/ifconfig.sh.Linux.in
+++ /dev/null
@@ -1,328 +0,0 @@
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-ifconfig_depend()
-{
-	program /sbin/ifconfig /bin/ifconfig
-	provide interface
-}
-
-_up()
-{
-	ifconfig "${IFACE}" up
-}
-
-_down()
-{
-	ifconfig "${IFACE}" down
-}
-
-_exists()
-{
-	[ -e /sys/class/net/"$IFACE" ]
-}
-
-_ifindex()
-{
-	local index=-1
-	local f v
-	if [ -e /sys/class/net/"${IFACE}"/ifindex ]; then
-		index=$(cat /sys/class/net/"${IFACE}"/ifindex)
-	else
-		for f in /sys/class/net/*/ifindex ; do
-			v=$(cat $f)
-			[ $v -gt $index ] && index=$v
-		done
-		: $(( index += 1 ))
-	fi
-	echo "${index}"
-	return 0
-}
-
-_is_wireless()
-{
-	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless -o \
-		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
-
-	[ ! -e /proc/net/wireless ] && return 1
-	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
-}
-
-_set_flag()
-{
-	ifconfig "${IFACE}" "$1"
-}
-
-_get_mac_address()
-{
-	local mac=$(LC_ALL=C ifconfig "${IFACE}" | \
-	sed -n -e 's/.* \(HWaddr\|ether\) \(..:..:..:..:..:..\).*/\2/p')
-
-	case "${mac}" in
-		00:00:00:00:00:00);;
-		44:44:44:44:44:44);;
-		FF:FF:FF:FF:FF:FF);;
-		"");;
-		*) echo "${mac}"; return 0;;
-	esac
-
-	return 1
-}
-
-_set_mac_address()
-{
-	ifconfig "${IFACE}" hw ether "$1"
-}
-
-_get_inet_address()
-{
-	set -- $(LC_ALL=C ifconfig "${IFACE}" |
-	sed -n -e 's/.*\(inet addr:\|inet \)\([^ ]*\).*\(Mask:\|netmask \)\([^ ]*\).*/\2 \4/p')
-	[ -z "$1" ] && return 1
-
-	echo -n "$1"
-	shift
-	echo "/$(_netmask2cidr "$1")"
-}
-
-_get_inet_addresses()
-{
-	local iface=${IFACE} i=0
-	local addrs="$(_get_inet_address)"
-
-	while true; do
-		local IFACE="${iface}:${i}"
-		_exists || break
-		local addr="$(_get_inet_address)"
-		[ -n "${addr}" ] && addrs="${addrs}${addrs:+ }${addr}"
-		: $(( i += 1 ))
-	done
-	echo "${addrs}"
-}
-
-_cidr2netmask()
-{
-	local cidr="$1" netmask="" done=0 i=0 sum=0 cur=128
-	local octets= frac=
-
-	local octets=$(( cidr / 8 ))
-	local frac=$(( cidr % 8 ))
-	while [ ${octets} -gt 0 ]; do
-		netmask="${netmask}.255"
-		: $(( octets -= 1 ))
-		: $(( done += 1 ))
-	done
-
-	if [ ${done} -lt 4 ]; then
-		while [ ${i} -lt ${frac} ]; do
-			: $(( sum += cur ))
-			: $(( cur /= 2 ))
-			: $(( i += 1 ))
-		done
-		netmask="${netmask}.${sum}"
-		: $(( done += 1 ))
-
-		while [ ${done} -lt 4 ]; do
-			netmask="${netmask}.0"
-			: $(( done += 1 ))
-		done
-	fi
-
-	echo "${netmask#.*}"
-}
-
-_add_address()
-{
-	if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then
-		ifconfig "${IFACE}" "$@" 2>/dev/null
-		return 0
-	fi
-
-	case "$1" in
-		*:*) ifconfig "${IFACE}" inet6 add "$@"; return $?;;
-	esac
-
-	# IPv4 is tricky - ifconfig requires an aliased device
-	# for multiple addresses
-	local iface="${IFACE}"
-	if LC_ALL=C ifconfig "${iface}" | grep -Eq '\<inet (addr:)?.*'; then
-		# Get the last alias made for the interface and add 1 to it
-		i=$(ifconfig | sed '1!G;h;$!d' | grep -m 1 -o "^${iface}:[0-9]*" \
-			| sed -n -e 's/'"${iface}"'://p')
-		: $(( i = ${i:-0} + 1 ))
-		iface="${iface}:${i}"
-	fi
-
-	# ifconfig doesn't like CIDR addresses
-	local ip="${1%%/*}" cidr="${1##*/}" netmask=
-	if [ -n "${cidr}" -a "${cidr}" != "${ip}" ]; then
-		netmask="$(_cidr2netmask "${cidr}")"
-		shift
-		set -- "${ip}" netmask "${netmask}" "$@"
-	fi
-
-	local arg= cmd=
-	while [ -n "$1" ]; do
-		case "$1" in
-			brd)
-				if [ "$2" = "+" ]; then
-					shift
-				else
-					cmd="${cmd} broadcast"
-				fi
-				;;
-			peer) cmd="${cmd} pointopoint";;
-			*) cmd="${cmd} $1";;
-		esac
-		shift
-	done
-
-	ifconfig "${iface}" ${cmd}
-}
-
-_add_route()
-{
-	local inet6= family=
-
-	if [ "$1" = "-A" -o "$1" = "-f" -o "$1" = "-family" ]; then
-		family="-A $2"
-		shift; shift
-	elif [ "$1" = "-4" ]; then
-	    family="-A inet"
-		shift
-	elif [ "$1" = "-6" ]; then
-	    family="-A inet6"
-		shift
-	fi
-
-	if [ -n "${metric}" ]; then
-		set -- "$@" metric ${metric}
-	fi
-
-	if [ $# -eq 3 ]; then
-		set -- "$1" "$2" gw "$3"
-	elif [ "$3" = "via" ]; then
-		local one=$1 two=$2
-		shift; shift; shift
-		set -- "${one}" "${two}" gw "$@"
-	fi
-
-	case "$@" in
-		*:*|default*) [ "$1" = "-net" -o "$1" = "-host" ] && shift;;
-	esac
-
-	route ${family} add "$@" dev "${IFACE}"
-}
-
-_delete_addresses()
-{
-	# We don't remove addresses from aliases
-	case "${IFACE}" in
-		*:*) return 0;;
-	esac
-
-	einfo "Removing addresses"
-	eindent
-	# iproute2 can add many addresses to an iface unlike ifconfig ...
-	# iproute2 added addresses cause problems for ifconfig
-	# as we delete an address, a new one appears, so we have to
-	# keep polling
-	while true; do
-		local addr=$(_get_inet_address)
-		[ -z "${addr}" ] && break
-
-		if [ "${addr}" = "127.0.0.1/8" ]; then
-			# Don't delete the loopback address
-			[ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ] && break
-		fi
-		einfo "${addr}"
-		ifconfig "${IFACE}" 0.0.0.0 || break
-	done
-
-	# Remove IPv6 addresses
-	local addr=
-	for addr in $(LC_ALL=C ifconfig "${IFACE}" | \
-		sed -n -e 's/^.*\(inet6 addr:\|inet6\) \([^ ]*\) .*\(Scope:[^L]\|scopeid [^<]*<[^l]\).*/\2/p'); do
-		if [ "${IFACE}" = "lo" ]; then
-			case "${addr}" in
-				"::1/128"|"/128") continue;;
-			esac
-		fi
-		einfo "${addr}"
-		ifconfig "${IFACE}" inet6 del "${addr}"
-	done
-
-	return 0
-}
-
-_has_carrier()
-{
-	return 0
-}
-
-_tunnel()
-{
-	iptunnel "$@"
-}
-
-ifconfig_pre_start()
-{
-	local tunnel=
-	eval tunnel=\$iptunnel_${IFVAR}
-	if [ -n "${tunnel}" ]; then
-		# Set our base metric to 1000
-		metric=1000
-		ebegin "Creating tunnel ${IFVAR}"
-		iptunnel add ${tunnel}
-		eend $? || return 1
-		_up
-	fi
-
-	# MTU support
-	local mtu=
-	eval mtu=\$mtu_${IFVAR}
-	[ -n "${mtu}" ] && ifconfig "${IFACE}" mtu "${mtu}"
-
-	# TX Queue Length support
-	local len=
-	eval len=\$txqueuelen_${IFVAR}
-	[ -n "${len}" ] && ifconfig "${IFACE}" txqueuelen "${len}"
-
-	return 0
-}
-
-ifconfig_post_stop()
-{
-	# Don't delete sit0 as it's a special tunnel
-	[ "${IFACE}" = "sit0" ] && return 0
-
-	[ -z "$(iptunnel show "${IFACE}" 2>/dev/null)" ] && return 0
-
-	ebegin "Destroying tunnel ${IFACE}"
-	iptunnel del "${IFACE}"
-	eend $?
-}
-
-# Is the interface administratively/operationally up?
-# The 'UP' status in ifconfig/iproute2 is the administrative status
-# Operational state is available in iproute2 output as 'state UP', or the
-# operstate sysfs variable.
-# 0: up
-# 1: down
-# 2: invalid arguments
-is_admin_up()
-{
-	local iface="$1"
-	[ -z "$iface" ] && iface="$IFACE"
-	ifconfig "${iface}" | \
-	sed -n '1,1{ /flags=.*[<,]UP[,>]/{ q 0 }}; q 1; '
-}
-
-is_oper_up()
-{
-	local iface="$1"
-	[ -z "$iface" ] && iface="$IFACE"
-	read state </sys/class/net/"${iface}"/operstate
-	[ "x$state" = "up" ]
-}