diff options
| author | Roy Marples <roy@marples.name> | 2008-01-30 13:20:47 +0000 |
|---|---|---|
| committer | Roy Marples <roy@marples.name> | 2008-01-30 13:20:47 +0000 |
| commit | 0c75e888fcc71599f3a695ae54a7a0b1beb16f0f (patch) | |
| tree | d926d469ac53492d7c53ffdae517dc79d0ba1db5 /doc.Linux | |
| parent | 4bdfccc2c2b2fa67d52f62e62775fc00cb5c0599 (diff) | |
Allow rc_need to work with net scripts, and allow for loopback also.
Diffstat (limited to 'doc.Linux')
| -rw-r--r-- | doc.Linux/net.example | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/doc.Linux/net.example b/doc.Linux/net.example index 49e608e0..80d50479 100644 --- a/doc.Linux/net.example +++ b/doc.Linux/net.example @@ -559,7 +559,7 @@ #vlan_start_eth0="no" # If you do the above then you may want to depend on eth0 like so -# RC_NEED_vlan1="net.eth0" +# rc_need_vlan1="net.eth0" # NOTE: depend functions only work in /etc/conf.d/net # and not in profile configs such as /etc/conf.d/net.foo @@ -573,7 +573,7 @@ # If any of the slaves require extra configuration - for example wireless or # ppp devices - we need to depend function on the bonded interfaces -#RC_NEED_bond0="net.eth0 net.eth1" +#rc_need_bond0="net.eth0 net.eth1" #----------------------------------------------------------------------------- @@ -690,7 +690,7 @@ # If the link require extra configuration - for example wireless or # RFC 268 bridge - we need to depend on the bridge so they get # configured correctly. -#RC_NEED_ppp0="net.nas0" +#rc_need_ppp0="net.nas0" #WARNING: if MTU of the PPP interface is less than 1500 and you use this #machine as a router, you should add the following rule to your firewall @@ -792,7 +792,7 @@ # If any of the ports require extra configuration - for example wireless or # ppp devices - we need to depend on them like so. -#RC_NEED_br0="net.eth0 net.eth1" +#rc_need_br0="net.eth0 net.eth1" # Below is an example of configuring the bridge # Consult "man brctl" for more details @@ -836,7 +836,7 @@ # link_6to4="eth0" # Interface to base it's addresses on # config_6to4="ip6to4" # You may want to depend on eth0 like so -#RC_NEED_6to4="net.eth0" +#rc_need_6to4="net.eth0" # To ensure that eth0 is configured before 6to4. Of course, the tunnel could be # any name and this also works for any configured interface. # NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called |