aboutsummaryrefslogtreecommitdiff
path: root/conf.d.Linux/net.example
diff options
context:
space:
mode:
authorRoy Marples <roy@marples.name>2007-12-29 17:25:00 +0000
committerRoy Marples <roy@marples.name>2007-12-29 17:25:00 +0000
commit0ddc38960c41bd36e0f455201466b696f810c04e (patch)
tree50cd8a824541ebe50d8ec535c81efe46555dec01 /conf.d.Linux/net.example
parent4af969587ea2af23cb7c4cbe6e5f362c5bc7baa5 (diff)
Move net.example to /usr/share/doc/openrc
Diffstat (limited to 'conf.d.Linux/net.example')
-rw-r--r--conf.d.Linux/net.example1037
1 files changed, 0 insertions, 1037 deletions
diff --git a/conf.d.Linux/net.example b/conf.d.Linux/net.example
deleted file mode 100644
index 9cdea36d..00000000
--- a/conf.d.Linux/net.example
+++ /dev/null
@@ -1,1037 +0,0 @@
-##############################################################################
-# QUICK-START
-#
-# The quickest start is if you want to use DHCP.
-# In that case, everything should work out of the box, no configuration
-# necessary, though the startup script will warn you that you haven't
-# specified anything.
-
-# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
-# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
-# the relevant kernel option enabled. So if you don't have an IPv6 enabled
-# kernel then remove the IPv6 address from your config.
-
-# If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
-#
-# If you want to do anything more fancy, you should take the time to
-# read through the rest of this file.
-
-
-##############################################################################
-# MODULES
-#
-# We now support modular networking scripts which means we can easily
-# add support for new interface types and modules while keeping
-# compatability with existing ones.
-#
-# Modules load by default if the package they need is installed. If
-# you specify a module here that doesn't have it's package installed
-# then you get an error stating which package you need to install.
-# Ideally, you only use the modules setting when you have two or more
-# packages installed that supply the same service.
-#
-# In other words, you probably should DO NOTHING HERE...
-
-# Prefer ifconfig over iproute2
-#modules="ifconfig"
-
-# You can also specify other modules for an interface
-# In this case we prefer udhcpc over dhcpcd
-#modules_eth0="udhcpc"
-
-# You can also specify which modules not to use - for example you may be
-# using a supplicant or linux-wlan-ng to control wireless configuration but
-# you still want to configure network settings per SSID associated with.
-#modules="!iwconfig !wpa_supplicant"
-# IMPORTANT: If you need the above, please disable modules in that order
-
-
-##############################################################################
-# INTERFACE HANDLERS
-#
-# We provide two interface handlers presently: ifconfig and iproute2.
-# You need one of these to do any kind of network configuration.
-# For ifconfig support, emerge sys-apps/net-tools
-# For iproute2 support, emerge sys-apps/iproute2
-
-# If you don't specify an interface then we prefer iproute2 if it's installed
-# To prefer ifconfig over iproute2
-#modules="ifconfig"
-
-# For a static configuration, use something like this
-# (They all do exactly the same thing btw)
-#config_eth0="192.168.0.2/24"
-#config_eth0="192.168.0.2 netmask 255.255.255.0"
-
-# If you need more than one address, you can use something like this
-# NOTE: ifconfig creates an aliased device for each extra IPv4 address
-# (eth0:1, eth0:2, etc)
-# iproute2 does not do this as there is no need to
-#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-# However, that only works with CIDR addresses, so you can't use netmask.
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
-
-# You can also use IPv6 addresses
-# (you should always specify a prefix length with IPv6 here)
-#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
-
-# If you wish to keep existing addresses + routing and the interface is up,
-# you can specify a noop (no operation). If the interface is down or there
-# are no addresses assigned, then we move onto the next step (default dhcp)
-# This is useful when configuring your interface with a kernel command line
-# or similar
-#config_eth0="noop 192.168.0.2/24"
-
-# If you don't want ANY address (only useful when calling for advanced stuff)
-#config_eth0="null"
-
-# Here's how to do routing if you need it
-# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
-#routes_eth0="default via 192.168.0.1
-#10.0.0.0/8 via 192.168.0.1
-#::/0"
-
-# If a specified module fails (like dhcp - see below), you can specify a
-# fallback like so
-#fallback_eth0="192.168.0.2/24"
-#fallback_route_eth0="default via 192.168.0.1"
-
-# NOTE: fallback entry must match the entry location in config_eth0
-# As such you can only have one fallback route.
-
-# Some users may need to alter the MTU - here's how
-#mtu_eth0="1500"
-# Same for TX Queue Length
-#txqueuelen_eth0="1000"
-
-# Each module described below can set a default base metric, lower is
-# preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
-#metric_eth0="100"
-# or on a global basis
-#metric="100"
-# The only downside of the global setting is that you have to ensure that
-# there are no conflicting routes yourself. For users with large routing
-# tables you may have to set a global metric as the due to a simple read of
-# the routing table taking over a minute at a time.
-
-##############################################################################
-# OPTIONAL MODULES
-
-#-----------------------------------------------------------------------------
-# WIRELESS (802.11 support)
-# Wireless can be provided by iwconfig or wpa_supplicant
-# wpa_supplicant is preferred, use the modules directive to prefer iwconfig.
-#modules="iwconfig"
-#
-# iwconfig
-# emerge net-wireless/wireless-tools
-###############################################
-# HINTS
-#
-# Most users will just need to set the following options
-# key_SSID1="s:yourkeyhere enc open" # s: means a text key
-# key_SSID2="aaaa-bbbb-cccc-dd" # no s: means a hex key
-# preferred_aps="'SSID 1' 'SSID 2'"
-#
-# Clear? Good. Now configure your wireless network below
-
-###############################################
-# SETTINGS
-# Hard code an SSID to an interface - leave this unset if you wish the driver
-# to scan for available Access Points
-# Set to "any" to connect to any SSID - the driver picks an Access Point
-# This needs to be done when the driver doesn't support scanning
-# This may work for drivers that don't support scanning but you need automatic
-# AP association
-# I would only set this as a last resort really - use the preferred_aps
-# setting at the bottom of this file
-
-# However, using ad-hoc (without scanning for APs) and master mode
-# do require the SSID to be set - do this here
-#essid_eth0="any"
-
-# Set the mode of the interface (managed, ad-hoc, master or auto)
-# The default is auto
-# If it's ad-hoc or master you also may need to specify the channel below
-#mode_eth0="auto"
-
-# If managed mode fails, drop to ad-hoc mode with the below SSID?
-#adhoc_essid_eth0="WLAN"
-
-# Some drivers/hardware don't scan all that well. We have no control over this
-# but we can say how many scans we want to do to try and get a better sweep of
-# the area. The default is 1.
-#scans_eth0="1"
-
-#Channel can be set (1-14), but defaults to 3 if not set.
-#
-# The below is taken verbatim from the BSD wavelan documentation found at
-# http://www.netbsd.org/Documentation/network/wavelan.html
-# There are 14 channels possible; We are told that channels 1-11 are legal for
-# North America, channels 1-13 for most of Europe, channels 10-13 for France,
-# and only channel 14 for Japan. If in doubt, please refer to the documentation
-# that came with your card or access point. Make sure that the channel you
-# select is the same channel your access point (or the other card in an ad-hoc
-# network) is on. The default for cards sold in North America and most of Europe
-# is 3; the default for cards sold in France is 11, and the default for cards
-# sold in Japan is 14.
-#channel_eth0="3"
-
-# Setup any other config commands. This is basically the iwconfig argument
-# without the iwconfig $iface.
-#iwconfig_eth0=""
-
-# Set private driver ioctls. This is basically the iwpriv argument without
-# the iwpriv $iface. If you use the rt2500 driver (not the rt2x00 one) then
-# you can set WPA here, below is an example.
-#iwpriv_eth0=""
-#iwpriv_SSID="set AuthMode=WPAPSK
-#set EncrypType=TKIP
-#set WPAPSK=yourpasskey"
-#NOTE: Even though you can use WPA like so, you may have to set a WEP key
-#if your driver claims the AP is encrypted. The WEP key itself will not be
-#used though.
-
-# Seconds to wait before scanning
-# Some drivers need to wait until they have finished "loading"
-# before they can scan - otherwise they error and claim that they cannot scan
-# or resource is unavailable. The default is to wait zero seconds
-#sleep_scan_eth0="1"
-
-# Seconds to wait until associated. The default is to wait 10 seconds.
-# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
-# booting.
-#associate_timeout_eth0="5"
-
-# By default a successful association in Managed mode sets the MAC
-# address of the AP connected to. However, some drivers (namely
-# the ipw2100) don't set an invalid MAC address when association
-# fails - so we need to check on link quality which some drivers
-# don't report properly either.
-# So if you have connection problems try flipping this setting
-# Valid options are MAC, quality and all - defaults to MAC
-#associate_test_eth0="MAC"
-
-# Some driver/card combinations need to scan in Ad-Hoc mode
-# After scanning, the mode is reset to the one defined above
-#scan_mode_eth0="Ad-Hoc"
-
-# Below you can define private ioctls to run before and after scanning
-# Format is the same as the iwpriv_eth0 above
-# This is needed for the HostAP drivers
-#iwpriv_scan_pre_eth0="'host_roaming 2'"
-#iwpriv_scan_post_eth0="'host_roaming 0'"
-
-# Define a WEP key per SSID or MAC address (of the AP, not your card)
-# The encryption type (open or restricted) must match the
-# encryption type on the Access Point
-# You can't use "any" for an SSID here
-#key_SSID="1234-1234-1234-1234-1234-1234-56"
-# or you can use strings. Passphrase IS NOT supported
-# To use a string, prefix it with s:
-# Note - this example also sets the encryption method to open
-# which is regarded as more secure than restricted
-#key_SSID="s:foobar enc open"
-#key_SSID="s:foobar enc restricted"
-
-# If you have whitespace in your key, here's how to set it and use other
-# commands like using open encryption.
-#key_SSID="s:'foo bar' enc open"
-
-# WEP key for the AP with MAC address 001122334455
-#mac_key_001122334455="s:foobar"
-
-# Here are some more examples of keys as some users find others work
-# and some don't where they should all do the same thing
-#key_SSID="open s:foobar"
-#key_SSID="open 1234-5678-9012"
-#key_SSID="s:foobar enc open"
-#key_SSID="1234-5678-9012 enc open"
-
-# You may want to set muliple keys - here's an example
-# It sets 4 keys on the card and instructs to use key 2 by default
-#key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
-
-# You can also override the interface settings found in /etc/conf.d/net
-# per SSID - which is very handy if you use different networks a lot
-#config_SSID="dhcp"
-#dhcpcd_SSID="-t 5"
-#routes_SSID=
-#fallback_SSID=
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# please put -R in your dhcpcd options
-#dns_servers_SSID="192.168.0.1 192.168.0.2"
-#dns_domain_SSID="some.domain"
-#dns_search_SSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search (searchdomains) are mutually exclusive and
-# searchdomains takes precedence
-
-# You can also set any of the /etc/conf.d/net variables per MAC address
-# incase you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#config_001122334455="dhcp"
-#dhcpcd_001122334455="-t 10"
-#dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
-# WARNING: This will override the SSID being broadcast due to some
-# Access Points sending an SSID even when they have been configured
-# not to!
-# Change 001122334455 to the MAC address and SSID to the SSID
-# it should map to
-#mac_essid_001122334455="SSID"
-
-# This lists the preferred SSIDs to connect to in order
-# SSID's can contain any characters here as they must match the broadcast
-# SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
-# If the first SSID isn't found then it moves onto the next
-# If this isn't defined then it connects to the first one found
-#preferred_aps="SSID1 SSID2"
-
-# You can also define a preferred_aps list per interface
-#preferred_aps_eth0="SSID3 SSID4"
-
-# You can also say whether we only connect to preferred APs or not
-# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly" and "forceany"
-# "any" means it will connect to visible APs in the preferred list and then any
-# other available AP
-# "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forceably connect to APs in order if it does not find
-# them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and does not bother
-# to scan
-# "forceany" does the same as forcepreferred + connects to any other available AP
-# Default is "any"
-#associate_order="any"
-#associate_order_eth0="any"
-
-# You can define blacklisted Access Points in the same way
-#blacklist_aps="SSID1 SSID2"
-#blacklist_aps_eth0="SSID3 SSID4"
-
-# If you have more than one wireless card, you can say if you want
-# to allow each card to associate with the same Access Point or not
-# Values are "yes" and "no"
-# Default is "yes"
-#unique_ap="yes"
-#unique_ap_eth0="yes"
-
-# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
-# essid_eth0 is not set and your card is capable of scanning
-
-# NOTE: preferred_aps list ignores blacklisted_aps - so if you have
-# the same SSID in both, well, you're a bit silly :p
-
-
-############################################################
-# wpa_supplicant
-# emerge net-wireless/wpa-supplicant
-# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
-# /usr/share/doc/wpa_supplicant
-# To configure wpa_supplicant
-#wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
-# Consult wpa_supplicant for more drivers - the default is -Dwext which should
-# work for most cards.
-
-# By default we don't wait for wpa_suppliant to associate and authenticate.
-# If you need to change this behaviour then you don't know how our scripts work
-# and setting this value could cause strange things to happen.
-# If you would like to, so can specify how long in seconds.
-#associate_timeout_eth0=60
-# A value of 0 means wait forever.
-
-# You can also override any settings found here per SSID - which is very
-# handy if you use different networks a lot. See below for using the SSID
-# in our variables
-#config_SSID="dhcp"
-# See the System module below for setting dns/nis/ntp per SSID
-
-# You can also override any settings found here per MAC address of the AP
-# in case you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#mac_config_001122334455="dhcp"
-#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# When an interface has been associated with an Access Point, a global
-# variable called SSID is set to the Access Point's SSID for use in the
-# pre/post user functions below (although it's not available in preup as you
-# won't have associated then)
-
-# If you're using anything else to configure wireless on your interface AND
-# you have installed wpa_supplicant, you need to disable wpa_supplicant
-#modules="!iwconfig !wpa_supplicant"
-#or
-#modules="!wireless"
-
-##############################################################################
-# WIRELESS SSID IN VARIABLES
-##############################################################################
-# Remember to change SSID to your SSID.
-# Say that your SSID is My NET - the line
-# #key_SSID="s:passkey"
-# becomes
-# #key_My_NET="s:passkey"
-# Notice that the space has changed to an underscore - do the same with all
-# characters not in a-z A-Z (English alphabet) 0-9. This only applies to
-# variables and not values.
-#
-# Any SSID's in values like essid_eth0="My NET" may need to be escaped
-# This means placing the character \ before the character
-# \" need to be escaped for example
-# So if your SSID is
-# My "\ NET
-# it becomes
-# My \"\\ NET
-# for example
-# #essid_eth0="My\"\\NET"
-#
-# So using the above we can use
-# #dns_domain_My____NET="My\"\\NET"
-# which is an invalid dns domain, but shows the how to use the variable
-# structure
-#########################################################
-
-
-#-----------------------------------------------------------------------------
-# DHCP
-# DHCP can be provided by dhclient, dhcpcd, pump or udhcpc.
-#
-# dhclient: emerge net-misc/dhcp
-# dhcpcd: emerge net-misc/dhcpcd
-# pump: emerge net-misc/pump
-# udhcpc: emerge net-misc/udhcp
-
-# If you have more than one DHCP client installed, you need to specify which
-# one to use - otherwise we default to dhcpcd if available.
-#modules="dhclient" # to select dhclient over dhcpcd
-#
-# Notes:
-# - All clients send the current hostname to the DHCP server by default
-# - dhcpcd does not daemonize when the lease time is infinite
-# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers
-# - pump does not support getting NIS servers
-# - DHCP tends to erase any existing device information - so add
-# static addresses after dhcp if you need them
-# - dhclient and udhcpc can set other resolv.conf options such as "option"
-# and "sortlist"- see the System module for more details
-
-# Regardless of which DHCP client you prefer, you configure them the
-# same way using one of following depending on which interface modules
-# you're using.
-#config_eth0="dhcp"
-
-# For passing custom options to dhcpcd use something like the following. This
-# example reduces the timeout for retrieving an address from 60 seconds (the
-# default) to 10 seconds.
-#dhcpcd_eth0="-t 10"
-
-# dhclient, udhcpc and pump don't have many runtime options
-# You can pass options to them in a similar manner to dhcpcd though
-#dhclient_eth0="..."
-#udhcpc_eth0="..."
-#pump_eth0="..."
-
-# GENERIC DHCP OPTIONS
-# Set generic DHCP options like so
-#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
-
-# This tells the dhcp client to release it's lease when it stops, not to
-# overwrite dns, ntp and nis settings, not to set a default route and not to
-# send the current hostname to the dhcp server and when it starts.
-# You can use any combination of the above options - the default is not to
-# use any of them.
-
-#-----------------------------------------------------------------------------
-# For APIPA support, emerge net-misc/iputils or net-analyzer/arping
-
-# APIPA is a module that tries to find a free address in the range
-# 169.254.0.0-169.254.255.255 by arping a random address in that range on the
-# interface. If no reply is found then we assign that address to the interface
-
-# This is only useful for LANs where there is no DHCP server and you don't
-# connect directly to the internet.
-#config_eth0="dhcp"
-#fallback_eth0="apipa"
-
-#-----------------------------------------------------------------------------
-# ARPING Gateway configuration
-# and
-# Automatic Private IP Addressing (APIPA)
-# For arpingnet / apipa support, emerge net-misc/iputils or net-analyzer/arping
-#
-# This is a module that tries to find a gateway IP. If it exists then we use
-# that gateways configuration for our own. For the configuration variables
-# simply ensure that each octet is zero padded and the dots are removed.
-# Below is an example.
-#
-#gateways_eth0="192.168.0.1 10.0.0.1"
-#config_192168000001="192.168.0.2/24"
-#routes_192168000001="default via 192.168.0.1"
-#dns_servers_192168000001="192.168.0.1"
-#config_010000000001="10.0.0.254/8"
-#routes_010000000001="default via 10.0.0.1"
-#dns_servers_010000000001="10.0.0.1"
-
-# We can also specify a specific MAC address for each gateway if different
-# networks have the same gateway.
-#gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC 10.0.0.1,33:44:55:DD:EE:FF"
-#config_192168000001_001122AABBCC="192.168.0.2/24"
-#routes_192168000001_001122AABBCC="default via 192.168.0.1"
-#dns_servers_192168000001_001122AABBCC="192.168.0.1"
-#config_010000000001_334455DDEEFF="10.0.0.254/8"
-#routes_010000000001_334455DDEEFF="default via 10.0.0.1"
-#dns_servers_010000000001_334455DDEEFF="10.0.0.1"
-
-# If you need to spoof the source address, you can add that as third parameter
-# like so
-#gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC,192.168.0.50"
-#or
-#gateways_eth0="192.168.0.1,,192.168.0.50"
-# This requires arping to be installed though
-
-# If we don't find any gateways (or there are none configured) then we try and
-# use APIPA to find a free address in the range 169.254.0.0-169.254.255.255
-# by arping a random address in that range on the interface. If no reply is
-# found then we assign that address to the interface.
-
-# This is only useful for LANs where there is no DHCP server.
-#config_eth0="arping"
-
-# or if no DHCP server can be found
-#config_eth0="dhcp"
-#fallback_eth0="arping"
-
-# NOTE: We default to sleeping for 1 second the first time we attempt an
-# arping to give the interface time to settle on the LAN. This appears to
-# be a good default for most instances, but if not you can alter it here.
-#arping_sleep=5
-#arping_sleep_lan=7
-
-# NOTE: We default to waiting 3 seconds to get an arping response. You can
-# change the default wait like so.
-#arping_wait=3
-#arping_wait_lan=2
-
-#-----------------------------------------------------------------------------
-# VLAN (802.1q support)
-# For VLAN support, emerge net-misc/vconfig
-
-# Specify the VLAN numbers for the interface like so
-# Please ensure your VLAN IDs are NOT zero-padded
-#vlans_eth0="1 2"
-
-# You may not want to assign an IP the the physical interface, but we still
-# need it up.
-#config_eth0="null"
-
-# You can also configure the VLAN - see for vconfig man page for more details
-#vconfig_eth0="set_name_type VLAN_PLUS_VID_NO_PAD"
-#vconfig_vlan1="set_flag 1
-#set_egress_map 2 6"
-#config_vlan1="172.16.3.1/23"
-#config_vlan2="172.16.2.1/23"
-
-# NOTE: Vlans can be configured with a . in their interface names
-# When configuring vlans with this name type, you need to replace . with a _
-#config_eth0.1="dhcp" - does not work
-#config_eth0_1="dhcp" - does work
-
-# NOTE: Vlans are controlled by their physical interface and not per vlan
-# This means you do not need to create init scripts in /etc/init.d for each
-# vlan, you must need to create one for the physical interface.
-# If you wish to control the configuration of each vlan through a separate
-# script, or wish to rename the vlan interface to something that vconfig
-# cannot then you need to do this.
-#vlan_start_eth0="no"
-
-# If you do the above then you may want to depend on eth0 like so
-# RC_NEED_vlan1="net.eth0"
-# NOTE: depend functions only work in /etc/conf.d/net
-# and not in profile configs such as /etc/conf.d/net.foo
-
-#-----------------------------------------------------------------------------
-# Bonding
-# For link bonding/trunking emerge net-misc/ifenslave
-
-# To bond interfaces together
-#slaves_bond0="eth0 eth1 eth2"
-#config_bond0="null" # You may not want to assign an IP the the bond
-
-# If any of the slaves require extra configuration - for example wireless or
-# ppp devices - we need to depend function on the bonded interfaces
-#RC_NEED_bond0="net.eth0 net.eth1"
-
-
-#-----------------------------------------------------------------------------
-# Classical IP over ATM
-# For CLIP support emerge net-dialup/linux-atm
-
-# Ensure that you have /etc/atmsigd.conf setup correctly
-# Now setup each clip interface like so
-#clip_atm0="peer_ip [if.]vpi.vci [opts],"
-# where "peer_ip" is the IP address of a PVC peer (in case of an ATM connection
-# with your ISP, your only peer is usually the ISP gateway closest to you),
-# "if" is the number of the ATM interface which will carry the PVC, "vpi.vci"
-# is the ATM VC address, and "opts" may optionally specify VC parameters like
-# qos, pcr, and the like (see "atmarp -s" for further reference). Please also
-# note quoting: it is meant to distinguish the VCs you want to create. You may,
-# in example, create an atm0 interface to more peers, like this:
-#clip_atm0="1.1.1.254,0.8.35 1.1.1.253,1.8.35"
-
-# By default, the PVC will use the LLC/SNAP encapsulation. If you rather need a
-# null encapsulation (aka "VC mode"), please add the keyword "null" to opts.
-
-
-#-----------------------------------------------------------------------------
-# PPP
-# For PPP support, emerge net-dialup/ppp
-# PPP is used for most dialup connections, including ADSL.
-# The older ADSL module is documented below, but you are encouraged to try
-# this module first.
-#
-# You need to create the PPP net script yourself. Make it like so
-#ln -s net.lo /etc/init.d/net.ppp0
-#
-# Each PPP interface requires an interface to use as a "Link"
-#link_ppp0="/dev/ttyS0" # Most PPP links will use a serial port
-#link_ppp0="eth0" # PPPoE requires an ethernet interface
-#link_ppp0="[itf.]vpi.vci" # PPPoA requires the ATM VC's address
-#link_ppp0="/dev/null" # ISDN links should have this
-#link_ppp0="pty 'your_link_command'" # PPP links over ssh, rsh, etc
-#
-# Here you should specify what pppd plugins you want to use
-# Available plugins are: pppoe, pppoa, capi, dhcpc, minconn, radius,
-# radattr, radrealms and winbind
-#plugins_ppp0="pppoe" # Required plugin for PPPoE
-#plugins_ppp0="pppoa vc-encaps" # Required plugin for PPPoA with an option
-#plugins_ppp0="capi" # Required plugin for ISDN
-#
-# PPP requires at least a username. You can optionally set a password here too
-# If you don't, then it will use the password specified in /etc/ppp/*-secrets
-# against the specified username
-#username_ppp0='user'
-#password_ppp0='password'
-# NOTE: You can set a blank password like so
-#password_ppp0=
-#
-# The PPP daemon has many options you can specify - although there are many
-# and may seem daunting, it is recommended that you read the pppd man page
-# before enabling any of them
-#pppd_ppp0="
-# maxfail 0 # WARNING: It's not recommended you use this
-# # if you don't specify maxfail then we assume 0
-# updetach # If not set, "/etc/init.d/net.ppp0 start" will return
-# # immediately, without waiting the link to come up
-# # for the first time.
-# # Do not use it for dial-on-demand links!
-# debug # Enables syslog debugging
-# noauth # Do not require the peer to authenticate itself
-# defaultroute # Make this PPP interface the default route
-# usepeerdns # Use the DNS settings provided by PPP
-#
-# On demand options
-# demand # Enable dial on demand
-# idle 30 # Link goes down after 30 seconds of inactivity
-# 10.112.112.112:10.112.112.113 # Phony IP addresses
-# ipcp-accept-remote # Accept the peers idea of remote address
-# ipcp-accept-local # Accept the peers idea of local address
-# holdoff 3 # Wait 3 seconds after link dies before re-starting
-#
-# Dead peer detection
-# lcp-echo-interval 15 # Send a LCP echo every 15 seconds
-# lcp-echo-failure 3 # Make peer dead after 3 consective
-# # echo-requests
-#
-# Compression options - use these to completely disable compression
-# noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp
-#
-# Dial-up settings
-# lock # Lock serial port
-# 115200 # Set the serial port baud rate
-# modem crtscts # Enable hardware flow control
-# 192.168.0.1:192.168.0.2 # Local and remote IP addresses
-#"
-#
-# Dial-up PPP users need to specify at least one telephone number
-#phone_number_ppp0="12345689" # Maximum 2 phone numbers are supported
-# They will also need a chat script - here's a good one
-#chat_ppp0="
-#ABORT BUSY
-#ABORT ERROR
-#ABORT 'NO ANSWER'
-#ABORT 'NO CARRIER'
-#ABORT 'NO DIALTONE'
-#ABORT 'Invalid Login'
-#ABORT 'Login incorrect'
-#TIMEOUT 5
-#'' ATZ
-#OK AT # Put your modem initialization string here
-#OK 'ATDT\T'
-#TIMEOUT 60
-#CONNECT ''
-#TIMEOUT 5
-#~-- ''
-#"
-
-# If the link require extra configuration - for example wireless or
-# RFC 268 bridge - we need to depend on the bridge so they get
-# configured correctly.
-#RC_NEED_ppp0="net.nas0"
-
-#WARNING: if MTU of the PPP interface is less than 1500 and you use this
-#machine as a router, you should add the following rule to your firewall
-#
-#iptables -I FORWARD 1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-
-#-----------------------------------------------------------------------------
-# ADSL
-# For ADSL support, emerge net-dialup/rp-pppoe
-# WARNING: This ADSL module is being deprecated in favour of the PPP module
-# above.
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ADSL
-#config_eth0="adsl"
-
-# You probably won't need to edit /etc/ppp/pppoe.conf if you set this
-#adsl_user_eth0="my-adsl-username"
-
-#-----------------------------------------------------------------------------
-# ISDN
-# For ISDN support, emerge net-dialup/isdn4k-utils
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ISDN
-#config_ippp0="dhcp"
-# It's important to specify dhcp if you need it!
-#config_ippp0="192.168.0.1/24"
-# Otherwise, you can use a static IP
-
-# NOTE: The interface name must be either ippp or isdn followed by a number
-
-# You may need this option to set the default route
-#ipppd_eth0="defaultroute"
-
-#-----------------------------------------------------------------------------
-# MAC changer
-# To set a specific MAC address
-#mac_eth0="00:11:22:33:44:55"
-
-# For changing MAC addresses using the below, emerge net-analyzer/macchanger
-# - to randomize the last 3 bytes only
-#mac_eth0="random-ending"
-# - to randomize between the same physical type of connection (e.g. fibre,
-# copper, wireless) , all vendors
-#mac_eth0="random-samekind"
-# - to randomize between any physical type of connection (e.g. fibre, copper,
-# wireless) , all vendors
-#mac_eth0="random-anykind"
-# - full randomization - WARNING: some MAC addresses generated by this may NOT
-# act as expected
-#mac_eth0="random-full"
-# custom - passes all parameters directly to net-analyzer/macchanger
-#mac_eth0="some custom set of parameters"
-
-# You can also set other options based on the MAC address of your network card
-# Handy if you use different docking stations with laptops
-#config_001122334455="dhcp"
-
-#-----------------------------------------------------------------------------
-# TUN/TAP
-# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities
-#
-# You must specify if we're a tun or tap device. Then you can give it any
-# name you like - such as vpn
-#tuntap_vpn="tun"
-#config_vpn="192.168.0.1/24"
-
-# Or stick wit the generic names - like tap0
-#tuntap_tap0="tap"
-#config_tap0="192.168.0.1/24"
-
-# For passing custom options to tunctl use something like the following. This
-# example sets the owner to adm
-#tunctl_tun1="-u adm"
-# When using openvpn, there are no options
-
-#-----------------------------------------------------------------------------
-# Bridging (802.1d)
-# For bridging support emerge net-misc/bridge-utils
-
-# To add ports to bridge br0
-#bridge_br0="eth0 eth1"
-# or dynamically add them when the interface comes up
-#bridge_add_eth0="br0"
-#bridge_add_eth1="br0"
-
-# You need to configure the ports to null values so dhcp does not get started
-#config_eth0="null"
-#config_eth1="null"
-
-# Finally give the bridge an address - dhcp or a static IP
-#config_br0="dhcp" # may not work when adding ports dynamically
-#config_br0="192.168.0.1/24"
-
-# If any of the ports require extra configuration - for example wireless or
-# ppp devices - we need to depend on them like so.
-#RC_NEED_br0="net.eth0 net.eth1"
-
-# Below is an example of configuring the bridge
-# Consult "man brctl" for more details
-#brctl_br0="setfd 0
-#sethello 0
-#stp off"
-
-#-----------------------------------------------------------------------------
-# RFC 2684 Bridge Support
-# For RFC 2684 bridge support emerge net-misc/br2684ctl
-
-# Interface names have to be of the form nas0, nas1, nas2, etc.
-# You have to specify a VPI and VCI for the interface like so
-#br2684ctl_nas0="-a 0.38" # UK VPI and VCI
-
-# You may want to configure the encapsulation method as well by adding the -e
-# option to the command above (may need to be before the -a command)
-# -e 0 # LLC (default)
-# -e 1 # VC mux
-
-# Then you can configure the interface as normal
-#config_nas0="'192.168.0.1/24'"
-
-#-----------------------------------------------------------------------------
-# Tunnelling
-# WARNING: For tunnelling it is highly recommended that you
-# emerge sys-apps/iproute2
-#
-# For GRE tunnels
-#iptunnel_vpn0="mode gre remote 207.170.82.1 key 0xffffffff ttl 255"
-
-# For IPIP tunnels
-#iptunnel_vpn0="mode ipip remote 207.170.82.2 ttl 255"
-
-# To configure the interface
-#config_vpn0="192.168.0.2 pointopoint 192.168.1.2" # ifconfig style
-#config_vpn0="192.168.0.2 peer 192.168.1.1" # iproute2 style
-
-# 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
-# have a non-private address configured on an interface.
-# link_6to4="eth0" # Interface to base it's addresses on
-# config_6to4="ip6to4"
-# You may want to depend on eth0 like so
-#RC_NEED_6to4="net.eth0"
-# To ensure that eth0 is configured before 6to4. Of course, the tunnel could be
-# any name and this also works for any configured interface.
-# NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called
-# sit0 - otherwise use a different name like 6to4 in the example above.
-
-# You can also specify a relay and suffix if you like.
-# The default relay is 192.88.99.1 and the defualt suffix is :1
-#relay_6to4="192.168.3.2"
-#suffix_6to4=":ff"
-
-
-#-----------------------------------------------------------------------------
-# System
-# For configuring system specifics such as domain, dns, ntp and nis servers
-# It's rare that you would need todo this, but you can anyway.
-# This is most benefit to wireless users who don't use DHCP so they can change
-# their configs based on SSID.
-
-# If you omit the _eth0 suffix, then it applies to all interfaces unless
-# overridden by the interface suffix.
-#dns_domain_eth0="your.domain"
-#dns_servers_eth0="192.168.0.2 192.168.0.3"
-#dns_search_eth0="this.domain that.domain"
-#dns_options_eth0="timeout:1 rotate"
-#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
-# See the man page for resolv.conf for details about the options and sortlist
-# directives
-
-#ntp_servers_eth0="192.168.0.2 192.168.0.3"
-
-#nis_domain_eth0="domain"
-#nis_servers_eth0="192.168.0.2 192.168.0.3"
-
-# NOTE: Setting any of these will stamp on the files in question. So if you
-# don't specify dns_servers but you do specify dns_domain then no nameservers
-# will be listed in /etc/resolv.conf even if there were any there to start
-# with.
-# If this is an issue for you then maybe you should look into a resolv.conf
-# manager like resolvconf-gentoo to manage this file for you. All packages
-# that baselayout supports use resolvconf-gentoo if installed.
-
-#-----------------------------------------------------------------------------
-# Cable in/out detection
-# Sometimes the cable is in, others it's out. Obviously you don't want to
-# restart net.eth0 every time when you plug it in either.
-#
-# netplug is a package that detects this and requires no extra configuration
-# on your part.
-# emerge sys-apps/netplug
-# or
-# emerge sys-apps/ifplugd
-# and you're done :)
-
-# By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
-# then you can specify a timeout here.
-#plug_timeout="10"
-# A value of 0 means wait forever.
-
-# If you don't want to use netplug on a specific interface but you have it
-# installed, you can disable it for that interface via the modules statement
-#modules_eth0="!netplugd"
-# You can do the same for ifplugd
-#
-# You can disable them both with the generic plug
-#modules_eth0="!plug"
-
-# To use specific ifplugd options, fex specifying wireless mode
-#ifplugd_eth0="--api-mode=wlan"
-# man ifplugd for more options
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Four functions can be defined which will be called surrounding the
-# start/stop operations. The functions are called with the interface
-# name first so that one function can control multiple adapters. An extra two
-# functions can be defined when an interface fails to start or stop.
-#
-# The return values for the preup and predown functions should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue. If preup returns a non-zero value, then
-# interface configuration will be aborted. If predown returns a
-# non-zero value, then the interface will not be allowed to continue
-# deconfiguration.
-#
-# The return values for the postup, postdown, failup and faildown functions are
-# ignored since there's nothing to do if they indicate failure.
-#
-# ${IFACE} is set to the interface being brought up/down
-# ${IFVAR} is ${IFACE} converted to variable name bash allows
-
-#preup() {
-# # Test for link on the interface prior to bringing it up. This
-# # only works on some network adapters and requires the mii-diag
-# # package to be installed.
-# if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
-# ewarn "No link on ${IFACE}, aborting configuration"
-# return 1
-# fi
-#
-# # Test for link on the interface prior to bringing it up. This
-# # only works on some network adapters and requires the ethtool
-# # package to be installed.
-# if ethtool "${IFACE}" | grep -q 'Link detected: no'; then
-# ewarn "No link on ${IFACE}, aborting configuration"
-# return 1
-# fi
-#
-# # Test to see if we're docked or not and configure like so
-# # config_docked="dhcp"
-# if grep -q "1" /sys/devices/platform/dock.0/docked; then
-# einfo "${IFACE} is docked - configuring"
-# _configure_variables "docked"
-# fi
-#
-# # Remember to return 0 on success
-# return 0
-#}
-
-#predown() {
-# # The default in the script is to test for NFS root and disallow
-# # downing interfaces in that case. Note that if you specify a
-# # predown() function you will override that logic. Here it is, in
-# # case you still want it...
-# if is_net_fs /; then
-# eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-# return 1
-# fi
-#
-# # Remember to return 0 on success
-# return 0
-#}
-
-#postup() {
-# # This function could be used, for example, to register with a
-# # dynamic DNS service. Another possibility would be to
-# # send/receive mail once the interface is brought up.
-
-# # Here is an example that allows the use of iproute rules
-# # which have been configured using the rules_eth0 variable.
-# #rules_eth0=" \
-# # 'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
-# # 'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
-# #"
-# eval set -- $\rules_${IFVAR}
-# if [ $# != 0 ]; then
-# einfo "Adding IP policy routing rules"
-# eindent
-# # Ensure that the kernel supports policy routing
-# if ! ip rule list | grep -q "^"; then
-# eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)"
-# eerror "in your kernel to use ip rules"
-# else
-# for x; do
-# ebegin "${x}"
-# ip rule add ${x} dev "${IFACE}"
-# eend $?
-# done
-# fi
-# eoutdent
-# # Flush the cache
-# ip route flush cache dev "${IFACE}"
-# fi
-
-#}
-
-#postdown() {
-# # Enable Wake-On-LAN for every interface except for lo
-# # Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
-# # as well ;)
-# [ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g
-
-# Automatically erase any ip rules created in the example postup above
-# if interface_exists "${IFACE}"; then
-# # Remove any rules for this interface
-# local rule
-# ip rule list | grep " iif ${IFACE}[ ]*" | {
-# while read rule; do
-# rule="${rule#*:}"
-# ip rule del ${rule}
-# done
-# }
-# # Flush the route cache
-# ip route flush cache dev "${IFACE}"
-# fi
-
-# # Return 0 always
-# return 0
-#}
-
-#failup() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-#}
-
-#faildown() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-#}