diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/png.h | 3687 | ||||
| -rw-r--r-- | include/pngconf.h | 1496 | ||||
| -rw-r--r-- | include/zconf.h | 511 | ||||
| -rw-r--r-- | include/zlib.h | 1768 |
4 files changed, 0 insertions, 7462 deletions
diff --git a/include/png.h b/include/png.h deleted file mode 100644 index 9fc8cefd..00000000 --- a/include/png.h +++ /dev/null @@ -1,3687 +0,0 @@ -/* png.h - header file for PNG reference library - * - * libpng version 1.2.37 - June 4, 2009 - * Copyright (c) 1998-2009 Glenn Randers-Pehrson - * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) - * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) - * - * Authors and maintainers: - * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat - * libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger - * libpng versions 0.97, January 1998, through 1.2.37 - June 4, 2009: Glenn - * See also "Contributing Authors", below. - * - * Note about libpng version numbers: - * - * Due to various miscommunications, unforeseen code incompatibilities - * and occasional factors outside the authors' control, version numbering - * on the library has not always been consistent and straightforward. - * The following table summarizes matters since version 0.89c, which was - * the first widely used release: - * - * source png.h png.h shared-lib - * version string int version - * ------- ------ ----- ---------- - * 0.89c "1.0 beta 3" 0.89 89 1.0.89 - * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] - * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] - * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] - * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] - * 0.97c 0.97 97 2.0.97 - * 0.98 0.98 98 2.0.98 - * 0.99 0.99 98 2.0.99 - * 0.99a-m 0.99 99 2.0.99 - * 1.00 1.00 100 2.1.0 [100 should be 10000] - * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] - * 1.0.1 png.h string is 10001 2.1.0 - * 1.0.1a-e identical to the 10002 from here on, the shared library - * 1.0.2 source version) 10002 is 2.V where V is the source code - * 1.0.2a-b 10003 version, except as noted. - * 1.0.3 10003 - * 1.0.3a-d 10004 - * 1.0.4 10004 - * 1.0.4a-f 10005 - * 1.0.5 (+ 2 patches) 10005 - * 1.0.5a-d 10006 - * 1.0.5e-r 10100 (not source compatible) - * 1.0.5s-v 10006 (not binary compatible) - * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) - * 1.0.6d-f 10007 (still binary incompatible) - * 1.0.6g 10007 - * 1.0.6h 10007 10.6h (testing xy.z so-numbering) - * 1.0.6i 10007 10.6i - * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) - * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) - * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) - * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) - * 1.0.7 1 10007 (still compatible) - * 1.0.8beta1-4 1 10008 2.1.0.8beta1-4 - * 1.0.8rc1 1 10008 2.1.0.8rc1 - * 1.0.8 1 10008 2.1.0.8 - * 1.0.9beta1-6 1 10009 2.1.0.9beta1-6 - * 1.0.9rc1 1 10009 2.1.0.9rc1 - * 1.0.9beta7-10 1 10009 2.1.0.9beta7-10 - * 1.0.9rc2 1 10009 2.1.0.9rc2 - * 1.0.9 1 10009 2.1.0.9 - * 1.0.10beta1 1 10010 2.1.0.10beta1 - * 1.0.10rc1 1 10010 2.1.0.10rc1 - * 1.0.10 1 10010 2.1.0.10 - * 1.0.11beta1-3 1 10011 2.1.0.11beta1-3 - * 1.0.11rc1 1 10011 2.1.0.11rc1 - * 1.0.11 1 10011 2.1.0.11 - * 1.0.12beta1-2 2 10012 2.1.0.12beta1-2 - * 1.0.12rc1 2 10012 2.1.0.12rc1 - * 1.0.12 2 10012 2.1.0.12 - * 1.1.0a-f - 10100 2.1.1.0a-f (branch abandoned) - * 1.2.0beta1-2 2 10200 2.1.2.0beta1-2 - * 1.2.0beta3-5 3 10200 3.1.2.0beta3-5 - * 1.2.0rc1 3 10200 3.1.2.0rc1 - * 1.2.0 3 10200 3.1.2.0 - * 1.2.1beta1-4 3 10201 3.1.2.1beta1-4 - * 1.2.1rc1-2 3 10201 3.1.2.1rc1-2 - * 1.2.1 3 10201 3.1.2.1 - * 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6 - * 1.0.13beta1 10 10013 10.so.0.1.0.13beta1 - * 1.0.13rc1 10 10013 10.so.0.1.0.13rc1 - * 1.2.2rc1 12 10202 12.so.0.1.2.2rc1 - * 1.0.13 10 10013 10.so.0.1.0.13 - * 1.2.2 12 10202 12.so.0.1.2.2 - * 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6 - * 1.2.3 12 10203 12.so.0.1.2.3 - * 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3 - * 1.0.14rc1 13 10014 10.so.0.1.0.14rc1 - * 1.2.4rc1 13 10204 12.so.0.1.2.4rc1 - * 1.0.14 10 10014 10.so.0.1.0.14 - * 1.2.4 13 10204 12.so.0.1.2.4 - * 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2 - * 1.0.15rc1-3 10 10015 10.so.0.1.0.15rc1-3 - * 1.2.5rc1-3 13 10205 12.so.0.1.2.5rc1-3 - * 1.0.15 10 10015 10.so.0.1.0.15 - * 1.2.5 13 10205 12.so.0.1.2.5 - * 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4 - * 1.0.16 10 10016 10.so.0.1.0.16 - * 1.2.6 13 10206 12.so.0.1.2.6 - * 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2 - * 1.0.17rc1 10 10017 10.so.0.1.0.17rc1 - * 1.2.7rc1 13 10207 12.so.0.1.2.7rc1 - * 1.0.17 10 10017 10.so.0.1.0.17 - * 1.2.7 13 10207 12.so.0.1.2.7 - * 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 - * 1.0.18rc1-5 10 10018 10.so.0.1.0.18rc1-5 - * 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 - * 1.0.18 10 10018 10.so.0.1.0.18 - * 1.2.8 13 10208 12.so.0.1.2.8 - * 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3 - * 1.2.9beta4-11 13 10209 12.so.0.9[.0] - * 1.2.9rc1 13 10209 12.so.0.9[.0] - * 1.2.9 13 10209 12.so.0.9[.0] - * 1.2.10beta1-8 13 10210 12.so.0.10[.0] - * 1.2.10rc1-3 13 10210 12.so.0.10[.0] - * 1.2.10 13 10210 12.so.0.10[.0] - * 1.2.11beta1-4 13 10211 12.so.0.11[.0] - * 1.0.19rc1-5 10 10019 10.so.0.19[.0] - * 1.2.11rc1-5 13 10211 12.so.0.11[.0] - * 1.0.19 10 10019 10.so.0.19[.0] - * 1.2.11 13 10211 12.so.0.11[.0] - * 1.0.20 10 10020 10.so.0.20[.0] - * 1.2.12 13 10212 12.so.0.12[.0] - * 1.2.13beta1 13 10213 12.so.0.13[.0] - * 1.0.21 10 10021 10.so.0.21[.0] - * 1.2.13 13 10213 12.so.0.13[.0] - * 1.2.14beta1-2 13 10214 12.so.0.14[.0] - * 1.0.22rc1 10 10022 10.so.0.22[.0] - * 1.2.14rc1 13 10214 12.so.0.14[.0] - * 1.0.22 10 10022 10.so.0.22[.0] - * 1.2.14 13 10214 12.so.0.14[.0] - * 1.2.15beta1-6 13 10215 12.so.0.15[.0] - * 1.0.23rc1-5 10 10023 10.so.0.23[.0] - * 1.2.15rc1-5 13 10215 12.so.0.15[.0] - * 1.0.23 10 10023 10.so.0.23[.0] - * 1.2.15 13 10215 12.so.0.15[.0] - * 1.2.16beta1-2 13 10216 12.so.0.16[.0] - * 1.2.16rc1 13 10216 12.so.0.16[.0] - * 1.0.24 10 10024 10.so.0.24[.0] - * 1.2.16 13 10216 12.so.0.16[.0] - * 1.2.17beta1-2 13 10217 12.so.0.17[.0] - * 1.0.25rc1 10 10025 10.so.0.25[.0] - * 1.2.17rc1-3 13 10217 12.so.0.17[.0] - * 1.0.25 10 10025 10.so.0.25[.0] - * 1.2.17 13 10217 12.so.0.17[.0] - * 1.0.26 10 10026 10.so.0.26[.0] - * 1.2.18 13 10218 12.so.0.18[.0] - * 1.2.19beta1-31 13 10219 12.so.0.19[.0] - * 1.0.27rc1-6 10 10027 10.so.0.27[.0] - * 1.2.19rc1-6 13 10219 12.so.0.19[.0] - * 1.0.27 10 10027 10.so.0.27[.0] - * 1.2.19 13 10219 12.so.0.19[.0] - * 1.2.20beta01-04 13 10220 12.so.0.20[.0] - * 1.0.28rc1-6 10 10028 10.so.0.28[.0] - * 1.2.20rc1-6 13 10220 12.so.0.20[.0] - * 1.0.28 10 10028 10.so.0.28[.0] - * 1.2.20 13 10220 12.so.0.20[.0] - * 1.2.21beta1-2 13 10221 12.so.0.21[.0] - * 1.2.21rc1-3 13 10221 12.so.0.21[.0] - * 1.0.29 10 10029 10.so.0.29[.0] - * 1.2.21 13 10221 12.so.0.21[.0] - * 1.2.22beta1-4 13 10222 12.so.0.22[.0] - * 1.0.30rc1 10 10030 10.so.0.30[.0] - * 1.2.22rc1 13 10222 12.so.0.22[.0] - * 1.0.30 10 10030 10.so.0.30[.0] - * 1.2.22 13 10222 12.so.0.22[.0] - * 1.2.23beta01-05 13 10223 12.so.0.23[.0] - * 1.2.23rc01 13 10223 12.so.0.23[.0] - * 1.2.23 13 10223 12.so.0.23[.0] - * 1.2.24beta01-02 13 10224 12.so.0.24[.0] - * 1.2.24rc01 13 10224 12.so.0.24[.0] - * 1.2.24 13 10224 12.so.0.24[.0] - * 1.2.25beta01-06 13 10225 12.so.0.25[.0] - * 1.2.25rc01-02 13 10225 12.so.0.25[.0] - * 1.0.31 10 10031 10.so.0.31[.0] - * 1.2.25 13 10225 12.so.0.25[.0] - * 1.2.26beta01-06 13 10226 12.so.0.26[.0] - * 1.2.26rc01 13 10226 12.so.0.26[.0] - * 1.2.26 13 10226 12.so.0.26[.0] - * 1.0.32 10 10032 10.so.0.32[.0] - * 1.2.27beta01-06 13 10227 12.so.0.27[.0] - * 1.2.27rc01 13 10227 12.so.0.27[.0] - * 1.0.33 10 10033 10.so.0.33[.0] - * 1.2.27 13 10227 12.so.0.27[.0] - * 1.0.34 10 10034 10.so.0.34[.0] - * 1.2.28 13 10228 12.so.0.28[.0] - * 1.2.29beta01-03 13 10229 12.so.0.29[.0] - * 1.2.29rc01 13 10229 12.so.0.29[.0] - * 1.0.35 10 10035 10.so.0.35[.0] - * 1.2.29 13 10229 12.so.0.29[.0] - * 1.0.37 10 10037 10.so.0.37[.0] - * 1.2.30beta01-04 13 10230 12.so.0.30[.0] - * 1.0.38rc01-08 10 10038 10.so.0.38[.0] - * 1.2.30rc01-08 13 10230 12.so.0.30[.0] - * 1.0.38 10 10038 10.so.0.38[.0] - * 1.2.30 13 10230 12.so.0.30[.0] - * 1.0.39rc01-03 10 10039 10.so.0.39[.0] - * 1.2.31rc01-03 13 10231 12.so.0.31[.0] - * 1.0.39 10 10039 10.so.0.39[.0] - * 1.2.31 13 10231 12.so.0.31[.0] - * 1.2.32beta01-02 13 10232 12.so.0.32[.0] - * 1.0.40rc01 10 10040 10.so.0.40[.0] - * 1.2.32rc01 13 10232 12.so.0.32[.0] - * 1.0.40 10 10040 10.so.0.40[.0] - * 1.2.32 13 10232 12.so.0.32[.0] - * 1.2.33beta01-02 13 10233 12.so.0.33[.0] - * 1.2.33rc01-02 13 10233 12.so.0.33[.0] - * 1.0.41rc01 10 10041 10.so.0.41[.0] - * 1.2.33 13 10233 12.so.0.33[.0] - * 1.0.41 10 10041 10.so.0.41[.0] - * 1.2.34beta01-07 13 10234 12.so.0.34[.0] - * 1.0.42rc01 10 10042 10.so.0.42[.0] - * 1.2.34rc01 13 10234 12.so.0.34[.0] - * 1.0.42 10 10042 10.so.0.42[.0] - * 1.2.34 13 10234 12.so.0.34[.0] - * 1.2.35beta01-03 13 10235 12.so.0.35[.0] - * 1.0.43rc01-02 10 10043 10.so.0.43[.0] - * 1.2.35rc01-02 13 10235 12.so.0.35[.0] - * 1.0.43 10 10043 10.so.0.43[.0] - * 1.2.35 13 10235 12.so.0.35[.0] - * 1.2.36beta01-05 13 10236 12.so.0.36[.0] - * 1.2.36rc01 13 10236 12.so.0.36[.0] - * 1.0.44 10 10044 10.so.0.44[.0] - * 1.2.36 13 10236 12.so.0.36[.0] - * 1.2.37beta01-03 13 10237 12.so.0.37[.0] - * 1.2.37rc01 13 10237 12.so.0.37[.0] - * 1.2.37 13 10237 12.so.0.37[.0] - * - * Henceforth the source version will match the shared-library major - * and minor numbers; the shared-library major version number will be - * used for changes in backward compatibility, as it is intended. The - * PNG_LIBPNG_VER macro, which is not used within libpng but is available - * for applications, is an unsigned integer of the form xyyzz corresponding - * to the source version x.y.z (leading zeros in y and z). Beta versions - * were given the previous public release number plus a letter, until - * version 1.0.6j; from then on they were given the upcoming public - * release number plus "betaNN" or "rcNN". - * - * Binary incompatibility exists only when applications make direct access - * to the info_ptr or png_ptr members through png.h, and the compiled - * application is loaded with a different version of the library. - * - * DLLNUM will change each time there are forward or backward changes - * in binary compatibility (e.g., when a new feature is added). - * - * See libpng.txt or libpng.3 for more information. The PNG specification - * is available as a W3C Recommendation and as an ISO Specification, - * <http://www.w3.org/TR/2003/REC-PNG-20031110/ - */ - -/* - * COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: - * - * If you modify libpng you may insert additional notices immediately following - * this sentence. - * - * libpng versions 1.2.6, August 15, 2004, through 1.2.37, June 4, 2009, are - * Copyright (c) 2004, 2006-2009 Glenn Randers-Pehrson, and are - * distributed according to the same disclaimer and license as libpng-1.2.5 - * with the following individual added to the list of Contributing Authors: - * - * Cosmin Truta - * - * libpng versions 1.0.7, July 1, 2000, through 1.2.5, October 3, 2002, are - * Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are - * distributed according to the same disclaimer and license as libpng-1.0.6 - * with the following individuals added to the list of Contributing Authors: - * - * Simon-Pierre Cadieux - * Eric S. Raymond - * Gilles Vollant - * - * and with the following additions to the disclaimer: - * - * There is no warranty against interference with your enjoyment of the - * library or against infringement. There is no warranty that our - * efforts or the library will fulfill any of your particular purposes - * or needs. This library is provided with all faults, and the entire - * risk of satisfactory quality, performance, accuracy, and effort is with - * the user. - * - * libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are - * Copyright (c) 1998, 1999, 2000 Glenn Randers-Pehrson, and are - * distributed according to the same disclaimer and license as libpng-0.96, - * with the following individuals added to the list of Contributing Authors: - * - * Tom Lane - * Glenn Randers-Pehrson - * Willem van Schaik - * - * libpng versions 0.89, June 1996, through 0.96, May 1997, are - * Copyright (c) 1996, 1997 Andreas Dilger - * Distributed according to the same disclaimer and license as libpng-0.88, - * with the following individuals added to the list of Contributing Authors: - * - * John Bowler - * Kevin Bracey - * Sam Bushell - * Magnus Holmgren - * Greg Roelofs - * Tom Tanner - * - * libpng versions 0.5, May 1995, through 0.88, January 1996, are - * Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. - * - * For the purposes of this copyright and license, "Contributing Authors" - * is defined as the following set of individuals: - * - * Andreas Dilger - * Dave Martindale - * Guy Eric Schalnat - * Paul Schmidt - * Tim Wegner - * - * The PNG Reference Library is supplied "AS IS". The Contributing Authors - * and Group 42, Inc. disclaim all warranties, expressed or implied, - * including, without limitation, the warranties of merchantability and of - * fitness for any purpose. The Contributing Authors and Group 42, Inc. - * assume no liability for direct, indirect, incidental, special, exemplary, - * or consequential damages, which may result from the use of the PNG - * Reference Library, even if advised of the possibility of such damage. - * - * Permission is hereby granted to use, copy, modify, and distribute this - * source code, or portions hereof, for any purpose, without fee, subject - * to the following restrictions: - * - * 1. The origin of this source code must not be misrepresented. - * - * 2. Altered versions must be plainly marked as such and - * must not be misrepresented as being the original source. - * - * 3. This Copyright notice may not be removed or altered from - * any source or altered source distribution. - * - * The Contributing Authors and Group 42, Inc. specifically permit, without - * fee, and encourage the use of this source code as a component to - * supporting the PNG file format in commercial products. If you use this - * source code in a product, acknowledgment is not required but would be - * appreciated. - */ - -/* - * A "png_get_copyright" function is available, for convenient use in "about" - * boxes and the like: - * - * printf("%s",png_get_copyright(NULL)); - * - * Also, the PNG logo (in PNG format, of course) is supplied in the - * files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). - */ - -/* - * Libpng is OSI Certified Open Source Software. OSI Certified is a - * certification mark of the Open Source Initiative. - */ - -/* - * The contributing authors would like to thank all those who helped - * with testing, bug fixes, and patience. This wouldn't have been - * possible without all of you. - * - * Thanks to Frank J. T. Wojcik for helping with the documentation. - */ - -/* - * Y2K compliance in libpng: - * ========================= - * - * June 4, 2009 - * - * Since the PNG Development group is an ad-hoc body, we can't make - * an official declaration. - * - * This is your unofficial assurance that libpng from version 0.71 and - * upward through 1.2.37 are Y2K compliant. It is my belief that earlier - * versions were also Y2K compliant. - * - * Libpng only has three year fields. One is a 2-byte unsigned integer - * that will hold years up to 65535. The other two hold the date in text - * format, and will hold years up to 9999. - * - * The integer is - * "png_uint_16 year" in png_time_struct. - * - * The strings are - * "png_charp time_buffer" in png_struct and - * "near_time_buffer", which is a local character string in png.c. - * - * There are seven time-related functions: - * png.c: png_convert_to_rfc_1123() in png.c - * (formerly png_convert_to_rfc_1152() in error) - * png_convert_from_struct_tm() in pngwrite.c, called in pngwrite.c - * png_convert_from_time_t() in pngwrite.c - * png_get_tIME() in pngget.c - * png_handle_tIME() in pngrutil.c, called in pngread.c - * png_set_tIME() in pngset.c - * png_write_tIME() in pngwutil.c, called in pngwrite.c - * - * All handle dates properly in a Y2K environment. The - * png_convert_from_time_t() function calls gmtime() to convert from system - * clock time, which returns (year - 1900), which we properly convert to - * the full 4-digit year. There is a possibility that applications using - * libpng are not passing 4-digit years into the png_convert_to_rfc_1123() - * function, or that they are incorrectly passing only a 2-digit year - * instead of "year - 1900" into the png_convert_from_struct_tm() function, - * but this is not under our control. The libpng documentation has always - * stated that it works with 4-digit years, and the APIs have been - * documented as such. - * - * The tIME chunk itself is also Y2K compliant. It uses a 2-byte unsigned - * integer to hold the year, and can hold years as large as 65535. - * - * zlib, upon which libpng depends, is also Y2K compliant. It contains - * no date-related code. - * - * Glenn Randers-Pehrson - * libpng maintainer - * PNG Development Group - */ - -#ifndef PNG_H -#define PNG_H - -/* This is not the place to learn how to use libpng. The file libpng.txt - * describes how to use libpng, and the file example.c summarizes it - * with some code on which to build. This file is useful for looking - * at the actual function definitions and structure components. - */ - -/* Version information for png.h - this should match the version in png.c */ -#define PNG_LIBPNG_VER_STRING "1.2.37" -#define PNG_HEADER_VERSION_STRING \ - " libpng version 1.2.37 - June 4, 2009\n" - -#define PNG_LIBPNG_VER_SONUM 0 -#define PNG_LIBPNG_VER_DLLNUM 13 - -/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */ -#define PNG_LIBPNG_VER_MAJOR 1 -#define PNG_LIBPNG_VER_MINOR 2 -#define PNG_LIBPNG_VER_RELEASE 37 -/* This should match the numeric part of the final component of - * PNG_LIBPNG_VER_STRING, omitting any leading zero: */ - -#define PNG_LIBPNG_VER_BUILD 0 - -/* Release Status */ -#define PNG_LIBPNG_BUILD_ALPHA 1 -#define PNG_LIBPNG_BUILD_BETA 2 -#define PNG_LIBPNG_BUILD_RC 3 -#define PNG_LIBPNG_BUILD_STABLE 4 -#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7 - -/* Release-Specific Flags */ -#define PNG_LIBPNG_BUILD_PATCH 8 /* Can be OR'ed with - PNG_LIBPNG_BUILD_STABLE only */ -#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with - PNG_LIBPNG_BUILD_SPECIAL */ -#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with - PNG_LIBPNG_BUILD_PRIVATE */ - -#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE - -/* Careful here. At one time, Guy wanted to use 082, but that would be octal. - * We must not include leading zeros. - * Versions 0.7 through 1.0.0 were in the range 0 to 100 here (only - * version 1.0.0 was mis-numbered 100 instead of 10000). From - * version 1.0.1 it's xxyyzz, where x=major, y=minor, z=release */ -#define PNG_LIBPNG_VER 10237 /* 1.2.37 */ - -#ifndef PNG_VERSION_INFO_ONLY -/* include the compression library's header */ -#include "zlib.h" -#endif - -/* include all user configurable info, including optional assembler routines */ -#include "pngconf.h" - -/* - * Added at libpng-1.2.8 */ -/* Ref MSDN: Private as priority over Special - * VS_FF_PRIVATEBUILD File *was not* built using standard release - * procedures. If this value is given, the StringFileInfo block must - * contain a PrivateBuild string. - * - * VS_FF_SPECIALBUILD File *was* built by the original company using - * standard release procedures but is a variation of the standard - * file of the same version number. If this value is given, the - * StringFileInfo block must contain a SpecialBuild string. - */ - -#if defined(PNG_USER_PRIVATEBUILD) -# define PNG_LIBPNG_BUILD_TYPE \ - (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE) -#else -# if defined(PNG_LIBPNG_SPECIALBUILD) -# define PNG_LIBPNG_BUILD_TYPE \ - (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL) -# else -# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE) -# endif -#endif - -#ifndef PNG_VERSION_INFO_ONLY - -/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* This file is arranged in several sections. The first section contains - * structure and type definitions. The second section contains the external - * library functions, while the third has the internal library functions, - * which applications aren't expected to use directly. - */ - -#ifndef PNG_NO_TYPECAST_NULL -#define int_p_NULL (int *)NULL -#define png_bytep_NULL (png_bytep)NULL -#define png_bytepp_NULL (png_bytepp)NULL -#define png_doublep_NULL (png_doublep)NULL -#define png_error_ptr_NULL (png_error_ptr)NULL -#define png_flush_ptr_NULL (png_flush_ptr)NULL -#define png_free_ptr_NULL (png_free_ptr)NULL -#define png_infopp_NULL (png_infopp)NULL -#define png_malloc_ptr_NULL (png_malloc_ptr)NULL -#define png_read_status_ptr_NULL (png_read_status_ptr)NULL -#define png_rw_ptr_NULL (png_rw_ptr)NULL -#define png_structp_NULL (png_structp)NULL -#define png_uint_16p_NULL (png_uint_16p)NULL -#define png_voidp_NULL (png_voidp)NULL -#define png_write_status_ptr_NULL (png_write_status_ptr)NULL -#else -#define int_p_NULL NULL -#define png_bytep_NULL NULL -#define png_bytepp_NULL NULL -#define png_doublep_NULL NULL -#define png_error_ptr_NULL NULL -#define png_flush_ptr_NULL NULL -#define png_free_ptr_NULL NULL -#define png_infopp_NULL NULL -#define png_malloc_ptr_NULL NULL -#define png_read_status_ptr_NULL NULL -#define png_rw_ptr_NULL NULL -#define png_structp_NULL NULL -#define png_uint_16p_NULL NULL -#define png_voidp_NULL NULL -#define png_write_status_ptr_NULL NULL -#endif - -/* variables declared in png.c - only it needs to define PNG_NO_EXTERN */ -#if !defined(PNG_NO_EXTERN) || defined(PNG_ALWAYS_EXTERN) -/* Version information for C files, stored in png.c. This had better match - * the version above. - */ -#ifdef PNG_USE_GLOBAL_ARRAYS -PNG_EXPORT_VAR (PNG_CONST char) png_libpng_ver[18]; - /* need room for 99.99.99beta99z */ -#else -#define png_libpng_ver png_get_header_ver(NULL) -#endif - -#ifdef PNG_USE_GLOBAL_ARRAYS -/* This was removed in version 1.0.5c */ -/* Structures to facilitate easy interlacing. See png.c for more details */ -PNG_EXPORT_VAR (PNG_CONST int FARDATA) png_pass_start[7]; -PNG_EXPORT_VAR (PNG_CONST int FARDATA) png_pass_inc[7]; -PNG_EXPORT_VAR (PNG_CONST int FARDATA) png_pass_ystart[7]; -PNG_EXPORT_VAR (PNG_CONST int FARDATA) png_pass_yinc[7]; -PNG_EXPORT_VAR (PNG_CONST int FARDATA) png_pass_mask[7]; -PNG_EXPORT_VAR (PNG_CONST int FARDATA) png_pass_dsp_mask[7]; -/* This isn't currently used. If you need it, see png.c for more details. -PNG_EXPORT_VAR (PNG_CONST int FARDATA) png_pass_height[7]; -*/ -#endif - -#endif /* PNG_NO_EXTERN */ - -/* Three color definitions. The order of the red, green, and blue, (and the - * exact size) is not important, although the size of the fields need to - * be png_byte or png_uint_16 (as defined below). - */ -typedef struct png_color_struct -{ - png_byte red; - png_byte green; - png_byte blue; -} png_color; -typedef png_color FAR * png_colorp; -typedef png_color FAR * FAR * png_colorpp; - -typedef struct png_color_16_struct -{ - png_byte index; /* used for palette files */ - png_uint_16 red; /* for use in red green blue files */ - png_uint_16 green; - png_uint_16 blue; - png_uint_16 gray; /* for use in grayscale files */ -} png_color_16; -typedef png_color_16 FAR * png_color_16p; -typedef png_color_16 FAR * FAR * png_color_16pp; - -typedef struct png_color_8_struct -{ - png_byte red; /* for use in red green blue files */ - png_byte green; - png_byte blue; - png_byte gray; /* for use in grayscale files */ - png_byte alpha; /* for alpha channel files */ -} png_color_8; -typedef png_color_8 FAR * png_color_8p; -typedef png_color_8 FAR * FAR * png_color_8pp; - -/* - * The following two structures are used for the in-core representation - * of sPLT chunks. - */ -typedef struct png_sPLT_entry_struct -{ - png_uint_16 red; - png_uint_16 green; - png_uint_16 blue; - png_uint_16 alpha; - png_uint_16 frequency; -} png_sPLT_entry; -typedef png_sPLT_entry FAR * png_sPLT_entryp; -typedef png_sPLT_entry FAR * FAR * png_sPLT_entrypp; - -/* When the depth of the sPLT palette is 8 bits, the color and alpha samples - * occupy the LSB of their respective members, and the MSB of each member - * is zero-filled. The frequency member always occupies the full 16 bits. - */ - -typedef struct png_sPLT_struct -{ - png_charp name; /* palette name */ - png_byte depth; /* depth of palette samples */ - png_sPLT_entryp entries; /* palette entries */ - png_int_32 nentries; /* number of palette entries */ -} png_sPLT_t; -typedef png_sPLT_t FAR * png_sPLT_tp; -typedef png_sPLT_t FAR * FAR * png_sPLT_tpp; - -#ifdef PNG_TEXT_SUPPORTED -/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file, - * and whether that contents is compressed or not. The "key" field - * points to a regular zero-terminated C string. The "text", "lang", and - * "lang_key" fields can be regular C strings, empty strings, or NULL pointers. - * However, the * structure returned by png_get_text() will always contain - * regular zero-terminated C strings (possibly empty), never NULL pointers, - * so they can be safely used in printf() and other string-handling functions. - */ -typedef struct png_text_struct -{ - int compression; /* compression value: - -1: tEXt, none - 0: zTXt, deflate - 1: iTXt, none - 2: iTXt, deflate */ - png_charp key; /* keyword, 1-79 character description of "text" */ - png_charp text; /* comment, may be an empty string (ie "") - or a NULL pointer */ - png_size_t text_length; /* length of the text string */ -#ifdef PNG_iTXt_SUPPORTED - png_size_t itxt_length; /* length of the itxt string */ - png_charp lang; /* language code, 0-79 characters - or a NULL pointer */ - png_charp lang_key; /* keyword translated UTF-8 string, 0 or more - chars or a NULL pointer */ -#endif -} png_text; -typedef png_text FAR * png_textp; -typedef png_text FAR * FAR * png_textpp; -#endif - -/* Supported compression types for text in PNG files (tEXt, and zTXt). - * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */ -#define PNG_TEXT_COMPRESSION_NONE_WR -3 -#define PNG_TEXT_COMPRESSION_zTXt_WR -2 -#define PNG_TEXT_COMPRESSION_NONE -1 -#define PNG_TEXT_COMPRESSION_zTXt 0 -#define PNG_ITXT_COMPRESSION_NONE 1 -#define PNG_ITXT_COMPRESSION_zTXt 2 -#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */ - -/* png_time is a way to hold the time in an machine independent way. - * Two conversions are provided, both from time_t and struct tm. There - * is no portable way to convert to either of these structures, as far - * as I know. If you know of a portable way, send it to me. As a side - * note - PNG has always been Year 2000 compliant! - */ -typedef struct png_time_struct -{ - png_uint_16 year; /* full year, as in, 1995 */ - png_byte month; /* month of year, 1 - 12 */ - png_byte day; /* day of month, 1 - 31 */ - png_byte hour; /* hour of day, 0 - 23 */ - png_byte minute; /* minute of hour, 0 - 59 */ - png_byte second; /* second of minute, 0 - 60 (for leap seconds) */ -} png_time; -typedef png_time FAR * png_timep; -typedef png_time FAR * FAR * png_timepp; - -#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) -/* png_unknown_chunk is a structure to hold queued chunks for which there is - * no specific support. The idea is that we can use this to queue - * up private chunks for output even though the library doesn't actually - * know about their semantics. - */ -#define PNG_CHUNK_NAME_LENGTH 5 -typedef struct png_unknown_chunk_t -{ - png_byte name[PNG_CHUNK_NAME_LENGTH]; - png_byte *data; - png_size_t size; - - /* libpng-using applications should NOT directly modify this byte. */ - png_byte location; /* mode of operation at read time */ -} -png_unknown_chunk; -typedef png_unknown_chunk FAR * png_unknown_chunkp; -typedef png_unknown_chunk FAR * FAR * png_unknown_chunkpp; -#endif - -/* png_info is a structure that holds the information in a PNG file so - * that the application can find out the characteristics of the image. - * If you are reading the file, this structure will tell you what is - * in the PNG file. If you are writing the file, fill in the information - * you want to put into the PNG file, then call png_write_info(). - * The names chosen should be very close to the PNG specification, so - * consult that document for information about the meaning of each field. - * - * With libpng < 0.95, it was only possible to directly set and read the - * the values in the png_info_struct, which meant that the contents and - * order of the values had to remain fixed. With libpng 0.95 and later, - * however, there are now functions that abstract the contents of - * png_info_struct from the application, so this makes it easier to use - * libpng with dynamic libraries, and even makes it possible to use - * libraries that don't have all of the libpng ancillary chunk-handing - * functionality. - * - * In any case, the order of the parameters in png_info_struct should NOT - * be changed for as long as possible to keep compatibility with applications - * that use the old direct-access method with png_info_struct. - * - * The following members may have allocated storage attached that should be - * cleaned up before the structure is discarded: palette, trans, text, - * pcal_purpose, pcal_units, pcal_params, hist, iccp_name, iccp_profile, - * splt_palettes, scal_unit, row_pointers, and unknowns. By default, these - * are automatically freed when the info structure is deallocated, if they were - * allocated internally by libpng. This behavior can be changed by means - * of the png_data_freer() function. - * - * More allocation details: all the chunk-reading functions that - * change these members go through the corresponding png_set_* - * functions. A function to clear these members is available: see - * png_free_data(). The png_set_* functions do not depend on being - * able to point info structure members to any of the storage they are - * passed (they make their own copies), EXCEPT that the png_set_text - * functions use the same storage passed to them in the text_ptr or - * itxt_ptr structure argument, and the png_set_rows and png_set_unknowns - * functions do not make their own copies. - */ -typedef struct png_info_struct -{ - /* the following are necessary for every PNG file */ - png_uint_32 width; /* width of image in pixels (from IHDR) */ - png_uint_32 height; /* height of image in pixels (from IHDR) */ - png_uint_32 valid; /* valid chunk data (see PNG_INFO_ below) */ - png_uint_32 rowbytes; /* bytes needed to hold an untransformed row */ - png_colorp palette; /* array of color values (valid & PNG_INFO_PLTE) */ - png_uint_16 num_palette; /* number of color entries in "palette" (PLTE) */ - png_uint_16 num_trans; /* number of transparent palette color (tRNS) */ - png_byte bit_depth; /* 1, 2, 4, 8, or 16 bits/channel (from IHDR) */ - png_byte color_type; /* see PNG_COLOR_TYPE_ below (from IHDR) */ - /* The following three should have been named *_method not *_type */ - png_byte compression_type; /* must be PNG_COMPRESSION_TYPE_BASE (IHDR) */ - png_byte filter_type; /* must be PNG_FILTER_TYPE_BASE (from IHDR) */ - png_byte interlace_type; /* One of PNG_INTERLACE_NONE, PNG_INTERLACE_ADAM7 */ - - /* The following is informational only on read, and not used on writes. */ - png_byte channels; /* number of data channels per pixel (1, 2, 3, 4) */ - png_byte pixel_depth; /* number of bits per pixel */ - png_byte spare_byte; /* to align the data, and for future use */ - png_byte signature[8]; /* magic bytes read by libpng from start of file */ - - /* The rest of the data is optional. If you are reading, check the - * valid field to see if the information in these are valid. If you - * are writing, set the valid field to those chunks you want written, - * and initialize the appropriate fields below. - */ - -#if defined(PNG_gAMA_SUPPORTED) && defined(PNG_FLOATING_POINT_SUPPORTED) - /* The gAMA chunk describes the gamma characteristics of the system - * on which the image was created, normally in the range [1.0, 2.5]. - * Data is valid if (valid & PNG_INFO_gAMA) is non-zero. - */ - float gamma; /* gamma value of image, if (valid & PNG_INFO_gAMA) */ -#endif - -#if defined(PNG_sRGB_SUPPORTED) - /* GR-P, 0.96a */ - /* Data valid if (valid & PNG_INFO_sRGB) non-zero. */ - png_byte srgb_intent; /* sRGB rendering intent [0, 1, 2, or 3] */ -#endif - -#if defined(PNG_TEXT_SUPPORTED) - /* The tEXt, and zTXt chunks contain human-readable textual data in - * uncompressed, compressed, and optionally compressed forms, respectively. - * The data in "text" is an array of pointers to uncompressed, - * null-terminated C strings. Each chunk has a keyword that describes the - * textual data contained in that chunk. Keywords are not required to be - * unique, and the text string may be empty. Any number of text chunks may - * be in an image. - */ - int num_text; /* number of comments read/to write */ - int max_text; /* current size of text array */ - png_textp text; /* array of comments read/to write */ -#endif /* PNG_TEXT_SUPPORTED */ - -#if defined(PNG_tIME_SUPPORTED) - /* The tIME chunk holds the last time the displayed image data was - * modified. See the png_time struct for the contents of this struct. - */ - png_time mod_time; -#endif - -#if defined(PNG_sBIT_SUPPORTED) - /* The sBIT chunk specifies the number of significant high-order bits - * in the pixel data. Values are in the range [1, bit_depth], and are - * only specified for the channels in the pixel data. The contents of - * the low-order bits is not specified. Data is valid if - * (valid & PNG_INFO_sBIT) is non-zero. - */ - png_color_8 sig_bit; /* significant bits in color channels */ -#endif - -#if defined(PNG_tRNS_SUPPORTED) || defined(PNG_READ_EXPAND_SUPPORTED) || \ -defined(PNG_READ_BACKGROUND_SUPPORTED) - /* The tRNS chunk supplies transparency data for paletted images and - * other image types that don't need a full alpha channel. There are - * "num_trans" transparency values for a paletted image, stored in the - * same order as the palette colors, starting from index 0. Values - * for the data are in the range [0, 255], ranging from fully transparent - * to fully opaque, respectively. For non-paletted images, there is a - * single color specified that should be treated as fully transparent. - * Data is valid if (valid & PNG_INFO_tRNS) is non-zero. - */ - png_bytep trans; /* transparent values for paletted image */ - png_color_16 trans_values; /* transparent color for non-palette image */ -#endif - -#if defined(PNG_bKGD_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) - /* The bKGD chunk gives the suggested image background color if the - * display program does not have its own background color and the image - * is needs to composited onto a background before display. The colors - * in "background" are normally in the same color space/depth as the - * pixel data. Data is valid if (valid & PNG_INFO_bKGD) is non-zero. - */ - png_color_16 background; -#endif - -#if defined(PNG_oFFs_SUPPORTED) - /* The oFFs chunk gives the offset in "offset_unit_type" units rightwards - * and downwards from the top-left corner of the display, page, or other - * application-specific co-ordinate space. See the PNG_OFFSET_ defines - * below for the unit types. Valid if (valid & PNG_INFO_oFFs) non-zero. - */ - png_int_32 x_offset; /* x offset on page */ - png_int_32 y_offset; /* y offset on page */ - png_byte offset_unit_type; /* offset units type */ -#endif - -#if defined(PNG_pHYs_SUPPORTED) - /* The pHYs chunk gives the physical pixel density of the image for - * display or printing in "phys_unit_type" units (see PNG_RESOLUTION_ - * defines below). Data is valid if (valid & PNG_INFO_pHYs) is non-zero. - */ - png_uint_32 x_pixels_per_unit; /* horizontal pixel density */ - png_uint_32 y_pixels_per_unit; /* vertical pixel density */ - png_byte phys_unit_type; /* resolution type (see PNG_RESOLUTION_ below) */ -#endif - -#if defined(PNG_hIST_SUPPORTED) - /* The hIST chunk contains the relative frequency or importance of the - * various palette entries, so that a viewer can intelligently select a - * reduced-color palette, if required. Data is an array of "num_palette" - * values in the range [0,65535]. Data valid if (valid & PNG_INFO_hIST) - * is non-zero. - */ - png_uint_16p hist; -#endif - -#ifdef PNG_cHRM_SUPPORTED - /* The cHRM chunk describes the CIE color characteristics of the monitor - * on which the PNG was created. This data allows the viewer to do gamut - * mapping of the input image to ensure that the viewer sees the same - * colors in the image as the creator. Values are in the range - * [0.0, 0.8]. Data valid if (valid & PNG_INFO_cHRM) non-zero. - */ -#ifdef PNG_FLOATING_POINT_SUPPORTED - float x_white; - float y_white; - float x_red; - float y_red; - float x_green; - float y_green; - float x_blue; - float y_blue; -#endif -#endif - -#if defined(PNG_pCAL_SUPPORTED) - /* The pCAL chunk describes a transformation between the stored pixel - * values and original physical data values used to create the image. - * The integer range [0, 2^bit_depth - 1] maps to the floating-point - * range given by [pcal_X0, pcal_X1], and are further transformed by a - * (possibly non-linear) transformation function given by "pcal_type" - * and "pcal_params" into "pcal_units". Please see the PNG_EQUATION_ - * defines below, and the PNG-Group's PNG extensions document for a - * complete description of the transformations and how they should be - * implemented, and for a description of the ASCII parameter strings. - * Data values are valid if (valid & PNG_INFO_pCAL) non-zero. - */ - png_charp pcal_purpose; /* pCAL chunk description string */ - png_int_32 pcal_X0; /* minimum value */ - png_int_32 pcal_X1; /* maximum value */ - png_charp pcal_units; /* Latin-1 string giving physical units */ - png_charpp pcal_params; /* ASCII strings containing parameter values */ - png_byte pcal_type; /* equation type (see PNG_EQUATION_ below) */ - png_byte pcal_nparams; /* number of parameters given in pcal_params */ -#endif - -/* New members added in libpng-1.0.6 */ -#ifdef PNG_FREE_ME_SUPPORTED - png_uint_32 free_me; /* flags items libpng is responsible for freeing */ -#endif - -#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) - /* storage for unknown chunks that the library doesn't recognize. */ - png_unknown_chunkp unknown_chunks; - png_size_t unknown_chunks_num; -#endif - -#if defined(PNG_iCCP_SUPPORTED) - /* iCCP chunk data. */ - png_charp iccp_name; /* profile name */ - png_charp iccp_profile; /* International Color Consortium profile data */ - /* Note to maintainer: should be png_bytep */ - png_uint_32 iccp_proflen; /* ICC profile data length */ - png_byte iccp_compression; /* Always zero */ -#endif - -#if defined(PNG_sPLT_SUPPORTED) - /* data on sPLT chunks (there may be more than one). */ - png_sPLT_tp splt_palettes; - png_uint_32 splt_palettes_num; -#endif - -#if defined(PNG_sCAL_SUPPORTED) - /* The sCAL chunk describes the actual physical dimensions of the - * subject matter of the graphic. The chunk contains a unit specification - * a byte value, and two ASCII strings representing floating-point - * values. The values are width and height corresponsing to one pixel - * in the image. This external representation is converted to double - * here. Data values are valid if (valid & PNG_INFO_sCAL) is non-zero. - */ - png_byte scal_unit; /* unit of physical scale */ -#ifdef PNG_FLOATING_POINT_SUPPORTED - double scal_pixel_width; /* width of one pixel */ - double scal_pixel_height; /* height of one pixel */ -#endif -#ifdef PNG_FIXED_POINT_SUPPORTED - png_charp scal_s_width; /* string containing height */ - png_charp scal_s_height; /* string containing width */ -#endif -#endif - -#if defined(PNG_INFO_IMAGE_SUPPORTED) - /* Memory has been allocated if (valid & PNG_ALLOCATED_INFO_ROWS) non-zero */ - /* Data valid if (valid & PNG_INFO_IDAT) non-zero */ - png_bytepp row_pointers; /* the image bits */ -#endif - -#if defined(PNG_FIXED_POINT_SUPPORTED) && defined(PNG_gAMA_SUPPORTED) - png_fixed_point int_gamma; /* gamma of image, if (valid & PNG_INFO_gAMA) */ -#endif - -#if defined(PNG_cHRM_SUPPORTED) && defined(PNG_FIXED_POINT_SUPPORTED) - png_fixed_point int_x_white; - png_fixed_point int_y_white; - png_fixed_point int_x_red; - png_fixed_point int_y_red; - png_fixed_point int_x_green; - png_fixed_point int_y_green; - png_fixed_point int_x_blue; - png_fixed_point int_y_blue; -#endif - -} png_info; - -typedef png_info FAR * png_infop; -typedef png_info FAR * FAR * png_infopp; - -/* Maximum positive integer used in PNG is (2^31)-1 */ -#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL) -#define PNG_UINT_32_MAX ((png_uint_32)(-1)) -#define PNG_SIZE_MAX ((png_size_t)(-1)) -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -/* PNG_MAX_UINT is deprecated; use PNG_UINT_31_MAX instead. */ -#define PNG_MAX_UINT PNG_UINT_31_MAX -#endif - -/* These describe the color_type field in png_info. */ -/* color type masks */ -#define PNG_COLOR_MASK_PALETTE 1 -#define PNG_COLOR_MASK_COLOR 2 -#define PNG_COLOR_MASK_ALPHA 4 - -/* color types. Note that not all combinations are legal */ -#define PNG_COLOR_TYPE_GRAY 0 -#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE) -#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR) -#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA) -#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA) -/* aliases */ -#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA -#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA - -/* This is for compression type. PNG 1.0-1.2 only define the single type. */ -#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */ -#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE - -/* This is for filter type. PNG 1.0-1.2 only define the single type. */ -#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */ -#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */ -#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE - -/* These are for the interlacing type. These values should NOT be changed. */ -#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */ -#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */ -#define PNG_INTERLACE_LAST 2 /* Not a valid value */ - -/* These are for the oFFs chunk. These values should NOT be changed. */ -#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */ -#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */ -#define PNG_OFFSET_LAST 2 /* Not a valid value */ - -/* These are for the pCAL chunk. These values should NOT be changed. */ -#define PNG_EQUATION_LINEAR 0 /* Linear transformation */ -#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */ -#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */ -#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */ -#define PNG_EQUATION_LAST 4 /* Not a valid value */ - -/* These are for the sCAL chunk. These values should NOT be changed. */ -#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */ -#define PNG_SCALE_METER 1 /* meters per pixel */ -#define PNG_SCALE_RADIAN 2 /* radians per pixel */ -#define PNG_SCALE_LAST 3 /* Not a valid value */ - -/* These are for the pHYs chunk. These values should NOT be changed. */ -#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */ -#define PNG_RESOLUTION_METER 1 /* pixels/meter */ -#define PNG_RESOLUTION_LAST 2 /* Not a valid value */ - -/* These are for the sRGB chunk. These values should NOT be changed. */ -#define PNG_sRGB_INTENT_PERCEPTUAL 0 -#define PNG_sRGB_INTENT_RELATIVE 1 -#define PNG_sRGB_INTENT_SATURATION 2 -#define PNG_sRGB_INTENT_ABSOLUTE 3 -#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */ - -/* This is for text chunks */ -#define PNG_KEYWORD_MAX_LENGTH 79 - -/* Maximum number of entries in PLTE/sPLT/tRNS arrays */ -#define PNG_MAX_PALETTE_LENGTH 256 - -/* These determine if an ancillary chunk's data has been successfully read - * from the PNG header, or if the application has filled in the corresponding - * data in the info_struct to be written into the output file. The values - * of the PNG_INFO_<chunk> defines should NOT be changed. - */ -#define PNG_INFO_gAMA 0x0001 -#define PNG_INFO_sBIT 0x0002 -#define PNG_INFO_cHRM 0x0004 -#define PNG_INFO_PLTE 0x0008 -#define PNG_INFO_tRNS 0x0010 -#define PNG_INFO_bKGD 0x0020 -#define PNG_INFO_hIST 0x0040 -#define PNG_INFO_pHYs 0x0080 -#define PNG_INFO_oFFs 0x0100 -#define PNG_INFO_tIME 0x0200 -#define PNG_INFO_pCAL 0x0400 -#define PNG_INFO_sRGB 0x0800 /* GR-P, 0.96a */ -#define PNG_INFO_iCCP 0x1000 /* ESR, 1.0.6 */ -#define PNG_INFO_sPLT 0x2000 /* ESR, 1.0.6 */ -#define PNG_INFO_sCAL 0x4000 /* ESR, 1.0.6 */ -#define PNG_INFO_IDAT 0x8000L /* ESR, 1.0.6 */ - -/* This is used for the transformation routines, as some of them - * change these values for the row. It also should enable using - * the routines for other purposes. - */ -typedef struct png_row_info_struct -{ - png_uint_32 width; /* width of row */ - png_uint_32 rowbytes; /* number of bytes in row */ - png_byte color_type; /* color type of row */ - png_byte bit_depth; /* bit depth of row */ - png_byte channels; /* number of channels (1, 2, 3, or 4) */ - png_byte pixel_depth; /* bits per pixel (depth * channels) */ -} png_row_info; - -typedef png_row_info FAR * png_row_infop; -typedef png_row_info FAR * FAR * png_row_infopp; - -/* These are the function types for the I/O functions and for the functions - * that allow the user to override the default I/O functions with his or her - * own. The png_error_ptr type should match that of user-supplied warning - * and error functions, while the png_rw_ptr type should match that of the - * user read/write data functions. - */ -typedef struct png_struct_def png_struct; -typedef png_struct FAR * png_structp; - -typedef void (PNGAPI *png_error_ptr) PNGARG((png_structp, png_const_charp)); -typedef void (PNGAPI *png_rw_ptr) PNGARG((png_structp, png_bytep, png_size_t)); -typedef void (PNGAPI *png_flush_ptr) PNGARG((png_structp)); -typedef void (PNGAPI *png_read_status_ptr) PNGARG((png_structp, png_uint_32, - int)); -typedef void (PNGAPI *png_write_status_ptr) PNGARG((png_structp, png_uint_32, - int)); - -#ifdef PNG_PROGRESSIVE_READ_SUPPORTED -typedef void (PNGAPI *png_progressive_info_ptr) PNGARG((png_structp, png_infop)); -typedef void (PNGAPI *png_progressive_end_ptr) PNGARG((png_structp, png_infop)); -typedef void (PNGAPI *png_progressive_row_ptr) PNGARG((png_structp, png_bytep, - png_uint_32, int)); -#endif - -#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_LEGACY_SUPPORTED) -typedef void (PNGAPI *png_user_transform_ptr) PNGARG((png_structp, - png_row_infop, png_bytep)); -#endif - -#if defined(PNG_USER_CHUNKS_SUPPORTED) -typedef int (PNGAPI *png_user_chunk_ptr) PNGARG((png_structp, png_unknown_chunkp)); -#endif -#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) -typedef void (PNGAPI *png_unknown_chunk_ptr) PNGARG((png_structp)); -#endif - -/* Transform masks for the high-level interface */ -#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ -#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ -#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ -#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ -#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ -#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ -#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ -#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ -#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ -#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ -#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ -#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ -#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* WRITE only, deprecated */ -/* Added to libpng-1.2.34 */ -#define PNG_TRANSFORM_STRIP_FILLER_BEFORE 0x0800 /* WRITE only */ -#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* WRITE only */ - -/* Flags for MNG supported features */ -#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 -#define PNG_FLAG_MNG_FILTER_64 0x04 -#define PNG_ALL_MNG_FEATURES 0x05 - -typedef png_voidp (*png_malloc_ptr) PNGARG((png_structp, png_size_t)); -typedef void (*png_free_ptr) PNGARG((png_structp, png_voidp)); - -/* The structure that holds the information to read and write PNG files. - * The only people who need to care about what is inside of this are the - * people who will be modifying the library for their own special needs. - * It should NOT be accessed directly by an application, except to store - * the jmp_buf. - */ - -struct png_struct_def -{ -#ifdef PNG_SETJMP_SUPPORTED - jmp_buf jmpbuf; /* used in png_error */ -#endif - png_error_ptr error_fn; /* function for printing errors and aborting */ - png_error_ptr warning_fn; /* function for printing warnings */ - png_voidp error_ptr; /* user supplied struct for error functions */ - png_rw_ptr write_data_fn; /* function for writing output data */ - png_rw_ptr read_data_fn; /* function for reading input data */ - png_voidp io_ptr; /* ptr to application struct for I/O functions */ - -#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) - png_user_transform_ptr read_user_transform_fn; /* user read transform */ -#endif - -#if defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) - png_user_transform_ptr write_user_transform_fn; /* user write transform */ -#endif - -/* These were added in libpng-1.0.2 */ -#if defined(PNG_USER_TRANSFORM_PTR_SUPPORTED) -#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) - png_voidp user_transform_ptr; /* user supplied struct for user transform */ - png_byte user_transform_depth; /* bit depth of user transformed pixels */ - png_byte user_transform_channels; /* channels in user transformed pixels */ -#endif -#endif - - png_uint_32 mode; /* tells us where we are in the PNG file */ - png_uint_32 flags; /* flags indicating various things to libpng */ - png_uint_32 transformations; /* which transformations to perform */ - - z_stream zstream; /* pointer to decompression structure (below) */ - png_bytep zbuf; /* buffer for zlib */ - png_size_t zbuf_size; /* size of zbuf */ - int zlib_level; /* holds zlib compression level */ - int zlib_method; /* holds zlib compression method */ - int zlib_window_bits; /* holds zlib compression window bits */ - int zlib_mem_level; /* holds zlib compression memory level */ - int zlib_strategy; /* holds zlib compression strategy */ - - png_uint_32 width; /* width of image in pixels */ - png_uint_32 height; /* height of image in pixels */ - png_uint_32 num_rows; /* number of rows in current pass */ - png_uint_32 usr_width; /* width of row at start of write */ - png_uint_32 rowbytes; /* size of row in bytes */ - png_uint_32 irowbytes; /* size of current interlaced row in bytes */ - png_uint_32 iwidth; /* width of current interlaced row in pixels */ - png_uint_32 row_number; /* current row in interlace pass */ - png_bytep prev_row; /* buffer to save previous (unfiltered) row */ - png_bytep row_buf; /* buffer to save current (unfiltered) row */ -#ifndef PNG_NO_WRITE_FILTER - png_bytep sub_row; /* buffer to save "sub" row when filtering */ - png_bytep up_row; /* buffer to save "up" row when filtering */ - png_bytep avg_row; /* buffer to save "avg" row when filtering */ - png_bytep paeth_row; /* buffer to save "Paeth" row when filtering */ -#endif - png_row_info row_info; /* used for transformation routines */ - - png_uint_32 idat_size; /* current IDAT size for read */ - png_uint_32 crc; /* current chunk CRC value */ - png_colorp palette; /* palette from the input file */ - png_uint_16 num_palette; /* number of color entries in palette */ - png_uint_16 num_trans; /* number of transparency values */ - png_byte chunk_name[5]; /* null-terminated name of current chunk */ - png_byte compression; /* file compression type (always 0) */ - png_byte filter; /* file filter type (always 0) */ - png_byte interlaced; /* PNG_INTERLACE_NONE, PNG_INTERLACE_ADAM7 */ - png_byte pass; /* current interlace pass (0 - 6) */ - png_byte do_filter; /* row filter flags (see PNG_FILTER_ below ) */ - png_byte color_type; /* color type of file */ - png_byte bit_depth; /* bit depth of file */ - png_byte usr_bit_depth; /* bit depth of users row */ - png_byte pixel_depth; /* number of bits per pixel */ - png_byte channels; /* number of channels in file */ - png_byte usr_channels; /* channels at start of write */ - png_byte sig_bytes; /* magic bytes read/written from start of file */ - -#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) -#ifdef PNG_LEGACY_SUPPORTED - png_byte filler; /* filler byte for pixel expansion */ -#else - png_uint_16 filler; /* filler bytes for pixel expansion */ -#endif -#endif - -#if defined(PNG_bKGD_SUPPORTED) - png_byte background_gamma_type; -# ifdef PNG_FLOATING_POINT_SUPPORTED - float background_gamma; -# endif - png_color_16 background; /* background color in screen gamma space */ -#if defined(PNG_READ_GAMMA_SUPPORTED) - png_color_16 background_1; /* background normalized to gamma 1.0 */ -#endif -#endif /* PNG_bKGD_SUPPORTED */ - -#if defined(PNG_WRITE_FLUSH_SUPPORTED) - png_flush_ptr output_flush_fn;/* Function for flushing output */ - png_uint_32 flush_dist; /* how many rows apart to flush, 0 - no flush */ - png_uint_32 flush_rows; /* number of rows written since last flush */ -#endif - -#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) - int gamma_shift; /* number of "insignificant" bits 16-bit gamma */ -#ifdef PNG_FLOATING_POINT_SUPPORTED - float gamma; /* file gamma value */ - float screen_gamma; /* screen gamma value (display_exponent) */ -#endif -#endif - -#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) - png_bytep gamma_table; /* gamma table for 8-bit depth files */ - png_bytep gamma_from_1; /* converts from 1.0 to screen */ - png_bytep gamma_to_1; /* converts from file to 1.0 */ - png_uint_16pp gamma_16_table; /* gamma table for 16-bit depth files */ - png_uint_16pp gamma_16_from_1; /* converts from 1.0 to screen */ - png_uint_16pp gamma_16_to_1; /* converts from file to 1.0 */ -#endif - -#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_sBIT_SUPPORTED) - png_color_8 sig_bit; /* significant bits in each available channel */ -#endif - -#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) - png_color_8 shift; /* shift for significant bit tranformation */ -#endif - -#if defined(PNG_tRNS_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) \ - || defined(PNG_READ_EXPAND_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) - png_bytep trans; /* transparency values for paletted files */ - png_color_16 trans_values; /* transparency values for non-paletted files */ -#endif - - png_read_status_ptr read_row_fn; /* called after each row is decoded */ - png_write_status_ptr write_row_fn; /* called after each row is encoded */ -#ifdef PNG_PROGRESSIVE_READ_SUPPORTED - png_progressive_info_ptr info_fn; /* called after header data fully read */ - png_progressive_row_ptr row_fn; /* called after each prog. row is decoded */ - png_progressive_end_ptr end_fn; /* called after image is complete */ - png_bytep save_buffer_ptr; /* current location in save_buffer */ - png_bytep save_buffer; /* buffer for previously read data */ - png_bytep current_buffer_ptr; /* current location in current_buffer */ - png_bytep current_buffer; /* buffer for recently used data */ - png_uint_32 push_length; /* size of current input chunk */ - png_uint_32 skip_length; /* bytes to skip in input data */ - png_size_t save_buffer_size; /* amount of data now in save_buffer */ - png_size_t save_buffer_max; /* total size of save_buffer */ - png_size_t buffer_size; /* total amount of available input data */ - png_size_t current_buffer_size; /* amount of data now in current_buffer */ - int process_mode; /* what push library is currently doing */ - int cur_palette; /* current push library palette index */ - -# if defined(PNG_TEXT_SUPPORTED) - png_size_t current_text_size; /* current size of text input data */ - png_size_t current_text_left; /* how much text left to read in input */ - png_charp current_text; /* current text chunk buffer */ - png_charp current_text_ptr; /* current location in current_text */ -# endif /* PNG_TEXT_SUPPORTED */ -#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ - -#if defined(__TURBOC__) && !defined(_Windows) && !defined(__FLAT__) -/* for the Borland special 64K segment handler */ - png_bytepp offset_table_ptr; - png_bytep offset_table; - png_uint_16 offset_table_number; - png_uint_16 offset_table_count; - png_uint_16 offset_table_count_free; -#endif - -#if defined(PNG_READ_DITHER_SUPPORTED) - png_bytep palette_lookup; /* lookup table for dithering */ - png_bytep dither_index; /* index translation for palette files */ -#endif - -#if defined(PNG_READ_DITHER_SUPPORTED) || defined(PNG_hIST_SUPPORTED) - png_uint_16p hist; /* histogram */ -#endif - -#if defined(PNG_WRITE_WEIGHTED_FILTER_SUPPORTED) - png_byte heuristic_method; /* heuristic for row filter selection */ - png_byte num_prev_filters; /* number of weights for previous rows */ - png_bytep prev_filters; /* filter type(s) of previous row(s) */ - png_uint_16p filter_weights; /* weight(s) for previous line(s) */ - png_uint_16p inv_filter_weights; /* 1/weight(s) for previous line(s) */ - png_uint_16p filter_costs; /* relative filter calculation cost */ - png_uint_16p inv_filter_costs; /* 1/relative filter calculation cost */ -#endif - -#if defined(PNG_TIME_RFC1123_SUPPORTED) - png_charp time_buffer; /* String to hold RFC 1123 time text */ -#endif - -/* New members added in libpng-1.0.6 */ - -#ifdef PNG_FREE_ME_SUPPORTED - png_uint_32 free_me; /* flags items libpng is responsible for freeing */ -#endif - -#if defined(PNG_USER_CHUNKS_SUPPORTED) - png_voidp user_chunk_ptr; - png_user_chunk_ptr read_user_chunk_fn; /* user read chunk handler */ -#endif - -#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) - int num_chunk_list; - png_bytep chunk_list; -#endif - -/* New members added in libpng-1.0.3 */ -#if defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) - png_byte rgb_to_gray_status; - /* These were changed from png_byte in libpng-1.0.6 */ - png_uint_16 rgb_to_gray_red_coeff; - png_uint_16 rgb_to_gray_green_coeff; - png_uint_16 rgb_to_gray_blue_coeff; -#endif - -/* New member added in libpng-1.0.4 (renamed in 1.0.9) */ -#if defined(PNG_MNG_FEATURES_SUPPORTED) || \ - defined(PNG_READ_EMPTY_PLTE_SUPPORTED) || \ - defined(PNG_WRITE_EMPTY_PLTE_SUPPORTED) -/* changed from png_byte to png_uint_32 at version 1.2.0 */ -#ifdef PNG_1_0_X - png_byte mng_features_permitted; -#else - png_uint_32 mng_features_permitted; -#endif /* PNG_1_0_X */ -#endif - -/* New member added in libpng-1.0.7 */ -#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) - png_fixed_point int_gamma; -#endif - -/* New member added in libpng-1.0.9, ifdef'ed out in 1.0.12, enabled in 1.2.0 */ -#if defined(PNG_MNG_FEATURES_SUPPORTED) - png_byte filter_type; -#endif - -#if defined(PNG_1_0_X) -/* New member added in libpng-1.0.10, ifdef'ed out in 1.2.0 */ - png_uint_32 row_buf_size; -#endif - -/* New members added in libpng-1.2.0 */ -#if defined(PNG_ASSEMBLER_CODE_SUPPORTED) -# if !defined(PNG_1_0_X) -# if defined(PNG_MMX_CODE_SUPPORTED) - png_byte mmx_bitdepth_threshold; - png_uint_32 mmx_rowbytes_threshold; -# endif - png_uint_32 asm_flags; -# endif -#endif - -/* New members added in libpng-1.0.2 but first enabled by default in 1.2.0 */ -#ifdef PNG_USER_MEM_SUPPORTED - png_voidp mem_ptr; /* user supplied struct for mem functions */ - png_malloc_ptr malloc_fn; /* function for allocating memory */ - png_free_ptr free_fn; /* function for freeing memory */ -#endif - -/* New member added in libpng-1.0.13 and 1.2.0 */ - png_bytep big_row_buf; /* buffer to save current (unfiltered) row */ - -#if defined(PNG_READ_DITHER_SUPPORTED) -/* The following three members were added at version 1.0.14 and 1.2.4 */ - png_bytep dither_sort; /* working sort array */ - png_bytep index_to_palette; /* where the original index currently is */ - /* in the palette */ - png_bytep palette_to_index; /* which original index points to this */ - /* palette color */ -#endif - -/* New members added in libpng-1.0.16 and 1.2.6 */ - png_byte compression_type; - -#ifdef PNG_SET_USER_LIMITS_SUPPORTED - png_uint_32 user_width_max; - png_uint_32 user_height_max; -#endif - -/* New member added in libpng-1.0.25 and 1.2.17 */ -#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) - /* storage for unknown chunk that the library doesn't recognize. */ - png_unknown_chunk unknown_chunk; -#endif - -/* New members added in libpng-1.2.26 */ - png_uint_32 old_big_row_buf_size, old_prev_row_size; - -/* New member added in libpng-1.2.30 */ - png_charp chunkdata; /* buffer for reading chunk data */ - -}; - - -/* This triggers a compiler error in png.c, if png.c and png.h - * do not agree upon the version number. - */ -typedef png_structp version_1_2_37; - -typedef png_struct FAR * FAR * png_structpp; - -/* Here are the function definitions most commonly used. This is not - * the place to find out how to use libpng. See libpng.txt for the - * full explanation, see example.c for the summary. This just provides - * a simple one line description of the use of each function. - */ - -/* Returns the version number of the library */ -extern PNG_EXPORT(png_uint_32,png_access_version_number) PNGARG((void)); - -/* Tell lib we have already handled the first <num_bytes> magic bytes. - * Handling more than 8 bytes from the beginning of the file is an error. - */ -extern PNG_EXPORT(void,png_set_sig_bytes) PNGARG((png_structp png_ptr, - int num_bytes)); - -/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a - * PNG file. Returns zero if the supplied bytes match the 8-byte PNG - * signature, and non-zero otherwise. Having num_to_check == 0 or - * start > 7 will always fail (ie return non-zero). - */ -extern PNG_EXPORT(int,png_sig_cmp) PNGARG((png_bytep sig, png_size_t start, - png_size_t num_to_check)); - -/* Simple signature checking function. This is the same as calling - * png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n). - */ -extern PNG_EXPORT(int,png_check_sig) PNGARG((png_bytep sig, int num)); - -/* Allocate and initialize png_ptr struct for reading, and any other memory. */ -extern PNG_EXPORT(png_structp,png_create_read_struct) - PNGARG((png_const_charp user_png_ver, png_voidp error_ptr, - png_error_ptr error_fn, png_error_ptr warn_fn)); - -/* Allocate and initialize png_ptr struct for writing, and any other memory */ -extern PNG_EXPORT(png_structp,png_create_write_struct) - PNGARG((png_const_charp user_png_ver, png_voidp error_ptr, - png_error_ptr error_fn, png_error_ptr warn_fn)); - -#ifdef PNG_WRITE_SUPPORTED -extern PNG_EXPORT(png_uint_32,png_get_compression_buffer_size) - PNGARG((png_structp png_ptr)); -#endif - -#ifdef PNG_WRITE_SUPPORTED -extern PNG_EXPORT(void,png_set_compression_buffer_size) - PNGARG((png_structp png_ptr, png_uint_32 size)); -#endif - -/* Reset the compression stream */ -extern PNG_EXPORT(int,png_reset_zstream) PNGARG((png_structp png_ptr)); - -/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ -#ifdef PNG_USER_MEM_SUPPORTED -extern PNG_EXPORT(png_structp,png_create_read_struct_2) - PNGARG((png_const_charp user_png_ver, png_voidp error_ptr, - png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr, - png_malloc_ptr malloc_fn, png_free_ptr free_fn)); -extern PNG_EXPORT(png_structp,png_create_write_struct_2) - PNGARG((png_const_charp user_png_ver, png_voidp error_ptr, - png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr, - png_malloc_ptr malloc_fn, png_free_ptr free_fn)); -#endif - -/* Write a PNG chunk - size, type, (optional) data, CRC. */ -extern PNG_EXPORT(void,png_write_chunk) PNGARG((png_structp png_ptr, - png_bytep chunk_name, png_bytep data, png_size_t length)); - -/* Write the start of a PNG chunk - length and chunk name. */ -extern PNG_EXPORT(void,png_write_chunk_start) PNGARG((png_structp png_ptr, - png_bytep chunk_name, png_uint_32 length)); - -/* Write the data of a PNG chunk started with png_write_chunk_start(). */ -extern PNG_EXPORT(void,png_write_chunk_data) PNGARG((png_structp png_ptr, - png_bytep data, png_size_t length)); - -/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ -extern PNG_EXPORT(void,png_write_chunk_end) PNGARG((png_structp png_ptr)); - -/* Allocate and initialize the info structure */ -extern PNG_EXPORT(png_infop,png_create_info_struct) - PNGARG((png_structp png_ptr)); - -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -/* Initialize the info structure (old interface - DEPRECATED) */ -extern PNG_EXPORT(void,png_info_init) PNGARG((png_infop info_ptr)); -#undef png_info_init -#define png_info_init(info_ptr) png_info_init_3(&info_ptr,\ - png_sizeof(png_info)); -#endif - -extern PNG_EXPORT(void,png_info_init_3) PNGARG((png_infopp info_ptr, - png_size_t png_info_struct_size)); - -/* Writes all the PNG information before the image. */ -extern PNG_EXPORT(void,png_write_info_before_PLTE) PNGARG((png_structp png_ptr, - png_infop info_ptr)); -extern PNG_EXPORT(void,png_write_info) PNGARG((png_structp png_ptr, - png_infop info_ptr)); - -#ifndef PNG_NO_SEQUENTIAL_READ_SUPPORTED -/* read the information before the actual image data. */ -extern PNG_EXPORT(void,png_read_info) PNGARG((png_structp png_ptr, - png_infop info_ptr)); -#endif - -#if defined(PNG_TIME_RFC1123_SUPPORTED) -extern PNG_EXPORT(png_charp,png_convert_to_rfc1123) - PNGARG((png_structp png_ptr, png_timep ptime)); -#endif - -#if !defined(_WIN32_WCE) -/* "time.h" functions are not supported on WindowsCE */ -#if defined(PNG_WRITE_tIME_SUPPORTED) -/* convert from a struct tm to png_time */ -extern PNG_EXPORT(void,png_convert_from_struct_tm) PNGARG((png_timep ptime, - struct tm FAR * ttime)); - -/* convert from time_t to png_time. Uses gmtime() */ -extern PNG_EXPORT(void,png_convert_from_time_t) PNGARG((png_timep ptime, - time_t ttime)); -#endif /* PNG_WRITE_tIME_SUPPORTED */ -#endif /* _WIN32_WCE */ - -#if defined(PNG_READ_EXPAND_SUPPORTED) -/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ -extern PNG_EXPORT(void,png_set_expand) PNGARG((png_structp png_ptr)); -#if !defined(PNG_1_0_X) -extern PNG_EXPORT(void,png_set_expand_gray_1_2_4_to_8) PNGARG((png_structp - png_ptr)); -#endif -extern PNG_EXPORT(void,png_set_palette_to_rgb) PNGARG((png_structp png_ptr)); -extern PNG_EXPORT(void,png_set_tRNS_to_alpha) PNGARG((png_structp png_ptr)); -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -/* Deprecated */ -extern PNG_EXPORT(void,png_set_gray_1_2_4_to_8) PNGARG((png_structp png_ptr)); -#endif -#endif - -#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) -/* Use blue, green, red order for pixels. */ -extern PNG_EXPORT(void,png_set_bgr) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_GRAY_TO_RGB_SUPPORTED) -/* Expand the grayscale to 24-bit RGB if necessary. */ -extern PNG_EXPORT(void,png_set_gray_to_rgb) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) -/* Reduce RGB to grayscale. */ -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_rgb_to_gray) PNGARG((png_structp png_ptr, - int error_action, double red, double green )); -#endif -extern PNG_EXPORT(void,png_set_rgb_to_gray_fixed) PNGARG((png_structp png_ptr, - int error_action, png_fixed_point red, png_fixed_point green )); -extern PNG_EXPORT(png_byte,png_get_rgb_to_gray_status) PNGARG((png_structp - png_ptr)); -#endif - -extern PNG_EXPORT(void,png_build_grayscale_palette) PNGARG((int bit_depth, - png_colorp palette)); - -#if defined(PNG_READ_STRIP_ALPHA_SUPPORTED) -extern PNG_EXPORT(void,png_set_strip_alpha) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ - defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) -extern PNG_EXPORT(void,png_set_swap_alpha) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ - defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) -extern PNG_EXPORT(void,png_set_invert_alpha) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) -/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */ -extern PNG_EXPORT(void,png_set_filler) PNGARG((png_structp png_ptr, - png_uint_32 filler, int flags)); -/* The values of the PNG_FILLER_ defines should NOT be changed */ -#define PNG_FILLER_BEFORE 0 -#define PNG_FILLER_AFTER 1 -/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */ -#if !defined(PNG_1_0_X) -extern PNG_EXPORT(void,png_set_add_alpha) PNGARG((png_structp png_ptr, - png_uint_32 filler, int flags)); -#endif -#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */ - -#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) -/* Swap bytes in 16-bit depth files. */ -extern PNG_EXPORT(void,png_set_swap) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) -/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ -extern PNG_EXPORT(void,png_set_packing) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_PACKSWAP_SUPPORTED) || defined(PNG_WRITE_PACKSWAP_SUPPORTED) -/* Swap packing order of pixels in bytes. */ -extern PNG_EXPORT(void,png_set_packswap) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) -/* Converts files to legal bit depths. */ -extern PNG_EXPORT(void,png_set_shift) PNGARG((png_structp png_ptr, - png_color_8p true_bits)); -#endif - -#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ - defined(PNG_WRITE_INTERLACING_SUPPORTED) -/* Have the code handle the interlacing. Returns the number of passes. */ -extern PNG_EXPORT(int,png_set_interlace_handling) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) -/* Invert monochrome files */ -extern PNG_EXPORT(void,png_set_invert_mono) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_BACKGROUND_SUPPORTED) -/* Handle alpha and tRNS by replacing with a background color. */ -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_background) PNGARG((png_structp png_ptr, - png_color_16p background_color, int background_gamma_code, - int need_expand, double background_gamma)); -#endif -#define PNG_BACKGROUND_GAMMA_UNKNOWN 0 -#define PNG_BACKGROUND_GAMMA_SCREEN 1 -#define PNG_BACKGROUND_GAMMA_FILE 2 -#define PNG_BACKGROUND_GAMMA_UNIQUE 3 -#endif - -#if defined(PNG_READ_16_TO_8_SUPPORTED) -/* strip the second byte of information from a 16-bit depth file. */ -extern PNG_EXPORT(void,png_set_strip_16) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_DITHER_SUPPORTED) -/* Turn on dithering, and reduce the palette to the number of colors available. */ -extern PNG_EXPORT(void,png_set_dither) PNGARG((png_structp png_ptr, - png_colorp palette, int num_palette, int maximum_colors, - png_uint_16p histogram, int full_dither)); -#endif - -#if defined(PNG_READ_GAMMA_SUPPORTED) -/* Handle gamma correction. Screen_gamma=(display_exponent) */ -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_gamma) PNGARG((png_structp png_ptr, - double screen_gamma, double default_file_gamma)); -#endif -#endif - -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -#if defined(PNG_READ_EMPTY_PLTE_SUPPORTED) || \ - defined(PNG_WRITE_EMPTY_PLTE_SUPPORTED) -/* Permit or disallow empty PLTE (0: not permitted, 1: permitted) */ -/* Deprecated and will be removed. Use png_permit_mng_features() instead. */ -extern PNG_EXPORT(void,png_permit_empty_plte) PNGARG((png_structp png_ptr, - int empty_plte_permitted)); -#endif -#endif - -#if defined(PNG_WRITE_FLUSH_SUPPORTED) -/* Set how many lines between output flushes - 0 for no flushing */ -extern PNG_EXPORT(void,png_set_flush) PNGARG((png_structp png_ptr, int nrows)); -/* Flush the current PNG output buffer */ -extern PNG_EXPORT(void,png_write_flush) PNGARG((png_structp png_ptr)); -#endif - -/* optional update palette with requested transformations */ -extern PNG_EXPORT(void,png_start_read_image) PNGARG((png_structp png_ptr)); - -/* optional call to update the users info structure */ -extern PNG_EXPORT(void,png_read_update_info) PNGARG((png_structp png_ptr, - png_infop info_ptr)); - -#ifndef PNG_NO_SEQUENTIAL_READ_SUPPORTED -/* read one or more rows of image data. */ -extern PNG_EXPORT(void,png_read_rows) PNGARG((png_structp png_ptr, - png_bytepp row, png_bytepp display_row, png_uint_32 num_rows)); -#endif - -#ifndef PNG_NO_SEQUENTIAL_READ_SUPPORTED -/* read a row of data. */ -extern PNG_EXPORT(void,png_read_row) PNGARG((png_structp png_ptr, - png_bytep row, - png_bytep display_row)); -#endif - -#ifndef PNG_NO_SEQUENTIAL_READ_SUPPORTED -/* read the whole image into memory at once. */ -extern PNG_EXPORT(void,png_read_image) PNGARG((png_structp png_ptr, - png_bytepp image)); -#endif - -/* write a row of image data */ -extern PNG_EXPORT(void,png_write_row) PNGARG((png_structp png_ptr, - png_bytep row)); - -/* write a few rows of image data */ -extern PNG_EXPORT(void,png_write_rows) PNGARG((png_structp png_ptr, - png_bytepp row, png_uint_32 num_rows)); - -/* write the image data */ -extern PNG_EXPORT(void,png_write_image) PNGARG((png_structp png_ptr, - png_bytepp image)); - -/* writes the end of the PNG file. */ -extern PNG_EXPORT(void,png_write_end) PNGARG((png_structp png_ptr, - png_infop info_ptr)); - -#ifndef PNG_NO_SEQUENTIAL_READ_SUPPORTED -/* read the end of the PNG file. */ -extern PNG_EXPORT(void,png_read_end) PNGARG((png_structp png_ptr, - png_infop info_ptr)); -#endif - -/* free any memory associated with the png_info_struct */ -extern PNG_EXPORT(void,png_destroy_info_struct) PNGARG((png_structp png_ptr, - png_infopp info_ptr_ptr)); - -/* free any memory associated with the png_struct and the png_info_structs */ -extern PNG_EXPORT(void,png_destroy_read_struct) PNGARG((png_structpp - png_ptr_ptr, png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); - -/* free all memory used by the read (old method - NOT DLL EXPORTED) */ -/* Debian note: exporting as it is required by legacy applications */ -extern PNG_EXPORT(void,png_read_destroy) PNGARG((png_structp png_ptr, png_infop info_ptr, - png_infop end_info_ptr)); - -/* free any memory associated with the png_struct and the png_info_structs */ -extern PNG_EXPORT(void,png_destroy_write_struct) - PNGARG((png_structpp png_ptr_ptr, png_infopp info_ptr_ptr)); - -/* free any memory used in png_ptr struct (old method - NOT DLL EXPORTED) */ -/* Debian note: exporting as it is required by legacy applications */ -extern PNG_EXPORT(void,png_write_destroy) PNGARG((png_structp png_ptr)); - -/* set the libpng method of handling chunk CRC errors */ -extern PNG_EXPORT(void,png_set_crc_action) PNGARG((png_structp png_ptr, - int crit_action, int ancil_action)); - -/* Values for png_set_crc_action() to say how to handle CRC errors in - * ancillary and critical chunks, and whether to use the data contained - * therein. Note that it is impossible to "discard" data in a critical - * chunk. For versions prior to 0.90, the action was always error/quit, - * whereas in version 0.90 and later, the action for CRC errors in ancillary - * chunks is warn/discard. These values should NOT be changed. - * - * value action:critical action:ancillary - */ -#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ -#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ -#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ -#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ -#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ -#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ - -/* These functions give the user control over the scan-line filtering in - * libpng and the compression methods used by zlib. These functions are - * mainly useful for testing, as the defaults should work with most users. - * Those users who are tight on memory or want faster performance at the - * expense of compression can modify them. See the compression library - * header file (zlib.h) for an explination of the compression functions. - */ - -/* set the filtering method(s) used by libpng. Currently, the only valid - * value for "method" is 0. - */ -extern PNG_EXPORT(void,png_set_filter) PNGARG((png_structp png_ptr, int method, - int filters)); - -/* Flags for png_set_filter() to say which filters to use. The flags - * are chosen so that they don't conflict with real filter types - * below, in case they are supplied instead of the #defined constants. - * These values should NOT be changed. - */ -#define PNG_NO_FILTERS 0x00 -#define PNG_FILTER_NONE 0x08 -#define PNG_FILTER_SUB 0x10 -#define PNG_FILTER_UP 0x20 -#define PNG_FILTER_AVG 0x40 -#define PNG_FILTER_PAETH 0x80 -#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \ - PNG_FILTER_AVG | PNG_FILTER_PAETH) - -/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. - * These defines should NOT be changed. - */ -#define PNG_FILTER_VALUE_NONE 0 -#define PNG_FILTER_VALUE_SUB 1 -#define PNG_FILTER_VALUE_UP 2 -#define PNG_FILTER_VALUE_AVG 3 -#define PNG_FILTER_VALUE_PAETH 4 -#define PNG_FILTER_VALUE_LAST 5 - -#if defined(PNG_WRITE_WEIGHTED_FILTER_SUPPORTED) /* EXPERIMENTAL */ -/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_ - * defines, either the default (minimum-sum-of-absolute-differences), or - * the experimental method (weighted-minimum-sum-of-absolute-differences). - * - * Weights are factors >= 1.0, indicating how important it is to keep the - * filter type consistent between rows. Larger numbers mean the current - * filter is that many times as likely to be the same as the "num_weights" - * previous filters. This is cumulative for each previous row with a weight. - * There needs to be "num_weights" values in "filter_weights", or it can be - * NULL if the weights aren't being specified. Weights have no influence on - * the selection of the first row filter. Well chosen weights can (in theory) - * improve the compression for a given image. - * - * Costs are factors >= 1.0 indicating the relative decoding costs of a - * filter type. Higher costs indicate more decoding expense, and are - * therefore less likely to be selected over a filter with lower computational - * costs. There needs to be a value in "filter_costs" for each valid filter - * type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't - * setting the costs. Costs try to improve the speed of decompression without - * unduly increasing the compressed image size. - * - * A negative weight or cost indicates the default value is to be used, and - * values in the range [0.0, 1.0) indicate the value is to remain unchanged. - * The default values for both weights and costs are currently 1.0, but may - * change if good general weighting/cost heuristics can be found. If both - * the weights and costs are set to 1.0, this degenerates the WEIGHTED method - * to the UNWEIGHTED method, but with added encoding time/computation. - */ -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_filter_heuristics) PNGARG((png_structp png_ptr, - int heuristic_method, int num_weights, png_doublep filter_weights, - png_doublep filter_costs)); -#endif -#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */ - -/* Heuristic used for row filter selection. These defines should NOT be - * changed. - */ -#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ -#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ -#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ -#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ - -/* Set the library compression level. Currently, valid values range from - * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 - * (0 - no compression, 9 - "maximal" compression). Note that tests have - * shown that zlib compression levels 3-6 usually perform as well as level 9 - * for PNG images, and do considerably fewer caclulations. In the future, - * these values may not correspond directly to the zlib compression levels. - */ -extern PNG_EXPORT(void,png_set_compression_level) PNGARG((png_structp png_ptr, - int level)); - -extern PNG_EXPORT(void,png_set_compression_mem_level) - PNGARG((png_structp png_ptr, int mem_level)); - -extern PNG_EXPORT(void,png_set_compression_strategy) - PNGARG((png_structp png_ptr, int strategy)); - -extern PNG_EXPORT(void,png_set_compression_window_bits) - PNGARG((png_structp png_ptr, int window_bits)); - -extern PNG_EXPORT(void,png_set_compression_method) PNGARG((png_structp png_ptr, - int method)); - -/* These next functions are called for input/output, memory, and error - * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, - * and call standard C I/O routines such as fread(), fwrite(), and - * fprintf(). These functions can be made to use other I/O routines - * at run time for those applications that need to handle I/O in a - * different manner by calling png_set_???_fn(). See libpng.txt for - * more information. - */ - -#if !defined(PNG_NO_STDIO) -/* Initialize the input/output for the PNG file to the default functions. */ -extern PNG_EXPORT(void,png_init_io) PNGARG((png_structp png_ptr, png_FILE_p fp)); -#endif - -/* Replace the (error and abort), and warning functions with user - * supplied functions. If no messages are to be printed you must still - * write and use replacement functions. The replacement error_fn should - * still do a longjmp to the last setjmp location if you are using this - * method of error handling. If error_fn or warning_fn is NULL, the - * default function will be used. - */ - -extern PNG_EXPORT(void,png_set_error_fn) PNGARG((png_structp png_ptr, - png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn)); - -/* Return the user pointer associated with the error functions */ -extern PNG_EXPORT(png_voidp,png_get_error_ptr) PNGARG((png_structp png_ptr)); - -/* Replace the default data output functions with a user supplied one(s). - * If buffered output is not used, then output_flush_fn can be set to NULL. - * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time - * output_flush_fn will be ignored (and thus can be NULL). - * It is probably a mistake to use NULL for output_flush_fn if - * write_data_fn is not also NULL unless you have built libpng with - * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's - * default flush function, which uses the standard *FILE structure, will - * be used. - */ -extern PNG_EXPORT(void,png_set_write_fn) PNGARG((png_structp png_ptr, - png_voidp io_ptr, png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); - -/* Replace the default data input function with a user supplied one. */ -extern PNG_EXPORT(void,png_set_read_fn) PNGARG((png_structp png_ptr, - png_voidp io_ptr, png_rw_ptr read_data_fn)); - -/* Return the user pointer associated with the I/O functions */ -extern PNG_EXPORT(png_voidp,png_get_io_ptr) PNGARG((png_structp png_ptr)); - -extern PNG_EXPORT(void,png_set_read_status_fn) PNGARG((png_structp png_ptr, - png_read_status_ptr read_row_fn)); - -extern PNG_EXPORT(void,png_set_write_status_fn) PNGARG((png_structp png_ptr, - png_write_status_ptr write_row_fn)); - -#ifdef PNG_USER_MEM_SUPPORTED -/* Replace the default memory allocation functions with user supplied one(s). */ -extern PNG_EXPORT(void,png_set_mem_fn) PNGARG((png_structp png_ptr, - png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn)); -/* Return the user pointer associated with the memory functions */ -extern PNG_EXPORT(png_voidp,png_get_mem_ptr) PNGARG((png_structp png_ptr)); -#endif - -#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_LEGACY_SUPPORTED) -extern PNG_EXPORT(void,png_set_read_user_transform_fn) PNGARG((png_structp - png_ptr, png_user_transform_ptr read_user_transform_fn)); -#endif - -#if defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_LEGACY_SUPPORTED) -extern PNG_EXPORT(void,png_set_write_user_transform_fn) PNGARG((png_structp - png_ptr, png_user_transform_ptr write_user_transform_fn)); -#endif - -#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_LEGACY_SUPPORTED) -extern PNG_EXPORT(void,png_set_user_transform_info) PNGARG((png_structp - png_ptr, png_voidp user_transform_ptr, int user_transform_depth, - int user_transform_channels)); -/* Return the user pointer associated with the user transform functions */ -extern PNG_EXPORT(png_voidp,png_get_user_transform_ptr) - PNGARG((png_structp png_ptr)); -#endif - -#ifdef PNG_USER_CHUNKS_SUPPORTED -extern PNG_EXPORT(void,png_set_read_user_chunk_fn) PNGARG((png_structp png_ptr, - png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); -extern PNG_EXPORT(png_voidp,png_get_user_chunk_ptr) PNGARG((png_structp - png_ptr)); -#endif - -#ifdef PNG_PROGRESSIVE_READ_SUPPORTED -/* Sets the function callbacks for the push reader, and a pointer to a - * user-defined structure available to the callback functions. - */ -extern PNG_EXPORT(void,png_set_progressive_read_fn) PNGARG((png_structp png_ptr, - png_voidp progressive_ptr, - png_progressive_info_ptr info_fn, png_progressive_row_ptr row_fn, - png_progressive_end_ptr end_fn)); - -/* returns the user pointer associated with the push read functions */ -extern PNG_EXPORT(png_voidp,png_get_progressive_ptr) - PNGARG((png_structp png_ptr)); - -/* function to be called when data becomes available */ -extern PNG_EXPORT(void,png_process_data) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_bytep buffer, png_size_t buffer_size)); - -/* function that combines rows. Not very much different than the - * png_combine_row() call. Is this even used????? - */ -extern PNG_EXPORT(void,png_progressive_combine_row) PNGARG((png_structp png_ptr, - png_bytep old_row, png_bytep new_row)); -#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ - -extern PNG_EXPORT(png_voidp,png_malloc) PNGARG((png_structp png_ptr, - png_uint_32 size)); - -#if defined(PNG_1_0_X) -# define png_malloc_warn png_malloc -#else -/* Added at libpng version 1.2.4 */ -extern PNG_EXPORT(png_voidp,png_malloc_warn) PNGARG((png_structp png_ptr, - png_uint_32 size)); -#endif - -/* frees a pointer allocated by png_malloc() */ -extern PNG_EXPORT(void,png_free) PNGARG((png_structp png_ptr, png_voidp ptr)); - -#if defined(PNG_1_0_X) -/* Function to allocate memory for zlib. */ -extern PNG_EXPORT(voidpf,png_zalloc) PNGARG((voidpf png_ptr, uInt items, - uInt size)); - -/* Function to free memory for zlib */ -extern PNG_EXPORT(void,png_zfree) PNGARG((voidpf png_ptr, voidpf ptr)); -#endif - -/* Free data that was allocated internally */ -extern PNG_EXPORT(void,png_free_data) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 free_me, int num)); -#ifdef PNG_FREE_ME_SUPPORTED -/* Reassign responsibility for freeing existing data, whether allocated - * by libpng or by the application */ -extern PNG_EXPORT(void,png_data_freer) PNGARG((png_structp png_ptr, - png_infop info_ptr, int freer, png_uint_32 mask)); -#endif -/* assignments for png_data_freer */ -#define PNG_DESTROY_WILL_FREE_DATA 1 -#define PNG_SET_WILL_FREE_DATA 1 -#define PNG_USER_WILL_FREE_DATA 2 -/* Flags for png_ptr->free_me and info_ptr->free_me */ -#define PNG_FREE_HIST 0x0008 -#define PNG_FREE_ICCP 0x0010 -#define PNG_FREE_SPLT 0x0020 -#define PNG_FREE_ROWS 0x0040 -#define PNG_FREE_PCAL 0x0080 -#define PNG_FREE_SCAL 0x0100 -#define PNG_FREE_UNKN 0x0200 -#define PNG_FREE_LIST 0x0400 -#define PNG_FREE_PLTE 0x1000 -#define PNG_FREE_TRNS 0x2000 -#define PNG_FREE_TEXT 0x4000 -#define PNG_FREE_ALL 0x7fff -#define PNG_FREE_MUL 0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ - -#ifdef PNG_USER_MEM_SUPPORTED -extern PNG_EXPORT(png_voidp,png_malloc_default) PNGARG((png_structp png_ptr, - png_uint_32 size)); -extern PNG_EXPORT(void,png_free_default) PNGARG((png_structp png_ptr, - png_voidp ptr)); -#endif - -extern PNG_EXPORT(png_voidp,png_memcpy_check) PNGARG((png_structp png_ptr, - png_voidp s1, png_voidp s2, png_uint_32 size)); - -extern PNG_EXPORT(png_voidp,png_memset_check) PNGARG((png_structp png_ptr, - png_voidp s1, int value, png_uint_32 size)); - -#if defined(USE_FAR_KEYWORD) /* memory model conversion function */ -extern void *png_far_to_near PNGARG((png_structp png_ptr,png_voidp ptr, - int check)); -#endif /* USE_FAR_KEYWORD */ - -#ifndef PNG_NO_ERROR_TEXT -/* Fatal error in PNG image of libpng - can't continue */ -extern PNG_EXPORT(void,png_error) PNGARG((png_structp png_ptr, - png_const_charp error_message)); - -/* The same, but the chunk name is prepended to the error string. */ -extern PNG_EXPORT(void,png_chunk_error) PNGARG((png_structp png_ptr, - png_const_charp error_message)); -#else -/* Fatal error in PNG image of libpng - can't continue */ -extern PNG_EXPORT(void,png_err) PNGARG((png_structp png_ptr)); -#endif - -#ifndef PNG_NO_WARNINGS -/* Non-fatal error in libpng. Can continue, but may have a problem. */ -extern PNG_EXPORT(void,png_warning) PNGARG((png_structp png_ptr, - png_const_charp warning_message)); - -#ifdef PNG_READ_SUPPORTED -/* Non-fatal error in libpng, chunk name is prepended to message. */ -extern PNG_EXPORT(void,png_chunk_warning) PNGARG((png_structp png_ptr, - png_const_charp warning_message)); -#endif /* PNG_READ_SUPPORTED */ -#endif /* PNG_NO_WARNINGS */ - -/* The png_set_<chunk> functions are for storing values in the png_info_struct. - * Similarly, the png_get_<chunk> calls are used to read values from the - * png_info_struct, either storing the parameters in the passed variables, or - * setting pointers into the png_info_struct where the data is stored. The - * png_get_<chunk> functions return a non-zero value if the data was available - * in info_ptr, or return zero and do not change any of the parameters if the - * data was not available. - * - * These functions should be used instead of directly accessing png_info - * to avoid problems with future changes in the size and internal layout of - * png_info_struct. - */ -/* Returns "flag" if chunk data is valid in info_ptr. */ -extern PNG_EXPORT(png_uint_32,png_get_valid) PNGARG((png_structp png_ptr, -png_infop info_ptr, png_uint_32 flag)); - -/* Returns number of bytes needed to hold a transformed row. */ -extern PNG_EXPORT(png_uint_32,png_get_rowbytes) PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -#if defined(PNG_INFO_IMAGE_SUPPORTED) -/* Returns row_pointers, which is an array of pointers to scanlines that was -returned from png_read_png(). */ -extern PNG_EXPORT(png_bytepp,png_get_rows) PNGARG((png_structp png_ptr, -png_infop info_ptr)); -/* Set row_pointers, which is an array of pointers to scanlines for use -by png_write_png(). */ -extern PNG_EXPORT(void,png_set_rows) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_bytepp row_pointers)); -#endif - -/* Returns number of color channels in image. */ -extern PNG_EXPORT(png_byte,png_get_channels) PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -#ifdef PNG_EASY_ACCESS_SUPPORTED -/* Returns image width in pixels. */ -extern PNG_EXPORT(png_uint_32, png_get_image_width) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns image height in pixels. */ -extern PNG_EXPORT(png_uint_32, png_get_image_height) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns image bit_depth. */ -extern PNG_EXPORT(png_byte, png_get_bit_depth) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns image color_type. */ -extern PNG_EXPORT(png_byte, png_get_color_type) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns image filter_type. */ -extern PNG_EXPORT(png_byte, png_get_filter_type) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns image interlace_type. */ -extern PNG_EXPORT(png_byte, png_get_interlace_type) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns image compression_type. */ -extern PNG_EXPORT(png_byte, png_get_compression_type) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns image resolution in pixels per meter, from pHYs chunk data. */ -extern PNG_EXPORT(png_uint_32, png_get_pixels_per_meter) PNGARG((png_structp -png_ptr, png_infop info_ptr)); -extern PNG_EXPORT(png_uint_32, png_get_x_pixels_per_meter) PNGARG((png_structp -png_ptr, png_infop info_ptr)); -extern PNG_EXPORT(png_uint_32, png_get_y_pixels_per_meter) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -/* Returns pixel aspect ratio, computed from pHYs chunk data. */ -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(float, png_get_pixel_aspect_ratio) PNGARG((png_structp -png_ptr, png_infop info_ptr)); -#endif - -/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ -extern PNG_EXPORT(png_int_32, png_get_x_offset_pixels) PNGARG((png_structp -png_ptr, png_infop info_ptr)); -extern PNG_EXPORT(png_int_32, png_get_y_offset_pixels) PNGARG((png_structp -png_ptr, png_infop info_ptr)); -extern PNG_EXPORT(png_int_32, png_get_x_offset_microns) PNGARG((png_structp -png_ptr, png_infop info_ptr)); -extern PNG_EXPORT(png_int_32, png_get_y_offset_microns) PNGARG((png_structp -png_ptr, png_infop info_ptr)); - -#endif /* PNG_EASY_ACCESS_SUPPORTED */ - -/* Returns pointer to signature string read from PNG header */ -extern PNG_EXPORT(png_bytep,png_get_signature) PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -#if defined(PNG_bKGD_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_bKGD) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_color_16p *background)); -#endif - -#if defined(PNG_bKGD_SUPPORTED) -extern PNG_EXPORT(void,png_set_bKGD) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_color_16p background)); -#endif - -#if defined(PNG_cHRM_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(png_uint_32,png_get_cHRM) PNGARG((png_structp png_ptr, - png_infop info_ptr, double *white_x, double *white_y, double *red_x, - double *red_y, double *green_x, double *green_y, double *blue_x, - double *blue_y)); -#endif -#ifdef PNG_FIXED_POINT_SUPPORTED -extern PNG_EXPORT(png_uint_32,png_get_cHRM_fixed) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_fixed_point *int_white_x, png_fixed_point - *int_white_y, png_fixed_point *int_red_x, png_fixed_point *int_red_y, - png_fixed_point *int_green_x, png_fixed_point *int_green_y, png_fixed_point - *int_blue_x, png_fixed_point *int_blue_y)); -#endif -#endif - -#if defined(PNG_cHRM_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_cHRM) PNGARG((png_structp png_ptr, - png_infop info_ptr, double white_x, double white_y, double red_x, - double red_y, double green_x, double green_y, double blue_x, double blue_y)); -#endif -#ifdef PNG_FIXED_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_cHRM_fixed) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_fixed_point int_white_x, png_fixed_point int_white_y, - png_fixed_point int_red_x, png_fixed_point int_red_y, png_fixed_point - int_green_x, png_fixed_point int_green_y, png_fixed_point int_blue_x, - png_fixed_point int_blue_y)); -#endif -#endif - -#if defined(PNG_gAMA_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(png_uint_32,png_get_gAMA) PNGARG((png_structp png_ptr, - png_infop info_ptr, double *file_gamma)); -#endif -extern PNG_EXPORT(png_uint_32,png_get_gAMA_fixed) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_fixed_point *int_file_gamma)); -#endif - -#if defined(PNG_gAMA_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_gAMA) PNGARG((png_structp png_ptr, - png_infop info_ptr, double file_gamma)); -#endif -extern PNG_EXPORT(void,png_set_gAMA_fixed) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_fixed_point int_file_gamma)); -#endif - -#if defined(PNG_hIST_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_hIST) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_16p *hist)); -#endif - -#if defined(PNG_hIST_SUPPORTED) -extern PNG_EXPORT(void,png_set_hIST) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_16p hist)); -#endif - -extern PNG_EXPORT(png_uint_32,png_get_IHDR) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 *width, png_uint_32 *height, - int *bit_depth, int *color_type, int *interlace_method, - int *compression_method, int *filter_method)); - -extern PNG_EXPORT(void,png_set_IHDR) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth, - int color_type, int interlace_method, int compression_method, - int filter_method)); - -#if defined(PNG_oFFs_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_oFFs) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_int_32 *offset_x, png_int_32 *offset_y, - int *unit_type)); -#endif - -#if defined(PNG_oFFs_SUPPORTED) -extern PNG_EXPORT(void,png_set_oFFs) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_int_32 offset_x, png_int_32 offset_y, - int unit_type)); -#endif - -#if defined(PNG_pCAL_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_pCAL) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_charp *purpose, png_int_32 *X0, png_int_32 *X1, - int *type, int *nparams, png_charp *units, png_charpp *params)); -#endif - -#if defined(PNG_pCAL_SUPPORTED) -extern PNG_EXPORT(void,png_set_pCAL) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_charp purpose, png_int_32 X0, png_int_32 X1, - int type, int nparams, png_charp units, png_charpp params)); -#endif - -#if defined(PNG_pHYs_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_pHYs) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type)); -#endif - -#if defined(PNG_pHYs_SUPPORTED) -extern PNG_EXPORT(void,png_set_pHYs) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type)); -#endif - -extern PNG_EXPORT(png_uint_32,png_get_PLTE) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_colorp *palette, int *num_palette)); - -extern PNG_EXPORT(void,png_set_PLTE) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_colorp palette, int num_palette)); - -#if defined(PNG_sBIT_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_sBIT) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_color_8p *sig_bit)); -#endif - -#if defined(PNG_sBIT_SUPPORTED) -extern PNG_EXPORT(void,png_set_sBIT) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_color_8p sig_bit)); -#endif - -#if defined(PNG_sRGB_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_sRGB) PNGARG((png_structp png_ptr, - png_infop info_ptr, int *intent)); -#endif - -#if defined(PNG_sRGB_SUPPORTED) -extern PNG_EXPORT(void,png_set_sRGB) PNGARG((png_structp png_ptr, - png_infop info_ptr, int intent)); -extern PNG_EXPORT(void,png_set_sRGB_gAMA_and_cHRM) PNGARG((png_structp png_ptr, - png_infop info_ptr, int intent)); -#endif - -#if defined(PNG_iCCP_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_iCCP) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_charpp name, int *compression_type, - png_charpp profile, png_uint_32 *proflen)); - /* Note to maintainer: profile should be png_bytepp */ -#endif - -#if defined(PNG_iCCP_SUPPORTED) -extern PNG_EXPORT(void,png_set_iCCP) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_charp name, int compression_type, - png_charp profile, png_uint_32 proflen)); - /* Note to maintainer: profile should be png_bytep */ -#endif - -#if defined(PNG_sPLT_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_sPLT) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_sPLT_tpp entries)); -#endif - -#if defined(PNG_sPLT_SUPPORTED) -extern PNG_EXPORT(void,png_set_sPLT) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_sPLT_tp entries, int nentries)); -#endif - -#if defined(PNG_TEXT_SUPPORTED) -/* png_get_text also returns the number of text chunks in *num_text */ -extern PNG_EXPORT(png_uint_32,png_get_text) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_textp *text_ptr, int *num_text)); -#endif - -/* - * Note while png_set_text() will accept a structure whose text, - * language, and translated keywords are NULL pointers, the structure - * returned by png_get_text will always contain regular - * zero-terminated C strings. They might be empty strings but - * they will never be NULL pointers. - */ - -#if defined(PNG_TEXT_SUPPORTED) -extern PNG_EXPORT(void,png_set_text) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_textp text_ptr, int num_text)); -#endif - -#if defined(PNG_tIME_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_tIME) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_timep *mod_time)); -#endif - -#if defined(PNG_tIME_SUPPORTED) -extern PNG_EXPORT(void,png_set_tIME) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_timep mod_time)); -#endif - -#if defined(PNG_tRNS_SUPPORTED) -extern PNG_EXPORT(png_uint_32,png_get_tRNS) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_bytep *trans, int *num_trans, - png_color_16p *trans_values)); -#endif - -#if defined(PNG_tRNS_SUPPORTED) -extern PNG_EXPORT(void,png_set_tRNS) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_bytep trans, int num_trans, - png_color_16p trans_values)); -#endif - -#if defined(PNG_tRNS_SUPPORTED) -#endif - -#if defined(PNG_sCAL_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(png_uint_32,png_get_sCAL) PNGARG((png_structp png_ptr, - png_infop info_ptr, int *unit, double *width, double *height)); -#else -#ifdef PNG_FIXED_POINT_SUPPORTED -extern PNG_EXPORT(png_uint_32,png_get_sCAL_s) PNGARG((png_structp png_ptr, - png_infop info_ptr, int *unit, png_charpp swidth, png_charpp sheight)); -#endif -#endif -#endif /* PNG_sCAL_SUPPORTED */ - -#if defined(PNG_sCAL_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_sCAL) PNGARG((png_structp png_ptr, - png_infop info_ptr, int unit, double width, double height)); -#else -#ifdef PNG_FIXED_POINT_SUPPORTED -extern PNG_EXPORT(void,png_set_sCAL_s) PNGARG((png_structp png_ptr, - png_infop info_ptr, int unit, png_charp swidth, png_charp sheight)); -#endif -#endif -#endif /* PNG_sCAL_SUPPORTED || PNG_WRITE_sCAL_SUPPORTED */ - -#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) -/* provide a list of chunks and how they are to be handled, if the built-in - handling or default unknown chunk handling is not desired. Any chunks not - listed will be handled in the default manner. The IHDR and IEND chunks - must not be listed. - keep = 0: follow default behaviour - = 1: do not keep - = 2: keep only if safe-to-copy - = 3: keep even if unsafe-to-copy -*/ -extern PNG_EXPORT(void, png_set_keep_unknown_chunks) PNGARG((png_structp - png_ptr, int keep, png_bytep chunk_list, int num_chunks)); -extern PNG_EXPORT(void, png_set_unknown_chunks) PNGARG((png_structp png_ptr, - png_infop info_ptr, png_unknown_chunkp unknowns, int num_unknowns)); -extern PNG_EXPORT(void, png_set_unknown_chunk_location) - PNGARG((png_structp png_ptr, png_infop info_ptr, int chunk, int location)); -extern PNG_EXPORT(png_uint_32,png_get_unknown_chunks) PNGARG((png_structp - png_ptr, png_infop info_ptr, png_unknown_chunkpp entries)); -#endif -#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED -PNG_EXPORT(int,png_handle_as_unknown) PNGARG((png_structp png_ptr, png_bytep - chunk_name)); -#endif - -/* Png_free_data() will turn off the "valid" flag for anything it frees. - If you need to turn it off for a chunk that your application has freed, - you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); */ -extern PNG_EXPORT(void, png_set_invalid) PNGARG((png_structp png_ptr, - png_infop info_ptr, int mask)); - -#if defined(PNG_INFO_IMAGE_SUPPORTED) -/* The "params" pointer is currently not used and is for future expansion. */ -extern PNG_EXPORT(void, png_read_png) PNGARG((png_structp png_ptr, - png_infop info_ptr, - int transforms, - png_voidp params)); -extern PNG_EXPORT(void, png_write_png) PNGARG((png_structp png_ptr, - png_infop info_ptr, - int transforms, - png_voidp params)); -#endif - -/* Define PNG_DEBUG at compile time for debugging information. Higher - * numbers for PNG_DEBUG mean more debugging information. This has - * only been added since version 0.95 so it is not implemented throughout - * libpng yet, but more support will be added as needed. - */ -#ifdef PNG_DEBUG -#if (PNG_DEBUG > 0) -#if !defined(PNG_DEBUG_FILE) && defined(_MSC_VER) -#include <crtdbg.h> -#if (PNG_DEBUG > 1) -#ifndef _DEBUG -# define _DEBUG -#endif -#ifndef png_debug -#define png_debug(l,m) _RPT0(_CRT_WARN,m PNG_STRING_NEWLINE) -#endif -#ifndef png_debug1 -#define png_debug1(l,m,p1) _RPT1(_CRT_WARN,m PNG_STRING_NEWLINE,p1) -#endif -#ifndef png_debug2 -#define png_debug2(l,m,p1,p2) _RPT2(_CRT_WARN,m PNG_STRING_NEWLINE,p1,p2) -#endif -#endif -#else /* PNG_DEBUG_FILE || !_MSC_VER */ -#ifndef PNG_DEBUG_FILE -#define PNG_DEBUG_FILE stderr -#endif /* PNG_DEBUG_FILE */ - -#if (PNG_DEBUG > 1) -/* Note: ["%s"m PNG_STRING_NEWLINE] probably does not work on - * non-ISO compilers */ -# ifdef __STDC__ -# ifndef png_debug -# define png_debug(l,m) \ - { \ - int num_tabs=l; \ - fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \ - (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":"")))); \ - } -# endif -# ifndef png_debug1 -# define png_debug1(l,m,p1) \ - { \ - int num_tabs=l; \ - fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \ - (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))),p1); \ - } -# endif -# ifndef png_debug2 -# define png_debug2(l,m,p1,p2) \ - { \ - int num_tabs=l; \ - fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \ - (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))),p1,p2); \ - } -# endif -# else /* __STDC __ */ -# ifndef png_debug -# define png_debug(l,m) \ - { \ - int num_tabs=l; \ - char format[256]; \ - snprintf(format,256,"%s%s%s",(num_tabs==1 ? "\t" : \ - (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))), \ - m,PNG_STRING_NEWLINE); \ - fprintf(PNG_DEBUG_FILE,format); \ - } -# endif -# ifndef png_debug1 -# define png_debug1(l,m,p1) \ - { \ - int num_tabs=l; \ - char format[256]; \ - snprintf(format,256,"%s%s%s",(num_tabs==1 ? "\t" : \ - (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))), \ - m,PNG_STRING_NEWLINE); \ - fprintf(PNG_DEBUG_FILE,format,p1); \ - } -# endif -# ifndef png_debug2 -# define png_debug2(l,m,p1,p2) \ - { \ - int num_tabs=l; \ - char format[256]; \ - snprintf(format,256,"%s%s%s",(num_tabs==1 ? "\t" : \ - (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))), \ - m,PNG_STRING_NEWLINE); \ - fprintf(PNG_DEBUG_FILE,format,p1,p2); \ - } -# endif -# endif /* __STDC __ */ -#endif /* (PNG_DEBUG > 1) */ - -#endif /* _MSC_VER */ -#endif /* (PNG_DEBUG > 0) */ -#endif /* PNG_DEBUG */ -#ifndef png_debug -#define png_debug(l, m) -#endif -#ifndef png_debug1 -#define png_debug1(l, m, p1) -#endif -#ifndef png_debug2 -#define png_debug2(l, m, p1, p2) -#endif - -extern PNG_EXPORT(png_charp,png_get_copyright) PNGARG((png_structp png_ptr)); -extern PNG_EXPORT(png_charp,png_get_header_ver) PNGARG((png_structp png_ptr)); -extern PNG_EXPORT(png_charp,png_get_header_version) PNGARG((png_structp png_ptr)); -extern PNG_EXPORT(png_charp,png_get_libpng_ver) PNGARG((png_structp png_ptr)); - -#ifdef PNG_MNG_FEATURES_SUPPORTED -extern PNG_EXPORT(png_uint_32,png_permit_mng_features) PNGARG((png_structp - png_ptr, png_uint_32 mng_features_permitted)); -#endif - -/* For use in png_set_keep_unknown, added to version 1.2.6 */ -#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 -#define PNG_HANDLE_CHUNK_NEVER 1 -#define PNG_HANDLE_CHUNK_IF_SAFE 2 -#define PNG_HANDLE_CHUNK_ALWAYS 3 - -/* Added to version 1.2.0 */ -#if defined(PNG_ASSEMBLER_CODE_SUPPORTED) -#if defined(PNG_MMX_CODE_SUPPORTED) -#define PNG_ASM_FLAG_MMX_SUPPORT_COMPILED 0x01 /* not user-settable */ -#define PNG_ASM_FLAG_MMX_SUPPORT_IN_CPU 0x02 /* not user-settable */ -#define PNG_ASM_FLAG_MMX_READ_COMBINE_ROW 0x04 -#define PNG_ASM_FLAG_MMX_READ_INTERLACE 0x08 -#define PNG_ASM_FLAG_MMX_READ_FILTER_SUB 0x10 -#define PNG_ASM_FLAG_MMX_READ_FILTER_UP 0x20 -#define PNG_ASM_FLAG_MMX_READ_FILTER_AVG 0x40 -#define PNG_ASM_FLAG_MMX_READ_FILTER_PAETH 0x80 -#define PNG_ASM_FLAGS_INITIALIZED 0x80000000 /* not user-settable */ - -#define PNG_MMX_READ_FLAGS ( PNG_ASM_FLAG_MMX_READ_COMBINE_ROW \ - | PNG_ASM_FLAG_MMX_READ_INTERLACE \ - | PNG_ASM_FLAG_MMX_READ_FILTER_SUB \ - | PNG_ASM_FLAG_MMX_READ_FILTER_UP \ - | PNG_ASM_FLAG_MMX_READ_FILTER_AVG \ - | PNG_ASM_FLAG_MMX_READ_FILTER_PAETH ) -#define PNG_MMX_WRITE_FLAGS ( 0 ) - -#define PNG_MMX_FLAGS ( PNG_ASM_FLAG_MMX_SUPPORT_COMPILED \ - | PNG_ASM_FLAG_MMX_SUPPORT_IN_CPU \ - | PNG_MMX_READ_FLAGS \ - | PNG_MMX_WRITE_FLAGS ) - -#define PNG_SELECT_READ 1 -#define PNG_SELECT_WRITE 2 -#endif /* PNG_MMX_CODE_SUPPORTED */ - -#if !defined(PNG_1_0_X) -/* pngget.c */ -extern PNG_EXPORT(png_uint_32,png_get_mmx_flagmask) - PNGARG((int flag_select, int *compilerID)); - -/* pngget.c */ -extern PNG_EXPORT(png_uint_32,png_get_asm_flagmask) - PNGARG((int flag_select)); - -/* pngget.c */ -extern PNG_EXPORT(png_uint_32,png_get_asm_flags) - PNGARG((png_structp png_ptr)); - -/* pngget.c */ -extern PNG_EXPORT(png_byte,png_get_mmx_bitdepth_threshold) - PNGARG((png_structp png_ptr)); - -/* pngget.c */ -extern PNG_EXPORT(png_uint_32,png_get_mmx_rowbytes_threshold) - PNGARG((png_structp png_ptr)); - -/* pngset.c */ -extern PNG_EXPORT(void,png_set_asm_flags) - PNGARG((png_structp png_ptr, png_uint_32 asm_flags)); - -/* pngset.c */ -extern PNG_EXPORT(void,png_set_mmx_thresholds) - PNGARG((png_structp png_ptr, png_byte mmx_bitdepth_threshold, - png_uint_32 mmx_rowbytes_threshold)); - -#endif /* PNG_1_0_X */ - -#if !defined(PNG_1_0_X) -/* png.c, pnggccrd.c, or pngvcrd.c */ -extern PNG_EXPORT(int,png_mmx_support) PNGARG((void)); -#endif /* PNG_1_0_X */ -#endif /* PNG_ASSEMBLER_CODE_SUPPORTED */ - -/* Strip the prepended error numbers ("#nnn ") from error and warning - * messages before passing them to the error or warning handler. */ -#ifdef PNG_ERROR_NUMBERS_SUPPORTED -extern PNG_EXPORT(void,png_set_strip_error_numbers) PNGARG((png_structp - png_ptr, png_uint_32 strip_mode)); -#endif - -/* Added at libpng-1.2.6 */ -#ifdef PNG_SET_USER_LIMITS_SUPPORTED -extern PNG_EXPORT(void,png_set_user_limits) PNGARG((png_structp - png_ptr, png_uint_32 user_width_max, png_uint_32 user_height_max)); -extern PNG_EXPORT(png_uint_32,png_get_user_width_max) PNGARG((png_structp - png_ptr)); -extern PNG_EXPORT(png_uint_32,png_get_user_height_max) PNGARG((png_structp - png_ptr)); -#endif - - -/* Maintainer: Put new public prototypes here ^, in libpng.3, and project defs */ - -#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED -/* With these routines we avoid an integer divide, which will be slower on - * most machines. However, it does take more operations than the corresponding - * divide method, so it may be slower on a few RISC systems. There are two - * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. - * - * Note that the rounding factors are NOT supposed to be the same! 128 and - * 32768 are correct for the NODIV code; 127 and 32767 are correct for the - * standard method. - * - * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] - */ - - /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ - -# define png_composite(composite, fg, alpha, bg) \ - { png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) * (png_uint_16)(alpha) \ - + (png_uint_16)(bg)*(png_uint_16)(255 - \ - (png_uint_16)(alpha)) + (png_uint_16)128); \ - (composite) = (png_byte)((temp + (temp >> 8)) >> 8); } - -# define png_composite_16(composite, fg, alpha, bg) \ - { png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) * (png_uint_32)(alpha) \ - + (png_uint_32)(bg)*(png_uint_32)(65535L - \ - (png_uint_32)(alpha)) + (png_uint_32)32768L); \ - (composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); } - -#else /* standard method using integer division */ - -# define png_composite(composite, fg, alpha, bg) \ - (composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) + \ - (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ - (png_uint_16)127) / 255) - -# define png_composite_16(composite, fg, alpha, bg) \ - (composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \ - (png_uint_32)(bg)*(png_uint_32)(65535L - (png_uint_32)(alpha)) + \ - (png_uint_32)32767) / (png_uint_32)65535L) - -#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */ - -/* Inline macros to do direct reads of bytes from the input buffer. These - * require that you are using an architecture that uses PNG byte ordering - * (MSB first) and supports unaligned data storage. I think that PowerPC - * in big-endian mode and 680x0 are the only ones that will support this. - * The x86 line of processors definitely do not. The png_get_int_32() - * routine also assumes we are using two's complement format for negative - * values, which is almost certainly true. - */ -#if defined(PNG_READ_BIG_ENDIAN_SUPPORTED) -# define png_get_uint_32(buf) ( *((png_uint_32p) (buf))) -# define png_get_uint_16(buf) ( *((png_uint_16p) (buf))) -# define png_get_int_32(buf) ( *((png_int_32p) (buf))) -#else -extern PNG_EXPORT(png_uint_32,png_get_uint_32) PNGARG((png_bytep buf)); -extern PNG_EXPORT(png_uint_16,png_get_uint_16) PNGARG((png_bytep buf)); -extern PNG_EXPORT(png_int_32,png_get_int_32) PNGARG((png_bytep buf)); -#endif /* !PNG_READ_BIG_ENDIAN_SUPPORTED */ -extern PNG_EXPORT(png_uint_32,png_get_uint_31) - PNGARG((png_structp png_ptr, png_bytep buf)); -/* No png_get_int_16 -- may be added if there's a real need for it. */ - -/* Place a 32-bit number into a buffer in PNG byte order (big-endian). - */ -extern PNG_EXPORT(void,png_save_uint_32) - PNGARG((png_bytep buf, png_uint_32 i)); -extern PNG_EXPORT(void,png_save_int_32) - PNGARG((png_bytep buf, png_int_32 i)); - -/* Place a 16-bit number into a buffer in PNG byte order. - * The parameter is declared unsigned int, not png_uint_16, - * just to avoid potential problems on pre-ANSI C compilers. - */ -extern PNG_EXPORT(void,png_save_uint_16) - PNGARG((png_bytep buf, unsigned int i)); -/* No png_save_int_16 -- may be added if there's a real need for it. */ - -/* ************************************************************************* */ - -/* These next functions are used internally in the code. They generally - * shouldn't be used unless you are writing code to add or replace some - * functionality in libpng. More information about most functions can - * be found in the files where the functions are located. - */ - - -/* Various modes of operation, that are visible to applications because - * they are used for unknown chunk location. - */ -#define PNG_HAVE_IHDR 0x01 -#define PNG_HAVE_PLTE 0x02 -#define PNG_HAVE_IDAT 0x04 -#define PNG_AFTER_IDAT 0x08 /* Have complete zlib datastream */ -#define PNG_HAVE_IEND 0x10 - -#if defined(PNG_INTERNAL) - -/* More modes of operation. Note that after an init, mode is set to - * zero automatically when the structure is created. - */ -#define PNG_HAVE_gAMA 0x20 -#define PNG_HAVE_cHRM 0x40 -#define PNG_HAVE_sRGB 0x80 -#define PNG_HAVE_CHUNK_HEADER 0x100 -#define PNG_WROTE_tIME 0x200 -#define PNG_WROTE_INFO_BEFORE_PLTE 0x400 -#define PNG_BACKGROUND_IS_GRAY 0x800 -#define PNG_HAVE_PNG_SIGNATURE 0x1000 -#define PNG_HAVE_CHUNK_AFTER_IDAT 0x2000 /* Have another chunk after IDAT */ - -/* flags for the transformations the PNG library does on the image data */ -#define PNG_BGR 0x0001 -#define PNG_INTERLACE 0x0002 -#define PNG_PACK 0x0004 -#define PNG_SHIFT 0x0008 -#define PNG_SWAP_BYTES 0x0010 -#define PNG_INVERT_MONO 0x0020 -#define PNG_DITHER 0x0040 -#define PNG_BACKGROUND 0x0080 -#define PNG_BACKGROUND_EXPAND 0x0100 - /* 0x0200 unused */ -#define PNG_16_TO_8 0x0400 -#define PNG_RGBA 0x0800 -#define PNG_EXPAND 0x1000 -#define PNG_GAMMA 0x2000 -#define PNG_GRAY_TO_RGB 0x4000 -#define PNG_FILLER 0x8000L -#define PNG_PACKSWAP 0x10000L -#define PNG_SWAP_ALPHA 0x20000L -#define PNG_STRIP_ALPHA 0x40000L -#define PNG_INVERT_ALPHA 0x80000L -#define PNG_USER_TRANSFORM 0x100000L -#define PNG_RGB_TO_GRAY_ERR 0x200000L -#define PNG_RGB_TO_GRAY_WARN 0x400000L -#define PNG_RGB_TO_GRAY 0x600000L /* two bits, RGB_TO_GRAY_ERR|WARN */ - /* 0x800000L Unused */ -#define PNG_ADD_ALPHA 0x1000000L /* Added to libpng-1.2.7 */ -#define PNG_EXPAND_tRNS 0x2000000L /* Added to libpng-1.2.9 */ - /* 0x4000000L unused */ - /* 0x8000000L unused */ - /* 0x10000000L unused */ - /* 0x20000000L unused */ - /* 0x40000000L unused */ - -/* flags for png_create_struct */ -#define PNG_STRUCT_PNG 0x0001 -#define PNG_STRUCT_INFO 0x0002 - -/* Scaling factor for filter heuristic weighting calculations */ -#define PNG_WEIGHT_SHIFT 8 -#define PNG_WEIGHT_FACTOR (1<<(PNG_WEIGHT_SHIFT)) -#define PNG_COST_SHIFT 3 -#define PNG_COST_FACTOR (1<<(PNG_COST_SHIFT)) - -/* flags for the png_ptr->flags rather than declaring a byte for each one */ -#define PNG_FLAG_ZLIB_CUSTOM_STRATEGY 0x0001 -#define PNG_FLAG_ZLIB_CUSTOM_LEVEL 0x0002 -#define PNG_FLAG_ZLIB_CUSTOM_MEM_LEVEL 0x0004 -#define PNG_FLAG_ZLIB_CUSTOM_WINDOW_BITS 0x0008 -#define PNG_FLAG_ZLIB_CUSTOM_METHOD 0x0010 -#define PNG_FLAG_ZLIB_FINISHED 0x0020 -#define PNG_FLAG_ROW_INIT 0x0040 -#define PNG_FLAG_FILLER_AFTER 0x0080 -#define PNG_FLAG_CRC_ANCILLARY_USE 0x0100 -#define PNG_FLAG_CRC_ANCILLARY_NOWARN 0x0200 -#define PNG_FLAG_CRC_CRITICAL_USE 0x0400 -#define PNG_FLAG_CRC_CRITICAL_IGNORE 0x0800 -#define PNG_FLAG_FREE_PLTE 0x1000 -#define PNG_FLAG_FREE_TRNS 0x2000 -#define PNG_FLAG_FREE_HIST 0x4000 -#define PNG_FLAG_KEEP_UNKNOWN_CHUNKS 0x8000L -#define PNG_FLAG_KEEP_UNSAFE_CHUNKS 0x10000L -#define PNG_FLAG_LIBRARY_MISMATCH 0x20000L -#define PNG_FLAG_STRIP_ERROR_NUMBERS 0x40000L -#define PNG_FLAG_STRIP_ERROR_TEXT 0x80000L -#define PNG_FLAG_MALLOC_NULL_MEM_OK 0x100000L -#define PNG_FLAG_ADD_ALPHA 0x200000L /* Added to libpng-1.2.8 */ -#define PNG_FLAG_STRIP_ALPHA 0x400000L /* Added to libpng-1.2.8 */ - /* 0x800000L unused */ - /* 0x1000000L unused */ - /* 0x2000000L unused */ - /* 0x4000000L unused */ - /* 0x8000000L unused */ - /* 0x10000000L unused */ - /* 0x20000000L unused */ - /* 0x40000000L unused */ - -#define PNG_FLAG_CRC_ANCILLARY_MASK (PNG_FLAG_CRC_ANCILLARY_USE | \ - PNG_FLAG_CRC_ANCILLARY_NOWARN) - -#define PNG_FLAG_CRC_CRITICAL_MASK (PNG_FLAG_CRC_CRITICAL_USE | \ - PNG_FLAG_CRC_CRITICAL_IGNORE) - -#define PNG_FLAG_CRC_MASK (PNG_FLAG_CRC_ANCILLARY_MASK | \ - PNG_FLAG_CRC_CRITICAL_MASK) - -/* save typing and make code easier to understand */ - -#define PNG_COLOR_DIST(c1, c2) (abs((int)((c1).red) - (int)((c2).red)) + \ - abs((int)((c1).green) - (int)((c2).green)) + \ - abs((int)((c1).blue) - (int)((c2).blue))) - -/* Added to libpng-1.2.6 JB */ -#define PNG_ROWBYTES(pixel_bits, width) \ - ((pixel_bits) >= 8 ? \ - ((width) * (((png_uint_32)(pixel_bits)) >> 3)) : \ - (( ((width) * ((png_uint_32)(pixel_bits))) + 7) >> 3) ) - -/* PNG_OUT_OF_RANGE returns true if value is outside the range - ideal-delta..ideal+delta. Each argument is evaluated twice. - "ideal" and "delta" should be constants, normally simple - integers, "value" a variable. Added to libpng-1.2.6 JB */ -#define PNG_OUT_OF_RANGE(value, ideal, delta) \ - ( (value) < (ideal)-(delta) || (value) > (ideal)+(delta) ) - -/* variables declared in png.c - only it needs to define PNG_NO_EXTERN */ -#if !defined(PNG_NO_EXTERN) || defined(PNG_ALWAYS_EXTERN) -/* place to hold the signature string for a PNG file. */ -#ifdef PNG_USE_GLOBAL_ARRAYS - PNG_EXPORT_VAR (PNG_CONST png_byte FARDATA) png_sig[8]; -#else -#endif -#endif /* PNG_NO_EXTERN */ - -/* Constant strings for known chunk types. If you need to add a chunk, - * define the name here, and add an invocation of the macro in png.c and - * wherever it's needed. - */ -#define PNG_IHDR png_byte png_IHDR[5] = { 73, 72, 68, 82, '\0'} -#define PNG_IDAT png_byte png_IDAT[5] = { 73, 68, 65, 84, '\0'} -#define PNG_IEND png_byte png_IEND[5] = { 73, 69, 78, 68, '\0'} -#define PNG_PLTE png_byte png_PLTE[5] = { 80, 76, 84, 69, '\0'} -#define PNG_bKGD png_byte png_bKGD[5] = { 98, 75, 71, 68, '\0'} -#define PNG_cHRM png_byte png_cHRM[5] = { 99, 72, 82, 77, '\0'} -#define PNG_gAMA png_byte png_gAMA[5] = {103, 65, 77, 65, '\0'} -#define PNG_hIST png_byte png_hIST[5] = {104, 73, 83, 84, '\0'} -#define PNG_iCCP png_byte png_iCCP[5] = {105, 67, 67, 80, '\0'} -#define PNG_iTXt png_byte png_iTXt[5] = {105, 84, 88, 116, '\0'} -#define PNG_oFFs png_byte png_oFFs[5] = {111, 70, 70, 115, '\0'} -#define PNG_pCAL png_byte png_pCAL[5] = {112, 67, 65, 76, '\0'} -#define PNG_sCAL png_byte png_sCAL[5] = {115, 67, 65, 76, '\0'} -#define PNG_pHYs png_byte png_pHYs[5] = {112, 72, 89, 115, '\0'} -#define PNG_sBIT png_byte png_sBIT[5] = {115, 66, 73, 84, '\0'} -#define PNG_sPLT png_byte png_sPLT[5] = {115, 80, 76, 84, '\0'} -#define PNG_sRGB png_byte png_sRGB[5] = {115, 82, 71, 66, '\0'} -#define PNG_tEXt png_byte png_tEXt[5] = {116, 69, 88, 116, '\0'} -#define PNG_tIME png_byte png_tIME[5] = {116, 73, 77, 69, '\0'} -#define PNG_tRNS png_byte png_tRNS[5] = {116, 82, 78, 83, '\0'} -#define PNG_zTXt png_byte png_zTXt[5] = {122, 84, 88, 116, '\0'} - -#ifdef PNG_USE_GLOBAL_ARRAYS -PNG_EXPORT_VAR (png_byte FARDATA) png_IHDR[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_IDAT[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_IEND[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_PLTE[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_bKGD[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_cHRM[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_gAMA[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_hIST[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_iCCP[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_iTXt[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_oFFs[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_pCAL[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_sCAL[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_pHYs[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_sBIT[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_sPLT[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_sRGB[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_tEXt[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_tIME[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_tRNS[5]; -PNG_EXPORT_VAR (png_byte FARDATA) png_zTXt[5]; -#endif /* PNG_USE_GLOBAL_ARRAYS */ - -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -/* Initialize png_ptr struct for reading, and allocate any other memory. - * (old interface - DEPRECATED - use png_create_read_struct instead). - */ -extern PNG_EXPORT(void,png_read_init) PNGARG((png_structp png_ptr)); -#undef png_read_init -#define png_read_init(png_ptr) png_read_init_3(&png_ptr, \ - PNG_LIBPNG_VER_STRING, png_sizeof(png_struct)); -#endif - -extern PNG_EXPORT(void,png_read_init_3) PNGARG((png_structpp ptr_ptr, - png_const_charp user_png_ver, png_size_t png_struct_size)); -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -extern PNG_EXPORT(void,png_read_init_2) PNGARG((png_structp png_ptr, - png_const_charp user_png_ver, png_size_t png_struct_size, png_size_t - png_info_size)); -#endif - -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -/* Initialize png_ptr struct for writing, and allocate any other memory. - * (old interface - DEPRECATED - use png_create_write_struct instead). - */ -extern PNG_EXPORT(void,png_write_init) PNGARG((png_structp png_ptr)); -#undef png_write_init -#define png_write_init(png_ptr) png_write_init_3(&png_ptr, \ - PNG_LIBPNG_VER_STRING, png_sizeof(png_struct)); -#endif - -extern PNG_EXPORT(void,png_write_init_3) PNGARG((png_structpp ptr_ptr, - png_const_charp user_png_ver, png_size_t png_struct_size)); -extern PNG_EXPORT(void,png_write_init_2) PNGARG((png_structp png_ptr, - png_const_charp user_png_ver, png_size_t png_struct_size, png_size_t - png_info_size)); - -/* Allocate memory for an internal libpng struct */ -PNG_EXTERN png_voidp png_create_struct PNGARG((int type)); - -/* Free memory from internal libpng struct */ -PNG_EXTERN void png_destroy_struct PNGARG((png_voidp struct_ptr)); - -PNG_EXTERN png_voidp png_create_struct_2 PNGARG((int type, png_malloc_ptr - malloc_fn, png_voidp mem_ptr)); -PNG_EXTERN void png_destroy_struct_2 PNGARG((png_voidp struct_ptr, - png_free_ptr free_fn, png_voidp mem_ptr)); - -/* Free any memory that info_ptr points to and reset struct. */ -PNG_EXTERN void png_info_destroy PNGARG((png_structp png_ptr, - png_infop info_ptr)); - -#ifndef PNG_1_0_X -/* Function to allocate memory for zlib. */ -PNG_EXTERN voidpf png_zalloc PNGARG((voidpf png_ptr, uInt items, uInt size)); - -/* Function to free memory for zlib */ -PNG_EXTERN void png_zfree PNGARG((voidpf png_ptr, voidpf ptr)); - -#ifdef PNG_SIZE_T -/* Function to convert a sizeof an item to png_sizeof item */ - PNG_EXTERN png_size_t PNGAPI png_convert_size PNGARG((size_t size)); -#endif - -/* Next four functions are used internally as callbacks. PNGAPI is required - * but not PNG_EXPORT. PNGAPI added at libpng version 1.2.3. */ - -PNG_EXTERN void PNGAPI png_default_read_data PNGARG((png_structp png_ptr, - png_bytep data, png_size_t length)); - -#ifdef PNG_PROGRESSIVE_READ_SUPPORTED -PNG_EXTERN void PNGAPI png_push_fill_buffer PNGARG((png_structp png_ptr, - png_bytep buffer, png_size_t length)); -#endif - -PNG_EXTERN void PNGAPI png_default_write_data PNGARG((png_structp png_ptr, - png_bytep data, png_size_t length)); - -#if defined(PNG_WRITE_FLUSH_SUPPORTED) -#if !defined(PNG_NO_STDIO) -PNG_EXTERN void PNGAPI png_default_flush PNGARG((png_structp png_ptr)); -#endif -#endif -#else /* PNG_1_0_X */ -#ifdef PNG_PROGRESSIVE_READ_SUPPORTED -PNG_EXTERN void png_push_fill_buffer PNGARG((png_structp png_ptr, - png_bytep buffer, png_size_t length)); -#endif -#endif /* PNG_1_0_X */ - -/* Reset the CRC variable */ -PNG_EXTERN void png_reset_crc PNGARG((png_structp png_ptr)); - -/* Write the "data" buffer to whatever output you are using. */ -PNG_EXTERN void png_write_data PNGARG((png_structp png_ptr, png_bytep data, - png_size_t length)); - -/* Read data from whatever input you are using into the "data" buffer */ -PNG_EXTERN void png_read_data PNGARG((png_structp png_ptr, png_bytep data, - png_size_t length)); - -/* Read bytes into buf, and update png_ptr->crc */ -PNG_EXTERN void png_crc_read PNGARG((png_structp png_ptr, png_bytep buf, - png_size_t length)); - -/* Decompress data in a chunk that uses compression */ -#if defined(PNG_zTXt_SUPPORTED) || defined(PNG_iTXt_SUPPORTED) || \ - defined(PNG_iCCP_SUPPORTED) || defined(PNG_sPLT_SUPPORTED) -PNG_EXTERN void png_decompress_chunk PNGARG((png_structp png_ptr, - int comp_type, png_size_t chunklength, - png_size_t prefix_length, png_size_t *data_length)); -#endif - -/* Read "skip" bytes, read the file crc, and (optionally) verify png_ptr->crc */ -PNG_EXTERN int png_crc_finish PNGARG((png_structp png_ptr, png_uint_32 skip)); - -/* Read the CRC from the file and compare it to the libpng calculated CRC */ -PNG_EXTERN int png_crc_error PNGARG((png_structp png_ptr)); - -/* Calculate the CRC over a section of data. Note that we are only - * passing a maximum of 64K on systems that have this as a memory limit, - * since this is the maximum buffer size we can specify. - */ -PNG_EXTERN void png_calculate_crc PNGARG((png_structp png_ptr, png_bytep ptr, - png_size_t length)); - -#if defined(PNG_WRITE_FLUSH_SUPPORTED) -PNG_EXTERN void png_flush PNGARG((png_structp png_ptr)); -#endif - -/* simple function to write the signature */ -PNG_EXTERN void png_write_sig PNGARG((png_structp png_ptr)); - -/* write various chunks */ - -/* Write the IHDR chunk, and update the png_struct with the necessary - * information. - */ -PNG_EXTERN void png_write_IHDR PNGARG((png_structp png_ptr, png_uint_32 width, - png_uint_32 height, - int bit_depth, int color_type, int compression_method, int filter_method, - int interlace_method)); - -PNG_EXTERN void png_write_PLTE PNGARG((png_structp png_ptr, png_colorp palette, - png_uint_32 num_pal)); - -PNG_EXTERN void png_write_IDAT PNGARG((png_structp png_ptr, png_bytep data, - png_size_t length)); - -PNG_EXTERN void png_write_IEND PNGARG((png_structp png_ptr)); - -#if defined(PNG_WRITE_gAMA_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -PNG_EXTERN void png_write_gAMA PNGARG((png_structp png_ptr, double file_gamma)); -#endif -#ifdef PNG_FIXED_POINT_SUPPORTED -PNG_EXTERN void png_write_gAMA_fixed PNGARG((png_structp png_ptr, png_fixed_point - file_gamma)); -#endif -#endif - -#if defined(PNG_WRITE_sBIT_SUPPORTED) -PNG_EXTERN void png_write_sBIT PNGARG((png_structp png_ptr, png_color_8p sbit, - int color_type)); -#endif - -#if defined(PNG_WRITE_cHRM_SUPPORTED) -#ifdef PNG_FLOATING_POINT_SUPPORTED -PNG_EXTERN void png_write_cHRM PNGARG((png_structp png_ptr, - double white_x, double white_y, - double red_x, double red_y, double green_x, double green_y, - double blue_x, double blue_y)); -#endif -#ifdef PNG_FIXED_POINT_SUPPORTED -PNG_EXTERN void png_write_cHRM_fixed PNGARG((png_structp png_ptr, - png_fixed_point int_white_x, png_fixed_point int_white_y, - png_fixed_point int_red_x, png_fixed_point int_red_y, png_fixed_point - int_green_x, png_fixed_point int_green_y, png_fixed_point int_blue_x, - png_fixed_point int_blue_y)); -#endif -#endif - -#if defined(PNG_WRITE_sRGB_SUPPORTED) -PNG_EXTERN void png_write_sRGB PNGARG((png_structp png_ptr, - int intent)); -#endif - -#if defined(PNG_WRITE_iCCP_SUPPORTED) -PNG_EXTERN void png_write_iCCP PNGARG((png_structp png_ptr, - png_charp name, int compression_type, - png_charp profile, int proflen)); - /* Note to maintainer: profile should be png_bytep */ -#endif - -#if defined(PNG_WRITE_sPLT_SUPPORTED) -PNG_EXTERN void png_write_sPLT PNGARG((png_structp png_ptr, - png_sPLT_tp palette)); -#endif - -#if defined(PNG_WRITE_tRNS_SUPPORTED) -PNG_EXTERN void png_write_tRNS PNGARG((png_structp png_ptr, png_bytep trans, - png_color_16p values, int number, int color_type)); -#endif - -#if defined(PNG_WRITE_bKGD_SUPPORTED) -PNG_EXTERN void png_write_bKGD PNGARG((png_structp png_ptr, - png_color_16p values, int color_type)); -#endif - -#if defined(PNG_WRITE_hIST_SUPPORTED) -PNG_EXTERN void png_write_hIST PNGARG((png_structp png_ptr, png_uint_16p hist, - int num_hist)); -#endif - -#if defined(PNG_WRITE_TEXT_SUPPORTED) || defined(PNG_WRITE_pCAL_SUPPORTED) || \ - defined(PNG_WRITE_iCCP_SUPPORTED) || defined(PNG_WRITE_sPLT_SUPPORTED) -PNG_EXTERN png_size_t png_check_keyword PNGARG((png_structp png_ptr, - png_charp key, png_charpp new_key)); -#endif - -#if defined(PNG_WRITE_tEXt_SUPPORTED) -PNG_EXTERN void png_write_tEXt PNGARG((png_structp png_ptr, png_charp key, - png_charp text, png_size_t text_len)); -#endif - -#if defined(PNG_WRITE_zTXt_SUPPORTED) -PNG_EXTERN void png_write_zTXt PNGARG((png_structp png_ptr, png_charp key, - png_charp text, png_size_t text_len, int compression)); -#endif - -#if defined(PNG_WRITE_iTXt_SUPPORTED) -PNG_EXTERN void png_write_iTXt PNGARG((png_structp png_ptr, - int compression, png_charp key, png_charp lang, png_charp lang_key, - png_charp text)); -#endif - -#if defined(PNG_TEXT_SUPPORTED) /* Added at version 1.0.14 and 1.2.4 */ -PNG_EXTERN int png_set_text_2 PNGARG((png_structp png_ptr, - png_infop info_ptr, png_textp text_ptr, int num_text)); -#endif - -#if defined(PNG_WRITE_oFFs_SUPPORTED) -PNG_EXTERN void png_write_oFFs PNGARG((png_structp png_ptr, - png_int_32 x_offset, png_int_32 y_offset, int unit_type)); -#endif - -#if defined(PNG_WRITE_pCAL_SUPPORTED) -PNG_EXTERN void png_write_pCAL PNGARG((png_structp png_ptr, png_charp purpose, - png_int_32 X0, png_int_32 X1, int type, int nparams, - png_charp units, png_charpp params)); -#endif - -#if defined(PNG_WRITE_pHYs_SUPPORTED) -PNG_EXTERN void png_write_pHYs PNGARG((png_structp png_ptr, - png_uint_32 x_pixels_per_unit, png_uint_32 y_pixels_per_unit, - int unit_type)); -#endif - -#if defined(PNG_WRITE_tIME_SUPPORTED) -PNG_EXTERN void png_write_tIME PNGARG((png_structp png_ptr, - png_timep mod_time)); -#endif - -#if defined(PNG_WRITE_sCAL_SUPPORTED) -#if defined(PNG_FLOATING_POINT_SUPPORTED) && !defined(PNG_NO_STDIO) -PNG_EXTERN void png_write_sCAL PNGARG((png_structp png_ptr, - int unit, double width, double height)); -#else -#ifdef PNG_FIXED_POINT_SUPPORTED -PNG_EXTERN void png_write_sCAL_s PNGARG((png_structp png_ptr, - int unit, png_charp width, png_charp height)); -#endif -#endif -#endif - -/* Called when finished processing a row of data */ -PNG_EXTERN void png_write_finish_row PNGARG((png_structp png_ptr)); - -/* Internal use only. Called before first row of data */ -PNG_EXTERN void png_write_start_row PNGARG((png_structp png_ptr)); - -#if defined(PNG_READ_GAMMA_SUPPORTED) -PNG_EXTERN void png_build_gamma_table PNGARG((png_structp png_ptr)); -#endif - -/* combine a row of data, dealing with alpha, etc. if requested */ -PNG_EXTERN void png_combine_row PNGARG((png_structp png_ptr, png_bytep row, - int mask)); - -#if defined(PNG_READ_INTERLACING_SUPPORTED) -/* expand an interlaced row */ -/* OLD pre-1.0.9 interface: -PNG_EXTERN void png_do_read_interlace PNGARG((png_row_infop row_info, - png_bytep row, int pass, png_uint_32 transformations)); - */ -PNG_EXTERN void png_do_read_interlace PNGARG((png_structp png_ptr)); -#endif - -/* GRR TO DO (2.0 or whenever): simplify other internal calling interfaces */ - -#if defined(PNG_WRITE_INTERLACING_SUPPORTED) -/* grab pixels out of a row for an interlaced pass */ -PNG_EXTERN void png_do_write_interlace PNGARG((png_row_infop row_info, - png_bytep row, int pass)); -#endif - -/* unfilter a row */ -PNG_EXTERN void png_read_filter_row PNGARG((png_structp png_ptr, - png_row_infop row_info, png_bytep row, png_bytep prev_row, int filter)); - -/* Choose the best filter to use and filter the row data */ -PNG_EXTERN void png_write_find_filter PNGARG((png_structp png_ptr, - png_row_infop row_info)); - -/* Write out the filtered row. */ -PNG_EXTERN void png_write_filtered_row PNGARG((png_structp png_ptr, - png_bytep filtered_row)); -/* finish a row while reading, dealing with interlacing passes, etc. */ -PNG_EXTERN void png_read_finish_row PNGARG((png_structp png_ptr)); - -/* initialize the row buffers, etc. */ -PNG_EXTERN void png_read_start_row PNGARG((png_structp png_ptr)); -/* optional call to update the users info structure */ -PNG_EXTERN void png_read_transform_info PNGARG((png_structp png_ptr, - png_infop info_ptr)); - -/* these are the functions that do the transformations */ -#if defined(PNG_READ_FILLER_SUPPORTED) -PNG_EXTERN void png_do_read_filler PNGARG((png_row_infop row_info, - png_bytep row, png_uint_32 filler, png_uint_32 flags)); -#endif - -#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) -PNG_EXTERN void png_do_read_swap_alpha PNGARG((png_row_infop row_info, - png_bytep row)); -#endif - -#if defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) -PNG_EXTERN void png_do_write_swap_alpha PNGARG((png_row_infop row_info, - png_bytep row)); -#endif - -#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) -PNG_EXTERN void png_do_read_invert_alpha PNGARG((png_row_infop row_info, - png_bytep row)); -#endif - -#if defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) -PNG_EXTERN void png_do_write_invert_alpha PNGARG((png_row_infop row_info, - png_bytep row)); -#endif - -#if defined(PNG_WRITE_FILLER_SUPPORTED) || \ - defined(PNG_READ_STRIP_ALPHA_SUPPORTED) -PNG_EXTERN void png_do_strip_filler PNGARG((png_row_infop row_info, - png_bytep row, png_uint_32 flags)); -#endif - -#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) -PNG_EXTERN void png_do_swap PNGARG((png_row_infop row_info, png_bytep row)); -#endif - -#if defined(PNG_READ_PACKSWAP_SUPPORTED) || defined(PNG_WRITE_PACKSWAP_SUPPORTED) -PNG_EXTERN void png_do_packswap PNGARG((png_row_infop row_info, png_bytep row)); -#endif - -#if defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) -PNG_EXTERN int png_do_rgb_to_gray PNGARG((png_structp png_ptr, png_row_infop - row_info, png_bytep row)); -#endif - -#if defined(PNG_READ_GRAY_TO_RGB_SUPPORTED) -PNG_EXTERN void png_do_gray_to_rgb PNGARG((png_row_infop row_info, - png_bytep row)); -#endif - -#if defined(PNG_READ_PACK_SUPPORTED) -PNG_EXTERN void png_do_unpack PNGARG((png_row_infop row_info, png_bytep row)); -#endif - -#if defined(PNG_READ_SHIFT_SUPPORTED) -PNG_EXTERN void png_do_unshift PNGARG((png_row_infop row_info, png_bytep row, - png_color_8p sig_bits)); -#endif - -#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) -PNG_EXTERN void png_do_invert PNGARG((png_row_infop row_info, png_bytep row)); -#endif - -#if defined(PNG_READ_16_TO_8_SUPPORTED) -PNG_EXTERN void png_do_chop PNGARG((png_row_infop row_info, png_bytep row)); -#endif - -#if defined(PNG_READ_DITHER_SUPPORTED) -PNG_EXTERN void png_do_dither PNGARG((png_row_infop row_info, - png_bytep row, png_bytep palette_lookup, png_bytep dither_lookup)); - -# if defined(PNG_CORRECT_PALETTE_SUPPORTED) -PNG_EXTERN void png_correct_palette PNGARG((png_structp png_ptr, - png_colorp palette, int num_palette)); -# endif -#endif - -#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) -PNG_EXTERN void png_do_bgr PNGARG((png_row_infop row_info, png_bytep row)); -#endif - -#if defined(PNG_WRITE_PACK_SUPPORTED) -PNG_EXTERN void png_do_pack PNGARG((png_row_infop row_info, - png_bytep row, png_uint_32 bit_depth)); -#endif - -#if defined(PNG_WRITE_SHIFT_SUPPORTED) -PNG_EXTERN void png_do_shift PNGARG((png_row_infop row_info, png_bytep row, - png_color_8p bit_depth)); -#endif - -#if defined(PNG_READ_BACKGROUND_SUPPORTED) -#if defined(PNG_READ_GAMMA_SUPPORTED) -PNG_EXTERN void png_do_background PNGARG((png_row_infop row_info, png_bytep row, - png_color_16p trans_values, png_color_16p background, - png_color_16p background_1, - png_bytep gamma_table, png_bytep gamma_from_1, png_bytep gamma_to_1, - png_uint_16pp gamma_16, png_uint_16pp gamma_16_from_1, - png_uint_16pp gamma_16_to_1, int gamma_shift)); -#else -PNG_EXTERN void png_do_background PNGARG((png_row_infop row_info, png_bytep row, - png_color_16p trans_values, png_color_16p background)); -#endif -#endif - -#if defined(PNG_READ_GAMMA_SUPPORTED) -PNG_EXTERN void png_do_gamma PNGARG((png_row_infop row_info, png_bytep row, - png_bytep gamma_table, png_uint_16pp gamma_16_table, - int gamma_shift)); -#endif - -#if defined(PNG_READ_EXPAND_SUPPORTED) -PNG_EXTERN void png_do_expand_palette PNGARG((png_row_infop row_info, - png_bytep row, png_colorp palette, png_bytep trans, int num_trans)); -PNG_EXTERN void png_do_expand PNGARG((png_row_infop row_info, - png_bytep row, png_color_16p trans_value)); -#endif - -/* The following decodes the appropriate chunks, and does error correction, - * then calls the appropriate callback for the chunk if it is valid. - */ - -/* decode the IHDR chunk */ -PNG_EXTERN void png_handle_IHDR PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -PNG_EXTERN void png_handle_PLTE PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -PNG_EXTERN void png_handle_IEND PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); - -#if defined(PNG_READ_bKGD_SUPPORTED) -PNG_EXTERN void png_handle_bKGD PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_cHRM_SUPPORTED) -PNG_EXTERN void png_handle_cHRM PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_gAMA_SUPPORTED) -PNG_EXTERN void png_handle_gAMA PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_hIST_SUPPORTED) -PNG_EXTERN void png_handle_hIST PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_iCCP_SUPPORTED) -extern void png_handle_iCCP PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif /* PNG_READ_iCCP_SUPPORTED */ - -#if defined(PNG_READ_iTXt_SUPPORTED) -PNG_EXTERN void png_handle_iTXt PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_oFFs_SUPPORTED) -PNG_EXTERN void png_handle_oFFs PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_pCAL_SUPPORTED) -PNG_EXTERN void png_handle_pCAL PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_pHYs_SUPPORTED) -PNG_EXTERN void png_handle_pHYs PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_sBIT_SUPPORTED) -PNG_EXTERN void png_handle_sBIT PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_sCAL_SUPPORTED) -PNG_EXTERN void png_handle_sCAL PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_sPLT_SUPPORTED) -extern void png_handle_sPLT PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif /* PNG_READ_sPLT_SUPPORTED */ - -#if defined(PNG_READ_sRGB_SUPPORTED) -PNG_EXTERN void png_handle_sRGB PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_tEXt_SUPPORTED) -PNG_EXTERN void png_handle_tEXt PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_tIME_SUPPORTED) -PNG_EXTERN void png_handle_tIME PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_tRNS_SUPPORTED) -PNG_EXTERN void png_handle_tRNS PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -#if defined(PNG_READ_zTXt_SUPPORTED) -PNG_EXTERN void png_handle_zTXt PNGARG((png_structp png_ptr, png_infop info_ptr, - png_uint_32 length)); -#endif - -PNG_EXTERN void png_handle_unknown PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 length)); - -PNG_EXTERN void png_check_chunk_name PNGARG((png_structp png_ptr, - png_bytep chunk_name)); - -/* handle the transformations for reading and writing */ -PNG_EXTERN void png_do_read_transformations PNGARG((png_structp png_ptr)); -PNG_EXTERN void png_do_write_transformations PNGARG((png_structp png_ptr)); - -PNG_EXTERN void png_init_read_transformations PNGARG((png_structp png_ptr)); - -#ifdef PNG_PROGRESSIVE_READ_SUPPORTED -PNG_EXTERN void png_push_read_chunk PNGARG((png_structp png_ptr, - png_infop info_ptr)); -PNG_EXTERN void png_push_read_sig PNGARG((png_structp png_ptr, - png_infop info_ptr)); -PNG_EXTERN void png_push_check_crc PNGARG((png_structp png_ptr)); -PNG_EXTERN void png_push_crc_skip PNGARG((png_structp png_ptr, - png_uint_32 length)); -PNG_EXTERN void png_push_crc_finish PNGARG((png_structp png_ptr)); -PNG_EXTERN void png_push_save_buffer PNGARG((png_structp png_ptr)); -PNG_EXTERN void png_push_restore_buffer PNGARG((png_structp png_ptr, - png_bytep buffer, png_size_t buffer_length)); -PNG_EXTERN void png_push_read_IDAT PNGARG((png_structp png_ptr)); -PNG_EXTERN void png_process_IDAT_data PNGARG((png_structp png_ptr, - png_bytep buffer, png_size_t buffer_length)); -PNG_EXTERN void png_push_process_row PNGARG((png_structp png_ptr)); -PNG_EXTERN void png_push_handle_unknown PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 length)); -PNG_EXTERN void png_push_have_info PNGARG((png_structp png_ptr, - png_infop info_ptr)); -PNG_EXTERN void png_push_have_end PNGARG((png_structp png_ptr, - png_infop info_ptr)); -PNG_EXTERN void png_push_have_row PNGARG((png_structp png_ptr, png_bytep row)); -PNG_EXTERN void png_push_read_end PNGARG((png_structp png_ptr, - png_infop info_ptr)); -PNG_EXTERN void png_process_some_data PNGARG((png_structp png_ptr, - png_infop info_ptr)); -PNG_EXTERN void png_read_push_finish_row PNGARG((png_structp png_ptr)); -#if defined(PNG_READ_tEXt_SUPPORTED) -PNG_EXTERN void png_push_handle_tEXt PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 length)); -PNG_EXTERN void png_push_read_tEXt PNGARG((png_structp png_ptr, - png_infop info_ptr)); -#endif -#if defined(PNG_READ_zTXt_SUPPORTED) -PNG_EXTERN void png_push_handle_zTXt PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 length)); -PNG_EXTERN void png_push_read_zTXt PNGARG((png_structp png_ptr, - png_infop info_ptr)); -#endif -#if defined(PNG_READ_iTXt_SUPPORTED) -PNG_EXTERN void png_push_handle_iTXt PNGARG((png_structp png_ptr, - png_infop info_ptr, png_uint_32 length)); -PNG_EXTERN void png_push_read_iTXt PNGARG((png_structp png_ptr, - png_infop info_ptr)); -#endif - -#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ - -#ifdef PNG_MNG_FEATURES_SUPPORTED -PNG_EXTERN void png_do_read_intrapixel PNGARG((png_row_infop row_info, - png_bytep row)); -PNG_EXTERN void png_do_write_intrapixel PNGARG((png_row_infop row_info, - png_bytep row)); -#endif - -#if defined(PNG_ASSEMBLER_CODE_SUPPORTED) -#if defined(PNG_MMX_CODE_SUPPORTED) -/* png.c */ /* PRIVATE */ -PNG_EXTERN void png_init_mmx_flags PNGARG((png_structp png_ptr)); -#endif -#endif - -#if defined(PNG_INCH_CONVERSIONS) && defined(PNG_FLOATING_POINT_SUPPORTED) -PNG_EXTERN png_uint_32 png_get_pixels_per_inch PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -PNG_EXTERN png_uint_32 png_get_x_pixels_per_inch PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -PNG_EXTERN png_uint_32 png_get_y_pixels_per_inch PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -PNG_EXTERN float png_get_x_offset_inches PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -PNG_EXTERN float png_get_y_offset_inches PNGARG((png_structp png_ptr, -png_infop info_ptr)); - -#if defined(PNG_pHYs_SUPPORTED) -PNG_EXTERN png_uint_32 png_get_pHYs_dpi PNGARG((png_structp png_ptr, -png_infop info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type)); -#endif /* PNG_pHYs_SUPPORTED */ -#endif /* PNG_INCH_CONVERSIONS && PNG_FLOATING_POINT_SUPPORTED */ - -/* Read the chunk header (length + type name) */ -PNG_EXTERN png_uint_32 png_read_chunk_header PNGARG((png_structp png_ptr)); - -/* Added at libpng version 1.2.34 */ -#if defined(PNG_cHRM_SUPPORTED) -PNG_EXTERN int png_check_cHRM_fixed PNGARG((png_structp png_ptr, - png_fixed_point int_white_x, png_fixed_point int_white_y, - png_fixed_point int_red_x, png_fixed_point int_red_y, png_fixed_point - int_green_x, png_fixed_point int_green_y, png_fixed_point int_blue_x, - png_fixed_point int_blue_y)); -#endif - -/* Maintainer: Put new private prototypes here ^ and in libpngpf.3 */ - -#endif /* PNG_INTERNAL */ - -#ifdef __cplusplus -} -#endif - -#endif /* PNG_VERSION_INFO_ONLY */ -/* do not put anything past this line */ -#endif /* PNG_H */ diff --git a/include/pngconf.h b/include/pngconf.h deleted file mode 100644 index 025368db..00000000 --- a/include/pngconf.h +++ /dev/null @@ -1,1496 +0,0 @@ - -/* pngconf.h - machine configurable file for libpng - * - * libpng version 1.2.37 - June 4, 2009 - * For conditions of distribution and use, see copyright notice in png.h - * Copyright (c) 1998-2009 Glenn Randers-Pehrson - * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) - * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) - */ - -/* Any machine specific code is near the front of this file, so if you - * are configuring libpng for a machine, you may want to read the section - * starting here down to where it starts to typedef png_color, png_text, - * and png_info. - */ - -#ifndef PNGCONF_H -#define PNGCONF_H - -#define PNG_1_2_X - -/* - * PNG_USER_CONFIG has to be defined on the compiler command line. This - * includes the resource compiler for Windows DLL configurations. - */ -#ifdef PNG_USER_CONFIG -# ifndef PNG_USER_PRIVATEBUILD -# define PNG_USER_PRIVATEBUILD -# endif -#include "pngusr.h" -#endif - -/* PNG_CONFIGURE_LIBPNG is set by the "configure" script. */ -#ifdef PNG_CONFIGURE_LIBPNG -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#endif - -/* - * Added at libpng-1.2.8 - * - * If you create a private DLL you need to define in "pngusr.h" the followings: - * #define PNG_USER_PRIVATEBUILD <Describes by whom and why this version of - * the DLL was built> - * e.g. #define PNG_USER_PRIVATEBUILD "Build by MyCompany for xyz reasons." - * #define PNG_USER_DLLFNAME_POSTFIX <two-letter postfix that serve to - * distinguish your DLL from those of the official release. These - * correspond to the trailing letters that come after the version - * number and must match your private DLL name> - * e.g. // private DLL "libpng13gx.dll" - * #define PNG_USER_DLLFNAME_POSTFIX "gx" - * - * The following macros are also at your disposal if you want to complete the - * DLL VERSIONINFO structure. - * - PNG_USER_VERSIONINFO_COMMENTS - * - PNG_USER_VERSIONINFO_COMPANYNAME - * - PNG_USER_VERSIONINFO_LEGALTRADEMARKS - */ - -#ifdef __STDC__ -#ifdef SPECIALBUILD -# pragma message("PNG_LIBPNG_SPECIALBUILD (and deprecated SPECIALBUILD)\ - are now LIBPNG reserved macros. Use PNG_USER_PRIVATEBUILD instead.") -#endif - -#ifdef PRIVATEBUILD -# pragma message("PRIVATEBUILD is deprecated.\ - Use PNG_USER_PRIVATEBUILD instead.") -# define PNG_USER_PRIVATEBUILD PRIVATEBUILD -#endif -#endif /* __STDC__ */ - -#ifndef PNG_VERSION_INFO_ONLY - -/* End of material added to libpng-1.2.8 */ - -/* Added at libpng-1.2.19, removed at libpng-1.2.20 because it caused trouble - Restored at libpng-1.2.21 */ -#if !defined(PNG_NO_WARN_UNINITIALIZED_ROW) && \ - !defined(PNG_WARN_UNINITIALIZED_ROW) -# define PNG_WARN_UNINITIALIZED_ROW 1 -#endif -/* End of material added at libpng-1.2.19/1.2.21 */ - -/* This is the size of the compression buffer, and thus the size of - * an IDAT chunk. Make this whatever size you feel is best for your - * machine. One of these will be allocated per png_struct. When this - * is full, it writes the data to the disk, and does some other - * calculations. Making this an extremely small size will slow - * the library down, but you may want to experiment to determine - * where it becomes significant, if you are concerned with memory - * usage. Note that zlib allocates at least 32Kb also. For readers, - * this describes the size of the buffer available to read the data in. - * Unless this gets smaller than the size of a row (compressed), - * it should not make much difference how big this is. - */ - -#ifndef PNG_ZBUF_SIZE -# define PNG_ZBUF_SIZE 8192 -#endif - -/* Enable if you want a write-only libpng */ - -#ifndef PNG_NO_READ_SUPPORTED -# define PNG_READ_SUPPORTED -#endif - -/* Enable if you want a read-only libpng */ - -#ifndef PNG_NO_WRITE_SUPPORTED -# define PNG_WRITE_SUPPORTED -#endif - -/* Enabled by default in 1.2.0. You can disable this if you don't need to - support PNGs that are embedded in MNG datastreams */ -#if !defined(PNG_1_0_X) && !defined(PNG_NO_MNG_FEATURES) -# ifndef PNG_MNG_FEATURES_SUPPORTED -# define PNG_MNG_FEATURES_SUPPORTED -# endif -#endif - -#ifndef PNG_NO_FLOATING_POINT_SUPPORTED -# ifndef PNG_FLOATING_POINT_SUPPORTED -# define PNG_FLOATING_POINT_SUPPORTED -# endif -#endif - -/* If you are running on a machine where you cannot allocate more - * than 64K of memory at once, uncomment this. While libpng will not - * normally need that much memory in a chunk (unless you load up a very - * large file), zlib needs to know how big of a chunk it can use, and - * libpng thus makes sure to check any memory allocation to verify it - * will fit into memory. -#define PNG_MAX_MALLOC_64K - */ -#if defined(MAXSEG_64K) && !defined(PNG_MAX_MALLOC_64K) -# define PNG_MAX_MALLOC_64K -#endif - -/* Special munging to support doing things the 'cygwin' way: - * 'Normal' png-on-win32 defines/defaults: - * PNG_BUILD_DLL -- building dll - * PNG_USE_DLL -- building an application, linking to dll - * (no define) -- building static library, or building an - * application and linking to the static lib - * 'Cygwin' defines/defaults: - * PNG_BUILD_DLL -- (ignored) building the dll - * (no define) -- (ignored) building an application, linking to the dll - * PNG_STATIC -- (ignored) building the static lib, or building an - * application that links to the static lib. - * ALL_STATIC -- (ignored) building various static libs, or building an - * application that links to the static libs. - * Thus, - * a cygwin user should define either PNG_BUILD_DLL or PNG_STATIC, and - * this bit of #ifdefs will define the 'correct' config variables based on - * that. If a cygwin user *wants* to define 'PNG_USE_DLL' that's okay, but - * unnecessary. - * - * Also, the precedence order is: - * ALL_STATIC (since we can't #undef something outside our namespace) - * PNG_BUILD_DLL - * PNG_STATIC - * (nothing) == PNG_USE_DLL - * - * CYGWIN (2002-01-20): The preceding is now obsolete. With the advent - * of auto-import in binutils, we no longer need to worry about - * __declspec(dllexport) / __declspec(dllimport) and friends. Therefore, - * we don't need to worry about PNG_STATIC or ALL_STATIC when it comes - * to __declspec() stuff. However, we DO need to worry about - * PNG_BUILD_DLL and PNG_STATIC because those change some defaults - * such as CONSOLE_IO and whether GLOBAL_ARRAYS are allowed. - */ -#if defined(__CYGWIN__) -# if defined(ALL_STATIC) -# if defined(PNG_BUILD_DLL) -# undef PNG_BUILD_DLL -# endif -# if defined(PNG_USE_DLL) -# undef PNG_USE_DLL -# endif -# if defined(PNG_DLL) -# undef PNG_DLL -# endif -# if !defined(PNG_STATIC) -# define PNG_STATIC -# endif -# else -# if defined (PNG_BUILD_DLL) -# if defined(PNG_STATIC) -# undef PNG_STATIC -# endif -# if defined(PNG_USE_DLL) -# undef PNG_USE_DLL -# endif -# if !defined(PNG_DLL) -# define PNG_DLL -# endif -# else -# if defined(PNG_STATIC) -# if defined(PNG_USE_DLL) -# undef PNG_USE_DLL -# endif -# if defined(PNG_DLL) -# undef PNG_DLL -# endif -# else -# if !defined(PNG_USE_DLL) -# define PNG_USE_DLL -# endif -# if !defined(PNG_DLL) -# define PNG_DLL -# endif -# endif -# endif -# endif -#endif - -/* This protects us against compilers that run on a windowing system - * and thus don't have or would rather us not use the stdio types: - * stdin, stdout, and stderr. The only one currently used is stderr - * in png_error() and png_warning(). #defining PNG_NO_CONSOLE_IO will - * prevent these from being compiled and used. #defining PNG_NO_STDIO - * will also prevent these, plus will prevent the entire set of stdio - * macros and functions (FILE *, printf, etc.) from being compiled and used, - * unless (PNG_DEBUG > 0) has been #defined. - * - * #define PNG_NO_CONSOLE_IO - * #define PNG_NO_STDIO - */ - -#if defined(_WIN32_WCE) -# include <windows.h> - /* Console I/O functions are not supported on WindowsCE */ -# define PNG_NO_CONSOLE_IO - /* abort() may not be supported on some/all Windows CE platforms */ -# define PNG_ABORT() exit(-1) -# ifdef PNG_DEBUG -# undef PNG_DEBUG -# endif -#endif - -#ifdef PNG_BUILD_DLL -# ifndef PNG_CONSOLE_IO_SUPPORTED -# ifndef PNG_NO_CONSOLE_IO -# define PNG_NO_CONSOLE_IO -# endif -# endif -#endif - -# ifdef PNG_NO_STDIO -# ifndef PNG_NO_CONSOLE_IO -# define PNG_NO_CONSOLE_IO -# endif -# ifdef PNG_DEBUG -# if (PNG_DEBUG > 0) -# include <stdio.h> -# endif -# endif -# else -# if !defined(_WIN32_WCE) -/* "stdio.h" functions are not supported on WindowsCE */ -# include <stdio.h> -# endif -# endif - -/* This macro protects us against machines that don't have function - * prototypes (ie K&R style headers). If your compiler does not handle - * function prototypes, define this macro and use the included ansi2knr. - * I've always been able to use _NO_PROTO as the indicator, but you may - * need to drag the empty declaration out in front of here, or change the - * ifdef to suit your own needs. - */ -#ifndef PNGARG - -#ifdef OF /* zlib prototype munger */ -# define PNGARG(arglist) OF(arglist) -#else - -#ifdef _NO_PROTO -# define PNGARG(arglist) () -# ifndef PNG_TYPECAST_NULL -# define PNG_TYPECAST_NULL -# endif -#else -# define PNGARG(arglist) arglist -#endif /* _NO_PROTO */ - - -#endif /* OF */ - -#endif /* PNGARG */ - -/* Try to determine if we are compiling on a Mac. Note that testing for - * just __MWERKS__ is not good enough, because the Codewarrior is now used - * on non-Mac platforms. - */ -#ifndef MACOS -# if (defined(__MWERKS__) && defined(macintosh)) || defined(applec) || \ - defined(THINK_C) || defined(__SC__) || defined(TARGET_OS_MAC) -# define MACOS -# endif -#endif - -/* enough people need this for various reasons to include it here */ -#if !defined(MACOS) && !defined(RISCOS) && !defined(_WIN32_WCE) -# include <sys/types.h> -#endif - -#if !defined(PNG_SETJMP_NOT_SUPPORTED) && !defined(PNG_NO_SETJMP_SUPPORTED) -# define PNG_SETJMP_SUPPORTED -#endif - -#ifdef PNG_SETJMP_SUPPORTED -/* This is an attempt to force a single setjmp behaviour on Linux. If - * the X config stuff didn't define _BSD_SOURCE we wouldn't need this. - * - * You can bypass this test if you know that your application uses exactly - * the same setjmp.h that was included when libpng was built. Only define - * PNG_SKIP_SETJMP_CHECK while building your application, prior to the - * application's '#include "png.h"'. Don't define PNG_SKIP_SETJMP_CHECK - * while building a separate libpng library for general use. - */ - -# ifndef PNG_SKIP_SETJMP_CHECK -# ifdef __linux__ -# ifdef _BSD_SOURCE -# define PNG_SAVE_BSD_SOURCE -# undef _BSD_SOURCE -# endif -# ifdef _SETJMP_H - /* If you encounter a compiler error here, see the explanation - * near the end of INSTALL. - */ - __pngconf.h__ in libpng already includes setjmp.h; - __dont__ include it again.; -# endif -# endif /* __linux__ */ -# endif /* PNG_SKIP_SETJMP_CHECK */ - - /* include setjmp.h for error handling */ -# include <setjmp.h> - -# ifdef __linux__ -# ifdef PNG_SAVE_BSD_SOURCE -# ifndef _BSD_SOURCE -# define _BSD_SOURCE -# endif -# undef PNG_SAVE_BSD_SOURCE -# endif -# endif /* __linux__ */ -#endif /* PNG_SETJMP_SUPPORTED */ - -#ifdef BSD -# include <strings.h> -#else -# include <string.h> -#endif - -/* Other defines for things like memory and the like can go here. */ -#ifdef PNG_INTERNAL - -#include <stdlib.h> - -/* The functions exported by PNG_EXTERN are PNG_INTERNAL functions, which - * aren't usually used outside the library (as far as I know), so it is - * debatable if they should be exported at all. In the future, when it is - * possible to have run-time registry of chunk-handling functions, some of - * these will be made available again. -#define PNG_EXTERN extern - */ -#define PNG_EXTERN - -/* Other defines specific to compilers can go here. Try to keep - * them inside an appropriate ifdef/endif pair for portability. - */ - -#if defined(PNG_FLOATING_POINT_SUPPORTED) -# if defined(MACOS) - /* We need to check that <math.h> hasn't already been included earlier - * as it seems it doesn't agree with <fp.h>, yet we should really use - * <fp.h> if possible. - */ -# if !defined(__MATH_H__) && !defined(__MATH_H) && !defined(__cmath__) -# include <fp.h> -# endif -# else -# include <math.h> -# endif -# if defined(_AMIGA) && defined(__SASC) && defined(_M68881) - /* Amiga SAS/C: We must include builtin FPU functions when compiling using - * MATH=68881 - */ -# include <m68881.h> -# endif -#endif - -/* Codewarrior on NT has linking problems without this. */ -#if (defined(__MWERKS__) && defined(WIN32)) || defined(__STDC__) -# define PNG_ALWAYS_EXTERN -#endif - -/* This provides the non-ANSI (far) memory allocation routines. */ -#if defined(__TURBOC__) && defined(__MSDOS__) -# include <mem.h> -# include <alloc.h> -#endif - -/* I have no idea why is this necessary... */ -#if defined(_MSC_VER) && (defined(WIN32) || defined(_Windows) || \ - defined(_WINDOWS) || defined(_WIN32) || defined(__WIN32__)) -# include <malloc.h> -#endif - -/* This controls how fine the dithering gets. As this allocates - * a largish chunk of memory (32K), those who are not as concerned - * with dithering quality can decrease some or all of these. - */ -#ifndef PNG_DITHER_RED_BITS -# define PNG_DITHER_RED_BITS 5 -#endif -#ifndef PNG_DITHER_GREEN_BITS -# define PNG_DITHER_GREEN_BITS 5 -#endif -#ifndef PNG_DITHER_BLUE_BITS -# define PNG_DITHER_BLUE_BITS 5 -#endif - -/* This controls how fine the gamma correction becomes when you - * are only interested in 8 bits anyway. Increasing this value - * results in more memory being used, and more pow() functions - * being called to fill in the gamma tables. Don't set this value - * less then 8, and even that may not work (I haven't tested it). - */ - -#ifndef PNG_MAX_GAMMA_8 -# define PNG_MAX_GAMMA_8 11 -#endif - -/* This controls how much a difference in gamma we can tolerate before - * we actually start doing gamma conversion. - */ -#ifndef PNG_GAMMA_THRESHOLD -# define PNG_GAMMA_THRESHOLD 0.05 -#endif - -#endif /* PNG_INTERNAL */ - -/* The following uses const char * instead of char * for error - * and warning message functions, so some compilers won't complain. - * If you do not want to use const, define PNG_NO_CONST here. - */ - -#ifndef PNG_NO_CONST -# define PNG_CONST const -#else -# define PNG_CONST -#endif - -/* The following defines give you the ability to remove code from the - * library that you will not be using. I wish I could figure out how to - * automate this, but I can't do that without making it seriously hard - * on the users. So if you are not using an ability, change the #define - * to and #undef, and that part of the library will not be compiled. If - * your linker can't find a function, you may want to make sure the - * ability is defined here. Some of these depend upon some others being - * defined. I haven't figured out all the interactions here, so you may - * have to experiment awhile to get everything to compile. If you are - * creating or using a shared library, you probably shouldn't touch this, - * as it will affect the size of the structures, and this will cause bad - * things to happen if the library and/or application ever change. - */ - -/* Any features you will not be using can be undef'ed here */ - -/* GR-P, 0.96a: Set "*TRANSFORMS_SUPPORTED as default but allow user - * to turn it off with "*TRANSFORMS_NOT_SUPPORTED" or *PNG_NO_*_TRANSFORMS - * on the compile line, then pick and choose which ones to define without - * having to edit this file. It is safe to use the *TRANSFORMS_NOT_SUPPORTED - * if you only want to have a png-compliant reader/writer but don't need - * any of the extra transformations. This saves about 80 kbytes in a - * typical installation of the library. (PNG_NO_* form added in version - * 1.0.1c, for consistency) - */ - -/* The size of the png_text structure changed in libpng-1.0.6 when - * iTXt support was added. iTXt support was turned off by default through - * libpng-1.2.x, to support old apps that malloc the png_text structure - * instead of calling png_set_text() and letting libpng malloc it. It - * was turned on by default in libpng-1.3.0. - */ - -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -# ifndef PNG_NO_iTXt_SUPPORTED -# define PNG_NO_iTXt_SUPPORTED -# endif -# ifndef PNG_NO_READ_iTXt -# define PNG_NO_READ_iTXt -# endif -# ifndef PNG_NO_WRITE_iTXt -# define PNG_NO_WRITE_iTXt -# endif -#endif - -#if !defined(PNG_NO_iTXt_SUPPORTED) -# if !defined(PNG_READ_iTXt_SUPPORTED) && !defined(PNG_NO_READ_iTXt) -# define PNG_READ_iTXt -# endif -# if !defined(PNG_WRITE_iTXt_SUPPORTED) && !defined(PNG_NO_WRITE_iTXt) -# define PNG_WRITE_iTXt -# endif -#endif - -/* The following support, added after version 1.0.0, can be turned off here en - * masse by defining PNG_LEGACY_SUPPORTED in case you need binary compatibility - * with old applications that require the length of png_struct and png_info - * to remain unchanged. - */ - -#ifdef PNG_LEGACY_SUPPORTED -# define PNG_NO_FREE_ME -# define PNG_NO_READ_UNKNOWN_CHUNKS -# define PNG_NO_WRITE_UNKNOWN_CHUNKS -# define PNG_NO_READ_USER_CHUNKS -# define PNG_NO_READ_iCCP -# define PNG_NO_WRITE_iCCP -# define PNG_NO_READ_iTXt -# define PNG_NO_WRITE_iTXt -# define PNG_NO_READ_sCAL -# define PNG_NO_WRITE_sCAL -# define PNG_NO_READ_sPLT -# define PNG_NO_WRITE_sPLT -# define PNG_NO_INFO_IMAGE -# define PNG_NO_READ_RGB_TO_GRAY -# define PNG_NO_READ_USER_TRANSFORM -# define PNG_NO_WRITE_USER_TRANSFORM -# define PNG_NO_USER_MEM -# define PNG_NO_READ_EMPTY_PLTE -# define PNG_NO_MNG_FEATURES -# define PNG_NO_FIXED_POINT_SUPPORTED -#endif - -/* Ignore attempt to turn off both floating and fixed point support */ -#if !defined(PNG_FLOATING_POINT_SUPPORTED) || \ - !defined(PNG_NO_FIXED_POINT_SUPPORTED) -# define PNG_FIXED_POINT_SUPPORTED -#endif - -#ifndef PNG_NO_FREE_ME -# define PNG_FREE_ME_SUPPORTED -#endif - -#if defined(PNG_READ_SUPPORTED) - -#if !defined(PNG_READ_TRANSFORMS_NOT_SUPPORTED) && \ - !defined(PNG_NO_READ_TRANSFORMS) -# define PNG_READ_TRANSFORMS_SUPPORTED -#endif - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -# ifndef PNG_NO_READ_EXPAND -# define PNG_READ_EXPAND_SUPPORTED -# endif -# ifndef PNG_NO_READ_SHIFT -# define PNG_READ_SHIFT_SUPPORTED -# endif -# ifndef PNG_NO_READ_PACK -# define PNG_READ_PACK_SUPPORTED -# endif -# ifndef PNG_NO_READ_BGR -# define PNG_READ_BGR_SUPPORTED -# endif -# ifndef PNG_NO_READ_SWAP -# define PNG_READ_SWAP_SUPPORTED -# endif -# ifndef PNG_NO_READ_PACKSWAP -# define PNG_READ_PACKSWAP_SUPPORTED -# endif -# ifndef PNG_NO_READ_INVERT -# define PNG_READ_INVERT_SUPPORTED -# endif -# ifndef PNG_NO_READ_DITHER -# define PNG_READ_DITHER_SUPPORTED -# endif -# ifndef PNG_NO_READ_BACKGROUND -# define PNG_READ_BACKGROUND_SUPPORTED -# endif -# ifndef PNG_NO_READ_16_TO_8 -# define PNG_READ_16_TO_8_SUPPORTED -# endif -# ifndef PNG_NO_READ_FILLER -# define PNG_READ_FILLER_SUPPORTED -# endif -# ifndef PNG_NO_READ_GAMMA -# define PNG_READ_GAMMA_SUPPORTED -# endif -# ifndef PNG_NO_READ_GRAY_TO_RGB -# define PNG_READ_GRAY_TO_RGB_SUPPORTED -# endif -# ifndef PNG_NO_READ_SWAP_ALPHA -# define PNG_READ_SWAP_ALPHA_SUPPORTED -# endif -# ifndef PNG_NO_READ_INVERT_ALPHA -# define PNG_READ_INVERT_ALPHA_SUPPORTED -# endif -# ifndef PNG_NO_READ_STRIP_ALPHA -# define PNG_READ_STRIP_ALPHA_SUPPORTED -# endif -# ifndef PNG_NO_READ_USER_TRANSFORM -# define PNG_READ_USER_TRANSFORM_SUPPORTED -# endif -# ifndef PNG_NO_READ_RGB_TO_GRAY -# define PNG_READ_RGB_TO_GRAY_SUPPORTED -# endif -#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ - -#if !defined(PNG_NO_PROGRESSIVE_READ) && \ - !defined(PNG_PROGRESSIVE_READ_SUPPORTED) /* if you don't do progressive */ -# define PNG_PROGRESSIVE_READ_SUPPORTED /* reading. This is not talking */ -#endif /* about interlacing capability! You'll */ - /* still have interlacing unless you change the following line: */ - -#define PNG_READ_INTERLACING_SUPPORTED /* required in PNG-compliant decoders */ - -#ifndef PNG_NO_READ_COMPOSITE_NODIV -# ifndef PNG_NO_READ_COMPOSITED_NODIV /* libpng-1.0.x misspelling */ -# define PNG_READ_COMPOSITE_NODIV_SUPPORTED /* well tested on Intel, SGI */ -# endif -#endif - -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -/* Deprecated, will be removed from version 2.0.0. - Use PNG_MNG_FEATURES_SUPPORTED instead. */ -#ifndef PNG_NO_READ_EMPTY_PLTE -# define PNG_READ_EMPTY_PLTE_SUPPORTED -#endif -#endif - -#endif /* PNG_READ_SUPPORTED */ - -#if defined(PNG_WRITE_SUPPORTED) - -# if !defined(PNG_WRITE_TRANSFORMS_NOT_SUPPORTED) && \ - !defined(PNG_NO_WRITE_TRANSFORMS) -# define PNG_WRITE_TRANSFORMS_SUPPORTED -#endif - -#ifdef PNG_WRITE_TRANSFORMS_SUPPORTED -# ifndef PNG_NO_WRITE_SHIFT -# define PNG_WRITE_SHIFT_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_PACK -# define PNG_WRITE_PACK_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_BGR -# define PNG_WRITE_BGR_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_SWAP -# define PNG_WRITE_SWAP_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_PACKSWAP -# define PNG_WRITE_PACKSWAP_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_INVERT -# define PNG_WRITE_INVERT_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_FILLER -# define PNG_WRITE_FILLER_SUPPORTED /* same as WRITE_STRIP_ALPHA */ -# endif -# ifndef PNG_NO_WRITE_SWAP_ALPHA -# define PNG_WRITE_SWAP_ALPHA_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_INVERT_ALPHA -# define PNG_WRITE_INVERT_ALPHA_SUPPORTED -# endif -# ifndef PNG_NO_WRITE_USER_TRANSFORM -# define PNG_WRITE_USER_TRANSFORM_SUPPORTED -# endif -#endif /* PNG_WRITE_TRANSFORMS_SUPPORTED */ - -#if !defined(PNG_NO_WRITE_INTERLACING_SUPPORTED) && \ - !defined(PNG_WRITE_INTERLACING_SUPPORTED) -#define PNG_WRITE_INTERLACING_SUPPORTED /* not required for PNG-compliant - encoders, but can cause trouble - if left undefined */ -#endif - -#if !defined(PNG_NO_WRITE_WEIGHTED_FILTER) && \ - !defined(PNG_WRITE_WEIGHTED_FILTER) && \ - defined(PNG_FLOATING_POINT_SUPPORTED) -# define PNG_WRITE_WEIGHTED_FILTER_SUPPORTED -#endif - -#ifndef PNG_NO_WRITE_FLUSH -# define PNG_WRITE_FLUSH_SUPPORTED -#endif - -#if defined(PNG_1_0_X) || defined (PNG_1_2_X) -/* Deprecated, see PNG_MNG_FEATURES_SUPPORTED, above */ -#ifndef PNG_NO_WRITE_EMPTY_PLTE -# define PNG_WRITE_EMPTY_PLTE_SUPPORTED -#endif -#endif - -#endif /* PNG_WRITE_SUPPORTED */ - -#ifndef PNG_1_0_X -# ifndef PNG_NO_ERROR_NUMBERS -# define PNG_ERROR_NUMBERS_SUPPORTED -# endif -#endif /* PNG_1_0_X */ - -#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ - defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) -# ifndef PNG_NO_USER_TRANSFORM_PTR -# define PNG_USER_TRANSFORM_PTR_SUPPORTED -# endif -#endif - -#ifndef PNG_NO_STDIO -# define PNG_TIME_RFC1123_SUPPORTED -#endif - -/* This adds extra functions in pngget.c for accessing data from the - * info pointer (added in version 0.99) - * png_get_image_width() - * png_get_image_height() - * png_get_bit_depth() - * png_get_color_type() - * png_get_compression_type() - * png_get_filter_type() - * png_get_interlace_type() - * png_get_pixel_aspect_ratio() - * png_get_pixels_per_meter() - * png_get_x_offset_pixels() - * png_get_y_offset_pixels() - * png_get_x_offset_microns() - * png_get_y_offset_microns() - */ -#if !defined(PNG_NO_EASY_ACCESS) && !defined(PNG_EASY_ACCESS_SUPPORTED) -# define PNG_EASY_ACCESS_SUPPORTED -#endif - -/* PNG_ASSEMBLER_CODE was enabled by default in version 1.2.0 - * and removed from version 1.2.20. The following will be removed - * from libpng-1.4.0 -*/ - -#if defined(PNG_READ_SUPPORTED) && !defined(PNG_NO_OPTIMIZED_CODE) -# ifndef PNG_OPTIMIZED_CODE_SUPPORTED -# define PNG_OPTIMIZED_CODE_SUPPORTED -# endif -#endif - -#if defined(PNG_READ_SUPPORTED) && !defined(PNG_NO_ASSEMBLER_CODE) && defined(__i386__) -# ifndef PNG_ASSEMBLER_CODE_SUPPORTED -# define PNG_ASSEMBLER_CODE_SUPPORTED -# endif - -# if defined(__GNUC__) && defined(__x86_64__) && (__GNUC__ < 4) - /* work around 64-bit gcc compiler bugs in gcc-3.x */ -# if !defined(PNG_MMX_CODE_SUPPORTED) && !defined(PNG_NO_MMX_CODE) -# define PNG_NO_MMX_CODE -# endif -# endif - -# if defined(__APPLE__) -# if !defined(PNG_MMX_CODE_SUPPORTED) && !defined(PNG_NO_MMX_CODE) -# define PNG_NO_MMX_CODE -# endif -# endif - -# if (defined(__MWERKS__) && ((__MWERKS__ < 0x0900) || macintosh)) -# if !defined(PNG_MMX_CODE_SUPPORTED) && !defined(PNG_NO_MMX_CODE) -# define PNG_NO_MMX_CODE -# endif -# endif - -# if !defined(PNG_MMX_CODE_SUPPORTED) && !defined(PNG_NO_MMX_CODE) -# define PNG_MMX_CODE_SUPPORTED -# endif - -#endif -/* end of obsolete code to be removed from libpng-1.4.0 */ - -#if !defined(PNG_1_0_X) -#if !defined(PNG_NO_USER_MEM) && !defined(PNG_USER_MEM_SUPPORTED) -# define PNG_USER_MEM_SUPPORTED -#endif -#endif /* PNG_1_0_X */ - -/* Added at libpng-1.2.6 */ -#if !defined(PNG_1_0_X) -#ifndef PNG_SET_USER_LIMITS_SUPPORTED -#if !defined(PNG_NO_SET_USER_LIMITS) && !defined(PNG_SET_USER_LIMITS_SUPPORTED) -# define PNG_SET_USER_LIMITS_SUPPORTED -#endif -#endif -#endif /* PNG_1_0_X */ - -/* Added at libpng-1.0.16 and 1.2.6. To accept all valid PNGS no matter - * how large, set these limits to 0x7fffffffL - */ -#ifndef PNG_USER_WIDTH_MAX -# define PNG_USER_WIDTH_MAX 1000000L -#endif -#ifndef PNG_USER_HEIGHT_MAX -# define PNG_USER_HEIGHT_MAX 1000000L -#endif - -/* Added at libpng-1.2.34 and 1.4.0 */ -#ifndef PNG_STRING_NEWLINE -#define PNG_STRING_NEWLINE "\n" -#endif - -/* These are currently experimental features, define them if you want */ - -/* very little testing */ -/* -#ifdef PNG_READ_SUPPORTED -# ifndef PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED -# define PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED -# endif -#endif -*/ - -/* This is only for PowerPC big-endian and 680x0 systems */ -/* some testing */ -/* -#ifndef PNG_READ_BIG_ENDIAN_SUPPORTED -# define PNG_READ_BIG_ENDIAN_SUPPORTED -#endif -*/ - -/* Buggy compilers (e.g., gcc 2.7.2.2) need this */ -/* -#define PNG_NO_POINTER_INDEXING -*/ - -/* These functions are turned off by default, as they will be phased out. */ -/* -#define PNG_USELESS_TESTS_SUPPORTED -#define PNG_CORRECT_PALETTE_SUPPORTED -*/ - -/* Any chunks you are not interested in, you can undef here. The - * ones that allocate memory may be expecially important (hIST, - * tEXt, zTXt, tRNS, pCAL). Others will just save time and make png_info - * a bit smaller. - */ - -#if defined(PNG_READ_SUPPORTED) && \ - !defined(PNG_READ_ANCILLARY_CHUNKS_NOT_SUPPORTED) && \ - !defined(PNG_NO_READ_ANCILLARY_CHUNKS) -# define PNG_READ_ANCILLARY_CHUNKS_SUPPORTED -#endif - -#if defined(PNG_WRITE_SUPPORTED) && \ - !defined(PNG_WRITE_ANCILLARY_CHUNKS_NOT_SUPPORTED) && \ - !defined(PNG_NO_WRITE_ANCILLARY_CHUNKS) -# define PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED -#endif - -#ifdef PNG_READ_ANCILLARY_CHUNKS_SUPPORTED - -#ifdef PNG_NO_READ_TEXT -# define PNG_NO_READ_iTXt -# define PNG_NO_READ_tEXt -# define PNG_NO_READ_zTXt -#endif -#ifndef PNG_NO_READ_bKGD -# define PNG_READ_bKGD_SUPPORTED -# define PNG_bKGD_SUPPORTED -#endif -#ifndef PNG_NO_READ_cHRM -# define PNG_READ_cHRM_SUPPORTED -# define PNG_cHRM_SUPPORTED -#endif -#ifndef PNG_NO_READ_gAMA -# define PNG_READ_gAMA_SUPPORTED -# define PNG_gAMA_SUPPORTED -#endif -#ifndef PNG_NO_READ_hIST -# define PNG_READ_hIST_SUPPORTED -# define PNG_hIST_SUPPORTED -#endif -#ifndef PNG_NO_READ_iCCP -# define PNG_READ_iCCP_SUPPORTED -# define PNG_iCCP_SUPPORTED -#endif -#ifndef PNG_NO_READ_iTXt -# ifndef PNG_READ_iTXt_SUPPORTED -# define PNG_READ_iTXt_SUPPORTED -# endif -# ifndef PNG_iTXt_SUPPORTED -# define PNG_iTXt_SUPPORTED -# endif -#endif -#ifndef PNG_NO_READ_oFFs -# define PNG_READ_oFFs_SUPPORTED -# define PNG_oFFs_SUPPORTED -#endif -#ifndef PNG_NO_READ_pCAL -# define PNG_READ_pCAL_SUPPORTED -# define PNG_pCAL_SUPPORTED -#endif -#ifndef PNG_NO_READ_sCAL -# define PNG_READ_sCAL_SUPPORTED -# define PNG_sCAL_SUPPORTED -#endif -#ifndef PNG_NO_READ_pHYs -# define PNG_READ_pHYs_SUPPORTED -# define PNG_pHYs_SUPPORTED -#endif -#ifndef PNG_NO_READ_sBIT -# define PNG_READ_sBIT_SUPPORTED -# define PNG_sBIT_SUPPORTED -#endif -#ifndef PNG_NO_READ_sPLT -# define PNG_READ_sPLT_SUPPORTED -# define PNG_sPLT_SUPPORTED -#endif -#ifndef PNG_NO_READ_sRGB -# define PNG_READ_sRGB_SUPPORTED -# define PNG_sRGB_SUPPORTED -#endif -#ifndef PNG_NO_READ_tEXt -# define PNG_READ_tEXt_SUPPORTED -# define PNG_tEXt_SUPPORTED -#endif -#ifndef PNG_NO_READ_tIME -# define PNG_READ_tIME_SUPPORTED -# define PNG_tIME_SUPPORTED -#endif -#ifndef PNG_NO_READ_tRNS -# define PNG_READ_tRNS_SUPPORTED -# define PNG_tRNS_SUPPORTED -#endif -#ifndef PNG_NO_READ_zTXt -# define PNG_READ_zTXt_SUPPORTED -# define PNG_zTXt_SUPPORTED -#endif -#ifndef PNG_NO_READ_UNKNOWN_CHUNKS -# define PNG_READ_UNKNOWN_CHUNKS_SUPPORTED -# ifndef PNG_UNKNOWN_CHUNKS_SUPPORTED -# define PNG_UNKNOWN_CHUNKS_SUPPORTED -# endif -# ifndef PNG_NO_HANDLE_AS_UNKNOWN -# define PNG_HANDLE_AS_UNKNOWN_SUPPORTED -# endif -#endif -#if !defined(PNG_NO_READ_USER_CHUNKS) && \ - defined(PNG_READ_UNKNOWN_CHUNKS_SUPPORTED) -# define PNG_READ_USER_CHUNKS_SUPPORTED -# define PNG_USER_CHUNKS_SUPPORTED -# ifdef PNG_NO_READ_UNKNOWN_CHUNKS -# undef PNG_NO_READ_UNKNOWN_CHUNKS -# endif -# ifdef PNG_NO_HANDLE_AS_UNKNOWN -# undef PNG_NO_HANDLE_AS_UNKNOWN -# endif -#endif -#ifndef PNG_NO_READ_OPT_PLTE -# define PNG_READ_OPT_PLTE_SUPPORTED /* only affects support of the */ -#endif /* optional PLTE chunk in RGB and RGBA images */ -#if defined(PNG_READ_iTXt_SUPPORTED) || defined(PNG_READ_tEXt_SUPPORTED) || \ - defined(PNG_READ_zTXt_SUPPORTED) -# define PNG_READ_TEXT_SUPPORTED -# define PNG_TEXT_SUPPORTED -#endif - -#endif /* PNG_READ_ANCILLARY_CHUNKS_SUPPORTED */ - -#ifdef PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED - -#ifdef PNG_NO_WRITE_TEXT -# define PNG_NO_WRITE_iTXt -# define PNG_NO_WRITE_tEXt -# define PNG_NO_WRITE_zTXt -#endif -#ifndef PNG_NO_WRITE_bKGD -# define PNG_WRITE_bKGD_SUPPORTED -# ifndef PNG_bKGD_SUPPORTED -# define PNG_bKGD_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_cHRM -# define PNG_WRITE_cHRM_SUPPORTED -# ifndef PNG_cHRM_SUPPORTED -# define PNG_cHRM_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_gAMA -# define PNG_WRITE_gAMA_SUPPORTED -# ifndef PNG_gAMA_SUPPORTED -# define PNG_gAMA_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_hIST -# define PNG_WRITE_hIST_SUPPORTED -# ifndef PNG_hIST_SUPPORTED -# define PNG_hIST_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_iCCP -# define PNG_WRITE_iCCP_SUPPORTED -# ifndef PNG_iCCP_SUPPORTED -# define PNG_iCCP_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_iTXt -# ifndef PNG_WRITE_iTXt_SUPPORTED -# define PNG_WRITE_iTXt_SUPPORTED -# endif -# ifndef PNG_iTXt_SUPPORTED -# define PNG_iTXt_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_oFFs -# define PNG_WRITE_oFFs_SUPPORTED -# ifndef PNG_oFFs_SUPPORTED -# define PNG_oFFs_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_pCAL -# define PNG_WRITE_pCAL_SUPPORTED -# ifndef PNG_pCAL_SUPPORTED -# define PNG_pCAL_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_sCAL -# define PNG_WRITE_sCAL_SUPPORTED -# ifndef PNG_sCAL_SUPPORTED -# define PNG_sCAL_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_pHYs -# define PNG_WRITE_pHYs_SUPPORTED -# ifndef PNG_pHYs_SUPPORTED -# define PNG_pHYs_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_sBIT -# define PNG_WRITE_sBIT_SUPPORTED -# ifndef PNG_sBIT_SUPPORTED -# define PNG_sBIT_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_sPLT -# define PNG_WRITE_sPLT_SUPPORTED -# ifndef PNG_sPLT_SUPPORTED -# define PNG_sPLT_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_sRGB -# define PNG_WRITE_sRGB_SUPPORTED -# ifndef PNG_sRGB_SUPPORTED -# define PNG_sRGB_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_tEXt -# define PNG_WRITE_tEXt_SUPPORTED -# ifndef PNG_tEXt_SUPPORTED -# define PNG_tEXt_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_tIME -# define PNG_WRITE_tIME_SUPPORTED -# ifndef PNG_tIME_SUPPORTED -# define PNG_tIME_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_tRNS -# define PNG_WRITE_tRNS_SUPPORTED -# ifndef PNG_tRNS_SUPPORTED -# define PNG_tRNS_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_zTXt -# define PNG_WRITE_zTXt_SUPPORTED -# ifndef PNG_zTXt_SUPPORTED -# define PNG_zTXt_SUPPORTED -# endif -#endif -#ifndef PNG_NO_WRITE_UNKNOWN_CHUNKS -# define PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED -# ifndef PNG_UNKNOWN_CHUNKS_SUPPORTED -# define PNG_UNKNOWN_CHUNKS_SUPPORTED -# endif -# ifndef PNG_NO_HANDLE_AS_UNKNOWN -# ifndef PNG_HANDLE_AS_UNKNOWN_SUPPORTED -# define PNG_HANDLE_AS_UNKNOWN_SUPPORTED -# endif -# endif -#endif -#if defined(PNG_WRITE_iTXt_SUPPORTED) || defined(PNG_WRITE_tEXt_SUPPORTED) || \ - defined(PNG_WRITE_zTXt_SUPPORTED) -# define PNG_WRITE_TEXT_SUPPORTED -# ifndef PNG_TEXT_SUPPORTED -# define PNG_TEXT_SUPPORTED -# endif -#endif - -#endif /* PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED */ - -/* Turn this off to disable png_read_png() and - * png_write_png() and leave the row_pointers member - * out of the info structure. - */ -#ifndef PNG_NO_INFO_IMAGE -# define PNG_INFO_IMAGE_SUPPORTED -#endif - -/* need the time information for reading tIME chunks */ -#if defined(PNG_tIME_SUPPORTED) -# if !defined(_WIN32_WCE) - /* "time.h" functions are not supported on WindowsCE */ -# include <time.h> -# endif -#endif - -/* Some typedefs to get us started. These should be safe on most of the - * common platforms. The typedefs should be at least as large as the - * numbers suggest (a png_uint_32 must be at least 32 bits long), but they - * don't have to be exactly that size. Some compilers dislike passing - * unsigned shorts as function parameters, so you may be better off using - * unsigned int for png_uint_16. Likewise, for 64-bit systems, you may - * want to have unsigned int for png_uint_32 instead of unsigned long. - */ - -typedef unsigned long png_uint_32; -typedef long png_int_32; -typedef unsigned short png_uint_16; -typedef short png_int_16; -typedef unsigned char png_byte; - -/* This is usually size_t. It is typedef'ed just in case you need it to - change (I'm not sure if you will or not, so I thought I'd be safe) */ -#ifdef PNG_SIZE_T - typedef PNG_SIZE_T png_size_t; -# define png_sizeof(x) png_convert_size(sizeof(x)) -#else - typedef size_t png_size_t; -# define png_sizeof(x) sizeof(x) -#endif - -/* The following is needed for medium model support. It cannot be in the - * PNG_INTERNAL section. Needs modification for other compilers besides - * MSC. Model independent support declares all arrays and pointers to be - * large using the far keyword. The zlib version used must also support - * model independent data. As of version zlib 1.0.4, the necessary changes - * have been made in zlib. The USE_FAR_KEYWORD define triggers other - * changes that are needed. (Tim Wegner) - */ - -/* Separate compiler dependencies (problem here is that zlib.h always - defines FAR. (SJT) */ -#ifdef __BORLANDC__ -# if defined(__LARGE__) || defined(__HUGE__) || defined(__COMPACT__) -# define LDATA 1 -# else -# define LDATA 0 -# endif - /* GRR: why is Cygwin in here? Cygwin is not Borland C... */ -# if !defined(__WIN32__) && !defined(__FLAT__) && !defined(__CYGWIN__) -# define PNG_MAX_MALLOC_64K -# if (LDATA != 1) -# ifndef FAR -# define FAR __far -# endif -# define USE_FAR_KEYWORD -# endif /* LDATA != 1 */ - /* Possibly useful for moving data out of default segment. - * Uncomment it if you want. Could also define FARDATA as - * const if your compiler supports it. (SJT) -# define FARDATA FAR - */ -# endif /* __WIN32__, __FLAT__, __CYGWIN__ */ -#endif /* __BORLANDC__ */ - - -/* Suggest testing for specific compiler first before testing for - * FAR. The Watcom compiler defines both __MEDIUM__ and M_I86MM, - * making reliance oncertain keywords suspect. (SJT) - */ - -/* MSC Medium model */ -#if defined(FAR) -# if defined(M_I86MM) -# define USE_FAR_KEYWORD -# define FARDATA FAR -# include <dos.h> -# endif -#endif - -/* SJT: default case */ -#ifndef FAR -# define FAR -#endif - -/* At this point FAR is always defined */ -#ifndef FARDATA -# define FARDATA -#endif - -/* Typedef for floating-point numbers that are converted - to fixed-point with a multiple of 100,000, e.g., int_gamma */ -typedef png_int_32 png_fixed_point; - -/* Add typedefs for pointers */ -typedef void FAR * png_voidp; -typedef png_byte FAR * png_bytep; -typedef png_uint_32 FAR * png_uint_32p; -typedef png_int_32 FAR * png_int_32p; -typedef png_uint_16 FAR * png_uint_16p; -typedef png_int_16 FAR * png_int_16p; -typedef PNG_CONST char FAR * png_const_charp; -typedef char FAR * png_charp; -typedef png_fixed_point FAR * png_fixed_point_p; - -#ifndef PNG_NO_STDIO -#if defined(_WIN32_WCE) -typedef HANDLE png_FILE_p; -#else -typedef FILE * png_FILE_p; -#endif -#endif - -#ifdef PNG_FLOATING_POINT_SUPPORTED -typedef double FAR * png_doublep; -#endif - -/* Pointers to pointers; i.e. arrays */ -typedef png_byte FAR * FAR * png_bytepp; -typedef png_uint_32 FAR * FAR * png_uint_32pp; -typedef png_int_32 FAR * FAR * png_int_32pp; -typedef png_uint_16 FAR * FAR * png_uint_16pp; -typedef png_int_16 FAR * FAR * png_int_16pp; -typedef PNG_CONST char FAR * FAR * png_const_charpp; -typedef char FAR * FAR * png_charpp; -typedef png_fixed_point FAR * FAR * png_fixed_point_pp; -#ifdef PNG_FLOATING_POINT_SUPPORTED -typedef double FAR * FAR * png_doublepp; -#endif - -/* Pointers to pointers to pointers; i.e., pointer to array */ -typedef char FAR * FAR * FAR * png_charppp; - -#if defined(PNG_1_0_X) || defined(PNG_1_2_X) -/* SPC - Is this stuff deprecated? */ -/* It'll be removed as of libpng-1.3.0 - GR-P */ -/* libpng typedefs for types in zlib. If zlib changes - * or another compression library is used, then change these. - * Eliminates need to change all the source files. - */ -typedef charf * png_zcharp; -typedef charf * FAR * png_zcharpp; -typedef z_stream FAR * png_zstreamp; -#endif /* (PNG_1_0_X) || defined(PNG_1_2_X) */ - -/* - * Define PNG_BUILD_DLL if the module being built is a Windows - * LIBPNG DLL. - * - * Define PNG_USE_DLL if you want to *link* to the Windows LIBPNG DLL. - * It is equivalent to Microsoft predefined macro _DLL that is - * automatically defined when you compile using the share - * version of the CRT (C Run-Time library) - * - * The cygwin mods make this behavior a little different: - * Define PNG_BUILD_DLL if you are building a dll for use with cygwin - * Define PNG_STATIC if you are building a static library for use with cygwin, - * -or- if you are building an application that you want to link to the - * static library. - * PNG_USE_DLL is defined by default (no user action needed) unless one of - * the other flags is defined. - */ - -#if !defined(PNG_DLL) && (defined(PNG_BUILD_DLL) || defined(PNG_USE_DLL)) -# define PNG_DLL -#endif -/* If CYGWIN, then disallow GLOBAL ARRAYS unless building a static lib. - * When building a static lib, default to no GLOBAL ARRAYS, but allow - * command-line override - */ -#if defined(__CYGWIN__) -# if !defined(PNG_STATIC) -# if defined(PNG_USE_GLOBAL_ARRAYS) -# undef PNG_USE_GLOBAL_ARRAYS -# endif -# if !defined(PNG_USE_LOCAL_ARRAYS) -# define PNG_USE_LOCAL_ARRAYS -# endif -# else -# if defined(PNG_USE_LOCAL_ARRAYS) || defined(PNG_NO_GLOBAL_ARRAYS) -# if defined(PNG_USE_GLOBAL_ARRAYS) -# undef PNG_USE_GLOBAL_ARRAYS -# endif -# endif -# endif -# if !defined(PNG_USE_LOCAL_ARRAYS) && !defined(PNG_USE_GLOBAL_ARRAYS) -# define PNG_USE_LOCAL_ARRAYS -# endif -#endif - -/* Do not use global arrays (helps with building DLL's) - * They are no longer used in libpng itself, since version 1.0.5c, - * but might be required for some pre-1.0.5c applications. - */ -#if !defined(PNG_USE_LOCAL_ARRAYS) && !defined(PNG_USE_GLOBAL_ARRAYS) -# if defined(PNG_NO_GLOBAL_ARRAYS) || \ - (defined(__GNUC__) && defined(PNG_DLL)) || defined(_MSC_VER) -# define PNG_USE_LOCAL_ARRAYS -# else -# define PNG_USE_GLOBAL_ARRAYS -# endif -#endif - -#if defined(__CYGWIN__) -# undef PNGAPI -# define PNGAPI __cdecl -# undef PNG_IMPEXP -# define PNG_IMPEXP -#endif - -/* If you define PNGAPI, e.g., with compiler option "-DPNGAPI=__stdcall", - * you may get warnings regarding the linkage of png_zalloc and png_zfree. - * Don't ignore those warnings; you must also reset the default calling - * convention in your compiler to match your PNGAPI, and you must build - * zlib and your applications the same way you build libpng. - */ - -#if defined(__MINGW32__) && !defined(PNG_MODULEDEF) -# ifndef PNG_NO_MODULEDEF -# define PNG_NO_MODULEDEF -# endif -#endif - -#if !defined(PNG_IMPEXP) && defined(PNG_BUILD_DLL) && !defined(PNG_NO_MODULEDEF) -# define PNG_IMPEXP -#endif - -#if defined(PNG_DLL) || defined(_DLL) || defined(__DLL__ ) || \ - (( defined(_Windows) || defined(_WINDOWS) || \ - defined(WIN32) || defined(_WIN32) || defined(__WIN32__) )) - -# ifndef PNGAPI -# if defined(__GNUC__) || (defined (_MSC_VER) && (_MSC_VER >= 800)) -# define PNGAPI __cdecl -# else -# define PNGAPI _cdecl -# endif -# endif - -# if !defined(PNG_IMPEXP) && (!defined(PNG_DLL) || \ - 0 /* WINCOMPILER_WITH_NO_SUPPORT_FOR_DECLIMPEXP */) -# define PNG_IMPEXP -# endif - -# if !defined(PNG_IMPEXP) - -# define PNG_EXPORT_TYPE1(type,symbol) PNG_IMPEXP type PNGAPI symbol -# define PNG_EXPORT_TYPE2(type,symbol) type PNG_IMPEXP PNGAPI symbol - - /* Borland/Microsoft */ -# if defined(_MSC_VER) || defined(__BORLANDC__) -# if (_MSC_VER >= 800) || (__BORLANDC__ >= 0x500) -# define PNG_EXPORT PNG_EXPORT_TYPE1 -# else -# define PNG_EXPORT PNG_EXPORT_TYPE2 -# if defined(PNG_BUILD_DLL) -# define PNG_IMPEXP __export -# else -# define PNG_IMPEXP /*__import */ /* doesn't exist AFAIK in - VC++ */ -# endif /* Exists in Borland C++ for - C++ classes (== huge) */ -# endif -# endif - -# if !defined(PNG_IMPEXP) -# if defined(PNG_BUILD_DLL) -# define PNG_IMPEXP __declspec(dllexport) -# else -# define PNG_IMPEXP __declspec(dllimport) -# endif -# endif -# endif /* PNG_IMPEXP */ -#else /* !(DLL || non-cygwin WINDOWS) */ -# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) -# ifndef PNGAPI -# define PNGAPI _System -# endif -# else -# if 0 /* ... other platforms, with other meanings */ -# endif -# endif -#endif - -#ifndef PNGAPI -# define PNGAPI -#endif -#ifndef PNG_IMPEXP -# define PNG_IMPEXP -#endif - -#ifdef PNG_BUILDSYMS -# ifndef PNG_EXPORT -# define PNG_EXPORT(type,symbol) PNG_FUNCTION_EXPORT symbol END -# endif -# ifdef PNG_USE_GLOBAL_ARRAYS -# ifndef PNG_EXPORT_VAR -# define PNG_EXPORT_VAR(type) PNG_DATA_EXPORT -# endif -# endif -#endif - -#ifndef PNG_EXPORT -# define PNG_EXPORT(type,symbol) PNG_IMPEXP type PNGAPI symbol -#endif - -#ifdef PNG_USE_GLOBAL_ARRAYS -# ifndef PNG_EXPORT_VAR -# define PNG_EXPORT_VAR(type) extern PNG_IMPEXP type -# endif -#endif - -/* User may want to use these so they are not in PNG_INTERNAL. Any library - * functions that are passed far data must be model independent. - */ - -#ifndef PNG_ABORT -# define PNG_ABORT() abort() -#endif - -#ifdef PNG_SETJMP_SUPPORTED -# define png_jmpbuf(png_ptr) ((png_ptr)->jmpbuf) -#else -# define png_jmpbuf(png_ptr) \ - (LIBPNG_WAS_COMPILED_WITH__PNG_SETJMP_NOT_SUPPORTED) -#endif - -#if defined(USE_FAR_KEYWORD) /* memory model independent fns */ -/* use this to make far-to-near assignments */ -# define CHECK 1 -# define NOCHECK 0 -# define CVT_PTR(ptr) (png_far_to_near(png_ptr,ptr,CHECK)) -# define CVT_PTR_NOCHECK(ptr) (png_far_to_near(png_ptr,ptr,NOCHECK)) -# define png_snprintf _fsnprintf /* Added to v 1.2.19 */ -# define png_strlen _fstrlen -# define png_memcmp _fmemcmp /* SJT: added */ -# define png_memcpy _fmemcpy -# define png_memset _fmemset -#else /* use the usual functions */ -# define CVT_PTR(ptr) (ptr) -# define CVT_PTR_NOCHECK(ptr) (ptr) -# ifndef PNG_NO_SNPRINTF -# ifdef _MSC_VER -# define png_snprintf _snprintf /* Added to v 1.2.19 */ -# define png_snprintf2 _snprintf -# define png_snprintf6 _snprintf -# else -# define png_snprintf snprintf /* Added to v 1.2.19 */ -# define png_snprintf2 snprintf -# define png_snprintf6 snprintf -# endif -# else - /* You don't have or don't want to use snprintf(). Caution: Using - * sprintf instead of snprintf exposes your application to accidental - * or malevolent buffer overflows. If you don't have snprintf() - * as a general rule you should provide one (you can get one from - * Portable OpenSSH). */ -# define png_snprintf(s1,n,fmt,x1) sprintf(s1,fmt,x1) -# define png_snprintf2(s1,n,fmt,x1,x2) sprintf(s1,fmt,x1,x2) -# define png_snprintf6(s1,n,fmt,x1,x2,x3,x4,x5,x6) \ - sprintf(s1,fmt,x1,x2,x3,x4,x5,x6) -# endif -# define png_strlen strlen -# define png_memcmp memcmp /* SJT: added */ -# define png_memcpy memcpy -# define png_memset memset -#endif -/* End of memory model independent support */ - -/* Just a little check that someone hasn't tried to define something - * contradictory. - */ -#if (PNG_ZBUF_SIZE > 65536L) && defined(PNG_MAX_MALLOC_64K) -# undef PNG_ZBUF_SIZE -# define PNG_ZBUF_SIZE 65536L -#endif - -/* Added at libpng-1.2.8 */ -#endif /* PNG_VERSION_INFO_ONLY */ - -#endif /* PNGCONF_H */ diff --git a/include/zconf.h b/include/zconf.h deleted file mode 100644 index 9987a775..00000000 --- a/include/zconf.h +++ /dev/null @@ -1,511 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2013 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef ZCONF_H -#define ZCONF_H - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ -# define Z_PREFIX_SET - -/* all linked symbols */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_bits z__tr_flush_bits -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# ifndef Z_SOLO -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# endif -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePending z_deflatePending -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateResetKeep z_deflateResetKeep -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# ifndef Z_SOLO -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzgetc z_gzgetc -# define gzgetc_ z_gzgetc_ -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# ifdef _WIN32 -# define gzopen_w z_gzopen_w -# endif -# define gzprintf z_gzprintf -# define gzvprintf z_gzvprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzwrite z_gzwrite -# endif -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetHeader z_inflateGetHeader -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateSetDictionary z_inflateSetDictionary -# define inflateGetDictionary z_inflateGetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflateResetKeep z_inflateResetKeep -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# ifndef Z_SOLO -# define uncompress z_uncompress -# endif -# define zError z_zError -# ifndef Z_SOLO -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# endif -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# ifndef Z_SOLO -# define gzFile z_gzFile -# endif -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# define gz_header_s z_gz_header_s -# define internal_state z_internal_state - -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif - -#if defined(ZLIB_CONST) && !defined(z_const) -# define z_const const -#else -# define z_const -#endif - -/* Some Mac compilers merge all .h files incorrectly: */ -#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) -# define NO_DUMMY_DECL -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -#ifndef Z_ARG /* function prototypes for stdarg */ -# if defined(STDC) || defined(Z_HAVE_STDARG_H) -# define Z_ARG(args) args -# else -# define Z_ARG(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include <windows.h> - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) -typedef unsigned char Byte; /* 8 bits */ -#endif -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) -# include <limits.h> -# if (UINT_MAX == 0xffffffffUL) -# define Z_U4 unsigned -# elif (ULONG_MAX == 0xffffffffUL) -# define Z_U4 unsigned long -# elif (USHRT_MAX == 0xffffffffUL) -# define Z_U4 unsigned short -# endif -#endif - -#ifdef Z_U4 - typedef Z_U4 z_crc_t; -#else - typedef unsigned long z_crc_t; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_STDARG_H -#endif - -#ifdef STDC -# ifndef Z_SOLO -# include <sys/types.h> /* for off_t */ -# endif -#endif - -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -# include <stdarg.h> /* for va_list */ -# endif -#endif - -#ifdef _WIN32 -# ifndef Z_SOLO -# include <stddef.h> /* for wchar_t */ -# endif -#endif - -/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and - * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even - * though the former does not conform to the LFS document), but considering - * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as - * equivalently requesting no 64-bit operations - */ -#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 -# undef _LARGEFILE64_SOURCE -#endif - -#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) -# define Z_HAVE_UNISTD_H -#endif -#ifndef Z_SOLO -# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ -# ifdef VMS -# include <unixio.h> /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -# endif -#endif - -#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 -# define Z_LFS64 -#endif - -#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) -# define Z_LARGE64 -#endif - -#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) -# define Z_WANT64 -#endif - -#if !defined(SEEK_SET) && !defined(Z_SOLO) -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#ifndef z_off_t -# define z_off_t long -#endif - -#if !defined(_WIN32) && defined(Z_LARGE64) -# define z_off64_t off64_t -#else -# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) -# define z_off64_t __int64 -# else -# define z_off64_t z_off_t -# endif -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") -#endif - -#endif /* ZCONF_H */ diff --git a/include/zlib.h b/include/zlib.h deleted file mode 100644 index 3e0c7672..00000000 --- a/include/zlib.h +++ /dev/null @@ -1,1768 +0,0 @@ -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.8, April 28th, 2013 - - Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 - (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). -*/ - -#ifndef ZLIB_H -#define ZLIB_H - -#include "zconf.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define ZLIB_VERSION "1.2.8" -#define ZLIB_VERNUM 0x1280 -#define ZLIB_VER_MAJOR 1 -#define ZLIB_VER_MINOR 2 -#define ZLIB_VER_REVISION 8 -#define ZLIB_VER_SUBREVISION 0 - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed data. - This version of the library supports only one compression method (deflation) - but other algorithms will be added later and will have the same stream - interface. - - Compression can be done in a single step if the buffers are large enough, - or can be done by repeated calls of the compression function. In the latter - case, the application must provide more input and/or consume the output - (providing more output space) before each call. - - The compressed data format used by default by the in-memory functions is - the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped - around a deflate stream, which is itself documented in RFC 1951. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio using the functions that start - with "gz". The gzip format is different from the zlib format. gzip is a - gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - - This library can optionally read and write gzip streams in memory as well. - - The zlib format was designed to be compact and fast for use in memory - and on communications channels. The gzip format was designed for single- - file compression on file systems, has a larger header than zlib to maintain - directory information, and uses a different, slower check method than zlib. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never crash - even in case of corrupted input. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address)); - -struct internal_state; - -typedef struct z_stream_s { - z_const Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total number of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total number of bytes output so far */ - - z_const char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: binary or text */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream FAR *z_streamp; - -/* - gzip header information passed to and from zlib routines. See RFC 1952 - for more details on the meanings of these fields. -*/ -typedef struct gz_header_s { - int text; /* true if compressed data believed to be text */ - uLong time; /* modification time */ - int xflags; /* extra flags (not used when writing a gzip file) */ - int os; /* operating system */ - Bytef *extra; /* pointer to extra field or Z_NULL if none */ - uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ - uInt extra_max; /* space at extra (only when reading header) */ - Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ - uInt name_max; /* space at name (only when reading header) */ - Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ - uInt comm_max; /* space at comment (only when reading header) */ - int hcrc; /* true if there was or will be a header crc */ - int done; /* true when done reading gzip header (not used - when writing a gzip file) */ -} gz_header; - -typedef gz_header FAR *gz_headerp; - -/* - The application must update next_in and avail_in when avail_in has dropped - to zero. It must update next_out and avail_out when avail_out has dropped - to zero. The application must initialize zalloc, zfree and opaque before - calling the init function. All other fields are set by the compression - library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this if - the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers - returned by zalloc for objects of exactly 65536 bytes *must* have their - offset normalized to zero. The default allocation function provided by this - library ensures this (see zutil.c). To reduce memory requirements and avoid - any allocation of 64K objects, at the expense of compression ratio, compile - the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or progress - reports. After compression, total_in holds the total size of the - uncompressed data and may be saved for use in the decompressor (particularly - if the decompressor wants to decompress everything in a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -#define Z_BLOCK 5 -#define Z_TREES 6 -/* Allowed flush values; see deflate() and inflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative values - * are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_RLE 3 -#define Z_FIXED 4 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_TEXT 1 -#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ -#define Z_UNKNOWN 2 -/* Possible values of the data_type field (though see inflate()) */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - - /* basic functions */ - -ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is not - compatible with the zlib.h header file used by the application. This check - is automatically made by deflateInit and inflateInit. - */ - -/* -ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. If - zalloc and zfree are set to Z_NULL, deflateInit updates them to use default - allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at all - (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION - requests a default compromise between speed and compression (currently - equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if level is not a valid compression level, or - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). msg is set to null - if there is no error message. deflateInit does not perform any compression: - this will be done by deflate(). -*/ - - -ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). Some - output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating avail_in or avail_out accordingly; avail_out should - never be zero before the call. The application can consume the compressed - output when it wants, for example when the output buffer is full (avail_out - == 0), or after each call of deflate(). If deflate returns Z_OK and with - zero avail_out, it must be called again after making room in the output - buffer because there might be more output pending. - - Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to - decide how much data to accumulate before producing output, in order to - maximize compression. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In - particular avail_in is zero after the call if enough output space has been - provided before the call.) Flushing may degrade compression for some - compression algorithms and so it should be used only when necessary. This - completes the current deflate block and follows it with an empty stored block - that is three bits plus filler bits to the next byte, followed by four bytes - (00 00 ff ff). - - If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the - output buffer, but the output is not aligned to a byte boundary. All of the - input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. - This completes the current deflate block and follows it with an empty fixed - codes block that is 10 bits long. This assures that enough bytes are output - in order for the decompressor to finish the block before the empty fixed code - block. - - If flush is set to Z_BLOCK, a deflate block is completed and emitted, as - for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to - seven bits of the current block are held to be written as the next byte after - the next deflate block is completed. In this case, the decompressor may not - be provided enough bits at this point in order to complete decompression of - the data provided so far to the compressor. It may need to wait for the next - block to be emitted. This is for advanced applications that need to control - the emission of deflate blocks. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that - avail_out is greater than six to avoid repeated flush markers due to - avail_out == 0 on return. - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there was - enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the stream - are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least the - value returned by deflateBound (see below). Then deflate is guaranteed to - return Z_STREAM_END. If not enough output space is provided, deflate will - not return Z_STREAM_END, and it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so far (that is, total_in bytes). - - deflate() may update strm->data_type if it can make a good guess about - the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered - binary. This field is only for information purposes and does not affect the - compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not - fatal, and deflate() can be called again with more input and more output - space to continue compressing. -*/ - - -ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, msg - may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the - exact value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit() does not process any header information -- that is deferred - until inflate() is called. -*/ - - -ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing will - resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there is - no more input data or no more space in the output buffer (see below about - the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating the next_* and avail_* values accordingly. The - application can consume the uncompressed output when it wants, for example - when the output buffer is full (avail_out == 0), or after each call of - inflate(). If inflate returns Z_OK and with zero avail_out, it must be - called again after making room in the output buffer because there might be - more output pending. - - The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, - Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much - output as possible to the output buffer. Z_BLOCK requests that inflate() - stop if and when it gets to the next deflate block boundary. When decoding - the zlib or gzip format, this will cause inflate() to return immediately - after the header and before the first block. When doing a raw inflate, - inflate() will go ahead and process the first block, and will return when it - gets to the end of that block, or when it runs out of data. - - The Z_BLOCK option assists in appending to or combining deflate streams. - Also to assist in this, on return inflate() will set strm->data_type to the - number of unused bits in the last byte taken from strm->next_in, plus 64 if - inflate() is currently decoding the last block in the deflate stream, plus - 128 if inflate() returned immediately after decoding an end-of-block code or - decoding the complete header up to just before the first byte of the deflate - stream. The end-of-block will not be indicated until all of the uncompressed - data from that block has been written to strm->next_out. The number of - unused bits may in general be greater than seven, except when bit 7 of - data_type is set, in which case the number of unused bits will be less than - eight. data_type is set as noted here every time inflate() returns for all - flush options, and so can be used to determine the amount of currently - consumed input in bits. - - The Z_TREES option behaves as Z_BLOCK does, but it also returns when the - end of each deflate block header is reached, before any actual data in that - block is decoded. This allows the caller to determine the length of the - deflate block header for later use in random access within a deflate block. - 256 is added to the value of strm->data_type when inflate() returns - immediately after reaching the end of the deflate block header. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step (a - single call of inflate), the parameter flush should be set to Z_FINISH. In - this case all pending input is processed and all pending output is flushed; - avail_out must be large enough to hold all of the uncompressed data for the - operation to complete. (The size of the uncompressed data may have been - saved by the compressor for this purpose.) The use of Z_FINISH is not - required to perform an inflation in one step. However it may be used to - inform inflate that a faster approach can be used for the single inflate() - call. Z_FINISH also informs inflate to not maintain a sliding window if the - stream completes, which reduces inflate's memory footprint. If the stream - does not complete, either because not all of the stream is provided or not - enough output space is provided, then a sliding window will be allocated and - inflate() can be called again to continue the operation as if Z_NO_FLUSH had - been used. - - In this implementation, inflate() always flushes as much output as - possible to the output buffer, and always uses the faster approach on the - first call. So the effects of the flush parameter in this implementation are - on the return value of inflate() as noted below, when inflate() returns early - when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of - memory for a sliding window when Z_FINISH is used. - - If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the Adler-32 checksum of the dictionary - chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the Adler-32 checksum of all output produced so far (that is, - total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described - below. At the end of the stream, inflate() checks that its computed adler32 - checksum is equal to that saved by the compressor and returns Z_STREAM_END - only if the checksum is correct. - - inflate() can decompress and check either zlib-wrapped or gzip-wrapped - deflate data. The header type is detected automatically, if requested when - initializing with inflateInit2(). Any information contained in the gzip - header is not retained, so applications that need that information should - instead use raw inflate, see inflateInit2() below, or inflateBack() and - perform their own processing of the gzip header and trailer. When processing - gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output - producted so far. The CRC-32 is checked against the gzip trailer. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect check - value), Z_STREAM_ERROR if the stream structure was inconsistent (for example - next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in the - output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and - inflate() can be called again with more input and more output space to - continue decompressing. If Z_DATA_ERROR is returned, the application may - then call inflateSync() to look for a good compression block if a partial - recovery of the data is desired. -*/ - - -ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by the - caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - windowBits can also be -8..-15 for raw deflate. In this case, -windowBits - determines the window size. deflate() will then generate raw deflate data - with no zlib header or trailer, and will not compute an adler32 check value. - - windowBits can also be greater than 15 for optional gzip encoding. Add - 16 to windowBits to write a simple gzip header and trailer around the - compressed data instead of a zlib wrapper. The gzip header will have no - file name, no extra data, no comment, no modification time (set to zero), no - header crc, and the operating system will be set to 255 (unknown). If a - gzip stream is being written, strm->adler is a crc32 instead of an adler32. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but is - slow and reduces compression ratio; memLevel=9 uses maximum memory for - optimal speed. The default value is 8. See zconf.h for total memory usage - as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match), or Z_RLE to limit match distances to one (run-length - encoding). Filtered data consists mostly of small values with a somewhat - random distribution. In this case, the compression algorithm is tuned to - compress them better. The effect of Z_FILTERED is to force more Huffman - coding and less string matching; it is somewhat intermediate between - Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as - fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The - strategy parameter only affects the compression ratio but not the - correctness of the compressed output even if it is not set appropriately. - Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler - decoder for special applications. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid - method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is - incompatible with the version assumed by the caller (ZLIB_VERSION). msg is - set to null if there is no error message. deflateInit2 does not perform any - compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. When using the zlib format, this - function must be called immediately after deflateInit, deflateInit2 or - deflateReset, and before any call of deflate. When doing raw deflate, this - function must be called either before any call of deflate, or immediately - after the completion of a deflate block, i.e. after all input has been - consumed and all output has been delivered when using any of the flush - options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The - compressor and decompressor must use exactly the same dictionary (see - inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size - provided in deflateInit or deflateInit2. Thus the strings most likely to be - useful should be put at the end of the dictionary, not at the front. In - addition, the current implementation of deflate will use at most the window - size minus 262 bytes of the provided dictionary. - - Upon return of this function, strm->adler is set to the adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) If a raw deflate was requested, then the - adler32 value is not computed and strm->adler is not set. - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if not at a block boundary for raw deflate). deflateSetDictionary does - not perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and can - consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. The - stream will keep the same compression level and any other attributes that - may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, - int level, - int strategy)); -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different strategy. - If the compression level is changed, the input available so far is - compressed with the old level (and may be flushed); the new level will take - effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to be - compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if - strm->avail_out was zero. -*/ - -ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, - int good_length, - int max_lazy, - int nice_length, - int max_chain)); -/* - Fine tune deflate's internal compression parameters. This should only be - used by someone who understands the algorithm used by zlib's deflate for - searching for the best matching string, and even then only by the most - fanatic optimizer trying to squeeze out the last compressed bit for their - specific input data. Read the deflate.c source code for the meaning of the - max_lazy, good_length, nice_length, and max_chain parameters. - - deflateTune() can be called after deflateInit() or deflateInit2(), and - returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. - */ - -ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, - uLong sourceLen)); -/* - deflateBound() returns an upper bound on the compressed size after - deflation of sourceLen bytes. It must be called after deflateInit() or - deflateInit2(), and after deflateSetHeader(), if used. This would be used - to allocate an output buffer for deflation in a single pass, and so would be - called before deflate(). If that first deflate() call is provided the - sourceLen input bytes, an output buffer allocated to the size returned by - deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed - to return Z_STREAM_END. Note that it is possible for the compressed size to - be larger than the value returned by deflateBound() if flush options other - than Z_FINISH or Z_NO_FLUSH are used. -*/ - -ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, - unsigned *pending, - int *bits)); -/* - deflatePending() returns the number of bytes and bits of output that have - been generated, but not yet provided in the available output. The bytes not - provided would be due to the available output space having being consumed. - The number of bits of output not provided are between 0 and 7, where they - await more bits to join them in order to fill out a full byte. If pending - or bits are Z_NULL, then those values are not set. - - deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. - */ - -ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - deflatePrime() inserts bits in the deflate output stream. The intent - is that this function is used to start off the deflate output with the bits - leftover from a previous deflate stream when appending to it. As such, this - function can only be used for raw deflate, and must be used before the first - deflate() call after a deflateInit2() or deflateReset(). bits must be less - than or equal to 16, and that many of the least significant bits of value - will be inserted in the output. - - deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough - room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the - source stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, - gz_headerp head)); -/* - deflateSetHeader() provides gzip header information for when a gzip - stream is requested by deflateInit2(). deflateSetHeader() may be called - after deflateInit2() or deflateReset() and before the first call of - deflate(). The text, time, os, extra field, name, and comment information - in the provided gz_header structure are written to the gzip header (xflag is - ignored -- the extra flags are set according to the compression level). The - caller must assure that, if not Z_NULL, name and comment are terminated with - a zero byte, and that if extra is not Z_NULL, that extra_len bytes are - available there. If hcrc is true, a gzip header crc is included. Note that - the current versions of the command-line version of gzip (up through version - 1.3.x) do not support header crc's, and will report that it is a "multi-part - gzip file" and give up. - - If deflateSetHeader is not used, the default gzip header has text false, - the time set to zero, and os set to 255, with no extra, name, or comment - fields. The gzip header is returned to the default state by deflateReset(). - - deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. windowBits must be greater than or equal to the windowBits value - provided to deflateInit2() while compressing, or it must be equal to 15 if - deflateInit2() was not used. If a compressed stream with a larger window - size is given as input, inflate() will return with the error code - Z_DATA_ERROR instead of trying to allocate a larger window. - - windowBits can also be zero to request that inflate use the window size in - the zlib header of the compressed stream. - - windowBits can also be -8..-15 for raw inflate. In this case, -windowBits - determines the window size. inflate() will then process raw deflate data, - not looking for a zlib or gzip header, not generating a check value, and not - looking for any check values for comparison at the end of the stream. This - is for use with other formats that use the deflate compressed data format - such as zip. Those formats provide their own check values. If a custom - format is developed using the raw deflate format for compressed data, it is - recommended that a check value such as an adler32 or a crc32 be applied to - the uncompressed data as is done in the zlib, gzip, and zip formats. For - most applications, the zlib format should be used as is. Note that comments - above on the use in deflateInit2() applies to the magnitude of windowBits. - - windowBits can also be greater than 15 for optional gzip decoding. Add - 32 to windowBits to enable zlib and gzip decoding with automatic header - detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a - crc32 instead of an adler32. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit2 does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit2() does not process any header information -- that is - deferred until inflate() is called. -*/ - -ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate, - if that call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by that call of inflate. - The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called at any - time to set the dictionary. If the provided dictionary is smaller than the - window and there is already data in the window, then the provided dictionary - will amend what's there. The application must insure that the dictionary - that was used for compression is provided. - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, - Bytef *dictionary, - uInt *dictLength)); -/* - Returns the sliding dictionary being maintained by inflate. dictLength is - set to the number of bytes in the dictionary, and that many bytes are copied - to dictionary. dictionary must have enough space, where 32768 bytes is - always enough. If inflateGetDictionary() is called with dictionary equal to - Z_NULL, then only the dictionary length is returned, and nothing is copied. - Similary, if dictLength is Z_NULL, then it is not set. - - inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the - stream state is inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a possible full flush point (see above - for the description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync searches for a 00 00 FF FF pattern in the compressed data. - All full flush points have this pattern, but not all occurrences of this - pattern are full flush points. - - inflateSync returns Z_OK if a possible full flush point has been found, - Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point - has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. - In the success case, the application may save the current current value of - total_in which indicates where valid compressed data was found. In the - error case, the application may repeatedly call inflateSync, providing more - input each time, until success or end of the input data. -*/ - -ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when randomly accessing a large stream. The - first pass through the stream can periodically record the inflate state, - allowing restarting inflate at those points when randomly accessing the - stream. - - inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. The - stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, - int windowBits)); -/* - This function is the same as inflateReset, but it also permits changing - the wrap and window size requests. The windowBits parameter is interpreted - the same as it is for inflateInit2. - - inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL), or if - the windowBits parameter is invalid. -*/ - -ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - This function inserts bits in the inflate input stream. The intent is - that this function is used to start inflating at a bit position in the - middle of a byte. The provided bits will be used before any bytes are used - from next_in. This function should only be used with raw inflate, and - should be used before the first inflate() call after inflateInit2() or - inflateReset(). bits must be less than or equal to 16, and that many of the - least significant bits of value will be inserted in the input. - - If bits is negative, then the input stream bit buffer is emptied. Then - inflatePrime() can be called again to put bits in the buffer. This is used - to clear out bits leftover after feeding inflate a block description prior - to feeding inflate codes. - - inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); -/* - This function returns two values, one in the lower 16 bits of the return - value, and the other in the remaining upper bits, obtained by shifting the - return value down 16 bits. If the upper value is -1 and the lower value is - zero, then inflate() is currently decoding information outside of a block. - If the upper value is -1 and the lower value is non-zero, then inflate is in - the middle of a stored block, with the lower value equaling the number of - bytes from the input remaining to copy. If the upper value is not -1, then - it is the number of bits back from the current bit position in the input of - the code (literal or length/distance pair) currently being processed. In - that case the lower value is the number of bytes already emitted for that - code. - - A code is being processed if inflate is waiting for more input to complete - decoding of the code, or if it has completed decoding but is waiting for - more output space to write the literal or match data. - - inflateMark() is used to mark locations in the input data for random - access, which may be at bit positions, and to note those cases where the - output of a code may span boundaries of random access blocks. The current - location in the input stream can be determined from avail_in and data_type - as noted in the description for the Z_BLOCK flush parameter for inflate. - - inflateMark returns the value noted above or -1 << 16 if the provided - source stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, - gz_headerp head)); -/* - inflateGetHeader() requests that gzip header information be stored in the - provided gz_header structure. inflateGetHeader() may be called after - inflateInit2() or inflateReset(), and before the first call of inflate(). - As inflate() processes the gzip stream, head->done is zero until the header - is completed, at which time head->done is set to one. If a zlib stream is - being decoded, then head->done is set to -1 to indicate that there will be - no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be - used to force inflate() to return immediately after header processing is - complete and before any actual data is decompressed. - - The text, time, xflags, and os fields are filled in with the gzip header - contents. hcrc is set to true if there is a header CRC. (The header CRC - was valid if done is set to one.) If extra is not Z_NULL, then extra_max - contains the maximum number of bytes to write to extra. Once done is true, - extra_len contains the actual extra field length, and extra contains the - extra field, or that field truncated if extra_max is less than extra_len. - If name is not Z_NULL, then up to name_max characters are written there, - terminated with a zero unless the length is greater than name_max. If - comment is not Z_NULL, then up to comm_max characters are written there, - terminated with a zero unless the length is greater than comm_max. When any - of extra, name, or comment are not Z_NULL and the respective field is not - present in the header, then that field is set to Z_NULL to signal its - absence. This allows the use of deflateSetHeader() with the returned - structure to duplicate the header. However if those fields are set to - allocated memory, then the application will need to save those pointers - elsewhere so that they can be eventually freed. - - If inflateGetHeader is not used, then the header information is simply - discarded. The header is always checked for validity, including the header - CRC if present. inflateReset() will reset the process to discard the header - information. The application would need to call inflateGetHeader() again to - retrieve the header from the next gzip stream. - - inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, - unsigned char FAR *window)); - - Initialize the internal stream state for decompression using inflateBack() - calls. The fields zalloc, zfree and opaque in strm must be initialized - before the call. If zalloc and zfree are Z_NULL, then the default library- - derived memory allocation routines are used. windowBits is the base two - logarithm of the window size, in the range 8..15. window is a caller - supplied buffer of that size. Except for special applications where it is - assured that deflate was used with small window sizes, windowBits must be 15 - and a 32K byte window must be supplied to be able to decompress general - deflate streams. - - See inflateBack() for the usage of these routines. - - inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the parameters are invalid, Z_MEM_ERROR if the internal state could not be - allocated, or Z_VERSION_ERROR if the version of the library does not match - the version of the header file. -*/ - -typedef unsigned (*in_func) OF((void FAR *, - z_const unsigned char FAR * FAR *)); -typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); - -ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, - in_func in, void FAR *in_desc, - out_func out, void FAR *out_desc)); -/* - inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is potentially more efficient than - inflate() for file i/o applications, in that it avoids copying between the - output and the sliding window by simply making the window itself the output - buffer. inflate() can be faster on modern CPUs when used with large - buffers. inflateBack() trusts the application to not change the output - buffer passed by the output function, at least until inflateBack() returns. - - inflateBackInit() must be called first to allocate the internal state - and to initialize the state with the user-provided window buffer. - inflateBack() may then be used multiple times to inflate a complete, raw - deflate stream with each call. inflateBackEnd() is then called to free the - allocated state. - - A raw deflate stream is one with no zlib or gzip header or trailer. - This routine would normally be used in a utility that reads zip or gzip - files and writes out uncompressed files. The utility would decode the - header and process the trailer on its own, hence this routine expects only - the raw deflate stream to decompress. This is different from the normal - behavior of inflate(), which expects either a zlib or gzip header and - trailer around the deflate stream. - - inflateBack() uses two subroutines supplied by the caller that are then - called by inflateBack() for input and output. inflateBack() calls those - routines until it reads a complete deflate stream and writes out all of the - uncompressed data, or until it encounters an error. The function's - parameters and return types are defined above in the in_func and out_func - typedefs. inflateBack() will call in(in_desc, &buf) which should return the - number of bytes of provided input, and a pointer to that input in buf. If - there is no input available, in() must return zero--buf is ignored in that - case--and inflateBack() will return a buffer error. inflateBack() will call - out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() - should return zero on success, or non-zero on failure. If out() returns - non-zero, inflateBack() will return with an error. Neither in() nor out() - are permitted to change the contents of the window provided to - inflateBackInit(), which is also the buffer that out() uses to write from. - The length written by out() will be at most the window size. Any non-zero - amount of input may be provided by in(). - - For convenience, inflateBack() can be provided input on the first call by - setting strm->next_in and strm->avail_in. If that input is exhausted, then - in() will be called. Therefore strm->next_in must be initialized before - calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called - immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in - must also be initialized, and then if strm->avail_in is not zero, input will - initially be taken from strm->next_in[0 .. strm->avail_in - 1]. - - The in_desc and out_desc parameters of inflateBack() is passed as the - first parameter of in() and out() respectively when they are called. These - descriptors can be optionally used to pass any information that the caller- - supplied in() and out() functions need to do their job. - - On return, inflateBack() will set strm->next_in and strm->avail_in to - pass back any unused input that was provided by the last in() call. The - return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR - if in() or out() returned an error, Z_DATA_ERROR if there was a format error - in the deflate stream (in which case strm->msg is set to indicate the nature - of the error), or Z_STREAM_ERROR if the stream was not properly initialized. - In the case of Z_BUF_ERROR, an input or output error can be distinguished - using strm->next_in which will be Z_NULL only if in() returned an error. If - strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning - non-zero. (in() will always be called before out(), so strm->next_in is - assured to be defined if out() returns non-zero.) Note that inflateBack() - cannot return Z_OK. -*/ - -ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); -/* - All memory allocated by inflateBackInit() is freed. - - inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream - state was inconsistent. -*/ - -ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -/* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: - 1.0: size of uInt - 3.2: size of uLong - 5.4: size of voidpf (pointer) - 7.6: size of z_off_t - - Compiler, assembler, and debug options: - 8: DEBUG - 9: ASMV or ASMINF -- use ASM code - 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention - 11: 0 (reserved) - - One-time table building (smaller code, but not thread-safe if true): - 12: BUILDFIXED -- build static block decoding tables when needed - 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed - 14,15: 0 (reserved) - - Library content (indicates missing functionality): - 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking - deflate code when not needed) - 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect - and decode gzip streams (to avoid linking crc code) - 18-19: 0 (reserved) - - Operation variations (changes in library functionality): - 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate - 21: FASTEST -- deflate algorithm with only one, lowest compression level - 22,23: 0 (reserved) - - The sprintf variant used by gzprintf (zero is best): - 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format - 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! - 26: 0 = returns value, 1 = void -- 1 means inferred string length returned - - Remainder: - 27-31: 0 (reserved) - */ - -#ifndef Z_SOLO - - /* utility functions */ - -/* - The following utility functions are implemented on top of the basic - stream-oriented functions. To simplify the interface, some default options - are assumed (compression level and memory usage, standard memory allocation - functions). The source code of these utility functions can be modified if - you need special options. -*/ - -ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before a - compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be large enough to hold the entire - uncompressed data. (The size of the uncompressed data must have been saved - previously by the compressor and transmitted to the decompressor by some - mechanism outside the scope of this compression library.) Upon exit, destLen - is the actual size of the uncompressed buffer. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In - the case where there is not enough room, uncompress() will fill the output - buffer with the uncompressed data up to that point. -*/ - - /* gzip file access functions */ - -/* - This library supports reading and writing files in gzip (.gz) format with - an interface similar to that of stdio, using the functions that start with - "gz". The gzip format is different from the zlib format. gzip is a gzip - wrapper, documented in RFC 1952, wrapped around a deflate stream. -*/ - -typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ - -/* -ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); - - Opens a gzip (.gz) file for reading or writing. The mode parameter is as - in fopen ("rb" or "wb") but can also include a compression level ("wb9") or - a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only - compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' - for fixed code compression as in "wb9F". (See the description of - deflateInit2 for more information about the strategy parameter.) 'T' will - request transparent writing or appending with no compression and not using - the gzip format. - - "a" can be used instead of "w" to request that the gzip stream that will - be written be appended to the file. "+" will result in an error, since - reading and writing to the same gzip file is not supported. The addition of - "x" when writing will create the file exclusively, which fails if the file - already exists. On systems that support it, the addition of "e" when - reading or writing will set the flag to close the file on an execve() call. - - These functions, as well as gzip, will read and decode a sequence of gzip - streams in a file. The append function of gzopen() can be used to create - such a file. (Also see gzflush() for another way to do this.) When - appending, gzopen does not test whether the file begins with a gzip stream, - nor does it look for the end of the gzip streams to begin appending. gzopen - will simply append a gzip stream to the existing file. - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. When - reading, this will be detected automatically by looking for the magic two- - byte gzip header. - - gzopen returns NULL if the file could not be opened, if there was - insufficient memory to allocate the gzFile state, or if an invalid mode was - specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). - errno can be checked to determine if the reason gzopen failed was that the - file could not be opened. -*/ - -ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -/* - gzdopen associates a gzFile with the file descriptor fd. File descriptors - are obtained from calls like open, dup, creat, pipe or fileno (if the file - has been previously opened with fopen). The mode parameter is as in gzopen. - - The next call of gzclose on the returned gzFile will also close the file - descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor - fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, - mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. If you are using fileno() to get the - file descriptor from a FILE *, then you will have to use dup() to avoid - double-close()ing the file descriptor. Both gzclose() and fclose() will - close the associated file descriptor, so they need to have different file - descriptors. - - gzdopen returns NULL if there was insufficient memory to allocate the - gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not - provided, or '+' was provided), or if fd is -1. The file descriptor is not - used until the next gz* read, write, seek, or close operation, so gzdopen - will not detect if fd is invalid (unless fd is -1). -*/ - -ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); -/* - Set the internal buffer size used by this library's functions. The - default buffer size is 8192 bytes. This function must be called after - gzopen() or gzdopen(), and before any other calls that read or write the - file. The buffer memory allocation is always deferred to the first read or - write. Two buffers are allocated, either both of the specified size when - writing, or one of the specified size and the other twice that size when - reading. A larger buffer size of, for example, 64K or 128K bytes will - noticeably increase the speed of decompression (reading). - - The new buffer size also affects the maximum length for gzprintf(). - - gzbuffer() returns 0 on success, or -1 on failure, such as being called - too late. -*/ - -ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. If - the input file is not in gzip format, gzread copies the given number of - bytes into the buffer directly from the file. - - After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream. Any number of gzip streams may be - concatenated in the input file, and will all be decompressed by gzread(). - If something other than a gzip stream is encountered after a gzip stream, - that remaining trailing garbage is ignored (and no error is returned). - - gzread can be used to read a gzip file that is being concurrently written. - Upon reaching the end of the input, gzread will return with the available - data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then - gzclearerr can be used to clear the end of file indicator in order to permit - gzread to be tried again. Z_OK indicates that a gzip stream was completed - on the last gzread. Z_BUF_ERROR indicates that the input file ended in the - middle of a gzip stream. Note that gzread does not return -1 in the event - of an incomplete gzip stream. This error is deferred until gzclose(), which - will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip - stream. Alternatively, gzerror can be used before gzclose to detect this - case. - - gzread returns the number of uncompressed bytes actually read, less than - len for end of file, or -1 for error. -*/ - -ZEXTERN int ZEXPORT gzwrite OF((gzFile file, - voidpc buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes written or 0 in case of - error. -*/ - -ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the arguments to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written, or 0 in case of error. The number of - uncompressed bytes written is limited to 8191, or one less than the buffer - size given to gzbuffer(). The caller should assure that this limit is not - exceeded. If it is exceeded, then gzprintf() will return an error (0) with - nothing written. In this case, there may also be a buffer overflow with - unpredictable consequences, which is possible only if zlib was compiled with - the insecure functions sprintf() or vsprintf() because the secure snprintf() - or vsnprintf() functions were not available. This can be determined using - zlibCompileFlags(). -*/ - -ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or a - newline character is read and transferred to buf, or an end-of-file - condition is encountered. If any characters are read or if len == 1, the - string is terminated with a null character. If no characters are read due - to an end-of-file or len < 1, then the buffer is left untouched. - - gzgets returns buf which is a null-terminated string, or it returns NULL - for end-of-file or in case of error. If there was an error, the contents at - buf are indeterminate. -*/ - -ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. gzputc - returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte or -1 - in case of end of file or error. This is implemented as a macro for speed. - As such, it does not do all of the checking the other functions do. I.e. - it does not check to see if file is NULL, nor whether the structure file - points to has been clobbered or not. -*/ - -ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -/* - Push one character back onto the stream to be read as the first character - on the next read. At least one character of push-back is allowed. - gzungetc() returns the character pushed, or -1 on failure. gzungetc() will - fail if c is -1, and may fail if a character has been pushed but not read - yet. If gzungetc is used immediately after gzopen or gzdopen, at least the - output buffer size of pushed characters is allowed. (See gzbuffer above.) - The pushed character will be discarded if the stream is repositioned with - gzseek() or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter flush - is as in the deflate() function. The return value is the zlib error number - (see function gzerror below). gzflush is only permitted when writing. - - If the flush parameter is Z_FINISH, the remaining data is written and the - gzip stream is completed in the output. If gzwrite() is called again, a new - gzip stream will be started in the output. gzread() is able to read such - concatented gzip streams. - - gzflush should be called only when strictly necessary because it will - degrade compression if called too often. -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, - z_off_t offset, int whence)); - - Sets the starting position for the next gzread or gzwrite on the given - compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); - - Returns the starting position for the next gzread or gzwrite on the given - compressed file. This position represents a number of bytes in the - uncompressed data stream, and is zero when starting, even if appending or - reading a gzip stream from the middle of a file using gzdopen(). - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); - - Returns the current offset in the file being read or written. This offset - includes the count of bytes that precede the gzip stream, for example when - appending or when using gzdopen() for reading. When reading, the offset - does not include as yet unused buffered input. This information can be used - for a progress indicator. On error, gzoffset() returns -1. -*/ - -ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -/* - Returns true (1) if the end-of-file indicator has been set while reading, - false (0) otherwise. Note that the end-of-file indicator is set only if the - read tried to go past the end of the input, but came up short. Therefore, - just like feof(), gzeof() may return false even if there is no more data to - read, in the event that the last read request was for the exact number of - bytes remaining in the input file. This will happen if the input file size - is an exact multiple of the buffer size. - - If gzeof() returns true, then the read functions will return no more data, - unless the end-of-file indicator is reset by gzclearerr() and the input file - has grown since the previous end of file was detected. -*/ - -ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -/* - Returns true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. - - If the input file is empty, gzdirect() will return true, since the input - does not contain a gzip stream. - - If gzdirect() is used immediately after gzopen() or gzdopen() it will - cause buffers to be allocated to allow reading the file to determine if it - is a gzip file. Therefore if gzbuffer() is used, it should be called before - gzdirect(). - - When writing, gzdirect() returns true (1) if transparent writing was - requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: - gzdirect() is not needed when writing. Transparent writing must be - explicitly requested, so the application already knows the answer. When - linking statically, using gzdirect() will include all of the zlib code for - gzip file reading and decompression, which may not be desired.) -*/ - -ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file and - deallocates the (de)compression state. Note that once file is closed, you - cannot call gzerror with file, since its structures have been deallocated. - gzclose must not be called more than once on the same file, just as free - must not be called more than once on the same allocation. - - gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the - last read ended in the middle of a gzip stream, or Z_OK on success. -*/ - -ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); -ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); -/* - Same as gzclose(), but gzclose_r() is only for use when reading, and - gzclose_w() is only for use when writing or appending. The advantage to - using these instead of gzclose() is that they avoid linking in zlib - compression or decompression code that is not used when only reading or only - writing respectively. If gzclose() is used, then both compression and - decompression code will be included the application when linking to a static - zlib library. -*/ - -ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the given - compressed file. errnum is set to zlib error number. If an error occurred - in the file system and not in the compression library, errnum is set to - Z_ERRNO and the application may consult errno to get the exact error code. - - The application must not modify the returned string. Future calls to - this function may invalidate the previously returned string. If file is - closed, then the string previously returned by gzerror will no longer be - available. - - gzerror() should be used to distinguish errors from end-of-file for those - functions above that do not distinguish those cases in their return values. -*/ - -ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -/* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - -#endif /* !Z_SOLO */ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the compression - library. -*/ - -ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is Z_NULL, this function returns the - required initial value for the checksum. - - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. - - Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, - z_off_t len2)); - - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note - that the z_off_t type (like off_t) is a signed integer. If len2 is - negative, the result has no meaning or utility. -*/ - -ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -/* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is Z_NULL, this function returns the required - initial value for the crc. Pre- and post-conditioning (one's complement) is - performed within this function so it shouldn't be done by the application. - - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); - - Combine two CRC-32 check values into one. For two sequences of bytes, - seq1 and seq2 with lengths len1 and len2, CRC-32 check values were - calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 - check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and - len2. -*/ - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, - unsigned char FAR *window, - const char *version, - int stream_size)); -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ - (int)sizeof(z_stream)) -#define inflateBackInit(strm, windowBits, window) \ - inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, (int)sizeof(z_stream)) - -#ifndef Z_SOLO - -/* gzgetc() macro and its supporting function and exposed data structure. Note - * that the real internal state is much larger than the exposed structure. - * This abbreviated structure exposes just enough for the gzgetc() macro. The - * user should not mess with these exposed elements, since their names or - * behavior could change in the future, perhaps even capriciously. They can - * only be used by the gzgetc() macro. You have been warned. - */ -struct gzFile_s { - unsigned have; - unsigned char *next; - z_off64_t pos; -}; -ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ -#ifdef Z_PREFIX_SET -# undef z_gzgetc -# define z_gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) -#else -# define gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) -#endif - -/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or - * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if - * both are true, the application gets the *64 functions, and the regular - * functions are changed to 64 bits) -- in case these are set on systems - * without large file support, _LFS64_LARGEFILE must also be true - */ -#ifdef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); - ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); -#endif - -#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) -# ifdef Z_PREFIX_SET -# define z_gzopen z_gzopen64 -# define z_gzseek z_gzseek64 -# define z_gztell z_gztell64 -# define z_gzoffset z_gzoffset64 -# define z_adler32_combine z_adler32_combine64 -# define z_crc32_combine z_crc32_combine64 -# else -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# endif -# ifndef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); -# endif -#else - ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); -#endif - -#else /* Z_SOLO */ - - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); - -#endif /* !Z_SOLO */ - -/* hack for buggy compilers */ -#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; -#endif - -/* undocumented functions */ -ZEXTERN const char * ZEXPORT zError OF((int)); -ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); -ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); -ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); -ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); -ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); -#if defined(_WIN32) && !defined(Z_SOLO) -ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, - const char *mode)); -#endif -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, - const char *format, - va_list va)); -# endif -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ZLIB_H */ |